OBJECTIVE: To evaluate the filling quality of single cone obturation in root canal model with irregular structure (Hus&Kim Ⅴ, Yin Ⅱ-type isthmus) which established by 3D printing technology using slices and radiographic methods, in order to provide reference for clinical practice. METHODS: (1) Extracted fresh premolars with Hus&Kim Ⅴ and Yin-type Ⅱ isthmus were collected and scanned by cone-beam computed tomography (CBCT), then standard root canal models were designed and printed. Rhodamine B staining and bias fitting were used to verify the availability of the models. (2) 30 root canal models were randomly divided into 3 groups according to different filling methods (n=10). CONTROL GROUP: vertical compaction obturation; Experimental group 1: single cone obturation with 0.06-taper cone (30#); Experimental group 2: single cone obturation with 0.04-taper cone (35#), GuttaFlow 2 as canal sealers. Slices were taken at 2, 4, 6, and 8 mm from the root apex in the direction perpendicular to the long axis of the root and observed under a stereomicroscope to calculate the percentage of filling area (PAV), percentage of gutta-percha-filled area (PGFA), percentage of sealer filled area (PSFA). (3) On the basis of the above results, two groups (n=4) were selected to further analyze the filling quality by micro-computed tomography (Micro-CT), the filling volume of main root canal and the isthmus were obtained, and the percentage of filling volume (PFV) was calculated. Two-way ANOVA was used to evaluate the differences between the groups, and Tukey' s multiple comparison was used to compare the data between the groups and within the groups. RESULTS: (1) Rhodamine B staining solution could overflow the apical foramen, and the main root canal system and the isthmus area were stained, showed no remnants of support material. The 3D standard deviation of the printed model data was 0.03 mm, and the average fitting distance was 0.02 mm. (2) The PFA of the two experimental groups were both significantly lower than that of the control group (F=45.04, P < 0.01). There was no statistical difference of the PFA at apical 2 and 4 mm between the two experimental groups (P>0.01), but at the middle and coronal portions of the root canal (6, 8 mm), the PFA of the experimental group 1 was higher than that of the experimental group 2 (P < 0.01). PFA in the apical 2, 4 mm of the two experimental groups were both lower than that in the middle and coronal portions 6, 8 mm of the canal (P < 0.01). There was no difference in the PGFA and PSFA between the two experimental groups at the apical 2, 4 mm (F=2.383, P>0.01). (3) The results of Micro-CT showed that the PFV of the experimental group 1 was statistically different with the control group (F=47.33, P < 0.01). The PFV of the experimental group 1 was 54.33%±4.35% in the isthmus and 78.31%±4.21% in the main root canal, which were both lower than the PFV of the control group of 76.48%±4.89% (isthmus) and 86.90%±3.29% (main root canal, P < 0.01). The PFV of the main root canal in the experimental group 1 was higher than that in the isthmus (P < 0.01), while there was no difference between the isthmus and the main root canal in the control group (P>0.01). CONCLUSION In the irregular root canal structure with isthmus, using large-taper gutta-percha can improve the filling quality of the middle and upper part of the canal, but the percentage of filling volume in the isthmus is lower than that of the main canal, and more technical improvements are needed.
Humans ; Root Canal Obturation/methods* ; Cone-Beam Computed Tomography ; Root Canal Filling Materials ; Dental Pulp Cavity/diagnostic imaging* ; Printing, Three-Dimensional ; In Vitro Techniques ; Gutta-Percha ; Bicuspid

OBJECTIVES: Through the investigation of the microhardness and microstructure of permanent tooth enamel at various eruption stages during childhood, this research offers references for the early prevention of childhood dental caries. METHODS: Forty-five premolars extracted due to orthodontic reasons were collected and screened. These premolars were divided into three experimental groups according to the time since eruption: Group A (erupted for 0-1 year), Group B (erupted for 1-3 years), and Group C (erupted for 3-5 years). Additionally, the third molars that were extracted due to impaction and had not erupted were selected as the control group, with 15 teeth in each group. Samples were prepared, and the surface microhardness, microstructure, and elemental composition of the enamel were measured using Vickers microhardness tester, scanning electron microscope, and electron probe, respectively. RESULTS: Compared with that in the control group, the microhardness of enamel in groups A, B, and C increased with prolonged eruption time, the surface porosity structure decreased considerably, the contents of Na and Mg on the surface decreased, and that of F increased (P<0.05). CONCLUSIONS The microhardness and microstructure of enamel in permanent teeth at different stages vary. Permanent teeth are at a substantially higher risk of caries within one year after eruption, and early prevention should be emphasized.
Dental Enamel/ultrastructure* ; Humans ; Hardness ; Dental Caries/prevention & control* ; Microscopy, Electron, Scanning ; Tooth Eruption ; Bicuspid/chemistry* ; Dentition, Permanent ; Child ; Child, Preschool

OBJECTIVES: This study aimed to evaluate the filling effects of three biomaterial root canal sealers [iRoot SP, C-Root SP, and GuttaFlow Bioseal (GFB)] by using Micro-CT. METHODS: Sixty single-canal detached premolars were selected. After crown amputation, their uniform working length was set at 12 mm and prepared to a 06 taper 30# with M3 nickel-titanium file. The samples were randomly divided into six groups with different sealers and obturation techniques: iRoot SP+single-cone technique (SC), C-Root SP+SC, GFB+SC, iRoot SP+single cone-mediated ultrasonic technique (SU), C-Root SP+SU, and GFB+SU. Samples were scanned by Micro-CT, and the total and segmented filling rates were calculated with Mimics 22.0 software after 3D reconstruction. RESULTS: The overall filling rate of the three biomaterial root canal sealers was higher than 90%. The overall and coronal third and middle third segment filling rate of groups iRoot SP+SC, C-Root SP+SC was higher than that of group GFB+SC (P<0.01), with no significant difference between groups iRoot SP+SC and C-Root SP+SC (P>0.05). On the apical third, no significant difference was found among each group (P>0.05). The overall and segment filling rate of groups iRoot SP+SU and C-Root SP+SU was higher than that of GFB+SU (P<0.01), with no significant difference between groups iRoot SP+SU and C-Root SP+SU (P>0.05). The filling rate of the apical 1/3 of group C-Root+SC was lower than that of group C-Root+SU (P<0.01), and the filling rate of the coronal 1/3 of group GFB+SC was higher than that in the GFB+SU (P<0.01). Nevertheless, no significant difference was found in other filling rate of two obturation techniques (P>0.05). CONCLUSIONS The overall filling rate of the three biomaterial root canal sealers using SC and SU are satisfactory. iRoot SP and C-Root SP have similar filling rates, which are significantly higher than that of GFB. C-Root SP combined with SU technique can improve the filling quality of the root apical.
Root Canal Filling Materials ; X-Ray Microtomography ; Humans ; Root Canal Obturation/methods* ; Gutta-Percha ; Dimethylpolysiloxanes ; Drug Combinations ; Dental Pulp Cavity/diagnostic imaging* ; Bicuspid

OBJECTIVES: This study aimed to construct the finite element model of the mandibular first molar with the invisible appliance and explore the dentition movement characteristics of the mandibular first molar when using micro-implant anchorage and different initial positions of the first molar. METHODS: Models of the mandible, tooth, periodontal membrane, and invisible appliance were constructed using cone beam computed tomography (CBCT) data. The two groups were divided into the non-anchorage group and the micro-implant group (between the roots of the first molar and the second molar) based on whether the elastic traction of the micro-implant was assisted or not. The two groups were divided into the following conditions based on the starting position of the first molar: Working condition 1: the distance between the first molar and the second premolar was 0 mm; working condition 2: the distance between the first molar and the second premolar was 1 mm; working condition 3: the distance between the first molar and the second premolar was 2 mm; working condition 4: the distance between the first molar and the second premolar was 3 mm. The data characte-ristics of total displacement and displacement in each direction of dentition were analyzed. RESULTS: In the non-ancho-rage group, all the other teeth showed reverse movement except for the first molar which was moved distally. Meanwhile, in the micro-implant group, except for a small amount of mesial movement of the second molar in wor-king condition 1, the whole dentition in other working conditions presented distal movement and anterior teeth showed lingual movement, among which the distal displacement of the first molar in working condition 4 was the largest. With the change of the initial position of the first molar to the distal, the movement of the first molar to the distal, the premolar to the mesial, and the anterior to the lip increased, while the movement of the second molar to the mesial decreased. CONCLUSIONS The micro-implant can effectively protect the anterior anchorage, increase the expression rate of molar distancing, and avoid the round-trip movement of the second molar. The initial position of the first molar movement is related to the amount of distancing and the remaining tooth movement.
Finite Element Analysis ; Molar ; Bicuspid ; Periodontal Ligament ; Tooth Movement Techniques/methods* ; Orthodontic Appliances, Removable

OBJECTIVES: This study aimed to explore the stress distribution of surface-mounted inlays with two ceramic materials and different strategies for fiber post-restoration on pulp-penetrating non-carious cervical lesion in a maxillary first premolar to provide minimally invasive and reasonable restorative methods. METHODS: The cone beam computed tomography data of the standard right upper first premolar were selected. Healthy control (HC) and defective control (DC) finite element models were established. Then, eight experimental models were established according to two different ceramic materials (IPS e.max CAD [LD] and Lava Ultimate [LU]) and different locations of fiber post (without fiber post [NP], fiber post in buccal root canal [B], fiber post in palatal root canal [P], fiber post in both root canals [BP]), namely, LD_NP, LD_B, LD_P, LD_BP, LU_NP, LU_B, LU_P, and LU_BP. Axial load F1 and lateral load F2 were applied. Maximum principal stress and displacement of the buccal tip were investigated using finite element analysis software. Then, the percentage change of the following indicators in each experimental group was analyzed: stress of defective tip with group DC, stress of enamel and dentine, and displacement of buccal tips with group HC. It was considered similar when the percentage change was less than 5%. RESULTS: LD and LU groups could effectively reduce the stress of the defective tip, but the decreasing amplitude in the former was greater than that of the latter. For the stress of surface-mounted inlays and resin adhesive layer, LD groups were higher than LU groups, and no significant difference in stress peak was found among different experimental groups in the same material. In addition, fiber posts in double root canals could significantly reduce buccal tip displacement. CONCLUSIONS For pulp-penetrating non-carious cervical lesions, the restorative strategy of surface-mounted inlays could be applied. Compared with Lava Ultimate, IPS e.max CAD could better protect the defective tip tooth. Furthermore, fiber posts in double root canals could decrease overall deformation and increase the retention of surface-mounted inlays.
Inlays ; Finite Element Analysis ; Composite Resins ; Bicuspid ; Ceramics ; Dental Stress Analysis

OBJECTIVES: This study aimed to remove occlusal veneers of varied thicknesses and compositions by Er:Yag laser in vitro and analyze the interfacial microstructure between veneers and tooth that irradiated by laser, by which experimental evidence could be provided to support the non-invasive removal of occlusal veneerby laser. METHODS: Fresh mandibular premolars extracted for orthodontic requirements were collected for tooth preparation. Three kinds of ceramic materials (Vita Suprinity, Vita Mark Ⅱ, and Upcera Hyramic) were selected to fabricate occlusal veneer with different thicknesses (1.0, 1.5, and 2.0 mm). One week later, Er:Yag laser (2.5 W and 3.5 W) was used to irradiate and remove the occlusal veneer and recorded the timespan. After the removal operation, the micro-morphologies of samples were examined by scanning electron microscope. RESULTS: Upcera Hyramic veneer failed to be removed (>20 min); the operation span at 2.5 W, Vita Suprinity (96.0 s±16.0 s) was longer than Vita MarkⅡ(84.5 s±19.5 s) in the 1.0 mm group (P<0.05), and Vita Suprinity (246.5 s±13.5 s) was longer than Vita MarkⅡ(170.0 s±14.0 s) in the 1.5 mm group (P<0.05). At 3.5 W, Vita Suprinity (381.0 s±24.0 s) was longer than Vita MarkⅡ(341.5 s±26.5 s) in the 2.0 mm group. CONCLUSIONS Increasing laser power could shorten the operation span and facilitate the removal of occlusal veneers with the same thickness and composition. The occlusal veneer was sustained when insufficient laser power was applied. With the same laser power and ceramic thickness, laser penetration could interfere with the integral of the ceramic structure when the laser interacted with the bonding layer. With the same ceramic composition and laser power, the operation span and laser power increased with the thickness of the occlusal veneer. However, the laser was incapable of removing occlusal resin veneer directly.
Lasers, Solid-State ; Materials Testing ; Dental Porcelain/chemistry* ; Ceramics/chemistry* ; Bicuspid ; Dental Veneers

It is a basic prerequisite for the successful completion of endodontic treatment to thoroughly understand the root canal space anatomy. With the development of dental devices in dentistry, the root canal morphology of the mandibular first premolars can be presented in more detail. Before conducting root canal therapy on the mandibular first premolar with complex root canal morphology, it should be necessary to evaluate the potential difficulties and risks for making an appropriate treatment plan. The present paper reviews the research progress on the diversities of root canal morphology in mandibular first premolars in recent years, and then makes technologic recommendations based on the morphology diversities.
Humans ; Dental Pulp Cavity/diagnostic imaging* ; Bicuspid/anatomy & histology* ; Mandible ; Tooth Root/anatomy & histology* ; Root Canal Therapy

OBJECTIVE: To investigate the efficacy of vertical control by using conventional mini-implant anchorage in maxillary posterior buccal area for Angle class Ⅱ extraction patients. METHODS: Twenty-eight Angle class Ⅱ patients [9 males, 19 females, and age (22.6±2.8) years] were selected in this study. All of these patients were treated by using straight wire appliance with 4 premolars extraction and 2 mini-implant anchorage in maxillary posterior buccal area. In this study, the self-control method was used to measure and analyze the lateral radiographs taken before and after orthodontic treatment in each case, the main cephalometric analysis items were related to vertical changes. The digitized lateral radiographs were imported into Dolphin Imaging Software (version 11.5: Dolphin Imaging and Management Solutions, Chatsworth, California, USA), and marked points were traced. Each marked point was confirmed by two orthodontists. The same orthodontist performed measurement on the lateral radiographs over a period of time. All measurement items were required to be measured 3 times, and the average value was taken as the final measurement result. RESULTS: Analysis of the cephalometric radiographs showed that, for vertical measurements after treatment, the differences of the following measurements were highly statistically significant (P < 0.001): SN-MP decreased by (1.40±1.45) degrees on average, FMA decreased by (1.58±1.32) degrees on average, the back-to-front height ratio (S-Go/N-Me) decreased by 1.42%±1.43% on average, Y-axis angle decreased by (1.03±0.99) degrees on average, face angle increases by (1.37±1.05) degree on average; The following measurements were statistically significant (P < 0.05): the average depression of the upper molars was (0.68±1.40) mm, and the average depression of the upper anterior teeth was (1.07±1.55) mm. The outcomes indicated that there was a certain degree of upper molar depression after the treatment, which produced a certain degree of counterclockwise rotation of the mandibular plane, resulting in a positive effect on the improvement of the profile. CONCLUSION The conventional micro-implant anchorage in maxillary posterior buccal area has a certain vertical control ability, and can give rise to a certain counterclockwise rotation of the mandible, which would improve the profile of Angle Class Ⅱ patients.
Bicuspid ; Cephalometry/methods* ; Female ; Humans ; Male ; Malocclusion, Angle Class II/therapy* ; Mandible ; Maxilla/diagnostic imaging* ; Orthodontic Anchorage Procedures ; Tooth Movement Techniques ; Vertical Dimension

Humans ; Bicuspid ; Dental Pulp Cavity ; Root Canal Therapy ; Tooth Root ; Mandible

Objective: To investigate the effects of straight-line minimally invasive access cavity on the mechanical properties of endodontically treated maxillary first premolars using finite element analysis. Methods: Micro-CT data of twenty maxillary first premolars were collected for three-dimensional reconstruction. Three access cavities, including the conventional access cavity (ConvAC), the truss access cavity (TrussAC) and the straight-line minimally invasive access cavity (SMIAC), as well as the root canal treatment procedure, were simulated in all the 20 reconstruction samples of three-dimensional models, respectively. The peak von Mises stress on the cervical area of each model, as well as the stress distribution under vertical and oblique loading circumstances, were subsequently determined by using finite element analysis. Results: In comparison to the stresses of ConvAC [buccal cervical (BC): (188.7±13.4) MPa, palatal cervical (PC): (200.9±25.7) MPa], the stresses of TrussAC [BC: (146.0±12.9) MPa, PC: (167.6±15.9) MPa] (t=9.01, P<0.001; t=4.59, P<0.001) and SMIAC [BC: (142.6±13.7) MPa, PC: (168.1±17.4) MPa] (t=9.64, P<0.001; t=3.76, P=0.004) significantly reduced the peak von Mises stress on the cervical area of the maxillary first premolars after root canal treatment. Under vertical loading conditions, SMIAC also reduced the central tendency of stresses on the occlusal surface, cervical area and root. In the case of oblique loading conditions, similar results were observed. Under both loading conditions, there was no significant difference in the peak von Mises stress on the cervical area of the maxillary first premolar between TrussAC and SMIAC groups. Conclusions: The design of SMIAC could preserve the mechanical properties of the maxillary first premolar following root canal treatment, which might have certain clinical feasibility.
Bicuspid ; Dental Stress Analysis ; Finite Element Analysis ; Root Canal Therapy ; Stress, Mechanical ; X-Ray Microtomography