A portion of patients undergoing implant restoration require bone augmentation procedures to ensure that there is sufficient bone volume around the implant. For the patients with horizontal bone ridge defects at edentulous sites, with or without mild to moderate vertical bone defects, the shell technique serves as a reliable and minimally invasive bone augmentation method with effective space maintenance. The shell technique involves fixating 1 mm cortical bone blocks to the recipient site, using retention screws and filling the gap between the bone block and recipient bed with particulate bone substitute materials, and covering the barrier membrane to achieve bone augmentation. The overlying tension-free soft tissue closure seals the surgical site while local peripheral blood releases osteoclasts and cytokines that gradually degrade the bone block. The rigid fixation of the bone block ensures a stable internal environment for osteogenesis and a new bone regeneration cycle. Although this technique demonstrates favorable bone augmentation outcomes, it is highly technique-sensitive. There are certain differences in the application scenarios and osteogenic processes for autologous and allogeneic bone shells. The selection of bone blocks and particulate bone substitute materials significantly influences the osteogenic biological process and the predictability of bone augmentation results. Complications associated with the shell technique possess distinct characteristics, such as the immunogenicity of allogeneic bone fragments, soft tissue cracking, and bone fragment loosening. Their prevention and subsequent management substantially impact the success rate of osteogenesis. This article delves into the biological mechanisms of osteogenesis in the bone block technique, summarizing the indications, clinical outcomes, classification of bone blocks, and surgical workflow management, as well as complication prevention and management, aiming to provide a reference for the future application and development of the bone shell technique.

Objective To investigate the impact of red blood cell suspension infusion across various perioperative periods on patients with valvular heart disease. Methods The patients with valvular heart disease admitted to Tianjin Chest Hospital from 2018 to 2020 were selected. Based on the timing of perioperative red cell suspension infusion, patients were categorized into three groups: a group 1 receiving intraoperative red cell suspension infusion, a group 2 receiving red cell suspension infusion within 24 hours after entering the ICU, and a group 3 receiving red cell suspension infusion at both time points. The laboratory results, perioperative blood component infusion volume, and other relevant parameters were retrospectively analyzed. After propensity score matching, the differences in different variables among the three groups were compared. Results After propensity score matching, 102 patients were enrolled, including 52 males and 50 females, with an average age of (61.74±10.58) years. There were 34 patients in each group. The preoperative hemoglobin (Hb) value of the group 2 was significantly higher than that of the group 1 and the group 3, and the amount of red cell suspension and autoblood transfusion was the lowest (P<0.05). Group 1 had the highest postoperative Hb, as well as the highest Hb and hematocrit (HCT) levels within 24 hours post-surgery (P<0.05). The group 1 had the lowest plasma, platelet and cryoprecipitate infusion volumes, and the shortest cardiopulmonary bypass time, aortic occlusion time, postoperative ICU stay and hospital stay, and the least blood loss and total drainage volume (P<0.05). The difference between postoperative and preoperative Hb (△Hb1) was highest in group 1 (P<0.05). Conclusion For patients with valvular heart disease, intraoperative-only infusion of red blood cell suspension is associated with a better prognosis at discharge and during follow-up.

ObjectiveThis study employs a special conformational engineering (CE) technology to construct an α-chymotrypsin-like active center, which includes a catalytic triad, an oxyanion hole, and a substrate-binding site, on silver nanoparticles (AgNPs), thereby creating an AgNP-based artificial hydrolase with high catalytic activity. This study provides a new approach for the design of highly efficient artificial enzymes and enzyme-mimicking. MethodsAgNPs were chosen as the scaffold to build the an α-chymotrypsin-like active center. A special CE procedure enables the designed peptide, Triad5, to adopt an α‑helical conformation on AgNPs, with the key catalytic residues located on one side of the α-helix forming a catalytic active center with a catalytic triad, an oxyanion hole, and a substrate-binding site. The CE procedure consists of three steps, including conformation induction via trifluoroethanol (TFE), conformation stabilization on AgNPs via Ag-S bonds, and TFE removal via lyophilization. Circular dichroism (CD) spectra were used to confirm the formation and stabilization of the α-helix conformation. Mutations of the key residues combined with stopped-flow kinetic experiments were used to demonstrate the indispensability of each key residue and the synergistic effects among the catalytic triad, the oxyanion hole, and the substrate-binding site. ResultsCD spectra show that the designed Triad5 alone is in random coil conformation; when conjugated on AgNPs, Triad5 still remains largely unstructured; but after the CE treatment, Triad5 adopts a typical α-helical conformation on AgNPs as designed, thus produces an AgNP-based artificial hydrolase, Silverzyme. Silverzyme exhibits extremely high hydrolytic activity towards p-nitrophenyl acetate (p-NPA), with an extremely high catalytic turnover number per active site of 3.5 s^-1, which is even higher than that of α-chymotrypsin. As a comparison, the AgNP-Triad5 conjugate without CE treatment shows much lower catalytic activity than Silverzyme, highlighting the important role of the right conformation of the active center for the catalytic activity and the power of the CE treatment. When the key residues of the catalytic triad of Silverzyme were mutated to alanine, the overall catalytic efficiency of this mutant dropped by about 2 orders of magnitude, unambiguously demonstrating the key role of the designed catalytic triad. Similarly, when the residues for the oxyanion hole were deleted, the mutant with the intact catalytic triad also showed significantly decreased catalytic activity, highlighting the indispensable role of the oxyanion hole for the catalytic activity. Unexpectedly, when both the catalytic triad and the oxyanion hole were kept intact, a slight change of the binding site also resulted in significantly decreased catalytic activity, indicating that the designed binding site is at the right position to align the substrate in the right orientation in the active center for catalytic hydrolysis. These results confirm the synergy among the catalytic triad, the oxyanion hole, and the substrate-binding site, indicating successful mimicking of the active center of α-chymotrypsin. Moreover, Silverzyme shows better thermal stability than α-chymotrypsin, and can even hydrolyze the tough non-activated ester diethyl phthalate, a priority pollutant by the United States Environmental Protection Agency (USEPA). ConclusionThis study successfully mimicked the complex catalytic active center of α-chymotrypsin using a conformational engineering strategy, and produced a highly active artificial hydrolase with a well-defined structure and catalytic mechanism. The findings highlight the significant potential of conformational engineering.

Subacute cholecystitis complicated by gallbladder perforation often manifests as inflammatory lesions around the gallbladder， and it is extremely rare for this condition to cause massive hemorrhage into the omental bursa with secondary infection and result in massive hemorrhagic abscess. This article reports a case of a female patient， aged 68 years， who experienced massive hemorrhagic abscess in the omental bursa due to localized perforation and bleeding caused by a stone impacted in the gallbladder neck. The patient had a history of gallstones for 30 years and was admitted to Tianjin Nankai Hospital， Tianjin Medical University， after tertiary referral due to aggravated abdominal pain， chills， and fever. After comprehensive assessment by a multidisciplinary team， the patient underwent emergency laparoscopic cholecystectomy and clearance of the hemorrhagic abscess in the omental bursa. The patient recovered well and was discharged on day 10 after surgery， with good conditions during follow-up.

OBJECTIVE To evaluate the quality of Lufu Pill （LFP）.METHODS The high-performance liquid chromatography （HPLC） fingerprint of LFP was established using the Similarity Evaluation System for Chromatographic Fingerprint of Traditional Chinese Medicine （2012 Edition）， and similarity evaluation was performed. Hierarchical cluster analysis （HCA）， principal component analysis （PCA）， and orthogonal partial least squares-discriminant analysis （OPLS-DA） were performed using SIMCA 14.1 software. The contents of strychnine， brucine， liquiritin， notoginsenoside R 1 ， ginsenoside Rg 1 ， ginsenoside Rb 1 ， licoricesaponin G 2 ， and ginsenoside Rd in 12 batches of samples were determined by the HPLC method.RESULTS A total of 26 common peaks were identified in the HPLC fingerprint of 12 batches of LFP samples， and eight common peaks were identified as strychnine （peak 3）， brucine （peak 4）， liquiritin （peak 6）， notoginsenoside R 1 （peak 7）， ginsenoside Rg 1 （peak 8）， ginsenoside Rb 1 （peak 15）， licoricesaponin G 2 （peak 17）， and ginsenoside Rd （peak 18）. The similarities of 12 batches of LFP samples were all greater than 0.90. The results of HCA and PCA both showed that the 12 batches of samples were divided into two categories： S2， S4-S6， and S12 were grouped into one category， while S1， S3， S7-S11 were grouped into another category. The upper control limits for Hotelling’s T 2 and DMod X were 16.631 and 1.578， respectively. The variable importance in projection values of ginsenoside Rg 1 （peak 8）， ginsenoside Rb 1 （peak 15）， peak 20， strychnine （peak 3）， peak 11， notoginsenoside R 1 （peak 7）， peak 2， peak 17， peak 13， peak 10， ginsenoside Rd （peak 18）， peak 23， peak 26， peak 21， and peak 24 were greater than 1.The content determination results showed that strychnine， brucine， liquiritin， notoginsenoside R 1 ， ginsenoside Rg 1 ， ginsenoside Rb 1 ， licoricesaponin G 2 ， and ginsenoside Rd were 0.005%-0.018%， 0.005%-0.010%， 0.050%-0.118%， 0.033%-0.073%， 0.132%-0.248%， 0.122%-0.242%， 0.021%-0.043%， and 0.016%-0.048%， respectively.CONCLUSIONS The established HPLC fingerprint and content determination method are accurate and reproducible， and can be used for the quality evaluation of LFP. Ginsenoside Rg 1 ， ginsenoside Rb 1 ， strychnine， notoginsenoside R 1 ， and ginsenoside Rd may be the differential components affecting its overall quality.

PURPOSE: Intertrochanteric fracture (ITF) classification is crucial for surgical decision-making. However, orthopedic trauma surgeons have shown lower accuracy in ITF classification than expected. The objective of this study was to utilize an artificial intelligence (AI) method to improve the accuracy of ITF classification. METHODS: We trained a network called YOLOX-SwinT, which is based on the You Only Look Once X (YOLOX) object detection network with Swin Transformer (SwinT) as the backbone architecture, using 762 radiographic ITF examinations as the training set. Subsequently, we recruited 5 senior orthopedic trauma surgeons (SOTS) and 5 junior orthopedic trauma surgeons (JOTS) to classify the 85 original images in the test set, as well as the images with the prediction results of the network model in sequence. Statistical analysis was performed using the SPSS 20.0 (IBM Corp., Armonk, NY, USA) to compare the differences among the SOTS, JOTS, SOTS + AI, JOTS + AI, SOTS + JOTS, and SOTS + JOTS + AI groups. All images were classified according to the AO/OTA 2018 classification system by 2 experienced trauma surgeons and verified by another expert in this field. Based on the actual clinical needs, after discussion, we integrated 8 subgroups into 5 new subgroups, and the dataset was divided into training, validation, and test sets by the ratio of 8:1:1. RESULTS: The mean average precision at the intersection over union (IoU) of 0.5 (mAP50) for subgroup detection reached 90.29%. The classification accuracy values of SOTS, JOTS, SOTS + AI, and JOTS + AI groups were 56.24% ± 4.02%, 35.29% ± 18.07%, 79.53% ± 7.14%, and 71.53% ± 5.22%, respectively. The paired t-test results showed that the difference between the SOTS and SOTS + AI groups was statistically significant, as well as the difference between the JOTS and JOTS + AI groups, and the SOTS + JOTS and SOTS + JOTS + AI groups. Moreover, the difference between the SOTS + JOTS and SOTS + JOTS + AI groups in each subgroup was statistically significant, with all p < 0.05. The independent samples t-test results showed that the difference between the SOTS and JOTS groups was statistically significant, while the difference between the SOTS + AI and JOTS + AI groups was not statistically significant. With the assistance of AI, the subgroup classification accuracy of both SOTS and JOTS was significantly improved, and JOTS achieved the same level as SOTS. CONCLUSION In conclusion, the YOLOX-SwinT network algorithm enhances the accuracy of AO/OTA subgroups classification of ITF by orthopedic trauma surgeons.
Humans ; Hip Fractures/diagnostic imaging* ; Orthopedic Surgeons ; Algorithms ; Artificial Intelligence

Objective To analyze and sort out the current situation,hot spots and evolution trend in the research field of comprehensive budget management in public hospitals,so as to provide reference for academic research and practice related to comprehensive budget management in public hospitals.Methods CiteSpace and VOSviewer bibliometrics software was used to draw a knowledge map,and relevant researches in the field of comprehensive budget management of public hospitals in CNKI data-base were analyzed to clarify the annual number of publications,authors,institutions,topic clustering and hot spots.Results The number of published documents maintained a high level and continued to develop;There is less cooperation among domestic au-thors,and most of them conduct research independently.The issuing institutions are mainly concentrated in public hospitals,and the cooperation among institutions is less.The research topics focus on the current situation and problems,system construction and method research,management model improvement and so on.Conclusion The comprehensive budget management research of public hospitals has experienced three stages:slow exploration period,rapid development period and continuous development peri-od,and the research content shows the development trend of"exploring system-promoting practice-optimizing mode".

OBJECTIVE: To standardize the operative procedure for tissue-engineered cartilage repair, by demonstrating surgical technique of arthroscopic implantation of decalcified cortex-cancellous bone scaffolds, and summarizing the surgical experience of the sports medicine department team at Peking University Third Hospital. METHODS: This article elaborates on surgical techniques and skills, focusing on the unabridged implantation technology and surgical procedure of decalcified cortex-cancellous bone scaffolds under arthroscopy: First, the patient was placed in the supine position. After anesthesia had been established, the surgeon established an arthroscope and explored the damaged area under the scope. After confirming the size and location of the injury site, the surgeon cleaned the damaged cartilage, and also trimmed the edges of the cartilage to ensure that the cut surface was smooth and stable. the surgeon performed the micro-fracture surgery in the area of cartilage injury, and then measured the size of the injured area under the scope. Next, the surgeon manually trimmed the tissue-engineered scaffold based on the measurements taken under the arthroscope, and then directly implanted the scaffold using a sleeve. A honeycomb-shaped fixator was used to implant absorbable nails to fix the scaffold. After the scaffold was installed, the knee was repeatedly flexed and extended for 10-20 times to ensure stability and range of motion. Finally, the arthroscope was withdrawn and the wound was closed. RESULTS: Decalcified cortex-cancellous bone scaffolds possessed unparalleled advantages over synthetic materials in terms of morphology and biomechanics. The cancellous bone part of the scaffold provided a three-dimensional, porous space for cell growth, while the cortical bone part offered the necessary mechanical strength. The surgery was performed entirely under arthroscopy to minimize invasiveness to the patient. Absorbable pins were used for fixation to ensure the stability of the scaffold. This technique could effectively improve the prognosis of the patients with cartilage injuries and standardized the surgical procedures for arthroscopic tissue-engineered scaffold operations in the patients with cartilage damage. CONCLUSION With the standard arthroscopic tissue-engineered scaffold repair technique, it is possible to successfully repair damaged cartilage, alleviate symptoms in the short term, and provide a more ideal long-term prognosis. The author and their team explain the surgical procedures for tissue-engineered scaffolds under arthroscopy, with the aim of guiding future clinical practice.
Tissue Engineering/methods* ; Humans ; Tissue Scaffolds ; Arthroscopy/methods* ; Cartilage, Articular/surgery*

OBJECTIVES: To reprogram human placental fibroblasts (HPFs) into chemically induced epithelioid-like cells (ciEP-Ls) using a combination of small-molecule compounds. METHODS: HPFs cultured under normoxic conditions were identified using immunofluorescence assay, PCR and chromosomal karyotyping. Under hypoxic conditions (37 ℃, 5% O₂), HPFs were cultured in a medium containing small-molecule compounds C6TSEDRVAJZ (CHIR99021, 616452, TTNPB, SAG, EPZ5676, DZNep, Ruxolitinib, VTP50469, Afuresertib, JNK-IN-8, and EZM0414), and the cell morphology was observed daily. The expression levels of epithelial cell markers in the induced cells were detected by immunofluorescence, Western blotting and PCR. Chromosomal karyotyping of the induced cells was performed and the induction efficiency was calculated. RESULTS: Before induction, HPFs showed positive expressions of fibroblast surface markers CD34 and vimentin and were negative for epithelial surface markers. PCR results showed high expressions of fibroblast-specific genes S100A4 and COL1A1 in HPFs with a normal human diploid karyotype. After one day of induction, the HPFs underwent morphological changes from a multinodular spindle shape to a round or polygonal shape, which was morphologically characteristic of ciEP-Ls. On day 4 of induction, the cells exhibited high expressions of the epithelial cell markers E-cadherin and Lin28A. RT-qPCR results also showed that the cells expressed the epithelial markers Smad3, GLi3, PAX8, WT1, KRT19, and KRT18 with significantly down-regulated expressions of all the fibroblast surface markers and a normal human diploid karyotype. The reprogramming efficiency of HPFs into ciEP-Ls ranged from (64.53±2.8)% to (68.10±3.6)%. CONCLUSIONS The small-molecule compound combination C6TSEDRVAJZ is capable of inducing HPFs into ciEP-Ls under hypoxic conditions with a high induction efficiency.
Humans ; Fibroblasts/drug effects* ; Pregnancy ; Female ; Cell Differentiation/drug effects* ; Pyrimidines/pharmacology* ; Placenta/cytology* ; Cells, Cultured ; Pyridines/pharmacology* ; Pyrazoles/pharmacology* ; Epithelial Cells/cytology*

Drug toxicity is closely related to both clinical drug safety and new drug development. Therefore, it is vital to understand the mechanisms of drug toxicity fully and to use appropriate research models with advanced technologies. Zebrafish has become an important vertebrate animal model for high-throughput drug screening and toxicity assessment. At the same time, zebrafish has an intact biological complexity, reflecting the whole organism's toxicity, which gives it an advantage over other high-throughput models in toxicity studies. Despite the gradual increase in toxicity studies utilizing zebrafish, a comprehensive and systematic review of the underlying mechanisms and new techniques is still lacking. This review aims to analyze common toxicity mechanisms in zebrafish models, such as oxidative stress, endoplasmic reticulum stress, inflammation, and apoptosis, and macroscopic changes in biological processes like lipid metabolism disorders and neurotransmitter expression abnormalities. It also introduces new technologies applied in toxicity assessment, such as gene editing, novel fluorescence imaging technology, 3D imaging technology, and novel automated technology for high-throughput screening, such as fish capsules. In addition, it also summarizes the advantages and disadvantages of the model. By doing so, it will provide new suggestions for the development and improvement of the model, make it better serve the toxicity study of clinical drugs and provide a more comprehensive perspective for drug toxicity study, thus promoting the development of the field of drug toxicity study.