BACKGROUND: It is inaccurate to reflect the level of dust exposure through working years. Furthermore, identifying a predictive indicator for lung function decline is significant for coal miners. The study aimed to explored whether club cell secretory protein (CC16) levels can reflect early lung function changes. METHODS: The cumulative respiratory dust exposure (CDE) levels of 1,461 coal miners were retrospectively assessed by constructed a job-exposure matrix to replace working years. Important factors affecting lung function and CC16 were selected by establishing random forest models. Subsequently, the potential of CC16 to reflect lung injury was explored from multiple perspectives. First, restricted cubic spline (RCS) models were used to compare the trends of changes in lung function indicators and plasma CC16 levels after dust exposure. Then mediating analysis was performed to investigate the role of CC16 in the association between dust exposure and lung function decline. Finally, the association between baseline CC16 levels and follow-up lung function was explored. RESULTS: The median CDE were 35.13 mg/m³-years. RCS models revealed a rapid decline in forced vital capacity (FVC), forced expiratory volume in the first second (FEV₁), and their percentages of predicted values when CDE exceeded 25 mg/m³-years. The dust exposure level (<5 mg/m³-years) causing significant changes in CC16 was much lower than the level (25 mg/m³-years) that caused changes in lung function indicators. CC16 mediated 11.1% to 26.0% of dust-related lung function decline. Additionally, workers with low baseline CC16 levels experienced greater reductions in lung function in the future. CONCLUSIONS CC16 levels are more sensitive than lung indicators in reflecting early lung function injury and plays mediating role in lung function decline induced by dust exposure. Low baseline CC16 levels predict poor future lung function.
Uteroglobin/blood* ; Humans ; Dust/analysis* ; Occupational Exposure/analysis* ; Male ; Middle Aged ; Adult ; Retrospective Studies ; Lung Injury/chemically induced* ; Coal Mining ; Biomarkers/blood* ; China/epidemiology* ; Air Pollutants, Occupational ; Female

Objective: To establish a high performance liquid chromatography method for the determination of misoprostol in workplace air. Methods: From February to August 2021, the misoprostol in the workplace air was collected by glass fiber filter membrane, and theeluent was separated by C18 liquid chromatography column, determined by UV detector, and quantified by external standard method. Results: The quantitative lower limit of misoprostol determination method was 0.05 μg/ml, and the lowest quantitative concentration was 1.4 μg/m(3) (calculated by collecting 75 L air sample). The concentration of misoprostol has a good linear relationship between 0.05 to 10.00 μg/ml. The relative coefficient was 0.9998. The regression equation of the standard working curve was y=495759x-45257. The range of average recovery rates were from 95.5% to 102.8%. The intra-assay precision of the method was 1.2%-4.6%, and the inter-assay precision was 2.0%-5.9%. The samples could be stored stably for 7 days at 4 ℃. Conclusion: The high performance liquid chromatography method for the determination of misoprostol has high sensitivity, good specificity and simple procedure of sample pretreatment. It is suitable for the detection of misoprostol in the workplace air.
Chromatography, High Pressure Liquid/methods* ; Misoprostol/analysis* ; Air Pollutants, Occupational/analysis* ; Workplace ; Chromatography, Liquid

Welding operations are widely present in the manufacturing production process, involving a large number of occupational groups, and are the key occupations where work injuries and occupational diseases occur in China. For different welding processes and welding materials, the content and focus of occupational health monitoring are different. At present, the item of occupational health examination in welding operation is in poor consistency with the on-site exposure of occupational hazard factors, and it is mainly concentrated in the stage of disease development, which can not reflect the early health damage caused by welding dust exposure in time. The emergence of biomarkers of welding dust can make up for this defect. Therefore, it is of great significance to describe the current situation of occupational health monitoring of welding dust and summarize the research progress of related biomarkers for the early prevention of diseases caused by welding dust and the practice of occupational health monitoring.
Occupational Health ; Welding ; Occupational Exposure/analysis* ; Dust/analysis* ; Biomarkers ; Air Pollutants, Occupational/analysis*

Objective: To analyze the level of PCDD/Fs exposure of occupational workers in the waste incineration industry and explore the risk of occupational exposure. Methods: In September 2021, literature on environmental PCDD/Fs exposure in waste incineration plants published from the establishment of the database to February 10, 2021 was retrieved from CNKI database. A total of 1365 literatures were retrieved, and 7 met the criteria for inclusion. The US Environmental Protection Agency (EPA) inhalation risk model was used to assess and analyze carcinogenic and non-carcinogenic risks of PCDD/Fs exposure among occupational workers in the waste incineration industry. Results: A total of 86 sampling sites were included in incineration plants in 7 regions. The study of Wuhan area showed that the concentration of working environment near the waste incinerator in the same factory was the highest, followed by the rest and office area in the factory. The concentration of PCDD/Fs in waste incinerators was the highest in Southwest China (4880.00-24880.00 pg TEQ/m(3)), and the lowest in Shenzhen (0.02-0.44 pg TEQ/m(3)). According to the cancer risk assessment, with the increase of exposure years, the risk of cancer increased. The highest risk of cancer was found in the waste incineration plants in Southwest China. When the exposure period was 1 year, the risk was moderate (22.40×10(-6)-114.20×10(-6)). When the exposure time was more than 5 years, the risk of cancer was high. In Jinan, workers working near the incinerator had a moderate risk of cancer after five years of exposure. In Zhejiang, workers were at medium risk of cancer after exposure for more than 20 years. Workers in Wuhan, Shanghai, Zhejiang Province, Shenzhen and the Pearl River Delta were still at low risk of cancer after 40 years of occupational exposure. HQ>1 of workers working near the waste incinerators in Jinan, Zhejiang Province and Southwest China, and the qualitative evaluation results showed that the non-carcinogenic risk was unacceptable. Conclusion: There are great differences in PCDD/Fs of occupational exposure in waste incineration industry, and the occupational exposure exceeding the occupational exposure limit has higher carcinogenic and non carcinogenic risks.
Humans ; Dibenzofurans ; Polychlorinated Dibenzodioxins/analysis* ; Air Pollutants/analysis* ; Incineration ; Dibenzofurans, Polychlorinated/analysis* ; China/epidemiology* ; Benzofurans ; Occupational Exposure/analysis* ; Carcinogens ; Risk Assessment ; Neoplasms ; Environmental Monitoring/methods*

Objective: To explore the changes of γ-GCS mRNA expression and GSH-PX in serum of workers exposed to manganese in order to provide scientific basis for early diagnosis of manganese poisoning. Methods: In June 2017, a total of 180 workers from a motorcycle manufacturer were selected by stratified random sampling, including 115 welders as the exposure group and 65 administrative office workers as the Control Group, the exposure group was divided into high exposure group (43 persons) and low exposure group (72 persons) according to whether the exposure group exceeded the standard limit. The levels of γ-gcs Mrna expression and GSH-Px activity in serum were determined by Occupational Health Survey, and the differences of γ-gcs Mrna expression and GSH-Px activity among different groups were analyzed. Results: Compared with the control group, the serum GSH-Px activity was lower and the serum γ-GCS mRNA expression level was higher in the exposed group (F=370.52, 275.95, P<0.01) . Compared with the control group, there was significant difference in γ-GCS mRNA expression level and GSH-Px activity (F=0.475、1.06, P<0.01; F=48.53、111.70, P<0.01) . The concentrations of manganese in air, welding dust and urine were positively correlated with the level of γ-GCS mRNA (r=0.71, 0.50, 0.31, P<0.01) The serum GSH-Px activity was negatively correlated with the concentrations of manganese in air, welding dust and urine (r=-0.80, -0.52, -0.30, P< 0.01) , There was no correlation between Serum γ-GSH-Px activity and age and years of exposure (P>0.05) . Conclusion: Serum γ-GCS mRNA expression level and GSH-Px activity level can be used as early biomarkers of manganese poisoning. The concentrations of manganese in workplace air, welding dust and urine manganese in workers are the influencing factors.
Air Pollutants, Occupational ; Dust ; Humans ; Ions ; Manganese ; Manganese Poisoning ; Occupational Exposure/analysis* ; RNA, Messenger/genetics* ; Welding

Objective: To analyze the post distribution of dust concentration in ferrous metal foundry enterprises and evaluate the occupational health risks, and provide basis for policies of the formulation of pneumoconiosis prevention and control. Methods: From August to September in 2020, the basic information, dust hazard information and occupational health management information of 59 ferrous metal casting enterprises were investigated, the dust concentration distribution was analyzed, and the risk assessment was carried out by using the quantitative assignment model. The dust concentration is tested by LSD method after logarithmic treatment. The 3 times time weighted average allowable exposure concentration of dust is taken as the peak concentration limit of dust; The time weighted average allowable exposure concentration of dust converted by exposure time is taken as the time weighted average exposure concentration limit of dust, and whether the time weighted average exposure concentration and peak concentration of dust at the same post exceed the limit is taken as the basis for exceeding the limit of dust post concentration to calculate the post exceeding the limit rate. Results: The dust hazards were mainly distributed in the posts of sand treatment, molding, sand falling, sand cleaning and cutting and grinding. Dust exposure time weighted average concentration was 0.44 (0.03, 5.11) mg/m(3), peak exposure concentration was 1.30 (0.18, 10.94) mg/m(3), and the over standard rate of Posts was 38.92% (79/203) . Weighted average exposure concentration of other dust (total dust) in the cutting and grinding post is 1.50 (0.15, 7.40) mg/m(3), peak exposure concentration is 0.90 (0.07, 12.48) mg/m(3), and the post exceedance rate is 4.88% (2/41) . Weighted average exposure concentration of silica dust (exhaling dust) in dust operation posts of investment casting enterprises is 0.43 (0.05, 6.35) mg/m(3), peak exposure concentration is 0.90 (0.12, 8.28) mg/m(3), and the post over standard rate is 35.77% (49/137) ; Weighted average exposure concentration of other dust (total dust) at the cutting and grinding post is 2.00 (11.00, 21.00) mg/m(3), and the post exceedance rate is 2.50% (2/80) . There was no significant difference in the concentration of respirable dust between sand casting and investment casting (P>0.05) . The concentration of respirable dust in sand casting was higher than that in sand treatment, molding and sand cleaning posts (P<0.05) . The concentration of silica dust in investment casting was higher than that in sand treatment and molding posts, and that in sand cleaning posts was higher than that in sand treatment posts (P<0.05) . 98.48% (454/461) of the dust operation posts have an occupational health risk value greater than or equal to 400, and 1.52% (7/461) of the dust operation posts have an occupational health risk value of 200~399. Conclusion: there is a high rate of exceeding the standard in the dust work posts in the ferrous metal foundry enterprises in Ningbo, and the workers have a high occupational health risk of pneumoconiosis or metal and its compound pneumoconiosis. Targeted measures should be taken to reduce the occupational health risk.
Air Pollutants, Occupational/analysis* ; Dust/analysis* ; Humans ; Occupational Exposure/analysis* ; Pneumoconiosis ; Sand ; Silicon Dioxide/analysis*

Objective: To establish a GDH-3 air sample tube for simultaneous determination of twelve kinds of chlorobenzene compounds (CBs) in workplace air by gas chromatography. And to established a matching determination method. Methods: In October 2020, the vapor and aerosol CBs in workplace air were collected by GDH-3 air sampling tube, and desorption and elution with 3.00 ml toluene for 15 min, then the solution separated by DB-23 capillary column, and finally detected with microcell electron capture detector. Results: The quantitative determination ranges of twelve isomers of CBs were 0.71×10(-3)-2000.00 mg/L, with the correlative coefficients were 0.99967-0.99998. The minimum detectable concentrations were 0.04-112.63 μg/m(3), and the minimum quantification concentrations were 0.14-375.42 μg/m(3) (15.00 L sample, 3.00 ml sample solution) . The average elution efficiencies were 96.00%-104.00%. The within-run relative standard deviations (RSDs) were 2.54%-6.12%, and the between-run RSDs were 3.85%-7.87%. Sealed samples could be stable at room temperature for at least 15 days. Conclusion: GDH-3 air sample tube can be used for simultaneous determination of twelve kinds of CBs in workplace air by gas chromatography. The established supporting measurement method meets the measurement requirements of the occupational health standard detection method, and the it's suitable for the simultaneous determination of 12 kinds of CBS in the air.
Air Pollutants, Occupational/analysis* ; Chlorobenzenes/analysis* ; Chromatography, Gas/methods* ; Research ; Workplace

Objective: To evaluate the occupational health risk of organic solvents in major posts of printing industry, and to provide technical reference to take targeted risk control measures. Methods: In January 2021, the contact ratio method was used to assess the occupational health risk of organic solvents in the major posts of 84 printing enterprises in Shantou, and Monte Carto method was used to estimate the probability distribution of risk levels in the majorpostsin January 2021. Results: The highest probability of risk assessment in printing and membranecovering post is Level 4 (high risk) , which are 76.2% and 67.6% respectively; the highest probability of simulation evaluation result in oil blending, dispensing and cleaning post is Level 3 (medium risk) ; and the simulation evaluation result in glueing post are mostly Level 3 (medium risk) and Level 4 (high risk) , the probability of which are 45.7% and 54.3% respectively. Conclusion: The occupational health risk of organic solvents in the major posts is generally middle-high risk level, and then the occupational health risk control of organic solvents in major posts of printing industry should be strengthened.
Air Pollutants, Occupational/analysis* ; Industry ; Occupational Exposure/analysis* ; Occupational Health ; Risk Assessment ; Solvents

Objective: To establish a method for the determination of acetylacetone in the air of workplace by gas chromatography. Methods: In August 2020, acetylacetone in the air of workplace was collected by silica gel tube, eluted with methanol, separated and detected by gas chromatography with flame ionization detector. The detection limit and precision of the method were also analyzed. Results: The linear range of acetylacetone was 1.95-1950.60 μg/ml with the regression equation of y=0.815x-3.667, and the correlation coefficient was 0.99993. The limit of detection of the method was 0.18 μg/ml and the minimum detection concentration was 0.12 mg/m(3) (collected sample volume was 1.50 L). The within-run precisions were 1.08%-4.11% and the between-run precisions were 1.98%-2.80%. The desorption rates were 99.68%-100.45%. The sealed samples could be kept at least 15 days at room temperature without significant loss. Conclusion: The solvent desorption-gas chromatography method for the determination of acetylacetone has good precision, high sensitivity and simple operation, and is suitable for the determination of acetylacetone in the air of the workplace.
Solvents ; Air Pollutants, Occupational/analysis* ; Chromatography, Gas/methods* ; Workplace

Objective: To establish a method for rapid detection of DB-WAX capillary column and determination of the workplace air in 30 kinds of volatile organic pollutants. Methods: In August 2020, N-pentane, n-hexane, methylcyclohexane, octane, Acetone, ethyl acetate, butanone, benzene, 3-pentanone, trichloroethylene, tetrachloroethylene, toluene, butyl acetate, 2-hexanone, Isoamyl acetate, ethylbenzene, p-xylene, m-xylene, amyl acetate, o-xylene, chlorobenzene, styrene, cyclohexanone, P-chlorotoluene, bromobenzene, M-dichlorobenzene, p-dichlorobenzene, O-dichlorobenzene, o-Chlorotoluene, 1, 2 , 4-trichlorobenzene of 30 kinds of substances in air were collected by activated carbon tube. After analysis by carbon disulfide, the analytical solution was analyzed by DB-WAX column and determined by FID detector. Results: The above 30 kinds of volatile organic pollutants had good separation effect, the correlation coefficient of the standard curve was above 0.999, the relative standard deviation was 0.1%-3.2%, the desorption efficiency was 77.0%-117.1% , the lower limit of quantitation was 0.33-5.33 μg/ml, and the lowest quantitation concentration was 0.22-3.55 mg/m(3), the recoveries ranged was 95.4%-104.9%. Conclusion: The method can effectively separate and accurately determine 30 volatile organic compounds in these workplaces, and the method is simple and quick.
Air Pollutants, Occupational/analysis* ; Benzene/analysis* ; Chromatography, Gas ; Volatile Organic Compounds/analysis* ; Workplace