BACKGROUND:Plate fixation is the mainstream method for the surgical treatment of distal femoral fractures.The intramedullary nailing has the advantages of minimally invasive,such as less soft tissue injury and bone blood supply destruction.At the same time,it is a central fixation and has better biomechanical effect.Therefore,retrograde intramedullary nailing has become another option for the internal fixation of distal femoral fractures.OBJECTIVE:The biomechanical characteristics of new retrograde intramedullary nail on lateral femur condyle,common femoral retrograde intramedullary nail,and lateral femur condyle anatomical locking plate for the treatment of A2-type distal femoral fractures were compared using finite element analysis,and the advantages of new retrograde intramedullary nail on lateral femur condyle was studied.METHODS:A new retrograde intramedullary nail on lateral femur condyle was designed,which was inserted into the bone cortex in front of the insertion point of the lateral collateral ligament of the lateral femoral condyle.A CT scan was performed on the lower limb bone of a male volunteer,and a three-dimensional model of the femur was established.The model was then segmented to create a three-dimensional model of a femoral distal A2-type fracture,The three-dimensional models of small(small group),standard type retrograde intramedullary nail on the lateral femoral condyle(standard group),common retrograde intramedullary needle(common group),and lateral femur condyle anatomical locking plate(plate group)were established respectively.The axial stresses of 600,1 800 N and the torsional load of 4 000,8 000 N·mm were applied to the models,and the displacement and stress of femur and the displacement,stress and shear force of internal fixators were observed in each group.RESULTS AND CONCLUSION:(1)When subjected to axial load of 600 and 1 800 N,the femoral peak displacement,the femoral peak stress,and the peak stress of interal fixation in the standard group were the lowest among the four groups.(2)When subjected to torsional load of 4 000 and 8 000 N·mm,the femoral peak displacement and peak displacement of the internal fixation in the standard group were the lowest among the four groups.(3)Compared with femoral lateral condylar locking plate and common retrograde intramedullary needle,the new retrograde intramedullary needle on lateral femur condyle has mechanical advantages of reducing stress concentration and decreasing the risk of internal fixation failure.

OBJECTIVE:Patients with osteoporotic vertebral compression fractures still have residual back pain after vertebral augmentation.The current research is characterized by limited sample size,complex confounding factors,and inconsistent research results.To gain a deeper understanding of this phenomenon,the aim of this study was to identify and evaluate the risk factors for residual back pain after surgery through a systematic review and meta-analysis.METHODS:A comprehensive search was conducted in CNKI,VIP,WanFang,CBMdisc,PubMed,The Cochrane Library,Embase,and Web of Science for case-control studies on residual back pain after vertebral body augmentation for osteoporotic vertebral compression fractures from database inception to July 2024.The search terms were a combination of subject terms and free terms.The basic information,patient characteristics,surgical-related indicators,and risk factors for surgical back pain of the included studies were extracted.After evaluating the bias risk of all included studies,a meta-analysis was conducted using Stata 14.0 software on the relevant indicators.RESULTS:(1)21 case-control studies with a total of 8 043 patients were included.Among them,965 patients developed back pain.The quality score of all 21 studies was ≥7.(2)The meta-analysis results showed that age(WMD=0.98,95％CI:0.40-1.56,P=0.010),bone mineral density(WMD=-0.28,95％CI:-0.34 to-0.21,P=0.000),the number of vertebral fractures(OR=3.50,95％CI:2.65-4.62,P=0.000),thoracolumbar fracture index(OR=3.65,95％CI:2.61-5.11,P=0.000),cement volume(OR=6.89,95％CI:2.62-18.17,P=0.000),and cement distribution(OR=2.38,95％CI:1.93-2.93,P=0.000)were risk factors for the development of back pain after vertebral body augmentation in patients with osteoporotic vertebral compression fractures.CONCLUSION:Current evidence indicates that age,bone mineral density,the number of vertebral fractures,thoracolumbar fracture index,bone cement injection volume,and the distribution of bone cement are risk factors for low back pain.Specifically,bone mineral density,the number of vertebral fractures,thoracolumbar fracture index,and non-uniform distribution of bone cement are identified as independent risk factors for low back pain.Patients exhibiting these high-risk factors require vigilant monitoring and prompt intervention to mitigate the occurrence of clinical low back pain,thereby enhancing patient outcomes and quality of life.

BACKGROUND:The prevalence of osteoporosis is high in postmenopausal women,but muscle mass,grip strength,and how these factors affect osteoporosis are understudied,and the exact link between them has not been clarified.OBJECTIVE:To investigate the correlation between muscle mass,grip strength,appendicular skeletal muscle index and bone mineral density in postmenopausal women with osteoporosis and to assess the potential values of these indices in predicting and diagnosing postmenopausal osteoporosis.METHODS:Eighty-three postmenopausal women were collected from the outpatient clinic of the Third Affiliated Hospital of Guangzhou University of Chinese Medicine from February 2023 to January 2024.General data were collected.Bone mineral density was detected.T-value,muscle mass of each part,grip strength were recorded.The body mass index and appendicular skeletal muscle index were calculated.The patients were categorized into non-osteoporosis group(n=17)and postmenopausal osteoporosis group(n=66)according to T value and fracture history,and were statistically analyzed accordingly.RESULTS AND CONCLUSION:(1)The body mass,body mass index,bone mineral density of the overall lumbar spine,muscle mass and appendicular skeletal muscle index were higher in the non-osteoporosis group than the osteoporosis group(P＜0.05).(2)Muscle mass was positively correlated with bone mineral density of the overall lumbar spine and individual vertebrae(P＜0.05).(3)Multiple stepwise linear regression analysis showed that body mass and grip strength were linearly and positively correlated with muscle mass;body height and muscle mass were linearly and positively correlated with grip strength,and body mass was linearly and negatively correlated with grip strength.Body mass index was linearly and positively correlated with bone mineral density,and age was linearly and negatively correlated with bone mineral density.(4)Analysis by receiver operating characteristic curve showed that:muscle mass(the area under the curve,sensitivity,specificity and critical value of muscle mass were 0.744,76.50％,74.20％and 36.50 kg,respectively,with P=0.002)and appendicular skeletal muscle index(the area under the curve,sensitivity,specificity and critical value of appendicular skeletal muscle index were 0.739,82.40％,62.10％and 5.81 kg/m2,respectively,and P=0.002)had good predictive value for postmenopausal osteoporosis.To conclude,a reduction in muscle mass and appendicular skeletal muscle index can help to predict the risk of postmenopausal osteoporosis,and the possibility of osteoporosis should be taken into account in postmenopausal women when muscle mass is＜36.50 kg or appendicular skeletal muscle index is＜5.81 kg/m2,in order to prevent the occurrence of postmenopausal osteoporosis.

BACKGROUND:Rheumatoid arthritis is widely prevalent worldwide,with its high incidence and universality that considerably affects patients' quality of life.Previous studies have focused on a few immune cells or cytokines,whereas this study comprehensively provides a more complete view of the immune mechanisms in rheumatoid arthritis.OBJECTIVE:To explore the causal relationship between 731 immune cell phenotypes and rheumatoid arthritis using the Mendelian randomization method,thereby providing evidence of causality.METHODS:The 731 immune cell phenotypes used in this study were sourced from the GWAScatalog database,jointly developed by the National Human Genome Research Institute(NHGRI)and the European Bioinformatics Institute(EBI).The rheumatoid arthritis data were from the Finngen database,developed by the Finnish Institute for Molecular Medicine(FIMM).The inverse variance weighting method was employed as the primary analytical approach.Additionally,multiple analytical methods,including MR-Egger,weighted mode,simple mode,and weighted median,were concurrently utilized to complement the final results.Sensitivity analyses(Cochran's Q test,MR-Egger regression,and MR-presso analysis)were also conducted to verify the stability and feasibility of the data.RESULTS AND CONCLUSION:(1)After excluding results through heterogeneity testing,the inverse variance weighting analysis indicated that 10 absolute cell counts,15 median fluorescence intensities of surface antigen levels,1 morphological characteristic,and 9 relative cell counts had a causal relationship with the occurrence of rheumatoid arthritis.(2)According to cell classification,this study found that seven types of B cells,seven types of classical dendritic cells,six types of mature T cells,four types of monocytes,three types of myeloid cells,three types of TBNK cells(lymphocyte subset T cells,B cells and natural killer cells),and five types of Tregs had a causal association with the occurrence of rheumatoid arthritis.(3)Through comprehensive bidirectional two-sample MR analysis,we demonstrated the complex causal relationships between multiple immune phenotypes and rheumatoid arthritis,highlighting the intricate interaction patterns between the immune system and rheumatoid arthritis.These results provide new biomarkers for the early screening and diagnosis of rheumatoid arthritis in China,and help to improve the diagnostic accuracy and sensitivity.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

BACKGROUND:Patellar tendonitis can present as tendon degeneration that fails to heal due to tissue overload and incomplete recovery.Patellar tendonitis is a predisposition to high jumping and its pathogenesis has not been clearly defined.OBJECTIVE:To explore the stress-strain relationship of patellar tendon in the take-off technique of high jump through the finite element model with accurate human anatomical structure,so as to provide ideas for the prevention and rehabilitation of patellar tendinitis.METHODS:Based on the CT and MRI imaging data of the lower extremity(including the knee and ankle)of one subject(22 years old,183 cm height,70 kg body mass),a three-dimensional finite element model of the lower extremity was reconstructed using medical imaging software,reverse engineering software and modeling software.The plantar pressure of the take-off leg was collected in eight subjects by gait testing system,and the technical action of high jump take-off was collected by motion capture system.The captured data were imported into human sports biomechanics software for analysis,and kinematic and kinetic data were obtained as the boundary conditions of finite element model for finite element simulation analysis.RESULTS AND CONCLUSION:The force borne by the patellar tendon reached 3.29 times of its own body mass when the subjects took off.In the take-off stage,the peak values of normal equivalent stress,strain and shear stress of the patellar tendon were 127.76 MPa,0.81 and 37.69 MPa,respectively,which were in the nonlinear region of the stress-strain curve,and the peak values were distributed in the proximal and posterior parts of patellar tendon.To conclude,the high patellar tendon force,strain and shear stress caused by the load of 3.29 times its own body mass during take-off are related to the induction of patellar tendinitis.

BACKGROUND:During diabetic wound healing,the sustained activation of M1 macrophages exacerbates the inflammatory response and hinders wound repair.Auranofin,an anti-inflammatory drug,has not been clearly studied for its effects on M1 macrophages and its potential role in diabetic wound healing.OBJECTIVE:To investigate the effects of different concentrations of auranofin on the biological function of M1 macrophages and evaluate its potential application in diabetic wound healing.METHODS:RAW264.7 and THP-1 cells were used as research models.M1 polarization was induced using different concentrations of interferon-γ and lipopolysaccharide.M1 macrophages were treated with 1 and 2 μmol/L auranofin.Cell counting kit-8 assay was used to evaluate the effect of auranofin on cell viability.Quantitative real-time PCR was performed to detect mRNA expression of interleukin-1β,interleukin-6,and tumor necrosis factor-α.ELISA was employed to measure the levels of interleukin-1β,interleukin-6,and tumor necrosis factor-α in the supernatant.Western blot analysis was used to assess the expression of nuclear factor-κB(p65),phosphorylated mitogen-activated protein kinases(MAPK),and total MAPK proteins.Additionally,6-8-week-old male C57BL/6J and db/db diabetic mice were used for wound healing experiments,with the mice divided into C57 control,db/db control and auranofin treatment groups,each containing six animals.Dorsal skin defect modeling and treatment with intraperitoneal injection of auranofin were performed to observe wound healing in mice.RESULTS AND CONCLUSION:(1)Cell experiments showed that co-treatment with interferon-y(10 ng/mL)and lipopolysaccharide(100 ng/mL)significantly induced M1 polarization in RAW264.7 and THP-1 cells,resulting in increased mRNA expression of interleukin-1β,interleukin-6,and tumor necrosis factor-α.Treatment with auranofin(1 and 2 μmol/L)reduced the mRNA expression of these inflammatory factors in the cells and inhibited the secretion of inflammatory factors in the cell supernatant.(2)Auranofin treatment significantly suppressed the activation of nuclear factor-κB(p65)and phosphorylated MAPK signaling pathways.(3)Animal experiments showed that auranofin promoted wound healing in db/db diabetic mice,suggesting that auranofin has strong anti-inflammatory effects and may facilitate the healing of wounds in diabetic mice.

BACKGROUND:β-Caryophyllene has a variety of pharmacological activities such as antioxidant,anti-inflammatory and anti-apoptotic,which may have a better therapeutic effect on osteoarthritis.OBJECTIVE:To investigate the effect and mechanism of β-caryophyllene on mouse osteoarthritis.METHODS:Forty C57BL/6J mice were randomly divided into sham group,model group,low-dose β-caryophyllene group and high-dose β-caryophyllene group,with 10 mice in each group.Hulth method was used to construct an osteoarthritis model in the latter three groups.Four weeks after modeling,70 and 140 mg/kg/d β-caryophyllene was intragastrically given in the low-and high-dose β-caryophyllene groups,respectively,and normal saline was given by gavage in the sham group and the model group,once a day,for 4 weeks.After administration,knee joint morphological changes were observed by hematoxylin-eosin staining,serum levels of inflammatory factors(tumor necrosis factor-α,interleukin-1β,interleukin-6,and interleukin-10)were detected by ELISA,and oxidative stress indexes(glutathione peroxidase,superoxide dismutase,and malondialdehyde)were detected by chemiluminescence.The expression levels of key proteins in the Sonic hedgehog(Shh)/glioma associated oncogene homolog 1(Gli1)signaling pathway were detected by immunohistochemistry and western blot.RESULTS AND CONCLUSION:(1)Compared with the sham group,a large number of inflammatory cells infiltrated in the knee joint of mice in the model group,cartilage tissue was seriously damaged,serum levels of tumor necrosis factor-α,interleukin-1β,interleukin-6,interleukin-10 and malondialdehyde were significantly increased(P＜0.01),the activities of glutathione peroxidase and superoxide dismutase were significantly decreased(P＜0.01),and the relative expression levels of Shh and Gli1 in the knee joint were significantly increased(P＜0.01).(2)Compared with the model group,in the low-and high-dose β-caryophyllene groups,inflammatory cell infiltration in the mouse knee joint was decreased,cartilage tissue injury was alleviated,serum levels of tumor necrosis factor-α,interleukin-1 β,interleukin-6 and malondialdehyde were significantly decreased(P＜0.05),the activities of glutathione peroxidase and superoxide dismutase were significantly increased(P＜0.01),and the expression levels of Shh and Gli1 in the knee joint were significantly decreased(P＜0.01).The above-mentioned improvements were more significant in the high-dose β-caryophyllene group than the low-dose β-caryophyllene group.To conclude,β-caryophyllene can improve osteoarthritis,and its mechanism may be related to reducing inflammation and oxidative stress damage by regulating the Shh/Gli1 signaling pathway.

BACKGROUND:Studies have confirmed that Pterocarya hupehensis skan total flavonoids(PHSTF)can improve the level of collagen-induced arthritis in rats,but there is still a lack of research on the regulation of Wnt/β-catenin signaling pathway in fibroblast-like synoviocytes and its effect on related cell functions.OBJECTIVE:To investigate the effect and mechanism of PHSTF on lipopolysaccharide-induced proliferation,migration and apoptosis of fibroblast-like synoviocytes based on the Wnt/β-catenin signaling pathwayMETHODS:Fibroblast-like synoviocytes were divided into control group,lipopolysaccharide group,lipopolysaccharide+low-,medium-,and high-dose PHSTF groups(10,20,and 40 μg/mL),lipopolysaccharide+Wnt pathway inhibitor DKK1 group,and lipopolysaccharide+Wnt pathway inhibitor DKK1+high-dose PHSTF group(40 μg/mL).The cell counting kit-8 method was used to detect the effect of PHSTF on the viability of fibroblast-like synoviocytes,and the final drug concentration and time were screened.Flow cytometry was used to detect the apoptosis of fibroblast-like synoviocytes.Cell scratch assay,EDU staining and cell cloning assay were used to detect the migration and proliferation of fibroblast-like synoviocytes.Western blot assay was used to detect the protein expression levels of Wnt3a,β-catenin,tumorigenic genes,matrix metalloproteinase 2,matrix metalloproteinase 9,Bax and Bcl-2 in fibroblast-like synoviocytes.RESULTS AND CONCLUSION:(1)Compared with the control group,the cell viability decreased significantly when the concentration of PHSTF was＞40 μg/mL(P＜0.01).Therefore,the drug concentration of≤40 μg/mL was selected for subsequent experiments.(2)Compared with the lipopolysaccharide group,the wound healing rate,cell clone formation rate and the number of EDU-positive cells in the low-,medium-and high-dose PHSTF groups were significantly reduced,while the apoptosis rate was significantly increased(P＜0.05-0.01).(3)Western blot results showed that compared with the lipopolysaccharide group,low-,medium-and high-dose PHSTF significantly inhibited cellular Wnt3a,β-catenin,cellular tumorigenic genes,matrix metalloproteinase 2,matrix metalloproteinase 9,and Bcl-2 protein expression,and promoted the expression of Bax protein(P＜0.01).(4)Compared with the DKK1 group,the combination of DKK1 and high-dose PHSTF significantly inhibited the protein expression of Wnt3a,β-catenin,matrix metalloproteinase 2,matrix metalloproteinase 9 and Bcl-2 protein expression and promoted the protein expression of Bax(P＜0.01).To conclude,PHSTF may inhibit the proliferation and migration of fibroblast-like synoviocytes and promote apoptosis by inhibiting the Wnt/β-catenin signaling pathway.

BACKGROUND:Plate fixation is the mainstream method for the surgical treatment of distal femoral fractures.The intramedullary nailing has the advantages of minimally invasive,such as less soft tissue injury and bone blood supply destruction.At the same time,it is a central fixation and has better biomechanical effect.Therefore,retrograde intramedullary nailing has become another option for the internal fixation of distal femoral fractures.OBJECTIVE:The biomechanical characteristics of new retrograde intramedullary nail on lateral femur condyle,common femoral retrograde intramedullary nail,and lateral femur condyle anatomical locking plate for the treatment of A2-type distal femoral fractures were compared using finite element analysis,and the advantages of new retrograde intramedullary nail on lateral femur condyle was studied.METHODS:A new retrograde intramedullary nail on lateral femur condyle was designed,which was inserted into the bone cortex in front of the insertion point of the lateral collateral ligament of the lateral femoral condyle.A CT scan was performed on the lower limb bone of a male volunteer,and a three-dimensional model of the femur was established.The model was then segmented to create a three-dimensional model of a femoral distal A2-type fracture,The three-dimensional models of small(small group),standard type retrograde intramedullary nail on the lateral femoral condyle(standard group),common retrograde intramedullary needle(common group),and lateral femur condyle anatomical locking plate(plate group)were established respectively.The axial stresses of 600,1 800 N and the torsional load of 4 000,8 000 N·mm were applied to the models,and the displacement and stress of femur and the displacement,stress and shear force of internal fixators were observed in each group.RESULTS AND CONCLUSION:(1)When subjected to axial load of 600 and 1 800 N,the femoral peak displacement,the femoral peak stress,and the peak stress of interal fixation in the standard group were the lowest among the four groups.(2)When subjected to torsional load of 4 000 and 8 000 N·mm,the femoral peak displacement and peak displacement of the internal fixation in the standard group were the lowest among the four groups.(3)Compared with femoral lateral condylar locking plate and common retrograde intramedullary needle,the new retrograde intramedullary needle on lateral femur condyle has mechanical advantages of reducing stress concentration and decreasing the risk of internal fixation failure.