ObjectiveTo evaluate the detection specificity for clinical samples and the detection capability for standard substances of five commercially available multiplex polymerase chain reaction (PCR) nucleic acid detection kits (hereinafter referred to as the kits) for respiratory pathogens, and to provide a reference for selecting appropriate detection kits for multi-pathogen nucleic acid testing of respiratory infections. MethodsA total of 60 respiratory pathogen-positive clinical samples with known redults were selected and tested using the five kits (labeled as A, B, C, D, and E). The detection rates and Kappa coefficients were calculated to evaluate the consistency between the results from these kits and those from single-pathogen PCR kits. According to the limit of detection (LOD) provided by the kits, standard substances of respiratory pathogens (including 12 types such as influenza virus, Mycoplasma pneumoniae, and Bordetella pertussis) were diluted to four concentrations (250, 500, 1 000, and 2 000 copies·mL⁻¹). All five kits were used for detection to evaluate their respective detection capabilities. ResultsCompared with the results from single-pathogen PCR kits, the five tested kits demonstrated good consistency (all Kappa >0.80). Among them, Kit A had the highest detection rate (100.00%), followed by Kits C and E (98.33%), and then Kits B and D (95.00%). All five kits showed a relatively low false negative rate (FNR) for samples with a cycle threshold (Ct) value ≤35 (≤2.38%). However, for samples with Ct values>35, the FNR increased accordingly(average FNR=6.67%, P=0.029). Kit C exhibited the highest detection sensitivity for the tested standard substances (average LOD: 458.33 copies·mL⁻¹), followed by Kit D, then Kits A/E, and finally Kit B. ConclusionThe five multiplex PCR kits showed good consistency with single-pathogen detection results, but each had its own performance emphasis. Kit A, with the highest detection rate and high throughput, is suitable for targeted viral screening. Kit B, covering the broadest pathogen spectrum (including fungi/bacteria), is suitable for comprehensive respiratory pathogen screening. Kits C, D and E, are applicable for rapid detection. It is important to note that the detection efficacy of all kits decreases for low viral load samples with Ct values >35. In practical application, selection should be based on specific screening objectives, throughput requirements, and sample types.

OBJECTIVE To form an expert consensus addressing clinical issues regarding the use of parenteral direct thrombin inhibitors （DTIs） in special populations. METHODS Led by the Sichuan Academy of Medical Sciences & Sichuan Provincial People’s Hospital（the Affiliated Hospital of UESTC）， a multidisciplinary working group was formed comprising experts from multiple fields， including clinical pharmacy， cardiac surgery， obstetrics， pediatrics and evidence-based medicine. Through literature review and the Delphi method， clinical questions regarding the efficacy and safety of parenteral DTIs used in special populations were identified. A structured design was adopted using the “Population-Intervention-Comparison-Outcome” （PICO） framework；systematic searches were conducted in CJFD， PubMed， Embase and other databases. Relevant evidence from randomized controlled trials，cohort studies and systematic reviews were included and synthesized. Evidence quality was assessed using the Grading of Recommendations Assessment，Development and Evaluation （GRADE） approach， and recommendations were formulated through three rounds of Delphi surveys and expert consensus meetings. RESULTS &CONCLUSIONS Seven clinical questions were ultimately selected （with a consensus rate exceeding 90%）， resulting in the formulation of seven recommendations on the use of parenteral DTIs in special populations， including children， pregnant women， patients with hepatic or renal impairment， patients with mesenteric venous thrombosis， and individuals with thrombophilia. These recommendations clarify the preferred agents， dosing ranges， monitoring parameters， and safety management strategies for parenteral DTIs in these special populations. This expert consensus， which is formulated based on the best available evidence， provides evidence-based guidance for standardized and individualized use of parenteral DTIs in special populations.

ObjectiveTo decipher the mechanism by which Zuoguiwan （ZGW） treat hyperthyroidism in rats with kidney-Yin deficiency based on the dopamine receptor D4 （DRD4）/nicotinamide adenine dinucleotide phosphate （NADPH） oxidase 4 （NOX4） signaling pathway. MethodsThe rat model of kidney-Yin deficiency was induced by unilateral intramuscular injection of dexamethasone （0.35 mg·kg^-1）. After successful modeling， the rats were randomized into model， methimazole （positive control， 5 mg·kg^-1）， low-， medium-， and high-dose （1.85， 3.70， 7.40 g·kg^-1， respectively） ZGW， and normal control groups. After 21 days of continuous gavage， the behavioral indexes and body weight changes of rats were evaluated. The pathological changes of the renal tissue were observed by hematoxylin-eosin staining. The serum levels of thyroid hormones ［triiodothyronine （T₃）， thyroxine （T₄）， thyroid-stimulating hormone （TSH）］， renal function indexes ［serum creatine （Scr） and blood urea nitrogen （BUN）］， energy metabolism markers ［cyclic adenosine monophosphate （cAMP） and cyclic guanosine monophosphate （cGMP）］， and oxidative stress-related factors ［superoxide dismutase （SOD）， malondialdehyde （MDA）， and NADPH）］ were measured by enzyme-linked immunosorbent assay （ELISA）. Western blot was employed to analyze the expression of DRD4， NOX4， mitochondrial respiratory chain complex proteins ［NADH：ubiquinone oxidoreductase subunit S4 （NDUFS4） and cytochrome C oxidase subunit 4 （COX4）］， and inflammation-related protein ［tumor necrosis factor-alpha （TNF-α）， interleukin-6 （IL-6）， p38 mitogen-activated protein kinase （MAPK）］ pathway in the renal tissue. ResultsCompared with the normal group， the model group showed mental malaise， body weight decreases （P<0.01）， inflammatory cell infiltration in the renal tissue， a few residual parotid glands in the thyroid， elevations in serum levels of T₃， T₄， Scr， BUN， cAMP， cAMP/cGMP， MDA， and NADPH （P<0.01）， down-regulation in protein levels of TSH， SOD， and DRD4 （P<0.05， P<0.01）， and up-regulation in expression of NOX4， p-p38 MAPK/p38 MAPK， and inflammatory factors （P<0.01）. Compared with the model group， ZGW increased the body weight （P<0.05， P<0.01）， reduced the infiltration of renal interstitial inflammatory cells， restored the thyroid structure and follicle size， lowered the serum levels of T₃， T₄， Scr， BUN， cAMP， cAMP/cGMP， MDA and NADPH （P<0.05， P<0.01）， up-regulated the expression of TSH， SOD and DRD4 （P<0.05， P<0.01）， and down-regulated the expression of NOX4， p-p38 MAPK/p38 MAPK， and inflammatory factors （P<0.05， P<0.01）. Moreover， high-dose ZGW outperformed methimazole （P<0.05）. ConclusionBy activating DRD4， ZGW can inhibit the expression of NOX4 mediated by the p38 MAPK pathway， reduce oxidative stress and inflammatory response， thereby ameliorating the pathological state of hyperthyroidism due to kidney-Yin deficiency. This study provides new molecular mechanism support for the clinical application of ZGW.

Objective To investigate the species of sandflies and the prevalence of Leishmania infections in sandflies from selected areas of northern and northwestern China, so as to provide insights into identification of leishmaniasis vectors and assessment of epidemiological trends of leishmaniasis in China. Methods Sandfly samples were collected from Mentougou District of Beijing Municipality, Xiangning County in Linfen City of Shanxi Province, Ejin Banner in Alxa League of Inner Mongolia Autonomous Region, and Payzawat County of Karamay District of Karamay City, Gaochang District of Turpan City in Xinjiang Uygur Autonomous Region from July 2023 to July 2024. Approximately 100 intact female sandfly samples were randomly selected from each site and the species of sandflies was identified according to morphological characteristics and molecular assays. Female sandflies originating from the same habitat were grouped into pools of 10 individuals. Leishmania infection was detected using polymerase chain reaction (PCR) assay targeting the internal transcribed spacer 1 (ITS-1) gene, and the prevalence of Leishmania infection was calculated in sandflies from different sampling sites using the minimum infection rate (MIR) method. In addition, positive amplicons were sequenced and subjected to phylogenetic analysis. Results A total of 6 155 sandflies were collected from different environments at sampling sites across the six aforementioned regions from July 2023 to July 2024. Phlebotomus chinensis (96.00%) was the dominant sandfly species in Mentougou District, Beijing Municipality, with a small proportion of Ph. sergenti (4.00%), and only Ph. chinensis was found in Xiangning County, Linfen City, Shanxi Province. Ph. wui was the only sandfly species detected in Ejin Banner, Alxa League, Inner Mongolia Autonomous Region, and Payzawat County, Kashgar City, Xinjiang Uygur Autonomous Region, and Ph. caucasicus (97.70%) was the dominant sandfly species in Karamay District, Karamay City, Xinjiang Uygur Autonomous Region, with a small proportion of Ph. wui (2.30%), while Ph. alexandri was the only species in Gaochang District, Turpan City, Xinjiang Uygur Autonomous Region. A total of 40, 60, 34, 18, 18, and 22 pools of sandfly samples were tested from Mentougou District in Beijing Municipality, Xiangning County in Linfen City of Shanxi Province, Ejin Banner in Alxa League of Inner Mongolia Autonomous Region, Payzawat County in Kashgar City, Karamay District in Karamay City, and Gaochang District in Turpan City of Xinjiang Uygur Autonomous Region, respectively. L. infantum was detected in Ph. chinensis samples from Mentougou District in Beijing Municipality, and Xiangning County of Linfen City in Shanxi Province, with MIR of 0.25% to 1.00%, and L. donovani was detected in Ph. wui from Ejin Banner in Alxa League of Inner Mongolia Autonomous Region, and Payzawat County in Kashgar City of Xinjiang Uygur Autonomous Region, with MIR of 0.56% to 0.88%; however, no Leishmania infection was detected in Ph. caucasicus from Karamay District in Karamay City or Ph. alexandri from Gaochang District in Turpan City of Xinjiang Uygur Autonomous Region. Phylogenetic analysis showed that the Leishmania ITS-1 gene sequences obtained from Mentougou District in Beijing Municipality and Xiangning County in Linfen City of Shanxi Province were clustered into the same clade with the reference sequences of L. infantum ITS-1 gene, while the Leishmania ITS-1 gene sequences obtained from Ejin Banner in Alxa League of Inner Mongolia Autonomous Region and Payzawat County in Kashgar City of Xinjiang Uygur Autonomous Region were clustered into the same clade with the reference sequences of L. donovani ITS-1 gene. Conclusions There are variations in sandfly species in selected areas of northern and northwestern China, and variations in the species of Leishmania infecting sandflies. Improved surveillance of sandfly vectors and targeted control strategies with adaptations to geographical features and leishmaniasis vectors are recommended.

ObjectiveZheng’s San Qi San (ZSQS) power, a classic traditional Chinese medicine (TCM) formula, is used for treating soft tissue injuries involving muscles, tendons, and ligaments. However, its underlying therapeutic mechanisms remain unclear. This study aimed to screen and identify pharmaceutically active ingredients and their candidate biomolecule targets, and further elucidate the molecular mechanism of ZSQS in the treatment of skeletal muscle injury. MethodsNetwork pharmacology was employed to construct “ZSQS-component-target”, “protein-protein interaction (PPI)” and “active ingredient-core protein-pathway” networks to predict the key active ingredients and potential core targets of ZSQS for skeletal muscle injury. The predicted results were then validated via microarray data from the GEO database. Molecular docking was then performed to assess the binding ability between the screened active ingredients of ZSQS and the candidate core targets. Moreover, liquid chromatography-mass spectrometry (LC-MS) was used for qualitative and quantitative analysis to verify the active components of the drug and ZSQS serum. Finally, an animal model of eccentric exercise-induced skeletal muscle injury and a myotube cell model of oxidative stress-induced injury were established to validate the effects of ZSQS and its interventional effects on the biological functions of critical targets, thereby demonstrating the potential therapeutic mechanism of ZSQS. ResultsAmong the 111 active components identified in ZSQS and their corresponding 204 targets related to the skeletal muscle injury repair process, 14 core targets (including AKT1) and 4 core active components (quercetin, luteolin, kaempferol, and β‑sitosterol) were screened out, while the corresponding metabolites of quercetin, luteolin and kaempferol were detected in the ZSQS serum. Among these targets, 5 candidate genes (IL-6, CASP3, HIF1A, STAT3, and JUN) overlapped with the differential expression screening results with GEO data, and IL-6 was confirmed to be enriched in the PI3K/AKT pathway. Combined with the prediction results of the AKT expression levels, these findings suggest that the phosphorylation level of AKT1 plays a core role in the therapeutic mechanism of ZSQS. Molecular docking analysis further revealed that the PH domain of AKT1 had high binding energy with all 4 core active components, as verified by LC-MS. Finally, animal model studies have shown the promoting effect of ZSQS administration on skeletal muscle injury repair and its possible antioxidant damage mechanism. Cell model studies further demonstrated that ZSQS-containing serum, core active ingredient combination therapy, and quercetin monomer could increase the phosphorylation level of AKT, promote the nuclear translocation of Nrf2, upregulate the expression of downstream antioxidant enzymes (SOD, GPx, and GR), and inhibit the expression of inflammatory factors (IL-6 and TNF-α), thereby alleviating oxidative stress and the inflammatory response. ConclusionZSQS alleviates skeletal muscle injury mainly by activating the AKT/Nrf2 signaling pathway, enhancing cellular antioxidant and anti-inflammatory capabilities. The results of this study provide a scientific basis for the clinical application and modernized development of ZSQS.

BACKGROUND:Sarcopenia is an age-related condition characterized by the loss of skeletal muscle mass,strength,and/or physical function.Currently,effective treatments for sarcopenia remain limited.A new therapeutic approach to improve symptoms and prognosis of sarcopenia patients clinically was important.OBJECTIVE:To explore the effects of canine adipose-derived mesenchymal stem cells and their exosomes on a dexamethasone-induced sarcopenia in mice.METHODS:Mesenchymal stem cells were isolated and cultured from canine adipose tissue,and identified and functionally evaluated through flow cytometry and differentiation assays for osteogenesis,adipogenesis,and chondrogenesis.Subsequently,exosomes from adipose-derived mesenchymal stem cells were extracted and characterized using transmission electron microscopy,western blot assay,and nanocoulter tracking analysis.In vitro,the effects of canine adipose-derived mesenchymal stem cells and their exosomes on myotube growth and the expression of muscle atrophy-related genes were investigated using dexamethasone-induced C2C12 myotube atrophy and aging C2C12 models.In vivo,a dexamethasone-induced mouse sarcopenia model was established and received intraperitoneal or intravenous injection of canine adipose-derived mesenchymal stem cells.Therapeutic efficacy was assessed through mouse rotarod performance,histopathological analysis,and muscle atrophy-related genes testing.RESULTS AND CONCLUSION:(1)The isolated canine adipose-derived mesenchymal stem cells highly expressed CD73,CD90,and CD105,and lowly expressed MHC-Ⅱ,CD14,CD19,CD34,and CD45,and successfully differentiated into osteoblasts,adipocytes,and chondrocytes in vitro.(2)The adipose-derived mesenchymal stem cells-derived exosomes met the identification criteria in terms of particle size,electron microscopy morphology,and positive expression of specific markers.(3)Compared to the dexamethasone-induced C2C12 atrophy group,treatment with adipose-derived mesenchymal stem cells and their exosomes promoted the recovery and growth of myotubes,inhibited the expression of muscle atrophy-related genes MuRF1 and Atrogin-1.(4)Compared to the aging C2C12 group,adipose-derived mesenchymal stem cells and their exosomes significantly enhanced the recovery and growth of aged muscle tubes in aging cells.(5)Compared to the control group,the rotarod time in dexamethasone-induced sarcopenia model mice was significantly decreased(P＜0.01).After 7 days(P＜0.01,P＜0.01)and 10 days(P＜0.01,P＜0.05)of adipose-derived mesenchymal stem cells treatment via intraperitoneal and intravenous injection,rotarod time was significantly increased,respectively.After 14 days,all treatment groups showed longer rotarod times than the model group,although with no significant differences between them.(6)Compared to the control group,the cross-sectional area of anterior tibial muscle in the model group was significantly reduced(P＜0.01),and it was significantly increased after intraperitoneal and intravenous administration of adipose-derived mesenchymal stem cells(P＜0.05,P＜0.01).(7)Compared to the model group,intraperitoneal and intravenous administration of adipose-derived mesenchymal stem cells significantly inhibited the mRNA expression of MuRF1 and Atrogin-1 genes(P＜0.01,P＜0.01,P＜0.01,P＜0.01).The results indicated that adipose-derived mesenchymal stem cells and their exosomes promoted recovery and growth of atrophic myotube cells by inhibiting the expression of muscle atrophy-related genes,and both intraperitoneal and intravenous administration of adipose-derived mesenchymal stem cells provided good therapeutic effects on sarcopenia in mice.

BACKGROUND:Sarcopenia is an age-related condition characterized by the loss of skeletal muscle mass,strength,and/or physical function.Currently,effective treatments for sarcopenia remain limited.A new therapeutic approach to improve symptoms and prognosis of sarcopenia patients clinically was important.OBJECTIVE:To explore the effects of canine adipose-derived mesenchymal stem cells and their exosomes on a dexamethasone-induced sarcopenia in mice.METHODS:Mesenchymal stem cells were isolated and cultured from canine adipose tissue,and identified and functionally evaluated through flow cytometry and differentiation assays for osteogenesis,adipogenesis,and chondrogenesis.Subsequently,exosomes from adipose-derived mesenchymal stem cells were extracted and characterized using transmission electron microscopy,western blot assay,and nanocoulter tracking analysis.In vitro,the effects of canine adipose-derived mesenchymal stem cells and their exosomes on myotube growth and the expression of muscle atrophy-related genes were investigated using dexamethasone-induced C2C12 myotube atrophy and aging C2C12 models.In vivo,a dexamethasone-induced mouse sarcopenia model was established and received intraperitoneal or intravenous injection of canine adipose-derived mesenchymal stem cells.Therapeutic efficacy was assessed through mouse rotarod performance,histopathological analysis,and muscle atrophy-related genes testing.RESULTS AND CONCLUSION:(1)The isolated canine adipose-derived mesenchymal stem cells highly expressed CD73,CD90,and CD105,and lowly expressed MHC-Ⅱ,CD14,CD19,CD34,and CD45,and successfully differentiated into osteoblasts,adipocytes,and chondrocytes in vitro.(2)The adipose-derived mesenchymal stem cells-derived exosomes met the identification criteria in terms of particle size,electron microscopy morphology,and positive expression of specific markers.(3)Compared to the dexamethasone-induced C2C12 atrophy group,treatment with adipose-derived mesenchymal stem cells and their exosomes promoted the recovery and growth of myotubes,inhibited the expression of muscle atrophy-related genes MuRF1 and Atrogin-1.(4)Compared to the aging C2C12 group,adipose-derived mesenchymal stem cells and their exosomes significantly enhanced the recovery and growth of aged muscle tubes in aging cells.(5)Compared to the control group,the rotarod time in dexamethasone-induced sarcopenia model mice was significantly decreased(P＜0.01).After 7 days(P＜0.01,P＜0.01)and 10 days(P＜0.01,P＜0.05)of adipose-derived mesenchymal stem cells treatment via intraperitoneal and intravenous injection,rotarod time was significantly increased,respectively.After 14 days,all treatment groups showed longer rotarod times than the model group,although with no significant differences between them.(6)Compared to the control group,the cross-sectional area of anterior tibial muscle in the model group was significantly reduced(P＜0.01),and it was significantly increased after intraperitoneal and intravenous administration of adipose-derived mesenchymal stem cells(P＜0.05,P＜0.01).(7)Compared to the model group,intraperitoneal and intravenous administration of adipose-derived mesenchymal stem cells significantly inhibited the mRNA expression of MuRF1 and Atrogin-1 genes(P＜0.01,P＜0.01,P＜0.01,P＜0.01).The results indicated that adipose-derived mesenchymal stem cells and their exosomes promoted recovery and growth of atrophic myotube cells by inhibiting the expression of muscle atrophy-related genes,and both intraperitoneal and intravenous administration of adipose-derived mesenchymal stem cells provided good therapeutic effects on sarcopenia in mice.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.