OBJECTIVE: To evaluate the efficacy and safety of Shexiang Tongxin Dropping Pill (STDP) in treating stable angina patients with phlegm-heat and blood-stasis syndrome by exercise duration and metabolic equivalents. METHODS: This multicenter, randomized, double-blind, placebo-controlled clinical trial enrolled stable angina patients with phlegm-heat and blood-stasis syndrome from 22 hospitals. They were randomized 1:1 to STDP (35 mg/pill, 6 pills per day) or placebo for 56 days. The primary outcome was the exercise duration and metabolic equivalents (METs) assessed by the standard Bruce exercise treadmill test after 56 days of treatment. The secondary outcomes included the total angina symptom score, Chinese medicine (CM) symptom scores, Seattle Angina Questionnaire (SAQ) scores, changes in ST-T on electrocardiogram and adverse events (AEs). RESULTS: This trial enrolled 309 patients, including 155 and 154 in the STDP and placebo groups, respectively. STDP significantly prolonged exercise duration with an increase of 51.0 s, compared to a decrease of 12.0 s with placebo (change rate: -11.1% vs. 3.2%, P<0.01). The increase in METs was significantly greater in the STDP group than in the placebo group (change: -0.4 vs. 0.0, change rate: -5.0% vs. 0.0%, P<0.01). The improvement of total angina symptom scores (25.0% vs. 0.0%), CM symptom scores (38.7% vs. 11.8%), reduction of nitroglycerin consumption (100.0% vs. 11.3%), and all domains of SAQ, were significantly greater with STDP than placebo (all P<0.01). The changes in Q-T intervals at 28 and 56 days from baseline were similar between the two groups (both P>0.05). Twenty-five participants (16.3%) with STDP and 16 (10.5%) with placebo experienced AEs (P=0.131), with no serious AEs observed. CONCLUSION STDP could improve exercise tolerance in patients with stable angina and phlegm-heat and blood stasis syndrome, with a favorable safety profile. (Registration No. ChiCTR-IPR-15006020).
Humans ; Double-Blind Method ; Drugs, Chinese Herbal/adverse effects* ; Male ; Female ; Middle Aged ; Angina, Stable/physiopathology* ; Aged ; Syndrome ; Treatment Outcome ; Placebos ; Tablets

Objective To explore the effectiveness and safety of percutaneous coronary artery shock wave balloon angioplasty(IVL)under the guidance of intravascular ultrasound(IVUS)for the treatment of severe calcification lesions in the left main artery(LM).Methods A total of 26 patients with severe LM(mouth,body,bifurcation)calcification admitted to Jiangnan University Affiliated Hospital from October 2022 to April 2024 were included,with an average age of 72.0(61.8,75.4)years.Under the guidance of IVUS,IVL was used for pre-treatment of calcified lesions,followed by percutaneous coronary intervention(PCI)with stent/drug balloon implantation.All patients were evaluated using IVUS before and after the use of IVL and after PCI.And compare the IVUS intracavity related data before and after treatment[plaque burden(PB)、minimum lumen area(MLA)、minimum lumen diameter(MLD)]and calcification fracture number,minimum stent area(MSA),stent expansion coefficient(expansion,EXP),etc.Results There were 26 patients(2 with opening lesions,7 with body lesions,and 17 with bifurcation lesions at the end of the main trunk),including 7 with stable angina pectoris(SAP),10 with unstable angina(UA),4 with acute ST-segment elevation myocardial infarction(STEMI),and 5 with non ST-segment elevation myocardial infarction(NSTEMI).The PB at the most severe site of calcification decreased by 79.50(76.00,83.75)％compared to 80.00(76.00,83.75)％after IVL(P=0.001),MLA increased by 3.39(3.14,3.68)mm2 compared to 3.38(3.14,3.67)mm2 after IVL(P=0.039),MLD increased by 3.21(3.07,3.30)mm compared to 3.20(3.07,3.30)mm after IVL(P=0.024),and there was 100％calcification rupture(1/2 cases,2/9 cases,≥3/15 cases).The stent/drug ball was successfully implanted 100％,with EXP of(89.15±4.42)％and an MSA of 7.20(6.46,7.45)mm2.No adverse events such as death,angina or recurrent myocardial infarction occurred during the 3 months follow-up after surgery.Conclusions After evaluation by IVUS and pre-treatment with IVL,PCI was successfully completed for severe calcification lesions in LM,and IVL can be used as an option for the treatment of severe calcification in LM.

Objective:To investigate the expression of kinase-like gene CT10 regulatory fac-tor(CRKL)in intrahepatic cholangiocarcinoma(ICC)and its effect on the proliferation and invasion of intrahepatic cholangiocarcinoma cells.Methods:qRT-PCR detected CRKL transcription in ICC pa-tient tissues and adjacent tissues.Immunohistochemistry assessed CRKL expression in ICC tissues and adjacent tissues,and analyzed its relationship with clinicopathological features.For the inhibition of CRKL expression in QBC939 cells by siRNA technology,the effect of CRKL silencing on AKT and ERK signaling pathway was measured by Western blot.CRKL's influence on QBC939 cell prolifera-tion and invasion was analyzed by MTT,clonogenesis,and Transwell assays.Results:The expres-sion of CRKL in ICC tissues was up-regulated,and there were statistically significant differences in CRKL expression in ICC with different clinicopathological features such as tumor size,lymph node metastasis and TNM stage.Cellular experiments showed a significant decrease in the phosphoryla-tion of AKT and ERK upon inhibition of CRKL,and the proliferation and invasion ability of ICC cells was significantly diminished(P＜0.05).Conclusion:CRKL promotes ICC cell proliferation and invasion through AKT and ERK pathways,offering new molecular targets and directions for targeted therapy.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective:To investigate the application value of single-sperm sequencing in resolving the carrier status of preim-plantation genetic testing(PGT)for chromosomal structural rearrangements in Robertsonian translocations.Methods:Haplotypes were constructed by single-sperm isolation combined with single-sperm sequencing for a patient with 45,XY,der(13;14)(q10;q10).Twenty single-sperm samples were isolated by mechanical braking and subjected to whole-genome amplification(WGA),and then the Asian Screening Array(ASA)gene chip was used to detect the 183 708 single nucleotide polymorphisms(SNP)of the WGA products.The single sperm associated with the translocation that could be used as haplotype inference was detected by copy number variation(CNV)sequencing,and the chromosomal haplotypes with normal and Robertsonian translocations were inferred.Three biopsy samples of embryonic trophoblast cells were used as the objects.After whole-genome amplification,high-throughput sequencing was employed to determine the status of the translocation chromosome carried by the embryos.The available blastocysts were selected for transfer,and the amniotic fluid samples were taken at 18 weeks of gestation to confirm whether the fetus carried the pathogenic muta-tion.Results:A total of 6 037 SNP sites were screened by single-sperm sequencing,and 30 sites selected to distinguish normal and translocation haplotypes.Preimplantation haplotype analysis showed that all the three embryos were euploids without Robertsonian translocation chromosome.Genetic testing of amniotic fluid in the second trimester confirmed that the karyotype of the fetus was 46,XN,carrying no Robertsonian translocation chromosome.Conclusion:For male carriers of Robertsonian translocation,single sperm sequencing can be used to screen SNP sites to construct haplotypes for distinguishing normal and Robertsonian translocation em-bryos,and to provide a basis for embryo selection by preimplantation chromosomal structural genetic testing.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: To evaluate the secondary attack rates of the SARS-CoV-2 Omicron variant and the associated factors. Methods: A total of 328 primary cases and 40 146 close contacts of the SARS-CoV-2 Omicron variant routinely detected in local areas of Jiangsu Province from February to April 2022 were selected in this study, and those with positive nucleic acid test results during 7 days of centralized isolation medical observation were defined as secondary cases. The demographic information and clinical characteristics were collected, and the secondary attack rate (SAR) and the associated factors were analyzed by using a multivariate logistic regression model. Results: A total of 1 285 secondary cases of close contacts were reported from 328 primary cases, with a SAR of 3.2% (95%CI: 3.0%-3.4%). Among the 328 primary cases, males accounted for 61.9% (203 cases), with the median age (Q₁, Q₃) of 38.5 (27, 51) years old. Among the 1 285 secondary cases, males accounted for 59.1% (759 cases), with the median age (Q₁, Q₃) of 34 (17, 52) years old. The multivariate logistic regression model showed that the higher SAR was observed in the primary male cases (OR=1.632, 95%CI: 1.418-1.877), younger than 20 years old (OR=1.766, 95%CI: 1.506-2.072),≥60 years old (OR=1.869, 95%CI: 1.476-2.365), infected with the BA.2 strain branch (OR=2.906, 95%CI: 2.388-3.537), the confirmed common cases (OR=2.572, 95%CI: 2.036-3.249), and confirmed mild cases (OR=1.717, 95%CI: 1.486-1.985). Meanwhile, the higher SAR was observed in the close contacts younger than 20 years old (OR=2.604, 95%CI: 2.250-3.015),≥60 years old (OR=1.287, 95%CI: 1.052-1.573) and exposure for co-residence (OR=27.854, 95%CI: 23.470-33.057). Conclusion: The sex and age of the primary case of the Omicron variant, the branch of the infected strain, case severity of the primary case, as well as the age and contact mode of close contacts are the associated factors of SAR.
Humans ; Male ; Middle Aged ; Young Adult ; Adult ; COVID-19/epidemiology* ; Incidence ; SARS-CoV-2 ; Logistic Models