Vertebral refracture following percutaneous vertebral augmentation (PVA) is commonly seen in elderly patients with osteoporotic thoracolumbar compression fractures (OTLCF). It can lead to recurrent pain, loss of vertebral height, progression of kyphosis, and even neurological dysfunction, significantly impairing patients′ quality of life. Current diagnosis and treatment face multiple challenges, including high misdiagnosis rate, difficulty in choosing between surgical and non-surgical treatment options, lack of standardized surgical protocols, interference from intralesional bone cement during procedures, inadequate stability of internal fixation in osteoporotic bone, and suboptimal compliance of anti-osteoporotic therapy. Establishing a standardized diagnostic and therapeutic framework is urgently needed. To standardize the management process and improve outcomes for vertebral refractures after PVA in elderly OTLCF patients, Spinal Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field to develop Guideline for the diagnosis and treatment of vertebral refracture after percutaneous vertebral augmentation in elderly patients with osteoporotic thoracolumbar compression fractures ( version 2025), based on current literature and clinical experience, and adhering to principles of scientific rigor and clinical applicability. A total of 11 recommendations were proposed, encompassing diagnosis, treatment, and rehabilitation of vertebral refracture after PVA in elderly patients with OTLCF, aiming to provide a foundation for a standardized management.

Acute symptomatic osteoporotic thoracolumbar compression fracture (ASOTLF) can lead to chronic low back pain, kyphosis deformity, pulmonary dysfunction, loss of mobility, and even life-threatening complications. Vertebral augmentation is currently the mainstream treatment method for this condition. In 2019, the Editorial Board of Chinese Journal of Trauma and the Spinal Trauma Group of Orthopedic Surgeons Branch of Chinese Medical Doctor Association collaboratively led the development of Clinical guideline for vertebral augmentation for acute symptomatic osteoporotic thoracolumbar compression fractures. Six years later, with advances in clinical diagnosis and treatment techniques as well as accumulating evidence in related fields, the 2019 guideline requires updating. To this end, the Spinal Trauma Group of Orthopedic Surgeons Branch of Chinese Medical Doctor Association, the Spinal Health Professional Committee of China Human Health Science and Technology Promotion Association, and the Minimally Invasive Orthopedics Professional Committee of Shaanxi Medical Doctor Association have organized experts in the field to develop the Clinical guideline for vertebral augmentation of acute symptomatic osteoporotic thoracolumbar compression fractures ( version 2025) , based on the latest evidence-based medical researches. This guideline incorporates 3 recommendations retained from the 2019 version with updated strength of evidence, along with 12 new recommendations. It provides recommendations from six aspects of diagnosis, pain management, treatment option selection, prevention of postoperative complications, anti-osteoporosis therapy, and postoperative rehabilitation, aiming to provide a reference for standard treatment of vertebral augmentation for ASOTLF in hospitals at all levels.

BACKGROUND:The plantarflexor weakness is a common muscle defect in patients with spastic cerebral palsy and Charcot-Marie-Tooth,which clinically manifests abnormal gaits,and the relationship between plantarflexor weakness and abnormal gaits is unclear. OBJECTIVE:To explore the biomechanical behavior of the lower limb under the action of a single factor of plantarflexor weakness to reveal the mechanism of abnormal gait induced by plantarflexor weakness and to provide guidance for the rehabilitation training of patients with plantarflexor weakness. METHODS:A predictive framework of musculoskeletal multibody dynamics in the sagittal plane was established based on OpenSim Moco to predict lower limb joint angles and muscle activation changes during walking in normal subjects.The validity of the framework was verified by combining the inverse kinematics and electromyogram activation time of the experimental data.Reduced isometric muscle forces were used to model plantarflexor weakness and to compare predicted lower extremity joint angles,joint moments,and muscle energy expenditure with normal subjects to analyze the effects of plantarflexor weakness on lower extremity biomechanics. RESULTS AND CONCLUSION:(1)The Moco-based prediction framework realistically predicted the biomechanical changes of the lower limbs during walking in normal subjects(joint angles:normalized correlation coefficient≥0.73,root mean square error≤7.10°).(2)The musculoskeletal model used a small stride support phase to increase the"heel-walking"gait during plantarflexor weakness.When the plantarflexor weakness reached 80%,the muscle energy expenditure was 5.691 4 J/kg/m,and the maximum activation levels of the gastrocnemius and soleus muscles were 0.72 and 0.53,which might cause the plantarflexor weakness patients to be more prone to fatigue when walking.(3)Muscle energy expenditure was significantly higher when the weakness of plantarflexors exceeded 40%,and the joint angles and moments of the lower limbs deteriorated significantly when the weakness of plantarflexors exceeded 60%,suggesting that there may be a"threshold"for the effect of plantarflexor weakness on gait,which may correspond to the point at which health care professionals should intervene in the clinical setting.

BACKGROUND:The pelvis has abundant trabecular bone content,but the ability of conventional sacroiliac percutaneous fixation to control trabecular bone is limited,leading to fixation failure.Therefore,the development of devices that can more effectively control trabecular bone tension is of significant importance.OBJECTIVE:The mechanical properties of a novel sacroiliac tension screw were investigated using biomechanical testing and numerical modeling analysis,along with an assessment of the reliability of the pull-out force numerical model.METHODS:A mechanical model was established based on the working principle of the novel sacroiliac tension screw.Numerical methods were employed to analyze its pull-out performance,validated through mechanical testing with polyurethane material to assess the reliability of the pull-out force numerical model.Using pelvic specimens,the mechanical effectiveness of the novel sacroiliac tension screw in repairing sacroiliac joint injuries was analyzed under normal standing posture,along with an evaluation of the load stiffness of different pelvic models in the standing position.RESULTS AND CONCLUSION:(1)The average error between the computed values of the numerical model and the measured values was 13.19％,indicating a certain level of validity for the numerical model.(2)The damage to the polyurethane material after the extraction of the screw was less pronounced in the novel screw group.(3)The average effective holding displacement for the novel screw was approximately(9.24±0.27)mm,significantly greater than the average displacement of(1.71±0.57)mm observed with the lag screws.However,the maximum resistance to pullout for the lag screws was significantly higher than that for the novel screws.(4)The novel screw effectively repaired sacroiliac joint injuries.(5)The stiffness after repair of sacroiliac joint injuries was equivalent when using a single novel screw compared to using two lag screws.(6)These results prove that the theoretical model for the maximum resistance to pullout of the screws established in this study has a certain level of validity and can guide the design of them with improved mechanical performance.The novel sacroiliac spiral blade screw can effectively hold trabecular bone and has practical clinical utility.

BACKGROUND:The pelvis has abundant trabecular bone content,but the ability of conventional sacroiliac percutaneous fixation to control trabecular bone is limited,leading to fixation failure.Therefore,the development of devices that can more effectively control trabecular bone tension is of significant importance.OBJECTIVE:The mechanical properties of a novel sacroiliac tension screw were investigated using biomechanical testing and numerical modeling analysis,along with an assessment of the reliability of the pull-out force numerical model.METHODS:A mechanical model was established based on the working principle of the novel sacroiliac tension screw.Numerical methods were employed to analyze its pull-out performance,validated through mechanical testing with polyurethane material to assess the reliability of the pull-out force numerical model.Using pelvic specimens,the mechanical effectiveness of the novel sacroiliac tension screw in repairing sacroiliac joint injuries was analyzed under normal standing posture,along with an evaluation of the load stiffness of different pelvic models in the standing position.RESULTS AND CONCLUSION:(1)The average error between the computed values of the numerical model and the measured values was 13.19％,indicating a certain level of validity for the numerical model.(2)The damage to the polyurethane material after the extraction of the screw was less pronounced in the novel screw group.(3)The average effective holding displacement for the novel screw was approximately(9.24±0.27)mm,significantly greater than the average displacement of(1.71±0.57)mm observed with the lag screws.However,the maximum resistance to pullout for the lag screws was significantly higher than that for the novel screws.(4)The novel screw effectively repaired sacroiliac joint injuries.(5)The stiffness after repair of sacroiliac joint injuries was equivalent when using a single novel screw compared to using two lag screws.(6)These results prove that the theoretical model for the maximum resistance to pullout of the screws established in this study has a certain level of validity and can guide the design of them with improved mechanical performance.The novel sacroiliac spiral blade screw can effectively hold trabecular bone and has practical clinical utility.

Objective To conduct the biomechanical analysis on a new power-assisted knee orthosis.Methods A self-force source power-assisted knee orthosis was used,and four motions(level walking,sitting and standing,ascending and descending stairs)were measured before and after wearing the orthosis.A musculoskeletal multibody dynamic model was adopted to calculate the joint angles and pressures at the knee,patellofemoral and hip joints.The effects of power-assisted knee orthosis on biomechanical changes of lower limbs were investigated by comparing the joint angles and pressures before and after wearing this orthosis.Results The orthosis would reduce the knee angles during level walking,as well as the knee pressures during sitting and standing on the wearing side.Wearing the orthosis did not significantly affect the joint angles during sitting and standing;however,it led to a significant decrease in joint pressures at both bilateral knee joints and patellofemoral joints.During ascending and descending stairs,the knee angle change on the wearing side was opposite to that on the non-wearing side.The increase of the peak knee angle was(14.3±3.6)%on the non-wearing side during ascending stairs.Conclusions The power-assisted knee orthosis can offer a conservative treatment for individuals with various knee diseases by reducing joint angles and pressures in daily motions.

Objective To conduct the biomechanical analysis on a new power-assisted knee orthosis.Methods A self-force source power-assisted knee orthosis was used,and four motions(level walking,sitting and standing,ascending and descending stairs)were measured before and after wearing the orthosis.A musculoskeletal multibody dynamic model was adopted to calculate the joint angles and pressures at the knee,patellofemoral and hip joints.The effects of power-assisted knee orthosis on biomechanical changes of lower limbs were investigated by comparing the joint angles and pressures before and after wearing this orthosis.Results The orthosis would reduce the knee angles during level walking,as well as the knee pressures during sitting and standing on the wearing side.Wearing the orthosis did not significantly affect the joint angles during sitting and standing;however,it led to a significant decrease in joint pressures at both bilateral knee joints and patellofemoral joints.During ascending and descending stairs,the knee angle change on the wearing side was opposite to that on the non-wearing side.The increase of the peak knee angle was(14.3±3.6)%on the non-wearing side during ascending stairs.Conclusions The power-assisted knee orthosis can offer a conservative treatment for individuals with various knee diseases by reducing joint angles and pressures in daily motions.

Vertebral refracture following percutaneous vertebral augmentation (PVA) is commonly seen in elderly patients with osteoporotic thoracolumbar compression fractures (OTLCF). It can lead to recurrent pain, loss of vertebral height, progression of kyphosis, and even neurological dysfunction, significantly impairing patients′ quality of life. Current diagnosis and treatment face multiple challenges, including high misdiagnosis rate, difficulty in choosing between surgical and non-surgical treatment options, lack of standardized surgical protocols, interference from intralesional bone cement during procedures, inadequate stability of internal fixation in osteoporotic bone, and suboptimal compliance of anti-osteoporotic therapy. Establishing a standardized diagnostic and therapeutic framework is urgently needed. To standardize the management process and improve outcomes for vertebral refractures after PVA in elderly OTLCF patients, Spinal Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field to develop Guideline for the diagnosis and treatment of vertebral refracture after percutaneous vertebral augmentation in elderly patients with osteoporotic thoracolumbar compression fractures ( version 2025), based on current literature and clinical experience, and adhering to principles of scientific rigor and clinical applicability. A total of 11 recommendations were proposed, encompassing diagnosis, treatment, and rehabilitation of vertebral refracture after PVA in elderly patients with OTLCF, aiming to provide a foundation for a standardized management.

Acute symptomatic osteoporotic thoracolumbar compression fracture (ASOTLF) can lead to chronic low back pain, kyphosis deformity, pulmonary dysfunction, loss of mobility, and even life-threatening complications. Vertebral augmentation is currently the mainstream treatment method for this condition. In 2019, the Editorial Board of Chinese Journal of Trauma and the Spinal Trauma Group of Orthopedic Surgeons Branch of Chinese Medical Doctor Association collaboratively led the development of Clinical guideline for vertebral augmentation for acute symptomatic osteoporotic thoracolumbar compression fractures. Six years later, with advances in clinical diagnosis and treatment techniques as well as accumulating evidence in related fields, the 2019 guideline requires updating. To this end, the Spinal Trauma Group of Orthopedic Surgeons Branch of Chinese Medical Doctor Association, the Spinal Health Professional Committee of China Human Health Science and Technology Promotion Association, and the Minimally Invasive Orthopedics Professional Committee of Shaanxi Medical Doctor Association have organized experts in the field to develop the Clinical guideline for vertebral augmentation of acute symptomatic osteoporotic thoracolumbar compression fractures ( version 2025) , based on the latest evidence-based medical researches. This guideline incorporates 3 recommendations retained from the 2019 version with updated strength of evidence, along with 12 new recommendations. It provides recommendations from six aspects of diagnosis, pain management, treatment option selection, prevention of postoperative complications, anti-osteoporosis therapy, and postoperative rehabilitation, aiming to provide a reference for standard treatment of vertebral augmentation for ASOTLF in hospitals at all levels.