Insufficient alveolar bone thickness increases the risk of periodontal dehiscence and fenestration, especially in orthodontic tooth movement. Abaloparatide (ABL), a synthetic analog of human PTHrP (1-34) and a clinical medication for treating osteoporosis, has recently demonstrated its potential in enhancing craniofacial bone formation. Herein, we show that intraoral submucosal injection of ABL, when combined with mechanical force, promotes in situ alveolar bone thickening. The newly formed bone is primarily located outside the original compact bone, implying its origin from the periosteum. RNA sequencing of the alveolar bone tissue revealed that the focal adhesion (FA) pathway potentially mediates this bioprocess. Local injection of ABL alone enhances cell proliferation, collagen synthesis, and phosphorylation of focal adhesion kinase (FAK) in the alveolar periosteum; when ABL is combined with mechanical force, the FAK expression is upregulated, in line with the accomplishment of the ossification. In vitro, ABL enhances proliferation, migration, and FAK phosphorylation in periosteal stem cells. Furthermore, the pro-osteogenic effects of ABL on alveolar bone are entirely blocked when FAK activity is inhibited by a specific inhibitor. In summary, abaloparatide combined with mechanical force promotes alveolar bone formation via FAK-mediated periosteal osteogenesis. Thus, we have introduced a promising therapeutic approach for drug-induced in situ alveolar bone augmentation, which may prevent or repair the detrimental periodontal dehiscence, holding significant potential in dentistry.
Osteogenesis/drug effects* ; Periosteum/cytology* ; Parathyroid Hormone-Related Protein/administration & dosage* ; Animals ; Focal Adhesion Protein-Tyrosine Kinases/metabolism* ; Alveolar Process/drug effects* ; Cell Proliferation/drug effects* ; Phosphorylation ; Rats ; Male ; Humans ; Focal Adhesion Kinase 1/metabolism* ; Cell Movement/drug effects*

Alveolar bone reconstruction simulation is an effective means for quantifying orthodontics, but currently, it is not possible to directly obtain human alveolar bone material models for simulation. This study introduces a prediction method for the equivalent shear modulus of three-dimensional random porous materials, integrating the first-order Ogden hyperelastic model to construct a computed tomography (CT) based porous hyperelastic Ogden model (CT-PHO) for human alveolar bone. Model parameters are derived by combining results from micro-CT, nanoindentation experiments, and uniaxial compression tests. Compared to previous predictive models, the CT-PHO model shows a lower root mean square error (RMSE) under all bone density conditions. Simulation results using the CT-PHO model parameters in uniaxial compression experiments demonstrate more accurate prediction of the mechanical behavior of alveolar bone under compression. Further prediction and validation with different individual human alveolar bone samples yield accurate results, confirming the generality of the CT-PHO model. The study suggests that the CT-PHO model proposed in this paper can estimate the material properties of human alveolar bone and may eventually be used for bone reconstruction simulations to guide clinical treatment.
Humans ; Tomography, X-Ray Computed/methods* ; Porosity ; Alveolar Process/physiology* ; Bone Density ; Computer Simulation ; Elasticity ; X-Ray Microtomography ; Stress, Mechanical ; Finite Element Analysis ; Models, Biological

OBJECTIVES: This study explores the differences in fluid flow within alveolar cancellous bone at various sites under orthodontic forces and elucidates the relationship between fluid shear stress and bone remodeling. These fin-dings lay the groundwork for understanding the biomechanical mechanisms of orthodontic tooth movement. METHODS: Stress relaxation tests were performed on human alveolar bone samples to determine material parameters by using the Prony series. An inverse model of alveolar bone was then developed for numerical simulations of fluid-structure interactions to calculate fluid flow within cancellous bone. Meanwhile, a rat model of tooth movement was established to investigate variations in bone remodeling speeds across different regions. RESULTS: The microstructural distribution of cancellous alveolar bone was similar in humans and rats. The bone volume fraction and trabecular thickness gradually decreased from root cervical region to root apical region, while the trabecular space gradually increased. Under the influence of orthodontic forces, fluid shear stress within cancellous bone showed spatial variability across different levels, with the highest shear stress occurring at the root apical region, ranging from 0 to 0.936 6 Pa. Additionally, the rat model of tooth movement indicated that bone remodeling occurred more rapidly at the root apical region. CONCLUSIONS Fluid stimulation has a remarkable effect on al-veolar bone remodeling, causing changes in the structure of alveolar bone and ultimately regulating the speed of structu-ral remodeling.
Bone Remodeling ; Animals ; Tooth Movement Techniques ; Rats ; Alveolar Process/physiology* ; Stress, Mechanical ; Humans ; Biomechanical Phenomena ; Cancellous Bone/physiology* ; Shear Strength

OBJECTIVES: To evaluate the osteogenic efficacy of three-dimensional printing individualized titanium mesh (3D-PITM) as a scaffold material in guided bone regeneration (GBR). METHODS: 1) Patients undergoing GBR for alveolar bone defects were enrolled as study subjects, and postoperative healing complications were recorded. 2) Postoperative cone beam computed tomography (CBCT) scans acquired at least 6 months post-surgery were used to calculate the percentage of actual bone formation volume. 3) Alveolar bone specimens were collected during the first-stage implant surgery for histomorphometric analysis. This analysis quantitatively measured the proportions of newly formed bone and newly formed unmineralized bone within the specimens. Specimens were categorized into three groups based on healing complications (good healing group, wound dehiscence group, 3D-PITM exposure group) to compare differences in the proportions of newly formed bone and newly formed unmineralized bone. RESULTS: 1) Twelve patients were included. Guided bone regeneration failed in one patient, and 3D-PITM exposure occurred in three patients (exposure rate: 25%). 2) The mean percentage of actual bone formation volume in the 11 successful guided bone regeneration cases was 95.23%±28.85%. 3) Histomorphometric analysis revealed that newly formed bone constituted 40.35% of the alveolar bone specimens, with newly formed unmineralized bone accounting for 13.84% of the newly formed bone. Intergroup comparisons showed no statistically significant differences (P>0.05) in the proportions of newly formed bone or newly formed unmineralized bone between the good healing group and the wound dehiscence group or the 3D-PITM exposure group. CONCLUSIONS 3D-PITM enables effective bone augmentation. Radiographic assessment demonstrated favorable bone formation volume, while histological analysis confirmed substantial formation of newly formed mineralized bone within the surgical site.
Humans ; Printing, Three-Dimensional ; Titanium ; Cone-Beam Computed Tomography ; Bone Regeneration ; Osteogenesis ; Surgical Mesh ; Tissue Scaffolds ; Alveolar Process/surgery* ; Adult ; Male ; Middle Aged ; Female ; Wound Healing ; Guided Tissue Regeneration, Periodontal/methods* ; Alveolar Bone Loss/surgery*

OBJECTIVES: To compare the clinical effects of concentrated growth factor (CGF) membrane and Bio-Gide ^® collagen membrane, combined with Bio-Oss ^® sticky bone respectively in alveolar ridge preservation (ARP) of maxillary anterior teeth. METHODS: Thirty patients who needed alveolar ridge preservation after maxillary anterior tooth extraction were selected and randomly assigned to the Bio-Gide group and the CGF group. In both groups, the extraction sockets were tightly filled with the Bio-Oss^® sticky bone. In the Bio-Gide group used Bio-Gide^® collagen membrane to cover the upper edge of the Bio-Oss^® sticky bone and closed the wound. The CGF group, the CGF membrane was covered on the upper edge of the Bio-Oss^® sticky bone and the wound was closed. The soft tissue wound healing status at 10 days after ARP, the changes in alveolar ridge height and width immediately after ARP and at 6 months after ARP, and the doctor-patient satisfaction at 6 months after ARP were compared and evaluated between the two groups. RESULTS: At 6 months after ARP, there was no statistically significant difference in the changes of alveolar bone width and height between the two groups (P>0.05). However, the CGF group showed better performance in soft tissue healing after ARP and doctor-patient satisfaction, and the differences were statistically significant (P<0.05). CONCLUSIONS Compared with the Bio-Gide^® collagen membrane, the combined application of CGF membrane and Bio-Oss^® sticky bone can lead to better soft tissue healing after ARP of maxillary anterior teeth and higher doctor-patient satisfaction, showing obvious advantages in ARP of maxillary anterior teeth.
Humans ; Maxilla/surgery* ; Tooth Extraction ; Alveolar Process/surgery* ; Membranes, Artificial ; Alveolar Ridge Augmentation/methods* ; Intercellular Signaling Peptides and Proteins/therapeutic use* ; Minerals/therapeutic use* ; Collagen ; Wound Healing ; Tooth Socket/surgery* ; Bone Substitutes/therapeutic use* ; Male ; Female ; Middle Aged ; Alveolar Bone Loss/prevention & control* ; Adult

OBJECTIVES: This study aimed to investigate the feasibility of measuring the soft tissue height of bone cristae around implant by digital method. METHODS: A total of 36 patients with dental implants were selected from the Dental Medicine Center of the First Affiliated Hospital of University of Science and Technology of China (Anhui Provincial Hospital) from August 2022 to December 2022. A total of 43 dental implants were enrolled. All postoperative cone beam CT (CBCT) imaging data and intraoral digital impressions obtained before surgery were immediately obtained by the patients on the day of completion of oral implant surgery and they were imported into oral implant surgery planning software for image fitting. Then, virtual implants of the same specification were placed in the planting area, and the implant position was adjusted to overlap with the implant shadow in the CBCT image. Supracrestal tissue height (STH) was measured at the implant view interface (digital group). During the operation, implant holes were prepared step by step in accordance with the standard preparation method, and implants were implanted. The upper edge of the implant was flushed with the crest of the alveolar ridge. STH was measured by perio-dontal probing (periodontal probe group). Paired t-test was used to compare the STH differences between the digital and periodontal probe groups. Bland-Altman test was used to analyze the consistency of the two methods. Intra-group correlation coefficient (ICC) was used to verify the reliability of the results measured by different surveyors using di-gital methods. RESULTS: No statistical significance was observed in the STH difference between the two methods (P>0.05). Bland-Altman test showed good consistency between the two methods, but the measurement of mandibular posterior teeth showed that the results of periodontal probe were greater than those of digital method. The ICC and 95%CI of the STH results measured digitally by different surveyors are 0.992 (0.986-0.996). CONCLUSIONS The digital me-thod is in good agreement with the periodontal probe method in measuring the soft tissue height of the bone cristae around the implant.
Humans ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography/methods* ; Dental Implants ; Feasibility Studies ; Reproducibility of Results ; Tooth/diagnostic imaging*

Objective: To measure the labial gingival thickness and bone lamella thickness in the maxillary anterior area using digital method, and to analyze the correlation between the two, so as to provide a reference for esthetic restoration and implantation treatment of the upper anterior area. Methods: Fifty-seven patients [23 males, 34 females, (25.8±4.5) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to October 2020. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. The image data was fitted and registered by the 3Shape software. The gingival thickness at 2 mm below the gingival margin, bone thickness and gingival thickness at 2 and, 4 mm below the crest of the labial alveolar crest in maxillary central incisors, lateral incisors and canines, were measured. Results: The gingival thickness at 2 mm below the gingival margin of maxillary central incisors, lateral incisors and canines was (1.42±0.21), (1.19±0.17) and (1.23±0.20) mm respectively (F=12.47, P<0.001). The gingival thickness at 2 mm below gingival margin and 4 mm below crest of residual ridge in the male patients were (1.31±0.21) and (0.67±0.22) mm, and those in the female patients were (1.26±0.22) and (0.58±0.19) mm respectively, and there were statistically significant differences in the gingival thickness between the "2 mm below gingival margin" group and the "4 mm below crest of residual ridge" group (t=2.01 and 3.97, P<0.05). There was a positive correlation between gingival thickness and alveolar bone thickness at 2 mm and 4 mm below the crest of residual ridge in maxillary anterior region, and the correlation coefficients (r) were 0.387 and 0.344 respectively (P<0.05). Conclusions: Gingival thickness of maxillary anterior area is related to the tooth position and gender. The gingival thickness of men is greater than that of women.The gingival thickness at 2 and 4 mm below the crest of the alveolar crest is positively correlated with the thickness of the alveolar bone.
Adult ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography ; Esthetics, Dental ; Female ; Gingiva/diagnostic imaging* ; Humans ; Incisor/diagnostic imaging* ; Male ; Maxilla/diagnostic imaging* ; Young Adult

OBJECTIVES: To explore the relationship between the height of alveolar bone resorption and sex and age in the adolescent dentition. METHODS: Multi-slice computed tomography (MSCT) was used to measure the height of alveolar bone resorption at labial, lingual, mesial and distal sites of teeth in 149 adolescents aged from 10 to 20 years. SPSS 25.0 software was used to analyze the relationship between the height of alveolar bone resorption and sex and age. RESULTS: There was no significant difference in the height of alveolar bone resorption between sex (P>0.05). The height of alveolar bone resorption was positively correlated with age in all types of teeth. The model constructed by combining the alveolar bone resorption height data of four sites (y=2.569x₁+3.106x₂+4.108x₃+1.451x₄-0.082, R²_max=0.756)had a better ability to infer age than that of combining two sites (y=5.942x₁+4.489x₂+0.612, R²_max=0.706) and a single site (R²_max=0.638). CONCLUSIONS The height of alveolar bone resorption is positively correlated with the age of adolescents. The combination of four sites has a stronger ability to infer the relationship between the height of alveolar bone resorption and age in adolescents and has higher accuracy in practical application.
Humans ; Adolescent ; Child ; Young Adult ; Adult ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography ; Bone Resorption/diagnostic imaging* ; Tomography, X-Ray Computed

OBJECTIVE: To measure the distance from cemento-enamel junction (CEJ) to alveolar crest (AC) of labial side of anterior teeth on skeletal Angle class III patients under direct vision during periodontal bone augmentation surgery and to make relevant analysis to find the relevant factors. METHODS: In the study, 46 skeletal Angle class III patients (10 males and 36 females) received periodontal bone augmentation surgery of anterior teeth were included, with 67 jaws (27 maxillae and 40 mandibles) and 400 anterior teeth (161 maxillary anterior teeth and 239 mandibular anterior teeth). The mean age was 23.65 years. Maxillary anterior teeth consisted of 54 central incisors, 53 lateral incisors and 54 canines. Mandibular anterior teeth consisted of 79 central incisors, 80 lateral incisors and 80 canines. CEJ-AC was measured in three sites (mesial sites, central sites and distal sites) by Williams periodontal probes during periodontal bone augmentation surgery under direct vision by the same researcher. RESULTS: The average CEJ-AC of 400 anterior teeth was (2.21±1.48) mm. The average CEJ-AC of maxillary anterior teeth was (1.72±1.13) mm, more than (2.54±1.60) mm of mandibular anterior teeth (P<0.05). The average CEJ-AC of canines was (2.42±1.78) mm, more than (2.06±1.27) mm of central incisors or (2.16±1.32) mm of lateral incisors (P<0.05). The average CEJ-AC of central sites was (3.04±2.01) mm, more than (1.79±0.86) mm of mesial sites or (1.81±0.89) mm of distal sites (P<0.05). CEJ-AC of 233 anterior teeth was more than 2 mm, accounting for 58.25%, and 117 anterior teeth with dehiscence were found, accounting for 29.25%. Multilevel and multivariate Logistic regression showed age, jaw, tooth and site were the relevant factors to the position of alveolar crest. CONCLUSION The position of alveolar crest of skeletal Angle class III patients who received periodontal bone augmentation surgery was lower than that of the general population, causing periodontal risks during decompensation orthodontics therapy before orthognathic surgery. The position of alveolar crest was lower in older patients than in younger patients, in mandibular teeth than in maxillary teeth, in canines than in central incisors or lateral incisors, and in central sites than in mesial sites or distal sites of labial side, which showed much higher risk.
Alveolar Process ; Cone-Beam Computed Tomography ; Female ; Humans ; Male ; Malocclusion, Angle Class III ; Mandible ; Maxilla ; Young Adult

OBJECTIVE: To observe and investigate the effect of vertical soft tissue thickness on the peri-implant tissue condition and the prevalence of peri-implant disease in patients with history of periodontitis. METHODS: Among 210 patients who showed initial interest of implant therapy, 92 patients were included in this study and received implant surgery during 2010 and 2015. Sixty-six patients with 66 implants finally came back for T2 evaluation. Prior to the implant therapy, all the patients had received periodontal treatment. During the implant placement surgery, the distance from palatal soft tissue edge to the alveolar crest, which was defined as vertical soft tissue thickness (VT), was measured after the buccal full thickness flap was elevated. According to the cut off point which was adopted from the operating characteristic curve, 66 implants within 66 patients were divided into two groups, which were called normal group (VT≤4.5 mm) and thick group (VT>4.5 mm), respectively. Information of the patient's general status, periodontal situation and implant information were recorded. After a follow-up period of 42.9 months, the parameters of peri-implant tissue and condition of peri-implant disease were recorded. Mann-Whitney U test as well as Chi-square test were used to compare the parameters between two groups. Moreover, Kaplan-Meier method was chosen to draw the event(peri-implantitis)-free survival curve. RESULTS: The survival rate of the implants was 100%. At the end of the follow-up examination(T2), the parameters including max PDi, mean PDi, max BIi, mean BIi, mean MBL, MBL at distal side, MBL at mesial side, mean PLIi presented significantly higher values in thick group than in normal group (P < 0.05). Moreover, the prevalence of peri-implantitis and peri-implant disease (peri-implant mucositis & peri-implantitis) in thick group was respectively 34.8% and 73.9%, which was significantly higher than 2.3% and 48.8% respectively in normal group (P<0.05). The prevalence of peri-implant mucositis did not show significant difference in the two groups. In addition, Kaplan-Meier analysis showed that there was significant difference between the event-free survivals of the two groups. CONCLUSION The vertical soft tissue thickness around implants in patients with periodontitis has a significant effect on the health of the peri-implant tissue. Excessive vertical soft tissue thickness may result in deeper peri-implant probing depth as well as more peri-implant marginal bone loss, and eventually increase the risk of peri-implant disease. The vertical remodeling of soft tissue may be a new direction to indicate the role of periodontitis in peri-implant tissue condition. Moreover, the biological mechanism of the association between soft tissue thickness and peri-implantitis risk as well as effective approaches to prevent the adverse effect of excessive soft tissue thickness on peri-implant tissue is necessary to be investigated.
Alveolar Bone Loss ; Alveolar Process ; Dental Implants ; Humans ; Mucositis ; Peri-Implantitis ; Periodontitis ; Tooth