Objective To evaluate the safety of the 13-valent pneumococcal polysaccharide conjugate vaccine (tetanus toxoid/diphtheria toxoid) (PCV13-TT/DT) among age-eligible children in Tianjin through a combination of active and passive surveillance methods. Methods From July 15, 2023, to August 31, 2024, active surveillance for adverse events following immunization (AEFI) was conducted among recipients of PCV13-TT/DT at 18 selected vaccination clinics in Tianjin. Recipients were monitored through on-site observation or telephone follow-up within 30 minutes after vaccination and on days 1, 3, 7, and 28. Passive surveillance for AEFI was conducted among recipients of PCV13-TT/DT at other vaccination clinics across the city. The incidence of AEFI was analyzed using descriptive epidemiological methods. Results A total of 24 916 recipients of PCV13-TT/DT were observed, with 440 AEFI cases reported, resulting in an overall incidence rate of 176.59 per 10 000. The incidence rate of AEFI in active surveillance was 813.79 per 10 000, significantly higher than that in passive surveillance (20.49 per 10 000; P< 0.001). The incidence rates of general reactions, abnormal reactions, and coincidental cases in active surveillance were 744.44 per 10 000, 8.16 per 10 000, and 61.19 per 10 000, respectively, all of which were higher than those in passive surveillance (18.49 per 10 000, 0.50 per 10 000, and 1.50 per 10 000), with P values < 0.05. General reactions were mainly characterized by fever, local redness, and local induration. Abnormal reactions included angioedema and allergic rash. Coincidental cases were mainly infections. No severe adverse reactions occurred. Conclusion The large-scale vaccination of PCV13-TT/DT after its launch has good safety, and continuous strengthening of vaccine safety monitoring is needed.

Objective To explore the effects of sacral neuromodulation (SNM) on urodynamic parameters during the storage phase in patients with neurogenic bladder (NB), so as to provide reference for evaluating the efficacy of SNM. Methods A total 49 NB patients undergoing SNM at our hospital during Oct.2012 and May 2025 were enrolled. Baseline data and video-urodynamic parameters were collected. Changes in maximum cystometric capacity, maximum detrusor pressure during storage phase, and bladder compliance before and after treatment were assessed. Improvements in detrusor overactivity (DO) and vesicoureteral reflux (VUR) were also analyzed. Results Among the 49 patients,27 were male and 22 were female, with a mean age of (37.41±15.15) years, a median disease duration of 5.0 (2.0,15.5) years, and a median follow-up of 11 (1,32) months. Up to 37 patients (75.5%) received permanent sacral nerve pulse generator implantation (permanent implant group), while the remaining 12 were classified as the non-permanent implant group. Before and after the test period, all patients showed a significant increase in maximum cystometric capacity [ (218.0 (93.0,358.5) mL vs.300.0 (238.5, 400.0) mL, P<0.001], a decrease in maximum detrusor pressure during the filling phase [32.0 (13.5,71.0) cmH_2 O vs. 20.0 (9.0,50.0) cmH_2 O, P<0.001], and an improvement in bladder compliance [11.8 (8.3,25.6) mL/cmH_2 O vs.26.7 (8.6,44.1) mL/cmH_2O, P<0.001]. In the permanent implant group, comparisons before and after the test period showed an increase in maximum bladder capacity [ (239.16±147.23) mL vs. (312.24±121.83) mL, P<0.001], a decrease in maximum detrusor pressure during filling[32.0 (15.0,58.0) cmH_2 O vs.15.0 (9.0,41.0) cmH_2 O, P<0.05], and improved bladder compliance [10.8 (8.3,23.6) mL/cmH_2 O vs.28.6 (8.6,41.4) mL/cmH_2 O, P<0.001]. No statistically significant differences in these parameters before and after the test period were observed in the non-permanent implant group (P>0.05). A total of 17 patients in the permanent implant group underwent follow-up video urodynamics. Compared to pre-test values, significant improvements were observed in maximum detrusor pressure during filling, and bladder compliance both at the end of the test period and at the last follow-up (P<0.05). However, no statistically significant differences were found in maximum cystometric capacity, maximum detrusor pressure during filling, and bladder compliance between the end of the test period and the last follow-up (P>0.05). Among the 49 patients,21 had DO and 20 had VUR. Both DO and VUR showed improvement after the test period and at the last follow-up. Conclusion SNM can effectively improve storage function in NB patients, ameliorate detrusor overactivity and bladder compliance, and relieve or eliminate VUR in some patients. Long-term follow-up confirms that SNM provides stable therapeutic effects, demonstrating significant clinical value.

Objective To establish and evaluate a gas chromatography-tandem mass spectrometry(GC-MS/MS)method for the detection of six common drugs(methamphetamine,meperidine,caffeine,codeine,cocaine and ketamine)in blood,and to improve the determination basis of results.Methods The above six drugs were added into the blank blood,and GC-MS/MS was used for detection after ether extraction.The collection,quantification and confirmation were carried out under the mode of multi-reaction monitoring(MRM).The qualitative results of the above six drugs were evaluated based on the maximum allowable deviation of the retention time and relative ion abundance ratio in the qualitative results of GC-MS/MS.Results There was a good linear relationship between the six common drugs,among which ketamine and caffeine had the lowest detection limit(0.01 μg/mL),methamphetamine had the highest detection limit(0.5 μg/mL).The retention time(RT)and relative retention time(RRT)of the target substance were stable under the six supplemental levels,and the absolute deviation(ΔRTabsolute)of RT was within±0.025 min.The absolute deviation of RRT(ΔRRTabsolute)was within±0.004.The relative ion abundance ratio absolute deviation(ΔIabsolute)is±20%,and the relative ion abundance ratio relative deviation(ΔIrelative)is±50%.Conclusion This study clarified the reference range for qualitative determination of six common drugs in blood matrix detected by GC-MS/MS,and effectively supplemented the qualitative determination indicators of existing instrumental analysis methods.

Objective To investigate the effects of Shechuangzi San on Th1/Th2 immune function in eczema rats and analyze its mechanisms in treating eczema.Methods Fifty SD rats were randomly divided into blank group,model group,Shechuangzi San high dose group,Shechuangzi San low dose group,and Bingbaiye liquid group,with 10 rats in each group.The rat eczema model was established using 2,4-dinitrochlorobenzene.The blank group and model group were topically treated with 0.9%saline,the Shechuangzi San high dose group was topically treated with a decoction of Shechuangzi San at a concentration of 2.32 g·mL-1,and the low dose group was topically treated with a decoction of Shechuangzi San at a concentration of 1.16 g·mL-1.And the Bingbaiye liquid group was topically treated with the original liquid of Bingbaiye,once in the morning and once in the evening,for a total of 14 days.After the last administration,the skin lesions on the rats'backs were observed and the skin lesion scores were evaluated.The pathological changes of eczema lesions were observed by HE staining,and semi-quantitatively scored.ELISA method was used to detect the levels of IFN-γ,IL-4,IL-18,and IL-33 in rat serum.Flow cytometry was used to determine the Th1/Th2 ratio in the serum.Results Compared to the blank group,the rat skin lesion score in the model group was significantly increased(P<0.05),with a series of skin lesions including edema,erythema,scaling,lichenification appearing on the back.Pathological sections showed excessive keratosis,thickening of cuticular layer,edema of epidermis sponge,infiltration of a large number of inflammatory cells in epidermis,and the semi-quantitative score of skin lesions was significantly increased(P<0.05).Serum levels of IL-4,IL-18,and IL-33 were significantly increased(P<0.05),while the level of IFN-γ was significantly decreased(P<0.05).Serum Th1/Th2 ratio decreased(P<0.05).Compared to the model group,the rat skin lesions in the Shechuangzi San high and low dose groups and the Bingbaiye liquid group were significantly improved(P<0.05),Pathological sections showed that the structure of epidermis was restored to normal,the cuticle became thinner,the spongy edema of epidermis disappeared,epidermal inflammatory cells disappeared,and the semi-quantitative score of skin lesions decreased(P<0.05).Serum levels of IL-4,IL-18,and IL-33 were decreased(P<0.05),while the level of IFN-γ was increased(P<0.05),serum Th1/Th2 ratio increased significantly(P<0.05).and the therapeutic effect of the Shechuangzi San high and low dose groups was superior to that of the Bingbaiye liquid group(P<0.05).Conclusion Shechuangzi San can effectively improve the skin lesions of rats with eczema,repair the pathological damage of skin lesions,and reduce the levels of inflammatory factors.Its mechanism may be related to the inhibition of secretion of inflammatory factors such as IL-4,IL-18,and IL-33,promotion of IFN-γ release,and restoration of Th1/Th2 imbalance.

In the past decades, significant progress has been achived in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method), phase separation method, gas foaming method, freeze-drying method, electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional(3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co-deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviewed 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage). In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

In the past decades, significant progress has been achived in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method), phase separation method, gas foaming method, freeze-drying method, electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional(3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co-deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviewed 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage). In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

Objective:To investigate the effect of different negative pressure level on drain volume after augmentation mammoplasty through inframammary fold incision, and try to put forward the appropriate negative pressure level for the best prognosis of patients.Methods:This was a randomized controlled clinical study. Patients who underwent prosthetic augmentation mammoplasty through inframammary fold incision in the Medical Beauty Center of the First Affiliated Hospital of Zhengzhou University from January 2019 to August 2021 were selected as the study subjects. Patients were divided into 4 groups by random number table method and different levels of negative pressure drainage were applied: 600 ml adjustable negative pressure drain bottle was used uniformly after operation by -80--85 kPa group, -40--60 kPa group, and -15--30 kPa group. In 0--5.2 kPa group, 300 ml drain drum was applied after operation. The criteria for drain removal was that the drain volume within 24 hours was less than 10 ml and the drainage fluid was clear. Daily drain volume, duration of drain placement, total drain volume, acceptance of the drain device and postoperative complications were recorded in the four groups. The corresponding indexes of each group were statistically analyzed by SPSS 21.0. Measurement data were expressed as Mean±SD. One-way analysis of variance was used for comparison between groups, and LSD- t test was used for pair comparison between groups. P<0.05 was considered statistically significant. Results:A total of 80 patients were included, 20 in each group. Inter-group equilibrium analysis: there was no significant difference in age, body mass index, distance from midclavicular point to nipple, distance from inferior mammary fold to nipple, and breast tissue thickness among 4 groups ( P>0.05). Evaluation of curative effect between groups: on the first and second day after operation, there was no significant difference in drain volume between -80--85 kPa group and -40--60 kPa group ( P>0.05), but there was significant difference among other groups ( P<0.05). There was significant difference in drain volume on the third day after operation, total drain volume and duration of drain placement between the four groups ( P<0.05). The lower the negative pressure level was, the less drain volume on the third day after surgery and the less total drain volume, and the shorter duration of drain placement. The duration of drain placement of the four groups were (5.6±0.7) d (-80--85 kPa group), (4.8±0.5) d (-40--60 kPa group), (4.0±0.5) d (-15--30 kPa group), and (3.2±0.4) d (0--5.2 kPa group), respectively. Safety evaluation: the complication rate of -80--85 kPa group, -40--60 kPa group, -15--30 kPa group and 0--5.2 kPa group were 2.5% (1/40), 2.5% (1/40), 0(0/40) and 15.0% (6/40), respectively. The complication rate of 0--5.2 kPa group was the highest. Investigation on the acceptance of the drainage device (no impact/dissatisfaction): 75 patients expressed dissatisfaction, with a dissatisfaction rate of 93.75%(75/80). Conclusion:In augmentation mammoplasty through inferior fold incision low negative pressure provides less drain volume, shorter drain placement. Negative pressure between -15 to -30 kPa is optimal.

In the past decades, great progress has been made in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method ) , phase separation method, gas foaming method, freeze-drying method , electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional (3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviews 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage) . In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4 D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

Objective:To investigate the effect of different negative pressure level on drain volume after augmentation mammoplasty through inframammary fold incision, and try to put forward the appropriate negative pressure level for the best prognosis of patients.Methods:This was a randomized controlled clinical study. Patients who underwent prosthetic augmentation mammoplasty through inframammary fold incision in the Medical Beauty Center of the First Affiliated Hospital of Zhengzhou University from January 2019 to August 2021 were selected as the study subjects. Patients were divided into 4 groups by random number table method and different levels of negative pressure drainage were applied: 600 ml adjustable negative pressure drain bottle was used uniformly after operation by -80--85 kPa group, -40--60 kPa group, and -15--30 kPa group. In 0--5.2 kPa group, 300 ml drain drum was applied after operation. The criteria for drain removal was that the drain volume within 24 hours was less than 10 ml and the drainage fluid was clear. Daily drain volume, duration of drain placement, total drain volume, acceptance of the drain device and postoperative complications were recorded in the four groups. The corresponding indexes of each group were statistically analyzed by SPSS 21.0. Measurement data were expressed as Mean±SD. One-way analysis of variance was used for comparison between groups, and LSD- t test was used for pair comparison between groups. P<0.05 was considered statistically significant. Results:A total of 80 patients were included, 20 in each group. Inter-group equilibrium analysis: there was no significant difference in age, body mass index, distance from midclavicular point to nipple, distance from inferior mammary fold to nipple, and breast tissue thickness among 4 groups ( P>0.05). Evaluation of curative effect between groups: on the first and second day after operation, there was no significant difference in drain volume between -80--85 kPa group and -40--60 kPa group ( P>0.05), but there was significant difference among other groups ( P<0.05). There was significant difference in drain volume on the third day after operation, total drain volume and duration of drain placement between the four groups ( P<0.05). The lower the negative pressure level was, the less drain volume on the third day after surgery and the less total drain volume, and the shorter duration of drain placement. The duration of drain placement of the four groups were (5.6±0.7) d (-80--85 kPa group), (4.8±0.5) d (-40--60 kPa group), (4.0±0.5) d (-15--30 kPa group), and (3.2±0.4) d (0--5.2 kPa group), respectively. Safety evaluation: the complication rate of -80--85 kPa group, -40--60 kPa group, -15--30 kPa group and 0--5.2 kPa group were 2.5% (1/40), 2.5% (1/40), 0(0/40) and 15.0% (6/40), respectively. The complication rate of 0--5.2 kPa group was the highest. Investigation on the acceptance of the drainage device (no impact/dissatisfaction): 75 patients expressed dissatisfaction, with a dissatisfaction rate of 93.75%(75/80). Conclusion:In augmentation mammoplasty through inferior fold incision low negative pressure provides less drain volume, shorter drain placement. Negative pressure between -15 to -30 kPa is optimal.

In the past decades, great progress has been made in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method ) , phase separation method, gas foaming method, freeze-drying method , electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional (3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviews 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage) . In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4 D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.