ObjectiveTo explore the current situation of forensic ethics practice and education by designing a questionnaire on forensic ethics， with a view to exploring the path of forensic ethics education construction. MethodsA total of 667 valid questionnaires were collected using the online survey method， basically covering various regions across the country and all sub-specialties of forensic medicine. Descriptive analysis was used to analyze the relevant data. ResultsMost practitioners had relevant ethical reflections in the process of forensic practice. 69.12% of the respondents indicated that they had studied the relevant rules， but approximately half stated that there were no corresponding ethical norms or standard operating manuals. The specific behaviors violating ethics in different units were diverse. 23.04% of the respondents reported that they had encountered unethical behaviors， but only 4.9% of them reported such violations. In terms of forensic ethics education， 87.75% of the respondents believed that there were issues with the current model of forensic ethics education. Meanwhile， the respondents showed a high degree of recognition for receiving forensic ethics education， with 84.15% of respondents expressing willingness to participate in relevant courses. More than half of respondents were willing to participate in forensic ethics education during undergraduate studies， new employee training， and regular post-employment training. ConclusionCurrently， there is a problem of ethical neglect in forensic work in China. Combining ethics courses with professional courses at the practitioner training stage and providing regular training at the practice stage are effective measures to popularize forensic ethics knowledge， enhance ethical awareness， and improve the quality of practice.

Ferroptosis, a programmed cell death modality discovered and defined in the last decade, is primarily induced by iron-dependent lipid peroxidation. At present, it has been found that ferroptosis is involved in various physiological functions such as immune regulation, growth and development, aging, and tumor suppression. Especially its role in tumor biology has attracted extensive attention and research. Breast cancer is one of the most common female tumors, characterized by high heterogeneity and complex genetic background. Triple negative breast cancer (TNBC) is a special type of breast cancer, which lacks conventional breast cancer treatment targets and is prone to drug resistance to existing chemotherapy drugs and has a low cure rate after progression and metastasis. There is an urgent need to find new targets or develop new drugs. With the increase of studies on promoting ferroptosis in breast cancer, it has gradually attracted attention as a treatment strategy for breast cancer. Some studies have found that certain compounds and natural products can act on TNBC, promote their ferroptosis, inhibit cancer cells proliferation, enhance sensitivity to radiotherapy, and improve resistance to chemotherapy drugs. To promote the study of ferroptosis in TNBC, this article summarized and reviewed the compounds and natural products that induce ferroptosis in TNBC and their mechanisms of action. We started with the exploration of the pathways of ferroptosis, with particular attention to the System X_c^--cystine-GPX4 pathway and iron metabolism. Then, a series of compounds, including sulfasalazine (SAS), metformin, and statins, were described in terms of how they interact with cells to deplete glutathione (GSH), thereby inhibiting the activity of glutathione peroxidase 4 (GPX4) and preventing the production of lipid peroxidases. The disruption of the cellular defense against oxidative stress ultimately results in the death of TNBC cells. We have also our focus to the realm of natural products, exploring the therapeutic potential of traditional Chinese medicine extracts for TNBC. These herbal extracts exhibit multi-target effects and good safety, and have shown promising capabilities in inducing ferroptosis in TNBC cells. We believe that further exploration and characterization of these natural compounds could lead to the development of a new generation of cancer therapeutics. In addition to traditional chemotherapy, we discussed the role of drug delivery systems in enhancing the efficacy and reducing the toxicity of ferroptosis inducers. Nanoparticles such as exosomes and metal-organic frameworks (MOFs) can improve the solubility and bioavailability of these compounds, thereby expanding their therapeutic potential while minimizing systemic side effects. Although preclinical data on ferroptosis inducers are relatively robust, their translation into clinical practice remains in its early stages. We also emphasize the urgent need for more in-depth and comprehensive research to understand the complex mechanisms of ferroptosis in TNBC. This is crucial for the rational design and development of clinical trials, as well as for leveraging ferroptosis to improve patient outcomes. Hoping the above summarize and review could provide references for the research and development of lead compounds for the treatment for TNBC.

[Objective] : To systematically evaluate the overall efficacy of external application of traditional Chinese medicine (EA-TCM) in combination with oral three-step analgesic ladder therapy for patients suffering from cancer-induced bone pain (CIBP). [Methods] : We conducted a literature search of randomized controlled trials on the combination of EA-TCM and three-step analgesic ladder therapy for CIBP across ten databases and two registration systems. It included four Chinese databases [Chinese Biomedical Literature Database (SinoMed), China National Knowledge Infrastructure (CNKI), Wanfang Database, and China Science and Technology Journal Database (VIP) ], six English databases (Scopus, Embase, Web of Science, PubMed, Cochrane Library, and OpenGrey), and two registration systems (Chinese Clinical Trial Registry and ClinicalTrials.gov). The timeframe for the literature search extended from the inception of each database to December 31, 2023. Meta-analysis was performed using RevMan (v5.4.1), and the outcome indicators (pain relief rate, analgesic duration, quality of life, pain intensity, breakthrough pain frequency, and adverse reactions) were graded using GRADE profiler (v3.6). [Results] : According to the established inclusion and exclusion criteria, a total of 43 studies was deemed eligible, involving 3 142 participants with CIBP. The results of meta-analysis showed that compared with oral three-step analgesic ladder therapy alone, the combined therapy of EA-TCM and three-step analgesic ladder has a significant improvement in pain relief rate [risk ratio (RR) = 1.32, 95% confidence interval (CI): 1.24 to 1.41, P < 0.000 01], analgesic duration [mean difference (MD) = 1.33, 95% CI: 0.97 to 1.69, P < 0.000 01], and quality of life (MD = 5.66, 95% CI: 4.88 to 6.44, P < 0.000 01). Furthermore, the combined therapy significantly reduced pain intensity (MD = – 1.00, 95% CI: – 1.19 to – 0.80, P < 0.000 01), breakthrough pain frequency (MD = – 0.43, 95% CI: – 0.51 to – 0.36, P < 0.000 01), and adverse reactions (RR = 0.60, 95% CI: 0.53 to 0.68, P < 0.000 01) in CIBP patients. Based on the GRADE assessment, the level of evidence varied from low to moderate. [Conclusion] EA-TCM combined with the three-step analgesic ladder therapy can effectively alleviate pain symptoms in patients with CIBP and improve their quality of life. Additionally, the EA-TCM can effectively reduce the incidence of adverse reactions associated with three-step analgesic therapy.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective To determine the content and distribution characteristics of the artificial radionuclide ¹³⁷Cs and the natural radionuclides ²¹⁰Pb, ²²⁶Ra, ²²⁸Ra, and ⁴⁰K in wild edible fungi, and calculate the committed effective dose due to ¹³⁷Cs and ²¹⁰Pb in wild edible fungi. Methods Thirty samples of wild edible fungi were collected and their caps and stems were separated. A total of 60 samples were measured for ¹³⁷Cs, ²¹⁰Pb, ²²⁶Ra, ²²⁸Ra, and ⁴⁰K using a BE5030 wide-energy, low-background, high-purity germanium γ spectrometer. The paired analysis of the four radionuclides ²²⁶Ra, ²¹⁰Pb, ¹³⁷Cs, and ⁴⁰K was performed using SPSS 11.5. Results Among the 60 samples, the detection rates and dry weight specific activity ranges of ¹³⁷Cs, ²¹⁰Pb, ²²⁶Ra, ²²⁸Ra, and ⁴⁰K were 97% and 0.62-384 Bq/kg, 73% and 6.4-159 Bq/kg, 52% and 0.7-28.8 Bq/kg, 5% and 0.43-2.18 Bq/kg and 100% and （77.4-264) × 10 Bq/kg, respectively. Conclusion Based on the analysis of the 60 samples, the detection rate of radionuclides is in the order of ⁴⁰K, ¹³⁷Cs, ²¹⁰Pb, ²²⁶Ra, and ²²⁸Ra. In terms of the specific activity, the distribution of ⁴⁰K and ²²⁶Ra in wild edible fungi in the same region is basically uniform, while the content of ²¹⁰Pb and ¹³⁷Cs fluctuates in different samples. Although ¹³⁷Cs and ²¹⁰Pb can be detected in most of the wild edible fungi, the annual committed effective dose due to ingestion of wild edible fungi is negligible.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

Methods: This retrospective study analyzed 32 consecutive IDS patients who underwent UEDD surgery. Clinical features, laboratory data (erythrocyte sedimentation rate and C-reactive protein), and treatment outcomes were analyzed. Results: Definite microorganisms were identified in 27 patients (84.3%), with 24 (88.9%) meeting cure criteria. The cure rate was significantly higher in the detected pathogen group compared to the undetected pathogen group (88.9% vs. 80%; χ²=19.36, p<0.0001). Metagenomic next generation sequencing (mNGS) provided faster diagnosis (41.72±6.81 hours) compared to tissue culture (95.74±35.47 hours, p<0.05). The predominant causative pathogen was Mycobacterium tuberculosis, followed by Staphylococcus aureus. Significant improvements were observed in Visual Analog Scale pain scores, from a mean of 7.9 preoperatively to 1.06 at 1 year postoperatively. The Oswestry Disability Index revealed a similar trend, showing significant improvement (p<0.05). Conclusions UEDD is a viable alternative to traditional open surgery for managing IDS in high-risk patients. UEDD offers a dual therapeutic-diagnostic advantage during the initial admission phase, enabling simultaneous debridement, neurological decompression, and targeted biopsy in a single intervention. Compared with traditional tissue culture, mNGS enables rapid microbiological diagnosis and extensive pathogen coverage.

Methods: This retrospective study analyzed 32 consecutive IDS patients who underwent UEDD surgery. Clinical features, laboratory data (erythrocyte sedimentation rate and C-reactive protein), and treatment outcomes were analyzed. Results: Definite microorganisms were identified in 27 patients (84.3%), with 24 (88.9%) meeting cure criteria. The cure rate was significantly higher in the detected pathogen group compared to the undetected pathogen group (88.9% vs. 80%; χ²=19.36, p<0.0001). Metagenomic next generation sequencing (mNGS) provided faster diagnosis (41.72±6.81 hours) compared to tissue culture (95.74±35.47 hours, p<0.05). The predominant causative pathogen was Mycobacterium tuberculosis, followed by Staphylococcus aureus. Significant improvements were observed in Visual Analog Scale pain scores, from a mean of 7.9 preoperatively to 1.06 at 1 year postoperatively. The Oswestry Disability Index revealed a similar trend, showing significant improvement (p<0.05). Conclusions UEDD is a viable alternative to traditional open surgery for managing IDS in high-risk patients. UEDD offers a dual therapeutic-diagnostic advantage during the initial admission phase, enabling simultaneous debridement, neurological decompression, and targeted biopsy in a single intervention. Compared with traditional tissue culture, mNGS enables rapid microbiological diagnosis and extensive pathogen coverage.