Purpose: To investigate long-term topographic progression of the geographic atrophy (GA) area based on location and analyze its correlation with visual acuity in patient with GA secondary to non-neovascular age-related macular degeneration in South Korean patient cohort. Methods: Medical records and imaging data of 58 eyes from 34 patients with GA were retrospectively reviewed using fundus autofluorescence (FAF). Regions of interest were defined as concentric ring-shaped zones with diameters of 1, 2, 3, and 4 mm centered on the fovea (zones 0–3), each subdivided into superior, temporal, inferior, and nasal sectors. The foveal center was determined using optical coherence tomography, and sectoral GA areas were measured on FAF with the semiautomated software (RegionFinder ver. 2.6.2.0). Correlations among GA area enlargement, GA growth rate, and changes in best-corrected visual acuity (BCVA) were evaluated. Results: The mean GA area enlarged from 4.10 to 16.57 mm2 and mean BCVA decreased from 0.34 to 1.06 logMAR at 5 years of follow-up. The mean overall GA area growth rate was 1.96 mm2/yr. During yearly follow-up from baseline to 5 years, there were significant differences in GA growth rate of zone 3 inferior (p < 0.005). The GA area changes of zone 3 inferior was significantly correlated with BCVA. In the subgroup with BCVA decreased under 1.0 logMAR during follow-up, there was a higher growth rate in zone 2 nasal sector, 2 to 3 years before. Conclusions The overall GA growth rate was 1.96 mm2/yr in the 5-year follow-up of our cohort. Changes in the GA growth rate in the nasal perifoveal region (zone 2) may be associated with subsequent clinically meaningful visual decline.

Background: Seborrheic dermatitis (SD) is a chronic inflammatory scalp disorder associated with Malassezia dysbiosis and increased sebum production. AMPamide has been suggested to have anti-inflammatory and sebum-regulating effects, but its clinical efficacy and microbiome-modulating effects in SD remain unclear. Objective: To evaluate the clinical efficacy and scalp microbiome changes following 4 weeks of use of an AMPamide-containing shampoo in patients with SD. Methods: In this observational study, 30 patients with SD applied an AMPamide-containing shampoo for 4 consecutive weeks. Clinical outcomes, including sebum levels and overall severity scores, were assessed. Scalp bacterial and fungal communities were analyzed to evaluate α- and β-diversity and changes in Malassezia composition. Results: Treatment resulted in significant reductions in sebum levels and clinical severity scores, particularly in erythema, dandruff, and pruritus. Bacterial community composition remained largely stable, while fungal α-diversity increased, and β-diversity analysis revealed a decrease in the ratio of Malassezia restricta to Malassezia globosa. Conclusion AMPamide-containing shampoo was associated with improved clinical symptoms and a shift toward a more balanced fungal community composition in patients with SD, supporting its potential as a non-steroidal therapeutic option for SD.

Purpose: Current guidelines recommend vaccination at least 2 weeks before chemotherapy initiation to optimize the immune response despite limited evidence. Our previous study indicated no differences in short-term immune response for the 13-valent pneumococcal conjugate vaccine (PCV13) according to the vaccination timing. This study aims to investigate the long-term efficacy of PCV13 and clinical factors associated with the respective antibody response. Materials and Methods: Patients with gastric or colorectal cancer who received adjuvant chemotherapy were enrolled and divided into two groups: vaccinated 2 weeks before chemotherapy (arm A) and vaccinated concurrently with chemotherapy (arm B). Serum samples were collected before vaccination and in one month, 3 years, and 5 years. Immune responses were measured using enzyme-linked immunosorbent assay and multiplex opsonophagocytosis assay. Results: Including 63 patients, both groups showed an initial increase in the geometric mean titers of opsonophagocytic activity and the geometric mean concentrations of serotype-specific IgG levels after one month, followed by a decline at 3 and 5 years, particularly for serotypes 1, 14, 18C, and 19A. Despite the decline, global protection was maintained for 5 years, although global response decreased. The two arms did not show significant differences in immunogenicity nor in factors such as vaccination timing, age, cancer type, or chemotherapy regimen. Conclusion Vaccination timing is not a significant factor for the immunogenicity of PCV13 in cancer patients undergoing adjuvant chemotherapy. Global protection against pneumococcal infection was sustained for > 5 years, and global response remained in over half of patients.

The loss of occlusal vertical dimension due to multiple tooth loss and wear can lead to a collapsed occlusion, resulting in both functional and aesthetic problems.This case report describes a patient exhibiting mandibular prognathism as a result of vertical dimension loss. A comprehensive oral rehabilitation involving an increase in vertical dimension was required. A minimal number of implants were placed, and implant-supported surveyed crowns were fabricated, allowing for the design of a stable and retentive implant-assisted removable partial denture. The treatment resulted in both functional and aesthetic improvements. The anterior rotational pattern of the mandible was alleviated, and the implant-assisted partial denture provided clinically high levels of patient satisfaction. This case report details the diagnostic and therapeutic processes involved in this treatment.

Crossbite refers to a condition where there are remaining teeth, but none of the teeth are in occlusal contact, resulting in the loss of vertical support. When posterior vertical stop is lost, it is important to appropriately restore this support and create a harmonious occlusal plane. In this case, the patient had lost posterior support but declined surgical intervention due to a history of osteoporosis and the associated risk of medication-related osteonecrosis of the jaw (MRONJ). To restore the vertical space required for prosthetic rehabilitation, the vertical dimension was increased. The missing posterior teeth were replaced using removable partial dentures. Cross-mounting was performed, and the metal copings of the surveyed crowns and the framework of the final removable partial denture were 3D printed. After the treatment was completed, the patient expressed satisfaction with both functions and aesthetics. Regular follow-ups were conducted to monitor oral hygiene and occlusal stability.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

The loss of occlusal vertical dimension due to multiple tooth loss and wear can lead to a collapsed occlusion, resulting in both functional and aesthetic problems.This case report describes a patient exhibiting mandibular prognathism as a result of vertical dimension loss. A comprehensive oral rehabilitation involving an increase in vertical dimension was required. A minimal number of implants were placed, and implant-supported surveyed crowns were fabricated, allowing for the design of a stable and retentive implant-assisted removable partial denture. The treatment resulted in both functional and aesthetic improvements. The anterior rotational pattern of the mandible was alleviated, and the implant-assisted partial denture provided clinically high levels of patient satisfaction. This case report details the diagnostic and therapeutic processes involved in this treatment.

Crossbite refers to a condition where there are remaining teeth, but none of the teeth are in occlusal contact, resulting in the loss of vertical support. When posterior vertical stop is lost, it is important to appropriately restore this support and create a harmonious occlusal plane. In this case, the patient had lost posterior support but declined surgical intervention due to a history of osteoporosis and the associated risk of medication-related osteonecrosis of the jaw (MRONJ). To restore the vertical space required for prosthetic rehabilitation, the vertical dimension was increased. The missing posterior teeth were replaced using removable partial dentures. Cross-mounting was performed, and the metal copings of the surveyed crowns and the framework of the final removable partial denture were 3D printed. After the treatment was completed, the patient expressed satisfaction with both functions and aesthetics. Regular follow-ups were conducted to monitor oral hygiene and occlusal stability.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Purpose: The immunological response and adverse effects of antineutrophil cytoplasmic antibody-associated vasculitis (AAV) in patients receiving coronavirus disease-2019 (COVID-19) vaccines remain unclear. We aimed to evaluate the effects of these vaccines on AAV disease activity. Materials and Methods: We reviewed the medical records of 52 patients with AAV who had received at least second doses of the COVID-19 vaccine and evaluated their immunogenicity by measuring the anti-spike (S) antibody (Ab) titer levels using the Roche Elecsys® immunoassay. Responses to the Birmingham Vasculitis Activity Score (BVAS) tool and 36-Item Short Form Survey before and after vaccination were obtained to assess AAV disease activity. Vaccine reactivity was measured using a standardized questionnaire. Results: We enrolled 52 patients with AAV. No differences were found between those who received second and third doses of vaccination in terms of AAV type, disease activity, vaccine type, or the use of immunosuppressive agents, including steroids. The median anti-S Ab titer was 3967.0 after third doses compared to 419.0 after second doses (p=0.001). Except for mycophenolate mofetil (MMF), when immunosuppressants were administered in conjunction with steroids, the Ab titer was higher after the third vaccination than that after the second dose. The BVAS remained unchanged before and after second and third doses. No life-threatening adverse events were reported. Conclusion Although COVID-19 vaccine may not produce sufficient antibodies in patients taking MMF, the vaccine did not exacerbate disease activity or cause severe side effects. Therefore, COVID-19 vaccines should be considered in patients with AAV.