The theory of " heart governing the exterior" derives from Prohibition of Pricking in Suwen, which has an important position in the clinical practice of traditional Chinese medicine. This article sorts out the interpretation of " heart governing the exterior" of physicians in the past dynasties, and summarizes the clinical application of " heart governing the exterior" in chest painful impediment, warm disease, dermatosis, allergic rhinitis, tic disorder, and diabetic neuropathy. It is found that the theory of " heart governing the exterior" is widely used in clinical practice and has good effects. This paper further expands and enhances its theoretical connotation, that is, the physiological and pathological connection and clinical application of the three dimensions of heart yang, heart blood, and heart spirit with the life and mental activities dominated by it, as well as the overall external performance. In addition, by exploring the relationship between " heart governing the exterior" and " brain-heart axis" , " brain-skin axis" in Western medicine, it indirectly confirms the rationality of " heart governing the exterior" in Western medicine, and lays the foundation for the further development and application of the theory of " heart governing the exterior" .

ObjectiveTo explore the effectiveness of health information dissemination and its influencing factors using the "Shanghai CDC" WeChat public account as a case study, providing references for public health institutions to optimize the use of official new media platforms for effective publicity. MethodsA total of 1 030 headline articles published on the "Shanghai CDC" WeChat public account between 2016 and 2019 were analyzed using content analysis and non-parametric tests to examine the impact of factors such as titles and content categories. ResultsFrom 2016 to 2019, the number of WeChat public account followers increased by 280 000, with the articles accumulating over 8.8 million views. The median (P₂₅, P₇₅) open rate of articles was 5.90% (3.69%, 10.31%), and the median (P₂₅, P₇₅) sharing and forwarding rate was 6.60% (4.25%, 9.17%). Factors such as the use of first- and second-person pronouns, degree adverbs, negative adverbs, explicit viewpoints, and title length all significantly affected the open rate of articles, with OR (95%CI) values of 0.175 (0.041‒0.756), 32.606 (2.350‒452.432), 4.079 (1.093‒15.230), 0.106 (0.028‒0.409), and 1.184 (1.063‒1.319),respectively (all P<0.05). In terms of content, statistical significant differences in dissemination effectiveness were observed across article categories and themes (P<0.05). In terms of article categories, articles related to news hotspots and service information had higher open rates of 9.58% and 14.00%, respectively. These two types of articles also obtained higher sharing and forwarding rates of 7.65% and 9.16%, respectively. In terms of article topics, compared with healthy life and health products, among the top four topics in terms of publication volume, the open rates of articles about infectious diseases and disease-causing biology and immunization programs were higher, accounting for 7.88% and 6.88%, respectively, with no significant difference in sharing and forwarding rates. ConclusionThe "Shanghai CDC" WeChat public account demonstrated good dissemination effectiveness. Enhancing article titles by increasing informational content and degree adverbs (e.g., "highly," "most," and "extremely") and negative adverbs (e.g., "no") can improve dissemination reach. Public health WeChat accounts should incorporate news hotspots or service information in their articles. While maintaining their strengths in disseminating knowledge on infectious diseases and immunization programs, they should also enhance public education in other professional fields within their scope of responsibility to improve the overall dissemination impact of health information.

ObjectiveTo construct a family-centered care model for children with tuberculosis based on the double ABC-X model, and to evaluate its clinical effects. MethodsFrom December 2022 to October 2023, 64 newly admitted children with tuberculosis who met the criteria and their caregivers were recruited from the tuberculosis department of Shanghai Public Health Clinical Center were randomly divided into an experimental group (32 cases) and a control group (32 cases).The control group was given a conventional health care, while the experimental group was given a family-centered health care intervention based on the double ABC-X model, in which a multidisciplinary care team provided personalized information and emotional support for the caregivers and their children. Medication adherence of the children, caregiver’s teading burden, and disease management competence were compared between the 2 groups. ResultsA total of 29 cases in the experimental group and 27 cases in the control group completed the intervention. At 12 weeks of intervention, the medication adherence score (7.72±0.45 vs 7.41±0.50, P<0.05) and disease management competence score (36.97±7.85 vs 31.56±7.30, P<0.05) were higher in the experimental group than that in the control group while the caregiving burden score (31.79±13.40 vs 40.04±9.01, P<0.05) and difficulty of disease management score (30.41±12.41 vs 38.56±9.48, P<0.05) were lower than that in the control group. At 24 weeks of intervention, the medication adherence score (7.34±0.97 vs 6.70±1.14, P<0.05) and disease management competence score (42.07±6.93 vs 35.63±7.32, P<0.05) were higher in the experimental group than that in the control group as well, but the caregiving burden score (31.62±11.72 vs 39.63±10.17, P<0.05) and difficulty of disease management score (30.59±10.87 vs 37.81±9.32, P<0.05) were lower than that in the control group. ConclusionFamily-centered care based on the double ABC-X model can effectively promote medication adherence among children with tuberculosis, reduce caregivers’ care burden and disease management difficulties, and improve caregiver’s disease management competence.

To enhance the therapeutic efficacy of the baicalin-berberine complex(BA-BBR) in the treatment of ulcerative colitis(UC), BA-BBR nanocrystal microspheres(BA-BBR NC MS) were prepared using the dropping method. The microspheres were characterized in terms of morphology, particle size, differential scanning calorimetry(DSC), and powder X-ray diffraction(XRD). The release profiles of BA and BBR from the microspheres were measured, and the drug release mechanism was investigated. A rat model of UC was induced by 5% dextran sodium sulfate(DSS) and treated continuously for 7 days to evaluate the therapeutic effects of different formulations. The results showed that the prepared BA-BBR MS and BA-BBR NC MS were uniform gel spheres with particle sizes of(1.77±0.16) mm and(1.67±0.08) mm, respectively. After drying, the gels collapsed inward and exhibited a rough surface. During the preparation process, the BA-BBR nanocrystals(BA-BBR NC) were uniformly encapsulated within the microspheres. The release profiles of the microspheres followed a first-order kinetic model, and the 12-hour cumulative release of BA and BBR from BA-BBR NC MS was higher than that from BA-BBR MS. Compared with BA-BBR, BA-BBR NC, and BA-BBR MS, BA-BBR NC MS further alleviated UC symptoms in rats, most significantly reducing the levels of TNF-α, IL-1β, IL-6, and MPO, while increasing the level of IL-4 in colon tissues. These results indicate that BA-BBR NC MS, based on a "nano-in-micro" design, can deliver BA-BBR to the intestine and exert significant therapeutic effects in a UC rat model, suggesting it as a promising new strategy for the treatment of UC.
Animals ; Colitis, Ulcerative/metabolism* ; Rats ; Nanoparticles/chemistry* ; Microspheres ; Male ; Berberine/administration & dosage* ; Flavonoids/administration & dosage* ; Rats, Sprague-Dawley ; Drugs, Chinese Herbal/administration & dosage* ; Humans ; Particle Size ; Tumor Necrosis Factor-alpha/immunology* ; Drug Liberation ; Drug Compounding

Objective: To compare the efficacy of heat and acid elution methods for IgG anti-M and anti-Ku. Methods: Ten samples with IgG anti-M and two samples with IgG anti-Ku were selected and standardized to a titer of 64. These antibodies underwent overnight absorption at 4℃ with O-type MM and kk-type erythrocytes, and then heat and acid elution methods were used on the absorbed sensitized erythrocytes respectively by detecting the titer of anti-M and anti-Ku in the eluate to compare the differences in the elution efficiency of IgG anti-M and anti-Ku between the two elution methods. Results: In heat elution tests, all 10 anti-M samples showed positive results with titers ranging from 8 to 64, while 2 anti-Ku samples yielded negative results. In acid elution tests, all 10 anti-M samples demonstrated negative results, whereas both anti-Ku (n=2) samples exhibited positive reactions with consistent titers of 32. Following acid elution with subsequent heat elution, 8 of 10 anti-M samples showed positive results with titers ranging from 8 to 32, while 2 remained negative. Both anti-Ku samples demonstrated positive with titers of 4. Conclusion: Heat elution demonstrated superior efficiency for IgG anti-M compared to acid elution, whereas acid elution showed greater efficacy for IgG anti-Ku than heat elution.

Objective: To compare the efficacy of heat and acid elution methods for IgG anti-M and anti-Ku. Methods: Ten samples with IgG anti-M and two samples with IgG anti-Ku were selected and standardized to a titer of 64. These antibodies underwent overnight absorption at 4℃ with O-type MM and kk-type erythrocytes, and then heat and acid elution methods were used on the absorbed sensitized erythrocytes respectively by detecting the titer of anti-M and anti-Ku in the eluate to compare the differences in the elution efficiency of IgG anti-M and anti-Ku between the two elution methods. Results: In heat elution tests, all 10 anti-M samples showed positive results with titers ranging from 8 to 64, while 2 anti-Ku samples yielded negative results. In acid elution tests, all 10 anti-M samples demonstrated negative results, whereas both anti-Ku (n=2) samples exhibited positive reactions with consistent titers of 32. Following acid elution with subsequent heat elution, 8 of 10 anti-M samples showed positive results with titers ranging from 8 to 32, while 2 remained negative. Both anti-Ku samples demonstrated positive with titers of 4. Conclusion: Heat elution demonstrated superior efficiency for IgG anti-M compared to acid elution, whereas acid elution showed greater efficacy for IgG anti-Ku than heat elution.

Poly(ADP-ribosyl)ation (PARylation) is a specific form of post-translational modification (PTM) predominantly triggered by the activation of poly-ADP-ribose polymerase 1 (PARP1). However, the role and mechanism of PARylation in the advancement of acute kidney injury (AKI) remain undetermined. Here, we demonstrated the significant upregulation of PARP1 and its associated PARylation in murine models of AKI, consistent with renal biopsy findings in patients with AKI. This elevation in PARP1 expression might be attributed to trimethylation of histone H3 lysine 4 (H3K4me3). Furthermore, a reduction in PARylation levels mitigated renal dysfunction in the AKI mouse models. Mechanistically, liquid chromatography-mass spectrometry indicated that PARylation mainly occurred in receptor for activated C kinase 1 (RACK1), thereby facilitating its subsequent phosphorylation. Moreover, the phosphorylation of RACK1 enhanced its dimerization and accelerated the ubiquitination-mediated hypoxia inducible factor-1α (HIF-1α) degradation, thereby exacerbating kidney injury. Additionally, we identified a PARP1 proteolysis-targeting chimera (PROTAC), A19, as a PARP1 degrader that demonstrated superior protective effects against renal injury compared with PJ34, a previously identified PARP1 inhibitor. Collectively, both genetic and drug-based inhibition of PARylation mitigated kidney injury, indicating that the PARylated RACK1/HIF-1α axis could be a promising therapeutic target for AKI treatment.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.

Bispecific antibodies have shown significant efficacy in tumor therapy due to their dual targeting ability, but the complexity of their structure leads to the production of various process-related impurities such as host cell proteins, host cell DNA, and Protein A, and product-related impurities such as semi antibodies, 3/4 antibodies, homodimers, bispecific antibodies lacking one Fab arm, and aggregates during the manufacturing process. This paper systematically summarizes downstream purification strategies for dual antibodies, including affinity chromatography, deep filtration, hydroxyapatite chromatography, hydrophobic interaction chromatography, ion exchange chromatography, and multimodal chromatography, to efficiently remove various impurities and provide theoretical support for the purification of dual antibodies.