Based on the "Qi-blood-meridians" system， it is proposed that recurrence after radiofrequency ablation （RFA） for arrhythmia originates from damage to the heart and injury to the meridians caused by thermal burns. Disorder of qi movement， blood obstruction and heat constraint are the prerequisites for recurrence， while internal consumption of deficient qi， yin damage and scarce blood are key factors in frequent episodes. Latent pathogen of both phlegm and stasis， along with condensation of pathogenic yin， is the main cause of disease progression. Accordingly， self-made Tong Xin Beverage （通心饮） with 18 herbs is used throughout the postoperative intervention process to nourish the heart， unblock the meridians， restore vessels in balance of yin and yang. Self-made Qingxin Dingji Decoction （清心定悸汤） can be used to promote qi movement， diffuse stagnation， relieve heat and activate blood circulation so as to facilitate early recovery. Self-made Peiben Yangxin Decoction （培本养心汤） can boost qi and nourish yin， harmonize the ying （营） level and nourish blood， thereby improving long-term prognosis. In addition， Shiwei Wendan Decoction combined （十味温胆汤） with Taoren Honghua Decoction （桃仁红花煎） resolves phlegm， dissipates masses， removes stasis， and softens hardness， which can be used to prevent disease aggravation. These approaches aim to provide ideas and references for clinical practice.

OBJECTIVE: To evaluate the effectiveness of correcting post-traumatic equinovarus deformity using Ilizarov external fixation technique combined with limited osteotomy. METHODS: A retrospective analysis was conducted on clinical data from 29 patients with post-traumatic equinovarus deformity treated between July 2018 and March 2023. The cohort included 18 males and 11 females, with ages ranging from 15 to 57 years (mean, 24.3 years). All patients exhibited ankylosed ankle joints with equinovarus deformity. During surgery, external fixators were installed according to Ilizarov pinning principles, and minimally invasive osteotomy was performed at the ankle joint. Concurrently, soft tissue release was achieved via minimally invasive Achilles tendon lengthening. Postoperatively, multiplanar deformity correction was accomplished through gradual adjustment of the external fixator. The fixator was removed after bony union at the osteotomy site, followed by bracing. The surgical duration, intraoperative blood loss, fixator wear time, and complications were recorded. Postoperative outcomes included assessment of deformity correction and bony union at the osteotomy site. Functional improvement and pain relief were evaluated using pre- and post-operative scores from the American Orthopaedic Foot & Ankle Society (AOFAS) ankle-hindfoot score and visual analogue scale (VAS) score. RESULTS: All 29 patients were followed up 12-24 months (mean, 18 months). The mean surgical duration was 85.6 minutes, with a mean intraoperative blood loss of 110 mL. Full deformity correction was achieved within 26-80 days (mean, 40.7 days) through progressive fixator adjustments. At correction completion, all ankles restored to a neutral or 5°-10° dorsiflexed position with plantigrade foot function. Superficial pin tract infections occurred in 3 patients (10.3%), resolved with local wound care, enhanced nursing, and oral antibiotics. No deep or systemic infections was observed. One patient sustained a calcaneal half-pin fracture due to a fall during fixator wear, but no bone fragment displacement occurred. No vascular or neurological complication was reported. Complete bony union was achieved at all osteotomy sites without nonunion. At last follow-up, the AOFAS ankle-hindfoot score improved from preoperative 42.7±8.7 to postoperative 65.7±9.3, and the VAS score decreased from preoperative 4.5±1.3 to postoperative 2.5±1.1, with significant differences ( P<0.05). Functional outcomes were rated as excellent in 14 cases, good in 13 cases, fair in 1 case, and poor in 1 case, with an excellent and good rate of 93.1%. CONCLUSION The progressive correction strategy combining Ilizarov external fixation technique with limited foot osteotomy effectively corrects post-traumatic equinovarus deformity while preserving soft tissue integrity. This method is associated with minimal, largely controllable complications and achieves alignment stability and fusion outcomes comparable to traditional open surgery, making it an effective treatment for complex foot and ankle deformities.
Humans ; Male ; Female ; Osteotomy/methods* ; Adult ; Retrospective Studies ; Ilizarov Technique ; Middle Aged ; Adolescent ; External Fixators ; Young Adult ; Treatment Outcome ; Ankle Joint/surgery* ; Clubfoot/etiology* ; Minimally Invasive Surgical Procedures/methods*

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To compare the changes in pelvic floor electrophysiology and imaging in female patients with myofascial pelvic pain (MFPP), and to explore the characteristics and significance of these changes.Methods:A total of 49 MFPP patients who were admitted to the of Dalian Women′s and Children′s Medical Center (Group) from January 2019 to October 2021 were randomly selected as the research group, and 41 healthy women during the same period were selected as the control group. Both groups filled in the center′s medical history and general condition survey form. French PHENIX series pelvic floor muscle potential detection instrument was used to detect the resting vaginal muscle potential and maximum muscle potential of the two groups. The static tension, dynamic tension and pelvic floor muscle contraction force of the two groups were measured by French PHENIX series electronic tensioning apparatus with 5° and 10° opening respectively. Two dimensional transperineal ultrasound and three dimensional transvaginal ultrasound produced by B-K Company in Denmark were used to measure the length between the lower margin of the bladder neck from the symphysis pubis and the bladder neck and the bladder bottom (BND, BSD), the diameter of the genital tract hiatus and the angle of the anus and rectum. The area, anterior-posterior diameter, transverse diameter and different damage degrees of levator ani levator were measured.Results:The resting muscle potential of the study group was higher than that of the control group: 2 μV vs. 1 μV ( P<0.05); the maximum vaginal myopotential was higher than that of the control group: 7 μV vs. 6 μV ( P<0.05). The static tension, dynamic tension and contractile force: 204 g/m 2 vs. 175 g/m 2, 450 g/m 2 vs. 410 g/m 2 and 237 g/m 2 vs. 51 g/m 2 of pelvic floor muscle in the study group were higher than those in the control group when the tensioner was opened for 5° ( P<0.05). In resting state, BND, BSD and reproductive tract hiatus diameter in the study group were smaller than those in the control group: 14.0 mm vs. 16.7 mm, 15.3 mm vs. 19.7 mm, 46.7 mm vs. 49.5 mm ( P<0.05). The anal angle was greater than that of the control group: 129° vs. 112° ( P<0.05). The anal right angle in the study group was greater than that in the control group: 113° vs. 109° ( P<0.05). In the resting state, the area of levator ANI hiatus: 10.1 cm 2 vs. 11.6 cm 2, anterior and posterior diameters: 44.2 mm vs. 47.4 mm, transverse diameters and the defect scores of levator ani in the study group were all smaller than those in the control group ( P<0.05). Conclusions:MFPP presents with persistent pelvic floor muscle spasm and loss of coordination. MFPP can be treated by spasmolysis of pelvic floor muscle and fascia, which provides reference value for clinical treatment.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

ObjectiveTo improve the response capabilities to disasters and prevent major epidemics， it is of practical use to study the capability evaluation system of the national emergency medical rescue team that combines theoretical training and practical exercises， to enhance the overall quality of the teams. MethodsFirst， a capability assessment system for the national emergency medical rescue team was constructed based on the INSARAG External Classification （IEC） standards of the national emergency medical rescue team. Then， based on the outcome based education （OBE） concept， we conducted innovative research on the curriculum design and exercise programs for team building and member training. Finally， an empirical analysis was conducted on the effectiveness of the evaluation system and training exercises based on the statistical analysis of the comprehensive quality evaluation of the Shanghai national emergency medical rescue team from 2020 to 2023， as well as the empirical analysis of the rescue exercise on the Cruise of spectrum. ResultsBased on the linear regression analysis of each core competency indicators， the five core competencies in the evaluation system， including rescue skills， medical and health knowledge， disaster coping ability， team cooperation ability， and mental resilience training， were positively correlated with the cumulative number of trainings （r=0.71， r=0.76， r=0.81， r=0.84， r=0.96，all P<0.05）， indicating that the training was effective and the course design was reasonable. Empirical cases showed that the three-dimensional rescue drill model had remarkable results in the actual combat application and ability improvement of team members. ConclusionThe training courses and drills designed based on the three-level assessment system are effective in improving the comprehensive capabilities of the national emergency medical rescue team.

Objective To establish a culture method for micropapillary lung adenocarcinoma organoids and conduct targeted drug screening.Methods Organoids were extracted and cultured from a surgical tissue sample of a patient diagnosed with micropapillary lung adenocarcinoma,and the growth of lung cancer organoids was observed and recorded dynamically.The morphological and gene expression characteristics of tumor cells between lung cancer organoids and parental tissue were compared using hematoxylin eosin(HE)staining and immunohistochemical methods.Real time fluorescence quantitative polynucleotide chain reaction(qRT-PCR)method was used to detect gene mutations in lung cancer parental tissue and organoids.Finally,based on results of genetic testing,targeted drugs were selected and their therapeutic effects were verified.Results We have successfully cultured spherical organoids from micropapillary lung adenocarcinoma tissue,which can be passaged for at least 3 generations.HE staining results showed that the morphology of tumor cells in organoids was roughly consistent with that of parental tissue.The immunohistochemical results showed that the protein expression levels of various genes in lung cancer organoids and parental tissue were roughly the same.Results of gene mutation analysis showed that the mutated genes in lung cancer parental tissue and organoids were consistent,both reflecting RET fusion.The screening results of targeted drugs based on lung cancer organoids showed that vandertinib had the best anti-tumor effect in vitro.Conclusion Drug screening experiments based on micropapillary lung adenocarcinoma organoids can screen highly efficient targeted drugs in a short period of time,which may benefit patients with micropapillary lung adenocarcinoma.

This paper discussed the pathogenesis and treatment ideas of recurrent angina pectoris after percutaneous coronary intervention （PCI） based on qi and blood vessels. It is believed that patients after PCI often have poor qi and blood circulation and damaged vessels and collaterals as the basis， and subsequently suffer from binding of phlegm and stasis， accumulated and sticky， which further lead to the vessels congested and blocked， qi and blood declined， and the body and functions of the heart damaged. Accordingly， in terms of the treatment principles， it has been proposed to regulate qi and transport blood， unblock and nourish vessels， dissolve phlegm and dispel stasis， direct turbidity downward and unblock collaterals， supplement qi and nourish the body， unblock vessels and rejuvenate meridians， by using self-made Tiaoqi Yunxue Formula （调气运血方）， self-made Huoxue Jiangzhuo Formula （活血降浊方） and self-made Shenrong Tongmai Formula （参茸通脉方） in their modifications respectively， in order to provide reference for clinical diagnosis and treatment.

In recent years, post-stroke depression (PSD) and post-stroke cognitive impairment (PSCI) have gradually attracted the attention of scholars as common stroke-related non-motor symptoms. As an emerging non-invasive neuroimaging tool, functional near-infrared spectroscopy (fNIRS) has been widely used in the study of neurological diseases, which can evaluate the functional status and recovery of these patients by monitoring changes in cerebral blood circulation and oxygenation signals; fNIRS is now being increasingly used in PSD and PSCI studies. This review mainly focuses on the research progress of fNIRS in identifying PSD and PSCI, exploring their neural mechanisms, and evaluating treatment effects, as well as advantages, disadvantages and future development prospects of fNIRS in clinical application, so as to provide some references for research on rehabilitation of affective disorders and cognitive disorders in stroke patients.

Diabetes mellitus(DM)is a disease syndrome characterized by chronic hyperglycaemia.A long-term high-glucose environment leads to reactive oxygen species(ROS)production and nuclear DNA damage.Human umbilical cord mesenchymal stem cell(HUcMSC)infusion induces significant antidiabetic effects in type 2 diabetes mellitus(T2DM)rats.Insulin-like growth factor 1(IGF1)receptor(IGF1R)is important in promoting glucose metabolism in diabetes;however,the mechanism by which HUcMSC can treat diabetes through IGF1R and DNA damage repair remains unclear.In this study,a DM rat model was induced with high-fat diet feeding and streptozotocin(STZ)administration and rats were infused four times with HUcMSC.Blood glucose,interleukin-6(IL-6),IL-10,glomerular basement membrane,and renal function were examined.Proteins that interacted with IGF1R were determined through coimmunoprecipitation assays.The expression of IGF1R,phosphorylated checkpoint kinase 2(p-CHK2),and phosphorylated protein 53(p-p53)was examined using immunohistochemistry(IHC)and western blot analysis.Enzyme-linked immunosorbent assay(ELISA)was used to determine the serum levels of 8-hydroxydeoxyguanosine(8-OHdG).Flow cytometry experiments were used to detect the surface markers of HUcMSC.The identification of the morphology and phenotype of HUcMSC was performed by way of oil red"O"staining and Alizarin red staining.DM rats exhibited abnormal blood glucose and IL-6/10 levels and renal function changes in the glomerular basement membrane,increased the expression of IGF1 and IGF1R.IGF1R interacted with CHK2,and the expression of p-CHK2 was significantly decreased in IGF1R-knockdown cells.When cisplatin was used to induce DNA damage,the expression of p-CHK2 was higher than that in the IGF1R-knockdown group without cisplatin treatment.HUcMSC infusion ameliorated abnormalities and preserved kidney structure and function in DM rats.The expression of IGF1,IGF1R,p-CHK2,and p-p53,and the level of 8-OHdG in the DM group increased significantly compared with those in the control group,and decreased after HUcMSC treatment.Our results suggested that IGF1R could interact with CHK2 and mediate DNA damage.HUcMSC infusion protected against kidney injury in DM rats.The underlying mechanisms may include HUcMSC-mediated enhancement of diabetes treatment via the IGF1R-CHK2-p53 signalling pathway.