Glucose oxidase (GOD) is an oxygen-consuming dehydrogenase that can catalyze the production of gluconic acid hydrogen peroxide from glucose, and its specific mechanism of action makes it promising for applications, while the low catalytic activity and poor thermostability have become the main factors limiting the industrial application of this enzyme. In this study, we used the glucose oxidase AtGOD reported with the best thermostability as the source sequence for phylogenetic analysis to obtain the GOD with excellent performance. Six genes were screened and successfully synthesized for functional validation. Among them, the glucose oxidase AhGODB derived from Aspergillus heteromorphus was expressed in Pichia pastoris and showed better thermostability and catalytic activity, with an optimal temperature of 40 ℃, a specific activity of 112.2 U/mg, and a relative activity of 47% after 5 min of treatment at 70 ℃. To improve its activity and thermal stability, we constructed several mutants by directed evolution combined with rational design. Compared with the original enzyme, the mutant T72R/A153P showcased the optimum temperature increasing from 40 to 50 ℃, the specific activity increasing from 112.2 U/mg to 166.1 U/mg, and the relative activity after treatment at 70 ℃ for 30 min increasing from 0% to 33%. In conclusion, the glucose oxidase mutants obtained in this study have improved catalytic activity and thermostability, and have potential for application.
Glucose Oxidase/chemistry* ; Enzyme Stability ; Aspergillus/genetics* ; Pichia/metabolism* ; Temperature ; Catalysis ; Fungal Proteins/metabolism* ; Hot Temperature

Objective To investigate the relationship between high DNA stainability(HDS)and routine semen parameters.Methods Semen samples were collected from 396 men of childbearing age who were admitted to our department.Correlations of HDS with routine semen parameters and age were analyzed.Multiple linear regression analysis was performed to identify the routine semen parameters that had the greatest influence on HDS.The correlation of HDS and DNA fragmentation index(DFI)with routine semen parameters and age in 244 patients with teratozoospermia was analyzed.The 244 patients were divided into extremely severe,severe,moderate,and mild teratozoospermia groups,and differences in HDS,DFI,and routine semen parameters were compared among the four groups.Results HDS was negatively correlated with total sperm count,sperm concentration,sperm progressive motility,and normal sperm morphology rate(NSMR)(P<0.01).After adjusting for potential confounders,including total sperm count,sperm concentration,sperm progressive motility,NSMR,and DFI,NSMR had the most significant negative effect on HDS(P<0.05).In the 244 patients with teratozoospermia,HDS was negatively correlated with NSMR(P<0.01)and positively correlated with the percentage of sperm head and tail abnormalities(P<0.05),while DFI was positively correlated with the percentage of sperm tail abnormalities(P<0.01).There was a significant difference in the percentage of sperm head abnormalities among the four teratozoospermia groups.The more severe the malfor-mation,the higher the percentage of sperm head abnormalities was(P<0.001).HDS in the extremely severe teratozoospermia group was significantly higher than that in the mild and moderate teratozoospermia groups(P<0.05).No significant differences in DFI were found among the four groups(P>0.05).Conclusion HDS was closely correlated with routine semen parameters and was a crucial biomarker for assessing sperm quality,particularly the extent of sperm head abnormalities.

Objective:To investigate the efficacy of radiotherapy in patients with advanced esophageal cancer receiving first-line chemoimmunotherapy.Methods:A retrospective analysis was conducted on the data of 137 patients with Stage Ⅳ esophageal squamous cell carcinoma (ESCC) treated at our hospital from January 2018 to May 2023. These patients were divided into two groups: a group treated with first-line chemoimmunotherapy combined with radiotherapy (chemoimmunotherapy + radiotherapy group, n = 43) and a group treated with only chemoimmunotherapy ( n = 94). Inverse probability of treatment weighting (IPTW) was applied to balance baseline characteristics between the groups. With overall survival (OS) and progression-free survival (PFS) as study endpoints, the survival data were analyzed using the Kaplan-Meier method, the log-rank test, and the Cox regression method. Results:Before calibration, the chemoimmunotherapy + radiotherapy group significantly outperformed the sole chemoimmunotherapy group in median PFS (13.6 months vs. 7.0 months; HR: 0.501, 95% CI: 0.309-0.811, P = 0.005). After calibration using the COX proportional-hazards model for age, gender, Eastern Cooperative Oncology Group (ECOG) performance status, smoking history, T/N/M stage, and tumor location, the chemoimmunotherapy + radiotherapy group still had significant advantages in PFS (14.7 months vs. 7.0 months; HR: 0.441, 95% CI: 0.261-0.745, P = 0.002). IPTW analysis further confirmed this trend (13.9 months vs. 7.0 months; HR: 0.492, 95% CI: 0.304-0.795, P < 0.001). Specifically, the median OS of the chemoimmunotherapy + radiotherapy group demonstrated significant improvement in all analyses: pre-calibration (29.5 months vs. 18.0 months; HR: 0.507, 95% CI: 0.297-0.867, P = 0.013), after calibration using the Cox model (27.5 months vs. 16.7 months; HR: 0.470, 95% CI: 0.266-0.830, P = 0.009), and after calibration using IPTW (29.5 months vs. 16.9 months; HR: 0.448, 95% CI: 0.262-0.764, P < 0.001). Conclusions:The combination of radiotherapy and first-line chemoimmunotherapy can significantly improve survival outcomes of patients with advanced ESCC, suggesting its potential as a standard treatment strategy.

With the rapid development of competitive sports, the incidence of anterior cruciate ligament (ACL) injury is on the rise. Such injuries may shorten athletes′ career and lead to other long-term adverse consequences. Although athletes generally recover well after ACL reconstruction, many still struggle to return to their pre-injury performance levels. Advances in the understanding of ACL anatomy and injury mechanisms, along with the evolution of surgical techniques and rehabilitation methods, have provided more individualized and tailored options for athletes following ACL injuries. However, there is currently no consensus in China regarding surgical and rehabilitation strategies for competitive athletes aiming to return to sports after ACL injuries. To this end, the Sports Medicine Committee of the Chinese Research Hospital Association and the Editorial Board of the Chinese Journal of Trauma jointly formulated the Expert consensus on surgical treatment and rehabilitation for competitive sports athletes returning to sports after anterior cruciate ligament injury ( version 2025), and presented 14 recommendations covering surgical indications, preoperative rehabilitation, surgical timing, surgical strategies and postoperative rehabilitation strategies, aiming to improve the surgical treatment and rehabilitation system for ACL injuries in competitive athletes and facilitate their return to high-level sports performance after injury.

Spine fracture and dislocation are common traumatic spinal conditions that often require surgical intervention due to compromised spinal stability. Surgical approaches include anterior, posterior, and combined anterior-posterior spinal procedures. According to the specific surgical requirements, patients may be placed in the prone position or repositioned between prone and supine positions during surgery. Intraoperative repositioning has become an essential step in patient positioning. However, during repositioning, patients with spinal fracture and dislocation are at increased risk for complications such as hemodynamic instability, nerve injury, and pressure injuries to the skin and soft tissue. Notably, due to the instability of the spinal cord, even minor manipulations can further exacerbate the damage, potentially leading to severe outcomes like paraplegia. Although the current clinical guidelines provide instructive recommendations for standard position, there remains no specific protocols for intraoperative repositioning in patients with spine fracture and dislocation. With a concern for the lack of clinical studies on positioning techniques, risk prevention, and operational norms for special patients, no applicable guidelines or standards are available. A consensus was required to provide clinical reference, meet the requirements of surgical treatment, and minimize the safety risks of patients caused by improper placement of positions. Professional Committee of Operating Room Nursing of Shaanxi Nursing Association organized experts in nursing management and operating room nursing from major hospitals across China to formulate Expert consensus on intraoperative repositioning for patients with spinal fracture and dislocation ( version 2025). The consensus provides 11 recommendations covering pre-repositioning preparation, intraoperative maneuvers, and post-repositioning observation, aiming to provide references for clinical standardization of the intraoperative repositioning process and protection of patients′ safety.

Objective:To investigate the clinical effect of microplasma radiofrequency combined with oral traditional Chinese medicine (TCM) Babao Dan capsule to improve damp-heat TCM constitution in the treatment of hypertrophic scar.Methods:A prospective randomized controlled trial method was used to recruit patients diagnosed with damp-heat TCM constitution and suffering from hypertrophic scar who admitted to the Fourth Medical Center of Chinese PLA General Hospital from March to July 2024. All patients were randomly divided into microplasma radiofrequency combined with TCM treatment group (combination group), microplasma radiofrequency (RF) treatment group (RF group), and oral TCM treatment group (TCM group). Both the combination group and the RF group were treated with a microplasma radiofrequency instrument. Transverse, longitudinal and oblique scar grinding were performed three times with 90 W power, and regular scabs appeared in the treatment area as the treatment end point. After RF treatment in the combination group and the TCM group, Babao Dan capsule was taken with regular warm water, 0.6 g each time, 3 times/day, for 3 months. The Vancouver scar scale (VSS) score (higher score indicating more severe scar), visual analogue scale (VAS) of scar pain and itch (higher score indicating more severe symptom), and TCM constitution score (higher score indicating more severe moist heat constitution) were compared before treatment and 3 months after the first treatment. SPSS 26.0 software was used for statistical analysis. Measurement data conforming to normal distribution were expressed as Mean±SD, ANOVA was used for comparison among groups, and LSD- t method was used for pair comparison between groups. Paired sample t test was used before and after treatment in the same group. Counting data were expressed as cases (%), and the χ2 test was used for inter-group comparison. P<0.05 was considered statistically significant. Results:A total of 60 patients were included, 20 in each group. There were no significant differences in gender distribution, disease course, scar area and distribution among the three groups ( P>0.05), indicating comparability. Before treatment, there were no statistically significant differences in VSS, VAS and TCM physique scores among the 3 groups ( P>0.05). After treatment, VAS scores in the 3 groups, VSS scores in combination group and RF group, TCM physique scores in combination group and TCM group were improved compared with those before treatment, and the differences were statistically significant ( P<0.05). The VSS score of the combination group was significantly lower than that of the RF group and the TCM group ( P<0.05), but there was no statistical significance between the RF group and the TCM group ( P>0.05). The pruritus VAS score of the combination group was significantly lower than that of TCM group and RF group ( P<0.05), but there was no statistical significance between RF group and TCM group ( P>0.05). There was no significant difference in pain VAS scores among the three groups after treatment ( P>0.05). The TCM physique scores of the combination group and TCM group were significantly lower than those of the RF group ( P<0.01), but there was no statistical significance between the combination group and TCM group ( P>0.05). Conclusion:Microplasma radiofrequency combined with oral Babao Dan capsule can effectively improve the VSS score, pain and pruritus of hypertrophic scars in patients with damp-heat constitution, and the effect is better than that of radiofrequency or TCM alone.

BACKGROUND:The highest incidence of spinal fracture is in the thoracolumbar segment,and its symptoms are back pain,posterior convexity deformity,activity limitation,or with spinal cord nerve injury causing lower limb pain,numbness,and even paraplegia and other complications.The finite element method is a digital computer modeling technique,which can simulate the physical model and carry out force analysis realistically.OBJECTIVE:To review the application of finite element method in thoracolumbar spine fractures.METHODS:We searched the Chinese and English literature databases PubMed,Web of Science,and CNKI for relevant literature on the application of the finite element analysis method in spinal thoracolumbar fracture published before March 2024.The search terms in Chinese and English were:finite element analysis methods,biomechanical phenomena,stress analysis,thoracolumbar fractures,spinal fractures.Finally,55 papers were included.RESULTS AND CONCLUSION:(1)The exploration of thoracolumbar fractures caused by different etiologies(osteoporotic,traumatic,and pathological)through the finite element method is conducive to a deeper understanding of the biomechanics of various types of thoracolumbar fractures,and to improve the individualized and fine-tuned treatment of thoracolumbar fractures.(2)The finite element analysis of a single sample or a small number of samples has the chance,and a larger number of samples are required for the future finite element analysis to reduce the chance caused by the sample.(3)The rigid structure of bones alone cannot meet the biomechanical working conditions of the integrity of the physical object,and future finite element models need to incorporate all the structures of the physical object(e.g.,soft tissues,such as muscles and ligaments)as far as possible.(4)The finite element method has been used in more studies on osteoporotic and traumatic thoracolumbar spine fractures,which will need to be more in-depth in the future,and less in the field of pathologic thoracolumbar fractures,which has a wider scope for future research.

Objective To investigate the influence of helical tomographic radiotherapy plans with different combinations of lead gate width,pitch and algorithms on threading effects.Methods A target model was established with a Cheese Phantom used as the simulated human body,then three lead gate widths(1.0,2.5,and 5.0 cm),six screw pitches(0.143,0.172,0.215,0.287,0.430,and 0.500)and two computational grids(Fine algorithm and Normal algorithm)were respectively combined for designing the helical tomography radiotherapy plans.The radiotherapy plans with a pitch of 0.143,0.172,0.215,0.287 or 0.430 were enrolled into an experimental group,and the plans with a pitch of 0.500 were divided into a control group.The dosimetric parameters including maximum dose(Dmax),minimum dose(Dmin)and mean dose(Dmean)of the target area PTV1 and PTV2 were evaluated by the dose volume histogram(DVH).The dose homogeneity index(HI)of the target area was calculated,and the single rotation time and total treatment time of each plan were recorded and counted.SPSS 27.0 software was used for statistical analysis.Results No significant threading effect appeared regardless of the pitch value when the lead gate width was 1.0 cm.The threading effects in the experimental group were weaker than those in the control group when the lead gate width was 2.5 or 5.0 cm.The threading effect gradually rose with the pitch increased when the lead gate width was 5.0 cm.The most significant difference was found between the threading effect in case of the screw pitch being 0.500 and that with the screw pitch being 0.143,with the differenes being statistically obvious(P<0.05).The lead gate width had significant effects on the Dmax,Dmin,Dmean and HI of PTV1 and PTV2.When the lead gate width was 5.0 cm,high HI value and uneven dose distribution were detected and lowered screw pitch weakened the threading effect.The single rotation time first remained constant and then increased with the screw pitch was enlarged,with the changing points occurring in case of the screw pitches of 0.287 and 0.430.With a certain lead gate width,the treatment time for plans was shortened with the decrease of the pitches in case of the pritches lower than 0.287,and tended to be constant after the screw pitches reached 0.287.The changes of the computational grid had no significant effects on the results of radiotherapy plans when the lead gate width and screw pitch were kept constant.Conclusion When designing a spiral tomotherapy plan with conventional doses,a lead gate width of 1.0 or 2.5 cm and a screw pitch of 0.287 or 0.430 should be selected in order to minimize the threading effect while ensuring the efficiency of plan implementation.[Chinese Medical Equipment Journal,2025,46(8):58-66]

Protrusive facial deformities, characterized by the forward displacement of the teeth and/or jaws beyond the normal range, affect a considerable portion of the population. The manifestations and morphological mechanisms of protrusive facial deformities are complex and diverse, requiring orthodontists to possess a high level of theoretical knowledge and practical experience in the relevant orthodontic field. To further optimize the correction of protrusive facial deformities, this consensus proposes that the morphological mechanisms and diagnosis of protrusive facial deformities should be analyzed and judged from multiple dimensions and factors to accurately formulate treatment plans. It emphasizes the use of orthodontic strategies, including jaw growth modification, tooth extraction or non-extraction for anterior teeth retraction, and maxillofacial vertical control. These strategies aim to reduce anterior teeth and lip protrusion, increase chin prominence, harmonize nasolabial and chin-lip relationships, and improve the facial profile of patients with protrusive facial deformities. For severe skeletal protrusive facial deformities, orthodontic-orthognathic combined treatment may be suggested. This consensus summarizes the theoretical knowledge and clinical experience of numerous renowned oral experts nationwide, offering reference strategies for the correction of protrusive facial deformities.
Humans ; Orthodontics, Corrective/methods* ; Consensus ; Malocclusion/therapy* ; Patient Care Planning ; Cephalometry

Digital technologies have become an integral part of complete denture restoration. With advancement in computer-aided design and computer-aided manufacturing (CAD/CAM), tools such as intraoral scanning, facial scanning, 3D printing, and numerical control machining are reshaping the workflow of complete denture restoration. Unlike conventional methods that rely heavily on clinical experience and manual techniques, digital technologies offer greater precision, predictability, and efficacy. They also streamline the process by reducing the number of patient visits and improving overall comfort. Despite these improvements, the clinical application of digital complete denture restoration still faces challenges that require further standardization. The major issues include appropriate case selection, establishing consistent digital workflows, and evaluating long-term outcomes. To address these challenges and provide clinical guidance for practitioners, this expert consensus outlines the principles, advantages, and limitations of digital complete denture technology. The aim of this review was to offer practical recommendations on indications, clinical procedures and precautions, evaluation metrics, and outcome assessment to support digital restoration of complete denture in clinical practice.
Humans ; Denture, Complete ; Computer-Aided Design ; Denture Design/methods* ; Consensus ; Printing, Three-Dimensional