OBJECTIVE: To investigate the effectiveness of posterior minimally invasive approach in the treatment of posterior wall acetabular fractures. METHODS: The clinical data of 17 patients with posterior wall acetabular fractures treated with posterior minimally invasive approach between March 2019 and June 2023 were retrospectively analyzed. There were 14 males and 3 females with an average age of 41 years ranging from 28 to 57 years. The causes of injury were traffic accident in 12 cases and falling from height in 5 cases. There were 3 cases complicated with posterior hip dislocation and 2 cases complicated with sciatic nerve injury. According to AO/Orthopaedic Trauma Association (AO/OTA) classification, there were 11 cases of type A1.1 and 6 cases of type A1.2. The time from injury to operation was 5-8 days, with an average of 6.2 days. The incision length, intraoperative blood loss, and operation time were recorded. The quality of posterior wall fracture reduction were evaluated by Matta criteria, and hip function were evaluated by modified Merle d'Aubign-Postel score criteria at 6 months after operation and last follow-up. RESULTS: The operation was successfully completed in 17 cases. The length of incision ranged from 7 to 9 cm, with an average of 8.3 cm, and all incisions healed by first intention. The intraoperative blood loss ranged from 200 to 350 mL, with an average of 281 mL. The operation time ranged from 45 to 70 minutes, with an average of 57 minutes. Two patients had sciatic nerve injury before operation, and the sciatic nerve function recovered completely at 3 months after operation; the other 15 patients had no symptoms of sciatic nerve injury after operation. All the 17 patients were followed up 14-27 months, with an average of 19.5 months. At 1 week after operation, according to the Matta criteria, anatomical reduction was achieved in 12 cases and satisfactory reduction in 5 cases, with a satisfaction rate of 100%. According to the modified Merle d'Aubign-Postel scoring system, the hip function score was 13-18 (mean, 16.1) at 6 months after operation. Among them, 5 cases were excellent, 9 were good, and 3 were fair, with an excellent and good rate of 82.4%. At last follow-up, the hip function score was 7-18 (mean, 13.7), of which 3 cases were excellent, 9 were good, 3 were fair, and 2 were poor, with an excellent and good rate of 70.6%. During the follow-up, there was no infection, failure of internal fixation, and femoral head necrosis, and heterotopic ossification occurred in 2 cases. CONCLUSION The posterior minimally invasive approach has the advantages of less trauma, shorter operation time, less blood loss, without cutting off the external rotator muscle. Exposure through the gluteus medius-piriformis space and piriformis-supercilium space can provide sufficient safe exposure for the posterior wall acetabulum fracture, which is a reliable alternative approach for the posterior acetabular fracture.
Humans ; Acetabulum/surgery* ; Male ; Female ; Adult ; Middle Aged ; Minimally Invasive Surgical Procedures/methods* ; Retrospective Studies ; Fracture Fixation, Internal/instrumentation* ; Fractures, Bone/diagnostic imaging* ; Treatment Outcome ; Operative Time

OBJECTIVE: To evaluate precise assessment methods for predicting the optimal acetabular cup size in total hip arthroplasty (THA). METHODS: A clinical data of 73 patients (80 hips) who underwent primary THA between December 2022 and July 2024 and met the inclusion criteria was analyzed. There were 39 males and 34 females with an average age of 66.3 years (range, 56-78 years). Among them, 66 cases were unilateral THA and 7 were bilateral THAs. There were 29 patients (34 hips) of osteoarthritis, 35 patients (35 hips) of femoral neck fractures, and 9 patients (11 hips) of osteonecrosis of the femoral head. Based on anteroposterior pelvic X-ray films, three methods were employed to predict acetabular cup size, including preoperative template planning, radiographic femoral head diameter (FHD) measurement, and intraoperative FHD measurement. The predicted acetabular cup sizes from these methods were compared with the actual implanted sizes. RESULTS: The predicted acetabular cup sizes using the preoperative template planning, radiographic FHD measurement, and intraoperative FHD measurement were (51.25±2.81), (49.72±3.11), and (49.90±2.74) mm, respectively, compared to the actual implanted cup size of (50.57±2.74) mm, with no significant difference ( P>0.05). Regarding agreement with the actual implanted cup size, the preoperative template planning achieved exact matches in 35 hips (43.75%), one-size deviation in 41 hips (51.25%), and two-size deviations in 4 hips (5%); the radiographic FHD measurement achieved exact matches in 12 hips (15%), one-size deviation in 57 hips (71.25%), and two-size deviations in 11 hips (13.75%); and the intraoperative FHD measurement achieved exact matches in 26 hips (32.5%), one-size deviation in 52 hips (65%), and two-size deviations in 2 hips (2.5%). There were significant differences in agreement distributions between the three methods and the actual implanted cup sizes ( H=18.579, P<0.001). CONCLUSION The intraoperative FHD measurement, as a simple, cost-effective, and accurate method, effectively guides acetabular cup selection, reduces the risk of prosthesis wear, enhances postoperative joint stability.
Humans ; Arthroplasty, Replacement, Hip/instrumentation* ; Male ; Female ; Middle Aged ; Acetabulum/diagnostic imaging* ; Aged ; Hip Prosthesis ; Prosthesis Design ; Femur Head/surgery* ; Osteoarthritis, Hip/surgery* ; Radiography ; Femoral Neck Fractures/surgery* ; Femur Head Necrosis/surgery*

OBJECTIVE: To evaluate the feasibility and short-term effectiveness of three-dimensional (3D)-printed customized porous acetabular components for reconstruction of extensive acetabular bone defects during primary total hip arthroplasty (THA). METHODS: The clinical data of 8 patients with extensive acetabular bone defects, who were treated with 3D-printed individualized porous acetabular components between July 2018 and January 2022, were retrospectively analyzed. The cohort comprised 4 males and 4 females with an average age of 48 years ranging from 34 to 56 years. Acetabular bone defects were classified as Paprosky type ⅢA in 3 cases and type ⅢB in 5 cases. The causes of acetabular destruction were hip tuberculosis (5 cases), pigmented villonodular synovitis (2 cases), and syphilitic arthritis (1 case). Visual analogue scale (VAS) score and Harris hip score (HHS) were used to evaluate the pain relief and hip function before and after operation. Reconstruction outcomes were further assessed by imaging results [X-ray film and Tomosynthesis Shimadzumetal artefact reduction technology (T-SMART)], and the mechanical properties were evaluated by finite element analysis. RESULTS: The operation time ranged from 174 to 195 minutes (mean, 187 minutes), and intraoperative blood loss ranged from 390 to 530 mL (mean, 465 mL). All 8 patients were follow-up 26-74 months (mean, 44 months). Among the 5 patients with tuberculosis, none experienced postoperative recurrence. At last follow-up, the VAS score was 0.3±0.5 and the HHS score was 87.9±3.7, both significantly improved compared to preoperative values ( t=25.170, P<0.001; t=-28.322, P<0.001). X-ray films at 2 years after operation demonstrated satisfactory matching between the 3D-printed customized acetabular component and the acetabulum. The postoperative center of rotation of the operated hip was shifted by (2.1±0.5) mm horizontally and (2.0±0.7) mm vertically relative to the contralateral side, with both offsets showing significant differences compared to preoperative values ( t=24.700, P<0.001; t=55.230, P<0.001). T-SMART imaging showed satisfactory osseointegration at the implant-host bone interface. No complications such as aseptic loosening or screw breakage was observed during follow-up. Finite element analysis showed that the acetabular component had good mechanical properties. CONCLUSION The application of 3D-printed individualized porous acetabular components in the reconstruction of extensive acetabular bone defects demonstrated precise anatomical reconstruction, stable mechanical support, and good functional performance in short-term follow-up, offering a potential alternative for acetabular defect reconstruction in primary THA.
Humans ; Middle Aged ; Male ; Female ; Printing, Three-Dimensional ; Arthroplasty, Replacement, Hip/instrumentation* ; Acetabulum/diagnostic imaging* ; Adult ; Follow-Up Studies ; Retrospective Studies ; Hip Prosthesis ; Prosthesis Design ; Porosity ; Treatment Outcome ; Plastic Surgery Procedures/methods*

Acetabulum ; abnormalities ; diagnostic imaging ; Adolescent ; Adult ; Cartilage ; abnormalities ; Female ; Hip Dislocation, Congenital ; diagnosis ; surgery ; Hip Joint ; abnormalities ; surgery ; Humans ; Ligaments ; abnormalities ; Male ; Orthopedic Procedures ; Young Adult

Rotational acetabular osteotomy (RAO) is a well-established surgical procedure for patients with acetabular dysplasia, and excellent long-term results have been reported. However, RAO is technically demanding and precise execution of this procedure requires experience with this surgery. The usefulness of computer navigation in RAO includes its ability to perform three-dimensional (3D) preoperative planning, enable safe osteotomy even with a poor visual field, reduce exposure to radiation from intraoperative fluoroscopy, and display the tip position of the chisel in real time, which is educationally useful as it allows staff other than the operator to follow the progress of the surgery. In our results comparing 23 hips that underwent RAO with navigation and 23 hips operated on without navigation, no significant difference in radiological assessment was observed. However, no perioperative complications were observed in the navigation group whereas one case of transient femoral nerve palsy was observed in non-navigation group. A more accurate and safer RAO can be performed using 3D preoperative planning and intraoperative assistance with a computed tomography-based navigation system.
Acetabulum/diagnostic imaging/*surgery ; Adult ; Female ; Hip Dislocation/diagnostic imaging/*surgery ; Humans ; Imaging, Three-Dimensional ; Male ; Osteotomy/*methods ; Surgery, Computer-Assisted/*methods ; Tomography, X-Ray Computed ; Young Adult

BACKGROUNDPorous-coated cups have been widely used in acetabular reconstruction after failed treatment of acetabular fractures, and good results have been reported with the use of these cups; however, the durability and functionality of modular trabecular metal (TM) acetabular components in acetabular reconstruction after failed treatment of acetabular fractures remain unclear. This study aimed to examine the radiographic and clinical outcomes associated with the use of modular TM acetabular components for failed treatment of acetabular fractures to assess the durability and functionality of these components in acetabular reconstruction after failed treatment of acetabular fractures.

METHODSA total of 41 patients (41 hips) underwent total hip arthroplasty (THA) using modular TM acetabular components for failed treatment of acetabular fractures at our hospital between January 2007 and December 2012. Among these patients, two were lost to follow-up. Therefore, 39 patients (39 hips) were finally included in this study. The Harris hip score before and after the surgery, satisfaction level of the patients, and radiographic results were assessed.

RESULTSThe mean Harris hip score increased from 34 (range, 8-52) before surgery to 91 (range, 22-100) at the latest follow-up examination (P < 0.001). The results were excellent for 28 hips, good for six, fair for three, and poor for two. Among the 39 patients, 25 (64%) and 10 (26%) were very satisfied and somewhat satisfied, respectively. All cups were found to be fully incorporated, and no evidence of cup migration or periacetabular osteolysis was noted.

CONCLUSIONSDespite the technically demanding nature of the procedure, THA using modular TM acetabular components showed good durability and functionality and may be an effective reconstruction option for failed treatment of acetabular fractures.

Acetabulum ; diagnostic imaging ; injuries ; surgery ; Adult ; Aged ; Arthroplasty, Replacement, Hip ; adverse effects ; Female ; Follow-Up Studies ; Fractures, Bone ; surgery ; Humans ; Male ; Middle Aged ; Treatment Failure

Musculoskeletal injuries following seizures have a high morbidity and mortality. These injuries are often missed and the diagnosis is delayed due to a lack of clinical suspicion and appropriate investigations.We report a case of 72 years old male with simultaneous bilateral central acetabular fracture dislocation and bilateral posterior shoulder fracture dislocation secondary to an epileptic seizure. Present study high- lights the significance of clinical suspicion and clinico-radiological evaluation for diagnosis of a rare injury following episode of seizures. Simultaneous fracture dislocation of all four limbs treated with a holistic approach can lead to a good functional recovery. Surgical management with open reduction and internal fixation is preferred and replacement arthroplasty should be reserved for cases with implant failure and elderly patients.
Acetabulum ; injuries ; Aged ; Epilepsy ; complications ; Fracture Dislocation ; diagnostic imaging ; surgery ; Fractures, Bone ; surgery ; Humans ; Male ; Shoulder Fractures ; diagnostic imaging ; surgery

OBJECTIVETo investigate the operative reduction techniques and clinical results of surgical treatment of type C1 (AO/ASIF) acetabular fracture by posteroproximal-posteroanterior sequential reduction and internal fixation.

METHODSFrom August 2004 to January 2012, 13 patients with type C1 (AO/ASIF) acetabular fracture were treated by posteroproximal-posteroanterior sequential reduction and internal fixation. Of them, 8 cases were male and 5 cases were female with an average age of 42 years years old (ranged, 18 to 64). Pelvis 3-dimentional CT reconstruction were used to confirmed the classification of fracture, and the operation were performed during from 5 to 20 days with an average of 9.5 days. Operation time, blood loss, complications and reduction were recorded and evaluated. The function of hip joint were accessed at the final follow-up.

RESULTSThe operation time ranged from 190 to 290 min with an average of 240 min. The mean blood loss was 1 800 ml (ranged, 1 300 to 3 000 ml). One case had superficial infection and healed after 3 weeks. According to Matta reduction criteria, 8 cases obtained anatomical reduction, 4 cases got satisfied results and 1 cases got unsatisfied results. Eleven cases were followed up with an average of (24.0 +/- 8.0) months, and 2 cases were lost to follow-up. According to revised Mede d'Aubingne and Postel evaluation system, 7 cases got excellent results, 2 good, 1 moderate and 1 poor.

CONCLUSIONPosteroproximal-posteroanterior sequential reduction and internal fixation for the treatment of type C1 (AO/ASIF) acetabular fracture can achieve satisfied surgical proces and operation quality.

Acetabulum ; diagnostic imaging ; injuries ; surgery ; Adolescent ; Adult ; Female ; Fracture Fixation, Internal ; Hip Fractures ; diagnostic imaging ; surgery ; Hip Joint ; diagnostic imaging ; surgery ; Humans ; Male ; Middle Aged ; Radiography ; Treatment Outcome ; Young Adult

OBJECTIVETo discuss clinical effects of complex acetabular fracture.

METHODSFrom January 2005 to December 2010, totally 31 patients with complex acetabular fracture received surgery. There were 21 males and 10 females with an average age of 38.6 years old (ranged, 31 to 57). X-ray, CT, operation scheme and clinical efficiacy were retrospectively analyzed. American Academy of Orthopaedic Surgery standard was used to evaluate hip joint function.

RESULTSAll patients were followed up from 12 to 36 months with an average of 17.6 months. No complications and neurovascular injury occurred. One case received total hip replacement arthroplasty. There were 17 cases obtained anatomical reduction, 12 cases got satisfied reduction and 2 cases not satisfied. According to American Academy of Orthopaedic Surgery standard, 18 cases got excellent result, good in 9 cases, fair in 3 cases and poor in 1 case.

CONCLUSIONComplex acetabular fracture combine with lots of complications and easily had occurre postoperative complications. It can improve curative effect by accurate reduction and reliable fixation and maximize restoring function of hip joint.

Acetabulum ; diagnostic imaging ; injuries ; surgery ; Adult ; Female ; Fracture Fixation, Internal ; Hip Fractures ; diagnostic imaging ; surgery ; Humans ; Male ; Middle Aged ; Radiography ; Retrospective Studies ; Treatment Outcome

OBJECTIVETo investigate the clinical usage of percutanious retrograde acetabular anterior horn screw fixation.

METHODSFrom June 2006 to November 2011,27 patients with anterior horn accetabular fractures were treated with percutaneous retrograde screw. There were 20 males and 7 females with an average age of 35 years (ranged,20 to 61). According to Tile classification,type A was in 5 cases,type B was in 18 cases and type C was in 4 cases. The intra-operative blood loss volume, fractured reduction and screw location were observed.

RESULTSPostoperative X-ray and CT scan showed good reduction. According to the standard of Matta, 10 cases got excellent results, 15 good and 2 poor. All fractures healed and no complications such as neurovascular injuries and femoral head necrosis were found.

CONCLUSIONPercutanious retrograde acetabular anterior horn screw technique have advantages of little trauma, less blood loss volume, reliable fixation, which can be effectively used in clinic.

Acetabulum ; diagnostic imaging ; injuries ; surgery ; Adult ; Bone Screws ; Female ; Fracture Fixation, Internal ; methods ; Fractures, Bone ; diagnostic imaging ; surgery ; Humans ; Male ; Middle Aged ; Radiography