ObjectiveTo investigate the effects of different fermentation methods and times on the fungal flora and chemical composition of Aurantii Fructus， in order to obtain the optimal fermentation conditions and flora structure， and to ensure the stability and controllability of the fermented varieties. MethodsScanning electron microscopy was used to observe and analyze the colony characteristics on the surface of Aurantii Fructus under different fermentation conditions. Internal transcribed spacer 2（ITS2） high-throughput sequencing， combined with fungal community diversity analysis and fungal community structure analysis， were used to obtain the fungal flora microbial categories of Aurantii Fructus under the conditions of traditional pressure-shelf fermentation and non-pressure-shelf natural fermentation for 7， 14， 21 d（numbered Y1-Y3 for the former， and numbered F1-F3 for the latter）， respectively. At the same time， the chemical components in the fermentation process were detected by ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS/MS）， combined with principal component analysis（PCA）， partial least squares-discriminant analysis（PLS-DA） and compound retention time， parent ions， characteristic fragment ions and other information， the differential compounds between the different fermentation samples were screened and identified. ResultsThe analysis of fungal community diversity showed that the dominant flora did not change at different fermentation time points in the traditional pressure-shelf fermentation method， while in the non-pressure-shelf natural fermentation method， there was a significant difference with the fermentation process， and at the genus level， the dominant genus of samples Y1， Y2， Y3 and F2 was Aspergillus， while the dominant genera of samples F1 and F3 were both Rhizopus. This indicated that the microbial growth environment provided by the traditional fermentation method was more stable， and the microbial community structure was more stable， which was more conducive to the stable and controllable fermentation process and fermented products. A total of 155 compounds were identified by compositional analysis， including 70 flavonoids， 38 coumarins， 10 alkaloids， 34 organic acids and 3 other compounds. After fermentation， two new components of ribalinine and pranferin were produced. Different fermentation conditions also brought about differences in chemical composition， multivariate statistical analysis obtained 26 differential compounds under two different fermentation methods， mainly including flavonoids， organic acids and coumarins. Comprehensively， the microbial community structure of samples fermented by the traditional pressure-shelf method of Aurantii Fructus for 14 d was stable， the species richness was high and the overall content of differential compounds was high， which was the optimal processing condition. ConclusionCompared with non-pressure-shelf natural fermentation， the traditional method has obvious advantages in terms of the stability of the microbial community structure and the content of chemical compounds， and the optimal condition is 14 days of fermentation. This study is helpful to promote the quality stability and fermentation bioavailability of fermented products of Aurantii Fructus， as well as to provide an experimental basis for the further improvement of the quality control methods of this variety.

ObjectiveTo investigate the effects of different fermentation methods and times on the fungal flora and chemical composition of Aurantii Fructus， in order to obtain the optimal fermentation conditions and flora structure， and to ensure the stability and controllability of the fermented varieties. MethodsScanning electron microscopy was used to observe and analyze the colony characteristics on the surface of Aurantii Fructus under different fermentation conditions. Internal transcribed spacer 2（ITS2） high-throughput sequencing， combined with fungal community diversity analysis and fungal community structure analysis， were used to obtain the fungal flora microbial categories of Aurantii Fructus under the conditions of traditional pressure-shelf fermentation and non-pressure-shelf natural fermentation for 7， 14， 21 d（numbered Y1-Y3 for the former， and numbered F1-F3 for the latter）， respectively. At the same time， the chemical components in the fermentation process were detected by ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS/MS）， combined with principal component analysis（PCA）， partial least squares-discriminant analysis（PLS-DA） and compound retention time， parent ions， characteristic fragment ions and other information， the differential compounds between the different fermentation samples were screened and identified. ResultsThe analysis of fungal community diversity showed that the dominant flora did not change at different fermentation time points in the traditional pressure-shelf fermentation method， while in the non-pressure-shelf natural fermentation method， there was a significant difference with the fermentation process， and at the genus level， the dominant genus of samples Y1， Y2， Y3 and F2 was Aspergillus， while the dominant genera of samples F1 and F3 were both Rhizopus. This indicated that the microbial growth environment provided by the traditional fermentation method was more stable， and the microbial community structure was more stable， which was more conducive to the stable and controllable fermentation process and fermented products. A total of 155 compounds were identified by compositional analysis， including 70 flavonoids， 38 coumarins， 10 alkaloids， 34 organic acids and 3 other compounds. After fermentation， two new components of ribalinine and pranferin were produced. Different fermentation conditions also brought about differences in chemical composition， multivariate statistical analysis obtained 26 differential compounds under two different fermentation methods， mainly including flavonoids， organic acids and coumarins. Comprehensively， the microbial community structure of samples fermented by the traditional pressure-shelf method of Aurantii Fructus for 14 d was stable， the species richness was high and the overall content of differential compounds was high， which was the optimal processing condition. ConclusionCompared with non-pressure-shelf natural fermentation， the traditional method has obvious advantages in terms of the stability of the microbial community structure and the content of chemical compounds， and the optimal condition is 14 days of fermentation. This study is helpful to promote the quality stability and fermentation bioavailability of fermented products of Aurantii Fructus， as well as to provide an experimental basis for the further improvement of the quality control methods of this variety.

Panax ginseng as a perennial herb of Araliaceae, exhibits pharmacological effects such as central nervous system stimulation, anti-tumor properties, and cardiovascular and cerebrovascular protection. The B3 gene family plays a crucial role in growth and development, antioxidant activity, stress resistance, and secondary metabolism regulation of plants and has been extensively studied in various plants. However, the identification and analysis of the B3 gene family in P. ginseng have not been reported. In this study, a total of 145 B3 genes(PgB3s) with complete open reading frames(ORF) were identified from P. ginseng and classified into five subfamilies based on domain types. Through correlation analysis with ginsenoside content, SNP/InDels analysis, and interaction analysis with key enzyme genes, 15 PgB3 transcripts were found to be significantly correlated with ginsenoside content and exhibited a close interaction network with key enzyme genes involved in ginsenoside biosynthesis, which indicated that these genes may participate in the regulation of ginsenoside biosynthesis. Additionally, this study found that PgB3 genes exhibited induced expression in response to methyl jasmonate(MeJA) stress, which aligned with the presence of abundant stress response elements in their promoters, confirming the important role of the B3 gene family in P. ginseng in stress resistance. The results of this study revealed the potential functions of PgB3 genes in ginsenoside biosynthesis and stress response, providing a significant theoretical basis for further research on the functions of PgB3 genes and their regulatory mechanisms.
Panax/metabolism* ; Gene Expression Regulation, Plant ; Plant Proteins/metabolism* ; Ginsenosides/biosynthesis* ; Multigene Family ; Phylogeny

OBJECTIVE: To evaluate the dynamic changes of glucocorticoid (GC) dose and the feasibility of GC discontinuation in rheumatoid arthritis (RA) patients under the background of Chinese medicine (CM). METHODS: This multicenter retrospective cohort study included 1,196 RA patients enrolled in the China Rheumatoid Arthritis Registry of Patients with Chinese Medicine (CERTAIN) from September 1, 2019 to December 4, 2023, who initiated GC therapy. Participants were divided into the Western medicine (WM) and integrative medicine (IM, combination of CM and WM) groups based on medication regimen. Follow-up was performed at least every 3 months to assess dynamic changes in GC dose. Changes in GC dose were analyzed by generalized estimator equation, the probability of GC discontinuation was assessed using Kaplan-Meier curve, and predictors of GC discontinuation were analyzed by Cox regression. Patients with <12 months of follow-up were excluded for the sensitivity analysis. RESULTS: Among 1,196 patients (85.4% female; median age 56.4 years), 880 (73.6%) received IM. Over a median 12-month follow-up, 34.3% (410 cases) discontinued GC, with significantly higher rates in the IM group (40.8% vs. 16.1% in WM; P<0.05). GC dose declined progressively, with IM patients demonstrating faster reductions (median 3.75 mg vs. 5.00 mg in WM at 12 months; P<0.05). Multivariate Cox analysis identified age <60 years [P<0.001, hazard ratios (HR)=2.142, 95% confidence interval (CI): 1.523-3.012], IM therapy (P=0.001, HR=2.175, 95% CI: 1.369-3.456), baseline GC dose ⩽7.5 mg (P=0.003, HR=1.637, 95% CI: 1.177-2.275), and absence of non-steroidal anti-inflammatory drugs use (P=0.001, HR=2.546, 95% CI: 1.432-4.527) as significant predictors of GC discontinuation. Sensitivity analysis (545 cases) confirmed these findings. CONCLUSIONS RA patients receiving CM face difficulties in following guideline-recommended GC discontinuation protocols. IM can promote GC discontinuation and is a promising strategy to reduce GC dependency in RA management. (Trial registration: ClinicalTrials.gov, No. NCT05219214).
Adult ; Aged ; Female ; Humans ; Male ; Middle Aged ; Arthritis, Rheumatoid/drug therapy* ; Glucocorticoids/therapeutic use* ; Medicine, Chinese Traditional ; Retrospective Studies

This study investigated the effect of different carrier materials on the in vitro properties of progesterone solid dispersions. The solid dispersions of the insoluble drug progesterone were prepared by hot melt extrusion technique using rheological properties as the index of investigation, and the in vitro properties of the solid dispersions were characterized. Scanning electron microscope revealed solid dispersions with rough surfaces and agglomerated microstructures into irregular lumpy particles. Differential scanning calorimetry and powder X-ray diffraction showed the change of progesterone crystalline form in solid dispersions from crystalline to amorphous state. In vitro dissolution studies showed that solid dispersions prepared with different carrier materials can effectively improve the dissolution rate of drugs. The results of the study showed that the type of carrier material had a significant effect on the in vitro properties of solid dispersions, providing a reference for the study of solid dispersions in the controlled release of insoluble drugs.

Needle-free injection technology (NFIT) refers to the drug delivery systems in which drugs are propelled as high-speed jet streams using any of the pressure source to penetrate the skin to the required depth. NFIT is a promising drug delivery system as it enables the injection of liquids, powders, and depot/projectiles, and has the advantages of preventing needle stick accidents, improving drug bioavailability, eliminating needle-phobia, increasing vaccine immunity, simplifying operations and is convenient for patients to use. NFIT and its research background, the structure and classification of needle-free jet injectors (NFJI), drugs that can be delivered using NFJI and the factors affecting the injection effect are comprehensively reviewed in this paper. The limitations and potential development directions are summarized to provide a theoretical basis for the application and development of NFIT.

DNA origami is a powerful technique for generating nanostructures with dynamic properties and intelligent controllability. The precise geometric shapes, high programmability, and excellent biocompatibility make DNA origami nanostructures an emerging drug delivery vehicle. The shape, size of the carrier material, as well as the loading and release of drugs are important factors affecting the bioavailability of drugs. This paper focuses on the controllable design of DNA origami nanostructures, efficient drug loading, and intelligent drug release. It summarizes the cutting-edge applications of DNA origami technology in biomedicine, and discusses areas where researchers can contribute to further advancing the clinical application of DNA origami carriers.

Orodispersible films (oral dispersible films), a novel form of oral solid dosage forms, are widely used for patients with dysphagia and those with uncontrollable autonomic behavior. In this study, suvorexant orodispersible film was prepared by hot melt extrusion technology, and the disintegration time, mechanical properties, in vitro dissolution and pharmacokinetics were evaluated, compared with other orodispersible films and commercially available tablets Belsomra. All experiments were approved by the Committee on the Management and Use of Laboratory Animals of Academy of Military Medical Sciences (IACUC-DWZX-2024-504). The results showed that the dissolution rate of suvorexant orodispersible film was faster and the mechanical strength was better than that of other commercially available orodispersible film, which could meet the needs of storage and transportation. Differential scanning calorimetry and X-ray diffraction results showed that suvorexant was dispersed within the orodispersible film in an amorphous state. The in vitro dissolution of the film was observed to be four times faster than that of the commercial tablets, achieving complete dissolution within five minutes. Pharmacokinetic evaluations in Beagle dogs revealed that the self-formulated orodispersible film exhibited no significant differences in the area under the blood concentration-time curve when compared with Belsomra. However, the film showed a faster onset of action, with a peak time that was twice as rapid, and a maximum blood concentration that was twice as high as that of Belsomra. Leveraging hot melt extrusion technology, the suvorexant orodispersible film offers a straightforward, continuous production process with consistent quality. It serves as an excellent platform for the development of solvent-free film preparations tailored for patients with special needs.

The rheological properties of drug and carrier materials have a wide range of guiding significance for the formulation and process development of solid dispersions. In this study, the rheological properties of materials with different drug carrier ratios were systematically studied with suvorexant as the model drug and copovidone as the carrier material, which provided a sufficient basis for determining the formulation and process of solid dispersions. The optimal suvorexant-copovidone ratio obtained by oscillating temperature scanning was 1∶4. If the ratio is greater than 1∶ 4, the glass transformation temperature of the material will increase significantly, and the solubilization effect of the solid dispersion will show a downward trend. The results of oscillation temperature scanning and oscillation temperature sweep can show that when the extrusion temperature is greater than 150 ℃, the viscosity of the material is less than 10 000 Pa·s, and the melt can be extruded smoothly, and the best extrusion temperature of 160-180 ℃ can be obtained by combining the dissolution results. Finally, the dissolution of suvorexant tablets guided by rheological property studies in multiple media is similar to that of the commercially available tablets Belsomra. Therefore, rheological studies can screen and optimize the formulation and process of suvorexant solid dispersions at the mechanism level, which is of great significance to improve the success rate of R&D and shorten the R&D cycle of solid dispersions prepared by hot melt extrusion.

Objective To investigate the relationship between single nucleotide polymorphisms(SNPs)in the eNOS gene and genetic susceptibility to systemic lupus erythematosus(SLE)in Hainan.Methods Blood samples were collected from SLE patients(SLE group,n=214)and healthy controls(control group,n=214)from January 2020 to December 2022 at the First Affiliated Hospital of Hainan Medical College and Hainan Provincial People's Hospital.The bases of eNOS gene rs3918188,rs1799983 and rs1007311 loci in each group were detected by SNaPshot sequencing technology.Logistic regression was used to analyze the correlation between genotypes,alleles and gene models(dominant model,recessive model,and overdominant model)of the above 3 target loci of the eNOS gene and genetic susceptibility to SLE.Haplotype analysis was conducted using HaploView 4.2 software to investigate the relationship between haploid and genetic susceptibility to SLE at each site.Results The results of logistic regression analysis revealed that the CC genotype and the C allele at rs3918188 locus were risk factors for genetic susceptibility to SLE(CC vs.AA:OR=2.449,P<0.05;C vs.A:OR=2.133,P<0.001).In recessive model at rs3918188 locus,CC genotype carriers had an increased risk of SLE development compared with AA+AC genotype carriers(OR=2.774,P<0.001).In contrast,in overdominant model at this locus,AC genotype carriers had a decreased risk of SLE occurrence compared with AA+CC genotype carriers(OR=0.385,P<0.001).In addition,polymorphisms of rs1799983 and rs1007311 were not associated with susceptibility to SLE in genotype,allele type and the 3 genetic models(P>0.05).Haplotype analysis revealed a strong linkage disequilibrium between the rs1007311 and rs1799983 loci of the eNOS gene,but no significant correlation was found between haplotype and genetic susceptibility to SLE(P>0.05).Conclusion The CC genotype and C allele at rs3918188 locus of eNOS gene may be risk factors for SLE in Hainan,while the risk of SLE occurrence is reduced in carriers of AC genotype under the overdominant model.