OBJECTIVE: To study the effect of gradient shear stress on platelet aggregation by microfluidic chip Technology. METHODS: Microfluidic chip was used to simulate 80% fixed stenotic microchannel, and the hydrodynamic behavior of the stenotic microchannel model was analyzed by the finite element analysis module of sollidwork software. Microfluidic chip was used to analyze the adhesion and aggregation behavior of platelets in patients with different diseases, and flow cytometry was used to detect expression of the platelet activation marker CD62p. Aspirin, Tirofiban and protocatechuic acid were used to treat the blood, and the adhesion and aggregation of platelets were observed by fluorescence microscope. RESULTS: The gradient fluid shear rate produced by the stenosis model of microfluidic chip could induce platelet aggregation, and the degree of platelet adhesion and aggregation increased with the increase of shear rate within a certain range of shear rate. The effect of platelet aggregation in patients with arterial thrombotic diseases were significantly higher than normal group (P<0.05), and the effect of platelet aggregation in patients with myelodysplastic disease was lower than normal group (P<0.05). CONCLUSION The microfluidic chip analysis technology can accurately analyze and evaluate the platelet adhesion and aggregation effects of various thrombotic diseases unde the environment of the shear rate, and is helpful for auxiliary diagnosis of clinical thrombotic diseases.
Humans ; Microfluidics ; Platelet Adhesiveness ; Platelet Aggregation ; Blood Platelets/metabolism* ; Platelet Aggregation Inhibitors/pharmacology* ; Platelet Activation/physiology* ; Thrombosis

OBJECTIVE: To explore the main factors of platelet spreading and provide the foundation for related research. METHODS: Platelets (2×10⁷/ml) were draw from C57BL/6J mouse and kept at 22 ℃ for 1-2 hours. Platelets (2×10⁷/ml) were were allowed to adhere and spread on the fibrinogen-coated slides, after staining F-actin in platelets, the platelets were observed with the confocal microscopy. The effects of different concentrations of fibrinogen (10 μg/ml, 30 μg/ml, 100 μg/ml) and kinds of agonists ［thrombin(0.01,0.05,0.1 U/ml), ADP（5,10,20 μmol/L）, U46619（0.125,0.25,0.5 μmol/L）］ on platelets were analyzed. The platelet spreading was successful if the spreading rate was higher after treated with agonists. RESULTS: Compared to the group which coated with 10 μg/ml and 100 μg/ml fibrinogen, the platelet density is optimal when coated with 30 μg/ml fibrinogen. In addition, under the stimulation of thrombin, ADP and U46619, the spreading rate of platelets showed a certain concentration-dependent increasing. CONCLUSION The platelet spreading is easily influenced by various factors, the platelet spreading can be induced successfully at 0.1 U/ml thrombin, 20 μmol/L ADP and 0.5 μmol/L U46619 on the slide coated with 30 μg/ml fibrinogen.
15-Hydroxy-11 alpha,9 alpha-(epoxymethano)prosta-5,13-dienoic Acid/pharmacology* ; Adenosine Diphosphate ; Animals ; Blood Platelets/physiology* ; Fibrinogen ; Humans ; Mice ; Mice, Inbred C57BL ; Platelet Adhesiveness/physiology* ; Thrombin/pharmacology*

Fibrinogen (Fg) in human plasma plays an important role in hemostasis, vascular repair and tissue integrity. The surface chemistry of extracellular matrix or biological materials affects the orientation and distribution of Fg, and changes the exposure of integrin binding sites, thereby affecting its adhesion function to platelets. Here, the quantity, morphology and side chain exposure of Fg adsorbed on hydrophilic, hydrophobic and avidin surfaces were measured by atomic force microscopy (AFM) and flow cytometry (FCM), then the rolling behavior of platelets on Fg was observed through a parallel plate flow chamber system. Our results show that the hydrophobic surface leads to a large amount of cross-linking and aggregation of Fg, while the hydrophilic surface reduces the adsorption and accumulation of Fg while causing the exposure and spreading of the α chain on Fg and further mediating the adhesion of platelets. Fg immobilized by avidin / biotin on hydrophilic surface can maintain the monomer state, avoid over exposure and stretching of α chain, and bind to the platelets activated by the A1 domain of von Willebrand factor instead of inactivated platelets. This study would be helpful for improving the blood compatibility of implant biomaterials and reasonable experimental design of coagulation
Adsorption ; Blood Platelets ; Fibrinogen ; Humans ; Platelet Adhesiveness ; von Willebrand Factor

A diblock copolymer, poly(ethylene glycol) methacrylate-block-glycidyl methacrylate (PEGMA-GMA), was prepared on glass substrate by surface-initiated atom transfer radical polymerization (SI-ATRP), and endothelial specific peptide Arg-Glu-Asp-Val (REDV) was immobilized at the end of the PEGMA-GMA polymer brush by ring opening reaction through the rich epoxy groups in the GMA. The structure and hydrophilicity of the polymer brushes were characterized by static water contact angle, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The results showed that the REDV modified copolymer brushes were successfully constructed on the glass substrates. The REDV peptide immobilized onto surface was quantitatively characterized by ultraviolet-visible spectroscopy (UV-VIS). The blood compatibility of the coating was characterized by recalcification time and platelet adhesion assay. The results showed that the polymer coating had good blood compatibility. The multifunctional active polymer coating with PEGMA and peptide produced an excellent prospect in surface construction with endothelial cells selectivity.
Biocompatible Materials ; Cells, Cultured ; Endothelial Cells ; Glass ; Humans ; Immobilized Proteins ; Methacrylates ; Oligopeptides ; Platelet Adhesiveness ; Polyethylene Glycols ; Polymers ; Surface Properties

PURPOSE: The purpose of this study was to assess the adhesiveness and cytotoxicity of 3, 4-dihydroxyphenylalanine (DOPA), and to evaluate the role of collagen membrane with DOPA in the guided bone regeneration. MATERIALS AND METHODS: Peel resistance and cell cytotoxicity test were performed. Four defect types in nine rabbit calvaria were randomly allocated: i) control, ii) membrane, iii) deproteinized porcine bone mineral (DPBM) covered by membrane with DOPA, and iv) DPBM covered by membrane with cyanoacrylate. Animals were sacrificed at 2 (n=4) and 8 weeks (n=5) for microcomputed tomography and histomorphometric analysis. DOPA showed low peel resistance but high cell viability. RESULT: Cyanoacrylate and DOPA groups showed significantly higher mineralized tissue volume (MTV) compared to control and membrane groups at 2 weeks (P < 0.05). At 8 weeks, DOPA group showed the highest MTV. Significantly higher new bone area was found in DOPA group at 8 weeks (P < 0.05). Bone formation increased from 2 to 8 weeks in DOPA group (P < 0.05). CONCLUSION: DOPA showed high cell viability and in vivo study revealed predictable performance in bone regeneration.
Adhesiveness ; Adhesives ; Animals ; Bone Regeneration ; Cell Survival ; Collagen ; Cyanoacrylates ; Dihydroxyphenylalanine ; Membranes ; Miners ; Osteogenesis ; Skull ; X-Ray Microtomography

Adhesiveness ; Gastrointestinal Hemorrhage ; prevention & control ; surgery ; Hand ; Humans ; Surgical Instruments ; Surgical Procedures, Operative ; methods

OBJECTIVETo study the effect of interaction of the talin rod domain integrin binding site 2 with integrin β3 on platelet signal transduction.

METHODSA peptide that mimics the membrane proximal α helix 6 residues R724 KEFAK729 of the integrin β3 cytoplasmic tails was designed and synthesized, to which the myristoylation was covalently linked to the N-terminal of the peptide enabling membrane penetration. The effects of myr-RKEFAK peptide on the typical platelet outside-in signaling ovent (stable adhesion and spreading on immobilized fibrinogen, aggregation, fibrin clot retraction) and inside-out signaling events (soluble fibrinogen binding) were tested.

RESULTSmyr-RKEFAK peptide dose-dependently inhibited platelet stable adhesion and spreading on immobilized fibrinogen, irreversible aggregation, as well as fibrin clot retraction, but not soluble fibrinogen binding and reversible phase of platelet aggregation.

CONCLUSIONThe cell-penetrating peptide myr-RKEFAK causes an inhibitory effect on integrin β3 outside-in signaling-regulated platelets functions, but did not affect inside-out signaling-regulated platelets functions.

The possibility of polyoxymethylene (POM) as heart valve leaflet material was investigated by comparing the hemocompatibility with that of 316L stainless steel and low-temperature isotropic pyrolytic carbon (LTIC). Surface hydrophobicity was characterized by water contact angle measurement. Platelet adhesion, APTT/PT/TT and hemolysis rate tests were applied for evaluating hemocompatibility. The results showed that POM was hydrophobic and had a low hemolytic rate, adhesion amount and activation degree of platelets on POM surface were less than 316L stainless steel, and was similar to LTIC. This research pointed out potential application of POM as heart valve leaflets.
Biocompatible Materials ; chemistry ; Blood Platelets ; Carbon ; chemistry ; Heart Valve Prosthesis ; Heart Valves ; Humans ; Platelet Adhesiveness ; Resins, Synthetic ; chemistry ; Stainless Steel ; chemistry

The purpose of this study is to explore the feasibility of wheat germ agglutinin (WGA) modified liposome as a vehicle for ophthalmic administration. Liposome loaded with 5-carboxyfluorescein (FAM) was prepared by lipid film hydration method. WGA was thiolated and then conjugated to the surface of the liposome via polyethylene glycol linker to constitute the WGA-modified and FAM-loaded liposome (WGA-LS/FAM). The amount of thiol groups on each WGA molecule was determined, and the bioactivity of WGA was estimated after it was modified to the surface of liposome. The physical and chemical features of the WGA-modified liposome were characterized and the ocular bioadhesive performance was evaluated in rats. The result showed that each thiolated WGA molecule was conjugated with 1.32 thiol groups. WGA-LS/FAM had a mean size of (97.40 +/- 1.39) nm, with a polydispersity index of 0.23 +/- 0.01. The entrapment efficacy of FAM was about (2.95 +/- 0.21)%, and only 4% of FAM leaked out of the liposome in 24 h. Erythrocyte agglutination test indicated that after modification WGA preserved the binding activity to glycoprotein. The in vivo ocular elimination of WGA-LS/FAM fitted first-order kinetics, and the elimination rate was significantly slower than that of the unmodified liposome, demonstrating WGA-modified liposome is bioadhesive and suitable for ophthalmic administration.
Absorption, Physicochemical ; Adhesiveness ; Administration, Ophthalmic ; Animals ; Drug Carriers ; Eye ; metabolism ; Fluoresceins ; chemistry ; Liposomes ; administration & dosage ; chemistry ; pharmacokinetics ; Male ; Particle Size ; Polyethylene Glycols ; chemistry ; Rats ; Rats, Sprague-Dawley ; Wheat Germ Agglutinins ; administration & dosage ; chemistry ; pharmacokinetics

The purpose of this study was to determine the optimal composite recipe of rice muffin using three different amounts of Chinese artichoke (Stachys sieboldii MIQ) powder, brown sugar, and egg. Response surface methodology (RSM) was used to obtain 16 experimental points (including three replicates of Chinese artichoke powder, brown sugar, and egg), and the Chinese artichoke rice muffin formulation was optimized using rheology. The results of the sensory evaluation showed very significant values for color, texture, sweetness, and overall quality (P<0.05). The results of the color, texture, and chemical analyses showed significant values for crumb redness (P<0.01), crumb yellowness (P<0.05), crust redness (P<0.05), crust yellowness (P<0.001), crust lightness (P<0.05), adhesiveness (P<0.01), springiness (P<0.001), gumminess (P<0.01), cohesiveness (P<0.05), moisture content (P<0.05), and sweetness (P<0.05). As a result, optimum formulations obtained by numerical and graphical methods were found to be 8.28 g of Chinese artichoke powder, 66.20 g of brown sugar, 111.72 g of sticky rice powder, 30 g of rice powder, and 59.37 g of egg.
Adhesiveness ; Asian Continental Ancestry Group* ; Cynara scolymus* ; Humans ; Ovum ; Rheology