OBJECTIVE: To investigate the effectiveness of digital three-dimensional (3D) printing osteotomy guide plate assisted total knee arthroplasty (TKA) in treatment of knee osteoarthritis (KOA) patients with femoral internal implants. METHODS: The clinical data of 55 KOA patients who met the selection criteria between July 2021 and October 2023 were retrospectively analyzed. Among them, 26 cases combined with femoral implants were treated with digital 3D printing osteotomy guide plate assisted TKA (guide plate group), and 29 cases were treated with conventional TKA (control group). There was no significant difference in gender, age, body mass index, side, Kellgren-Lawrence classification, preoperative visual analogue scale (VAS) score, Hospital for Special Surgery (HSS) knee score, knee range of motion, and other baseline data between the two groups ( P>0.05). The operation time, intraoperative blood loss, incision length, postoperative first ambulation time, surgical complications; VAS score, knee HSS score, knee range of motion before operation, at 1 week and 3 months after operation, and at last follow-up; distal femoral lateral angle, proximal tibial medial angle, hip-knee-ankle angle and other imaging indicators at last follow-up were recorded and compared between the two groups. RESULTS: The operation time, incision length, intraoperative blood loss, and postoperative first ambulation time in the guide plate group were significantly lower than those in the control group ( P<0.05). In the control group, there were 1 case of incision rupture and bleeding and 1 case of lower limb intermuscular venous thrombosis, which was cured after symptomatic treatment. There was no complication such as neurovascular injury, incision infection, or knee prosthesis loosening in both groups. Patients in both groups were followed up 12-26 months, with an average of 16.25 months. The VAS score, HSS score, and knee range of motion improved at each time point after operation in both groups, and further improved with time after operation, the differences were significant ( P<0.05). The above indicators in the guide plate group were significantly better than those in the control group at 1 week and 3 months after operation ( P<0.05), and there was no significant difference between the two groups at last follow-up ( P>0.05). At last follow-up, the distal femoral lateral angle, the proximal tibial medial angle, and the hip-knee-ankle angle in the guide plate group were significantly better than those in the control group ( P<0.05). CONCLUSION The application of digital 3D printing osteotomy guide plate assisted TKA in the treatment of KOA patients with femoral implants can simplify the surgical procedures, overcome limitations of conventional osteotomy guides, reduce surgical trauma, achieve individualized and precise osteotomy, and effectively restore lower limb alignment and knee joint function.
Humans ; Arthroplasty, Replacement, Knee/instrumentation* ; Osteoarthritis, Knee/surgery* ; Osteotomy/instrumentation* ; Male ; Retrospective Studies ; Female ; Printing, Three-Dimensional ; Femur/surgery* ; Middle Aged ; Bone Plates ; Range of Motion, Articular ; Aged ; Treatment Outcome ; Surgery, Computer-Assisted/methods* ; Knee Prosthesis ; Knee Joint/surgery* ; Operative Time

OBJECTIVE: Investigation on the clinical application of HURWA robot and Smith & Nephew Cori robot in total knee arthroplasty(TKA). METHODS: A retrospective analysis was performed on 84 patients with knee osteoarthritis who underwent robotic-assisted TKA (RATKA) between June 2023 and March 2025. According to the different robotic systems used, the patients were divided into the domestic HUARUN robotic-assisted total knee arthroplasty group (HRATKA group) and the Smith & Nephew Cori robotic-assisted total knee arthroplasty group (CRATKA group). There were 42 patients in the HRATKA group, including 16 males and 26 females; the age ranged from 56 to 73 years old, with an average of (64.70±8.30) years old;the body mass index (BMI) was (25.10±2.30) kg·m^-2;21 cases were on the right side and 21 cases on the left side;in terms of Kellgren-Lawrence(K-L) classification, there were 15 cases of Grade Ⅲ and 27 cases of Grade Ⅳ;the disease duration ranged from 3 to 25 years, with an average of (15.5±7.5) years. The CRATKA group also included 42 patients, with 14 males and 28 females;the age ranged from 58 to 74 years old, with an average of (65.60±7.50) years old;the BMI was (24.50±2.70) kg·m^-2; 20 cases were on the right side and 22 cases on the left side;regarding K-L classification, there were 11 cases of Grade Ⅲ and 31 cases of Grade Ⅳ;the disease duration ranged from 2 to 26 years, with an average of (16.5±8.8) years. Collect general data of all patients, including age, gender, height, weight, surgical site, K-L classification, incision length, and operation time. To evaluate prosthesis position, compare the frontal tibia component (FTC) angle, lateral femoral component (LFC) angle, lateral tibia component (LTC) angle, and frontal femoral component angle between the two groups of patients after surgery. Measure the deviation of the hip-knee-ankle (HKA) angle to assess lower limb alignment. Additionally, compare the following indicators between the two groups:Knee Society Score (KSS), Visual Analogue Scale (VAS) for pain, knee range of motion (ROM), hemoglobin (HB) level, hematocrit (HCT) level, complication rate, and in-hospital satisfaction. RESULTS: All patients successfully completed the surgery as scheduled, and all were followed up after the operation. The follow-up period ranged from 5 to 17 months with an average of (11.2±6.1) months. There were 4 cases of venous thrombosis in the HRATKA group and 3 cases in the CRATKA group;each group had 2 cases of wound exudation. No mechanical-related complications, pulmonary embolism, or other severe complications occurred. Comparison of the incision length and hospital stay between the HRATKA group and the CRATKA group showed no statistically significant difference (P>0.05). The operation time in the HRATKA group was (96.80±7.10) minutes, which was longer than that in the CRATKA group (90.10±8.80) minutes, and the difference was statistically significant (P<0.05). In the HRATKA group, the HKA angle was (178.93±1.11) degree, the FFC angle was (89.00±0.91)°, and the LFC angle was (7.31±2.17) degree;the corresponding values in the CRATKA group were (178.05±1.34)°, (87.88±1.74)°, and (10.60±2.84) degree respectively. The differences in these three indicators between the two groups were all statistically significant (P<0.05). However, there were no statistically significant differences in the FTC angle or LTC angle between the two groups (P>0.05). There was also no statistically significant difference in the total perioperative blood loss between the two groups (P>0.05). At 3 days after surgery, the VAS score for movement in the HRATKA group (5.95±1.45) points was higher than that in the CRATKA group (4.50±0.97) points, with a statistically significant difference (P<0.05);at 90 days after surgery, there was no statistically significant difference in the movement VAS score between the two groups (P>0.05). Additionally, no statistically significant differences were observed between the two groups in the KSS, ROM at 3 and 90 days after surgery, or satisfaction degree during hospitalization (all P>0.05). CONCLUSION The domestic HURWA robot demonstrates excellent performance in osteotomy efficiency and lower limb alignment recovery. The Smith & Nephew Cori robot has a significant advantage in soft tissue assessment and joint stability optimization. Both robotic systems offer high-quality surgical treatments that significantly improve short-term knee function.
Humans ; Male ; Female ; Arthroplasty, Replacement, Knee/instrumentation* ; Aged ; Middle Aged ; Retrospective Studies ; Robotic Surgical Procedures/methods* ; Osteoarthritis, Knee/surgery*

OBJECTIVE: To analyze the accuracy of prosthesis size selection in Naton robot-assisted medial unicondyle knee arthroplasty by comparing the actual prosthesis size used during operation and the preoperative planning. METHODS: The clinical data of 100 patients (110 knees) who underwent Naton robot-assisted medial unicondylar knee arthroplasty between June 2023 and July 2024 was retrospectively analyzed, including 47 knees on left side and 63 knees on right side. There were 37 males (40 knees) and 63 females (70 knees) with a mean age of 65.4 years (range, 59-71 years). Body mass index was 22.2-28.6 kg/m ² (mean, 25.4 kg/m ²). The disease duration ranged from 1 to 8 years (mean, 3.4 years). Preoperative planning was performed by Naton robotic surgical system based on lower limb CT data. The final prosthesis size after osteotomy was recorded and compared with the preoperative plan to analyse whether it was consistent with the preoperative plan, as well as the situation of knee flexion and extension gaps (<0.5 mm, >2.0 mm) corresponding to the different models of prostheses. RESULTS: During operation, 5 patients (5 knees) were treated with traditional UKA due to mechanical arm failure, software obstacles, significant bone amputation bias, or loose reference frame, and were excluded from the final analysis. The remaining 95 patients (105 knees) successfully received Naton robot-assisted surgery, and no related complications occurred. The prosthesis size was consistent with the preoperative plan in 101 knees (96.2%) on the femur side, 100 knees (95.2%) on the tibia side, and 97 knees (92.4%) on both femur and tibia sides. The prosthesis size was inconsistent in 3 cases (2.86%) on the femur side alone, 4 cases (3.81%) on the tibial side alone, and 1 case (0.95%) on both femur and tibial sides. Among the prostheses with different models, the flexion and extension gaps were less than 0.5 mm in 3 knees, the flexion gap was less than 0.5 mm and the extension gap was more than 2.0 mm in 3 knees, and the flexion gap was more than 2.0 mm and the extension gap was less than 0.5 mm in 2 knees. CONCLUSION The accuracy of prosthesis size selection for Naton robot-assisted medial unicondylar knee arthroplasty is relatively high.
Humans ; Arthroplasty, Replacement, Knee/instrumentation* ; Female ; Male ; Middle Aged ; Aged ; Knee Prosthesis ; Retrospective Studies ; Robotic Surgical Procedures/methods* ; Prosthesis Design ; Knee Joint/surgery* ; Osteoarthritis, Knee/surgery* ; Range of Motion, Articular

OBJECTIVETo compare clinical efficacy of individual osteotomy instrument and total knee arthrolplasty (TKA) in treating patients with knee osteoarthritis.

METHODSFrom June 2014 to December 2014, 40 patients with unilateral knee osteoarthritis were randomly divided into two groups and 20 cases were in each group. One group (individual group) were treated with TKA with individual osteotomy instrument,including 5 males and 15 females with an average age of (67.3 ± 6.5) years old; 8 cases on the left side and 12 cases on the right side. Another group (conventional group) were treated with conventional TKA , including 6 males and 14 females with an average age of (66.8 ± 7.3) years old; 9 cases on the left side and 11 cases on the right side. Operative time, blood loss, postoperative HSS score at 6 months, and changes of mechanical alignment before and after operation were analyzed.

RESULTSOperative time in individual group was (79.3 ± 4.7) min, and (83.5 ± 3.2) min in conventional group; blood loss in individual group was (287.1 ± 24.9) ml and (363.4 ± 47.2) ml in conventional group, there were statistical differences between two groups in these two items. There was no significant difference in postoperative HSS score at 6 months between individual group (84.8 ± 3.2) and conventional group (84.2 ± 2.5). Postoperative limb alignment in individual group was (2.8 ± 0.6)°, and (2.8 ± 0.6)° in conventional group, with no significant difference between two groups.

CONCLUSIONTKA with individual osteotomy instrument could reduce operative time and blood loss, but there was no differences in knee function, changes of mechanical alignment compared with TKA.

Adult ; Aged ; Arthroplasty, Replacement, Knee ; methods ; Case-Control Studies ; Female ; Humans ; Knee Joint ; surgery ; Male ; Operative Time ; Osteoarthritis, Knee ; surgery ; Osteotomy ; instrumentation ; methods ; Treatment Outcome

OBJECTIVETo summarize experience of using screws and cement to rebuild tibial bone defect in primary total knee arthroplasty (TKA) and to discuss the relationship between the number of required screws and the severity of tibial bone defects.

METHODSFrom July 2009 to May 2015, 34 patients (40 knees) with varus knees underwent TKA, and the screw and cement technique was used to rebuild medial tibia plateau during operation. There were 8 males (8 knees) and 26 females (32 knees), and the average age was (65.00 +/- 7.25) years old (ranged,55 to 82 years old). One to 6 screws were used in each case. Extension stems were used in 2 cases (4 and 5 screws was used respectively). The area percentages of the bone defects measured as defect area/tibia plateau area, depth of each defect, the number of screws needed in each case, were all used to determine the relationship between the number of screws and the area percentage in certain depth of bone defect by statistic methods, as well as the relationship between screw number and defect depth.

RESULTSAll the patients were followed up and the average duration was 24 months (ranged, 1 to 72 months). The average preoperative HSS score was 43.33 +/- 6.11 (ranged, 32 to 51 scores). Whereas the average postoperative HSS score was 92.15 +/- 4.64 (ranged,83 to 96 scores). The preoperative individual scores including pain, function, activity, nuscle strength, flexion deformity and stability were all improved compared with preoperation,and the differences were statistically significant. All the patients received normal alignment postoperatively, femoraltibial angle was improved from (167.00 +/- 6.39) degrees preoperatively to (175.00 +/- 2.69) degrees postoperatively, the tibial angle was improved from (78.09 +/- 4.51) degrees preoperatively to (88.75 +/- 1.24) degrees postoperatively. Both area percentage and depth of bone defect in a fitting Ologistic model had a significant statistical relationship with the screw number, and a rectangular coordinate system could be formed according to the relationship.

CONCLUSIONScrews and cement technique is a simple, safe and convenient method to rebuild tibial bone defects in primary TKA and its short-term and midterm effect are both reliable. During opera- tion, according to the rectangular coordinate system, the screw number needed in the operation can be inferred form th area and depth of tibia defect, which could have a guiding function in surgery.

Aged ; Aged, 80 and over ; Arthroplasty, Replacement, Knee ; instrumentation ; methods ; Bone Screws ; utilization ; Female ; Fracture Fixation, Internal ; Humans ; Knee Injuries ; surgery ; Knee Joint ; surgery ; Male ; Middle Aged ; Tibia ; surgery

Aged ; Arthroplasty, Replacement, Knee ; adverse effects ; methods ; Case-Control Studies ; Female ; Follow-Up Studies ; Humans ; Incidence ; Intraoperative Care ; instrumentation ; methods ; Male ; Middle Aged ; Osteoarthritis, Knee ; surgery ; Postoperative Complications ; diagnosis ; epidemiology ; etiology ; prevention & control ; Recovery of Function ; Risk Assessment ; Singapore ; epidemiology ; Tourniquets ; adverse effects ; Treatment Outcome

BACKGROUND: The purpose of this study was to determine the degree of infection control and postoperative function for new articulating metal-on-cement spacer. METHODS: A retrospective study of 19 patients (20 cases), who underwent a two-stage revision arthroplasty using mobile cement prosthesis, were followed for a minimum of 2 years. This series consisted of 16 women and 3 men, having an overall mean age of 71 years. During the first stage of revision, the femoral implant and all the adherent cement was removed, after which it was autoclaved before replacement. The tibial component was removed and a doughy state, antibiotic-impregnated cement was inserted on the tibial side. To achieve joint congruency, intraoperative molding was performed by flexing and extending the knee joint. Each patient was evaluated clinically and radiologically. The clinical assessments included range of motion, and the patients were scored as per the Hospital for Special Surgery (HSS) and Knee Society (KS) criteria. RESULTS: The mean range of knee joint motion was 70degrees prior to the first stage operation and 72degrees prior to the second stage revision arthroplasty; following revision arthroplasty, it was 113degrees at the final follow-up. The mean HSS score and KS knee and function scores were 86, 82, and 54, respectively, at the final follow-up. The success rate in terms of infection eradication was 95% (19/20 knees). No patient experienced soft tissue contracture requiring a quadriceps snip. CONCLUSIONS: This novel technique provides excellent radiological and clinical outcomes. It offers a high surface area of antibiotic-impregnated cement, a good range of motion between first and second stage revision surgery for the treatment of chronic infection after total knee arthroplasty, and is of a reasonable cost.
Aged ; Anti-Bacterial Agents/*administration & dosage/*therapeutic use ; Arthroplasty, Replacement, Knee/*adverse effects/*instrumentation/methods ; Bone Cements/*therapeutic use ; Female ; Humans ; Male ; Middle Aged ; Prosthesis-Related Infections/*surgery ; Range of Motion, Articular/physiology ; Reoperation/*instrumentation/methods ; Retrospective Studies ; Treatment Outcome

BACKGROUND: The single radius total knee prosthesis was introduced with the advantage of reduced patellar symptoms; however, there is no long-term follow-up study of the same. The purpose of this study was to determine the survival rate of single radius posterior-stabilized total knee arthroplasty and patellofemoral complication rates in a consecutive series. METHODS: Seventy-one patients (103 knees) who underwent arthroplasty without patellar resurfacing using a single radius posterior-stabilized total knee prosthesis were followed up for a minimum 10 years. Clinical evaluation using Knee Society knee and function scores and radiologic evaluation were performed at regular intervals. Anterior knee pain as well as patellofemoral complications were evaluated with a simple questionnaire. The Kaplan-Meier product-limit method was used to estimate survival. RESULTS: Seventeen patients (23 knees) were excluded due to death (12 knees) or lost to follow-up (11 knees). Of the 80 knees enrolled, all femoral components and 78 tibial components were well fixed without loosening at final follow-up. Two revisions were performed because of tibial component loosening and periprosthetic joint infection. One patient with tibial component loosening refused to have revision surgery. No obvious tibial insert polyethylene wear was observed. The survivorships at 132 months were 96.7% using revision or pending revision as end points. Anterior knee pain was present in 6 patients (6 knees, 7.5%) at the latest follow-up. No patellofemoral complication requiring revision was encountered. CONCLUSIONS: The single radius posterior-stabilized total knee prosthesis demonstrated an excellent minimum 10-year survivorship. The low rates of implant loosening and 7.5% of anterior knee pain as a patellofemoral complication are comparable with those reported for other modern total knee prosthesis.
Aged ; Arthralgia/*surgery ; Arthroplasty, Replacement, Knee/*instrumentation/*methods ; Cementation ; Female ; Follow-Up Studies ; Humans ; Knee Joint/*surgery ; Knee Prosthesis ; Male ; Middle Aged ; Patella/surgery ; Prosthesis Failure ; Retrospective Studies ; Treatment Outcome

BACKGROUND: A two-stage revision remains as the "gold standard" treatment for chronically infected total knee arthroplasties. METHODS: Forty-five septic knee prostheses were revised with a minimum follow-up of 5 years. Static antibiotic-impregnated cement spacers were used in all cases. Intravenous antibiotics according to sensitivity test of the culture were applied during patients' hospital stay. Oral antibiotics were given for another 5 weeks. Second-stage surgery was undertaken after control of infection with normal erythrocyte sedimentation rate and C-reactive protein values. Extensile techniques were used if needed and metallic augments were employed for bone loss in 32 femoral and 29 tibial revisions. RESULTS: The average interval between the first-stage resection and reimplantation was 4.4 months. Significant improvement was obtained with respect to visual analog scale pain and clinical and functional scores, and infection was eradicated in 95.6% of cases following a two-stage revision total knee arthroplasty. Radiographic evaluation showed suitable alignment without signs of mechanical loosening. CONCLUSIONS: This technique is a reasonable procedure to eradicate chronic infection in knee arthroplasty and provides proper functional and clinical results. However, it sometimes requires extensile surgical approaches that could imply arduous surgeries. Metallic augments with cementless stems available in most of the knee revision systems are a suitable alternative to handle bone deficiencies, avoiding the use of bone allografts with its complications.
Aged ; Aged, 80 and over ; Anti-Bacterial Agents/*administration & dosage ; Arthroplasty, Replacement, Knee/*adverse effects ; Female ; Humans ; Knee Joint/physiology/radiography/surgery ; *Knee Prosthesis ; Male ; Middle Aged ; Prosthesis Design ; Prosthesis-Related Infections/*therapy ; Range of Motion, Articular ; Replantation/adverse effects/instrumentation/*methods ; Retrospective Studies ; Treatment Outcome

BACKGROUND: Despite the importance of soft tissue balancing during total knee arthroplasty (TKA), all estimating techniques are dependent on a surgeon's manual distraction force or subjective feeling based on experience. We developed a new device for dynamic gap balancing, which can offer constant load to the gap between the femur and tibia, using pneumatic pressure during range of motion. METHODS: To determine the amount of distraction force for the new device, 3 experienced surgeons' manual distraction force was measured using a conventional spreader. A new device called the consistent load pneumatic tensor was developed on the basis of the biomechanical tests. Reliability testing for the new device was performed using 5 cadaveric knees by the same surgeons. Intraclass correlation coefficients (ICCs) were calculated. RESULTS: The distraction force applied to the new pneumatic tensioning device was determined to be 150 N. The interobserver reliability was very good for the newly tested spreader device with ICCs between 0.828 and 0.881. CONCLUSIONS: The new pneumatic tensioning device can enable us to properly evaluate the soft tissue balance throughout the range of motion during TKA with acceptable reproducibility.
Arthroplasty, Replacement, Knee/*instrumentation/methods ; Biomechanics ; Equipment Design ; Femur/surgery ; Humans ; Knee Joint/physiology/*surgery ; Mechanical Processes ; Range of Motion, Articular ; Reproducibility of Results ; Tibia/surgery