Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To understand and evaluate the overall status of nucleic acid detection efficacy for influenza A virus in the na-tionwide clinical laboratories of China,and discover and identify the potential issues to further improve the detection quality.Methods During 2024,the National Center for Clinical Laboratories distributed five samples to nationwide 1 367 participating laboratories.The detection efficacy of each participating laboratory was evaluated by calculating the overall percent agreement(OPA)of the test results using different detection reagents.Results The results of OPA,positive percent agreement(PPA)and negative percent agreement(NPA)of the five samples were 99.87％(6 826/6 835),99.89％(5 462/5 468),and 99.78％(1 364/1 367),respectively.No statistical difference of PPAs was observed between the H3N2 samples with different concentrations,between H1N1(2009)and H3N2 samples with equivalent concentration(1.0×104 copies/mL),and between seasonal H1N1 and H3N2 samples with equivalent concen-tration(1.0×105 copies/mL)(P＞0.05).Conclusion The results indicated the clinical laboratories in China exhibited robust efficacy in the molecular detection for two prevalent influenza A virus subtypes,i.e.,H1N1(2009)and H3N2.However,false-negative and false-positive results were encountered in a few laboratories.

Objective To understand and evaluate the overall status of nucleic acid detection efficacy for influenza A virus in the na-tionwide clinical laboratories of China,and discover and identify the potential issues to further improve the detection quality.Methods During 2024,the National Center for Clinical Laboratories distributed five samples to nationwide 1 367 participating laboratories.The detection efficacy of each participating laboratory was evaluated by calculating the overall percent agreement(OPA)of the test results using different detection reagents.Results The results of OPA,positive percent agreement(PPA)and negative percent agreement(NPA)of the five samples were 99.87％(6 826/6 835),99.89％(5 462/5 468),and 99.78％(1 364/1 367),respectively.No statistical difference of PPAs was observed between the H3N2 samples with different concentrations,between H1N1(2009)and H3N2 samples with equivalent concentration(1.0×104 copies/mL),and between seasonal H1N1 and H3N2 samples with equivalent concen-tration(1.0×105 copies/mL)(P＞0.05).Conclusion The results indicated the clinical laboratories in China exhibited robust efficacy in the molecular detection for two prevalent influenza A virus subtypes,i.e.,H1N1(2009)and H3N2.However,false-negative and false-positive results were encountered in a few laboratories.

Chronic hepatitis B virus (HBV) infection remains a major global public health concern. The persistent presence of intrahepatic covalently closed circular DNA (cccDNA) poses a major challenge to the complete cure of chronic HBV infection. Therefore, identifying reliable and effective serological surrogate markers for cccDNA holds great clinical significance in evaluating antiviral efficacy, predicting prognosis, and guiding the clinical management of chronic HBV-infected patients. In recent years, serum HBV RNA has emerged as a promising non-invasive alternative marker for cccDNA, offering the potential for monitoring disease progression and predicting prognosis in chronic HBV-infected patients. In this review, we summarize recent studies on HBV RNA, highlighting its ability to assess the immune and histological status of patients, and discussing its value in guiding the timing of antiviral therapy. Furthermore, we systematically summarize the clinical significance of HBV RNA in multiple domains: monitoring viral replication, evaluating antiviral treatment efficacy, predicting relapse after treatment cessation, and guiding new antiviral strategies. This review aims to provide clinicians with valuable insights for better utilizing this marker in the clinical management of chronic HBV infection.

Hepatic encephalopathy (HE) is a kind of neuropsychiatric syndrome caused by acute or chronic liver failure or portosystemic venous shunt (hereinafter referred to as portosystemic shunt), which can lead to the occurrence of functional impairment, personality and behavioral abnormalities, coma, and even death. Most patients with cirrhosis combined with HE have spontaneous portosystemic shunt (SPSS), especially those with recurrent or persistent HE. Internal medicine's current standard of treatment for HE associated with SPSS in cirrhotic patients is unsatisfactory, and even after treatment, recurrent HE episodes may still occur. Although interventional therapy has shown significant results and has been applied in clinical practice for many years for SPSS-associated HE, the number of treatment-related cases is relatively small, and there is a lack of large samples and well-designed research. Currently, interventional therapy for SPSS-associated HE in patients with cirrhosis is still under continuous exploration.

Dihydromyricetin is a flavonoid mainly found in Ampelopsis grossedentata,which has attracted extensive attention due to its diverse pharmacological activities in recent years.However,its low oral bioavailability limits its clinical application.In this article,the pharmacological effects of dihydromyricetin on antibacterial,antiviral,antitumor,inhibition of neuroinflammation,antioxidant,and hepatorenal protection were reviewed.By summarizing,it can be seen that the pharmacological effects of dihydromyricetin are related to the traditional efficacy of Ampelopsis grossedentata.Scholars have used new preparation technologie to design dosage forms and new drug delivery systems such as liposomes,nanoparticles,microemulsions and nanoemulsions,microcapsules and nanocapsules,which can improve the bioavailability and efficacy of dihydromyricetin.Which can provide reference for the development of new drugs.

Dihydromyricetin is a flavonoid mainly found in Ampelopsis grossedentata,which has attracted extensive attention due to its diverse pharmacological activities in recent years.However,its low oral bioavailability limits its clinical application.In this article,the pharmacological effects of dihydromyricetin on antibacterial,antiviral,antitumor,inhibition of neuroinflammation,antioxidant,and hepatorenal protection were reviewed.By summarizing,it can be seen that the pharmacological effects of dihydromyricetin are related to the traditional efficacy of Ampelopsis grossedentata.Scholars have used new preparation technologie to design dosage forms and new drug delivery systems such as liposomes,nanoparticles,microemulsions and nanoemulsions,microcapsules and nanocapsules,which can improve the bioavailability and efficacy of dihydromyricetin.Which can provide reference for the development of new drugs.

Hepatic encephalopathy (HE) is a kind of neuropsychiatric syndrome caused by acute or chronic liver failure or portosystemic venous shunt (hereinafter referred to as portosystemic shunt), which can lead to the occurrence of functional impairment, personality and behavioral abnormalities, coma, and even death. Most patients with cirrhosis combined with HE have spontaneous portosystemic shunt (SPSS), especially those with recurrent or persistent HE. Internal medicine's current standard of treatment for HE associated with SPSS in cirrhotic patients is unsatisfactory, and even after treatment, recurrent HE episodes may still occur. Although interventional therapy has shown significant results and has been applied in clinical practice for many years for SPSS-associated HE, the number of treatment-related cases is relatively small, and there is a lack of large samples and well-designed research. Currently, interventional therapy for SPSS-associated HE in patients with cirrhosis is still under continuous exploration.