Objective To investigate the relationship between prolactin and mild cognitive impairment(MCI)in postmenopausal women with type 2 diabetes mellitus(T2DM).Methods A total of 319 postmenopausal women with T2DM who were hospitalized in the Department of Endocrinology,Drum Tower Hospital,Affiliated Hospital of Medical School,Nanjing University were enrolled in this study from August 2016 to October 2023.All the patients were divided into two groups according whether they had MCI:T2DM group(n=161)and MCI group(n=158).Differences in clinical characteristics were compared between the two groups.Pearson correlation was used to analyze the correlation between sex hormones and cognitive domains,and Logistic regression analysis was used to evaluate the influencing factors for MCI development.Results Serum prolactin levels were significantly lower in the MCI group than in the T2DM group[(5.5±2.1)vs(7.2±2.9)μg/L,P<0.05].Serum prolactin level was positively correlated with mini-mental state examination score,Montreal cognitive assessment score,immediate memory score,visuopatial constructional score,attention score and hippocampal volume(P<0.05),and negatively correlated with processing speed test(time)and executive function test(time)(P<0.05).Logistic regression analysis demonstrated that serum prolactin level was an influencing factor for the risk of MCI in postmenopausal women with T2DM(OR 0.715,95%CI 0.605～0.845,P<0.01).Conclusions The decrease of serum prolactin level is associated with an increased risk of MCI in postmenopausal women with T2DM.

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Objective To investigate the relationship between prolactin and mild cognitive impairment(MCI)in postmenopausal women with type 2 diabetes mellitus(T2DM).Methods A total of 319 postmenopausal women with T2DM who were hospitalized in the Department of Endocrinology,Drum Tower Hospital,Affiliated Hospital of Medical School,Nanjing University were enrolled in this study from August 2016 to October 2023.All the patients were divided into two groups according whether they had MCI:T2DM group(n=161)and MCI group(n=158).Differences in clinical characteristics were compared between the two groups.Pearson correlation was used to analyze the correlation between sex hormones and cognitive domains,and Logistic regression analysis was used to evaluate the influencing factors for MCI development.Results Serum prolactin levels were significantly lower in the MCI group than in the T2DM group[(5.5±2.1)vs(7.2±2.9)μg/L,P<0.05].Serum prolactin level was positively correlated with mini-mental state examination score,Montreal cognitive assessment score,immediate memory score,visuopatial constructional score,attention score and hippocampal volume(P<0.05),and negatively correlated with processing speed test(time)and executive function test(time)(P<0.05).Logistic regression analysis demonstrated that serum prolactin level was an influencing factor for the risk of MCI in postmenopausal women with T2DM(OR 0.715,95%CI 0.605～0.845,P<0.01).Conclusions The decrease of serum prolactin level is associated with an increased risk of MCI in postmenopausal women with T2DM.

ObjectiveThis study leverages structural data from antigen-antibody complexes of the influenza A virus neuraminidase (NA) protein to investigate the spatial recognition relationship between the antigenic epitopes and antibody paratopes. MethodsStructural data on NA protein antigen-antibody complexes were comprehensively collected from the SAbDab database, and processed to obtain the amino acid sequences and spatial distribution information on antigenic epitopes and corresponding antibody paratopes. Statistical analysis was conducted on the antibody sequences, frequency of use of genes, amino acid preferences, and the lengths of complementarity determining regions (CDR). Epitope hotspots for antibody binding were analyzed, and the spatial structural similarity of antibody paratopes was calculated and subjected to clustering, which allowed for a comprehensively exploration of the spatial recognition relationship between antigenic epitopes and antibodies. The specificity of antibodies targeting different antigenic epitope clusters was further validated through bio-layer interferometry (BLI) experiments. ResultsThe collected data revealed that the antigen-antibody complex structure data of influenza A virus NA protein in SAbDab database were mainly from H3N2, H7N9 and H1N1 subtypes. The hotspot regions of antigen epitopes were primarily located around the catalytic active site. The antibodies used for structural analysis were primarily derived from human and murine sources. Among murine antibodies, the most frequently used V-J gene combination was IGHV1-12*01/IGHJ2*01, while for human antibodies, the most common combination was IGHV1-69*01/IGHJ6*01. There were significant differences in the lengths and usage preferences of heavy chain CDR amino acids between antibodies that bind within the catalytic active site and those that bind to regions outside the catalytic active site. The results revealed that structurally similar antibodies could recognize the same epitopes, indicating a specific spatial recognition between antibody and antigen epitopes. Structural overlap in the binding regions was observed for antibodies with similar paratope structures, and the competitive binding of these antibodies to the epitope was confirmed through BLI experiments. ConclusionThe antigen epitopes of NA protein mainly ditributed around the catalytic active site and its surrounding loops. Spatial complementarity and electrostatic interactions play crucial roles in the recognition and binding of antibodies to antigenic epitopes in the catalytic region. There existed a spatial recognition relationship between antigens and antibodies that was independent of the uniqueness of antibody sequences, which means that antibodies with different sequences could potentially form similar local spatial structures and recognize the same epitopes.

Objective To explore the impact of different delay time of umbilical cord ligation on the outcome of preterm infants.Methods A total of 266 preterm infants born in the obstetric department of this hospital from January 2021 to December 2022 were selected as the research subjects and divided into the in-stant group(umbilical cord ligation immediately after birth,n=53),30 s group(delayed umbilical cord liga-tion for 30 s,n=50),60 s group(delayed umbilical cord ligation for 60 s,n=55),90 s group(delayed umbili-cal cord ligation for 90 s,n=55)and 120 s group(delayed umbilical cord ligation for 120 s,n=52)according to the random number table method.The Hb and HCT levels and the incidence rates of anemia,blood transfu-sion,hyperbilirubinemia,intracranial hemorrhage,necrotizing enterocolitis(NEC)and bronchopulmonary dys-plasia(BPD)after birth were compared among 5 groups.Results The Hb and HCT levels at 24 h after birth in the 60,90,120 s groups were higher than those in the instant group and 30 s group,moreover the 120 s group was higher than the 60 s group and 90 s group,and the differences were statistically significant(P＜0.05).The anemia incidence rate and blood transfusion rate in the 60,90,120 s groups were lower than those in the instant group and 30 s group,and the differences were statistically significant(P＜0.05).The hyperbil-irubinemia incidence rate in the 120 s group was higher than that in the other 4 groups,and the difference was statistically significant(P＜0.05).The intracranial hemorrhage incidence rate in the 60,90,120 s groups were lower than those in the instant group and 30 s group,and the differences were statistically significant(P＜0.05).The NEC incidence rate in the 60 s and 90 s group was lower than that in the instant group and 30 s group,but the 120 s group was higher than that in the other 4 groups,and the differences were statistically significant(P＜0.05).The BPD incidence rate had no statistical difference among 5 groups(P＞0.05).Con-clusion Delayed umbilical cord ligation for 60 s or 90 s could improve the outcomes of preterm infants.

Objective:To evaluate the therapeutic role of balanced matching concept in the surgical release of moderate and severe elbow stiffness after trauma.Methods:A retrospective study was conducted to analyze the clinical data of 20 patients who had been treated by surgical release from June 2022 to January 2024 for elbow stiffness after moderate and severe trauma at Department of Orthopedic Trauma, The First Hospital Affiliated to Air Force Medical University of PLA using the balanced matching concept (combination of elbow soft tissue balance and bone matching). There were 15 males and 5 females, with an age of (33.0±8.9) years. Six left sides and 14 right sides were affected. The elbow stiffness was severe in 13 cases and moderate in 7 cases. Six patients had mainly bony stiffness, 4 patients mainly soft stiffness, and 10 patients mixed stiffness. The elbow flexion and extension, Mayo elbow performance score (MEPS) and disabilities of the arm, shoulder, and hand (DASH) score were recorded and compared before release and at the last follow-up. The recurrence of ectopic ossification, infection, iatrogenic fracture and other complications of the elbow joint of the affected limb were recorded.Results:All the 20 patients were followed up for (16.6±3.5) months. At the last follow-up, the elbow flexion and extension (121.8°±8.9° and 14.8°±8.2°) were significantly greater than those before operation (73.5°±25.7° and 47.3°±19.2°), and the MEPS and DASH scores [ (90.0±5.6) points, (5.6±3.0) points] were significantly better than those before operation [(53.0±12.8) points, (62.1±14.0) points] ( P<0.05). Iatrogenic fracture of the ulna occurred in 1 patient, and pinky numbness occurred in 1 patient after surgery. None of the patients had recurrence of ectopic ossification or wound infection. Conclusion:In the surgical release of moderate and severe elbow stiffness after trauma, the concept of balanced matching plays a positive role by facilitating the functional restoration of the elbow and reducing the incidence of complications.

OBJECTIVE: To compare the short-term clinical efficacy and safety of closed reduction with Kirschner wire fixation versus open reduction with plate fixation for treating osteoporotic Colles' fractures in middle-aged and elderly patients. METHODS: Between January 2018 and January 2023, 119 patients with Colles fractures were retrospectively analyzed, including 39 males and 80 females, aged from 48 to 74 years old with an average of(60.58±6.71) years old. The time from injury to operation ranged 1 to 13 days with an average of (5.29±2.52) days. According to the surgical method, they were divided into Kirschner wire fixation group (Kirschner wire group) and plate internal fixation group (plate group). In Kirschner wire group, there were a total of 68 patients, comprising 21 males and 47 females. The average age was (61.15±6.24) years old, ranged from 49 to 74 years old. Among them, 41 cases involved the left side while 27 cases involved the right side. In the plate group, there were a total of 51 patients, including 18 males and 33 females. The average age was (59.78±5.71) years old ranged from 48 to 72 years old. Among them, there were 31 cases on the left side and 20 cases on the right side. The following parameters were recorded before and after the operation:operation time, intraoperative blood loss, hospitalization days, hospitalization expenses, postoperative complications, and radiographic parameters of distal radius (distal radius height, ulnar deviation angle, palmar tilt angle). The clinical efficacy was evaluated at 3 and 12 months after the operation using Gartland-Werley and disabilites of the arm shoulder and hand (DASH) scores. RESULTS: The patients in both groups were followed up for a duration from 12 to 19 months with an average of(13.32±2.02) months. The Kirschner wire group exhibited significantly shorter operation time compared to the plate group 27.91(13.00, 42.00) min vs 67.52(29.72, 105.32) min, Z=-8.74, P=0.00. Intraoperative blood loss was also significantly lower in the Kirschner wire group than in the plate group 3.24(1.08, 5.40) ml vs 21.91(17.38, 26.44) ml, Z=-9.31, P=0.00. Furthermore, patients in the Kirschner wire group had a shorter length of hospital stay compared to those in the plate group (8.38±2.63) days vs (11.40±2.78) days, t=-3.12, P=0.00. Additionally, hospitalization cost was significantly lower in the Kirschner wire group than in the plate group 10 111.29(6 738.98, 13 483.60) yuan vs 15 871.11(11 690.40, 20 051.82) yuan, Z=-5.62, P=0.00. The incidence of complications was 2 cases in the Kirschner wire group and 1 case in the plate group, with no statistically significant difference(P>0.05). At 3 months postoprative, the radial height of the Kirschner wire group was found to be significantly smaller than that of the plate group, with measurements of (11.45±1.69) mm and (12.11±1.78) mm respectively (t=-2.06, P=0.04). However, there were no statistically significant differences observed in ulnar deviation angle and palmar tilt angle between the two groups (P>0.05). The DASH score and Gartland-Werley score in the Kirschner group were significantly higher than those in the plate group at 3 months post-operation (19.10±9.89) vs (13.47±3.51), t=4.34, P=0.00;(11.15±3.61) vs (6.41±2.75), t=8.13, P=0.00). However, there was no significant difference between the two groups at 12 months post-operation (P>0.05). CONCLUSION Compared to plate internal fixation, closed reduction with Kirschner wire support fixation yields a slightly inferior recovery of radial height;however, there is no significant disparity in the functional score of the affected limb at 12 months post-operation. Nonetheless, this technique offers advantages such as shorter operation time, reduced intraoperative blood loss, decreased hospitalization duration, and lower cost.
Humans ; Female ; Male ; Middle Aged ; Aged ; Fracture Fixation, Internal/instrumentation* ; Bone Wires ; Bone Plates ; Retrospective Studies ; Colles' Fracture/surgery* ; Minimally Invasive Surgical Procedures/methods* ; Open Fracture Reduction/methods* ; Osteoporotic Fractures/surgery*

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.