ObjectiveTo explore the changes in volatile components， total polysaccharides， enzyme activity， and chromaticity value of Myristicae Semen Koji（MSK） during the fermentation process， and conduct correlation analysis. MethodsBased on gas chromatography-mass spectrometry（GC-MS）， the changes of volatile components in MSK at different fermentation times were identified. The phenol sulfuric acid method， dinitrosalicylic acid method（DNS）， and carboxymethyl cellulose sodium salt method（CMC-Na） were used to investigate the total polysaccharide content， amylase activity， and cellulase activity during the fermentation process. Visual analysis technology was used to explore the changes in chromaticity values， revealing the fermentation process of MSK and the dynamic changes of various measurement indicators， partial least squares-discriminant analysis（PLS-DA） was used to explore the differential compounds of MSK at different fermentation degrees， and Pearson correlation analysis was used to explore the correlation between volatile components of MSK and total polysaccharides， enzyme activity， and chromaticity values. ResultsA total of 60 volatile compounds were identified from MSK， the relative contents of components such as （+）-α-pinene， β-phellandrene， β-pinene， （+）-limonene， and p-cymene obviously increased， while the relative contents of components such as safrole， methyl isoeugenol， methyleugenol， myristicin， and elemicin significantly decreased. During the fermentation process， the total polysaccharide content showed an upward trend， while the activities of amylase and cellulase showed an initial increase followed by a decrease， and reached their maximum value at 40 h. the overall brightness（L^*） and total color difference（ΔE^*） gradually increased， while the changes in red-green value（a^*） and yellow-blue value（b^*） were not obvious. PLS-DA results showed that MSK could be clearly distinguished at different fermentation times， and 13 differential biomarkers were screened out. Pearson correlation analysis results showed that the contents of α-terpinene， β-phellandrene， methyleugenol， β-cubebene and myristic acid had an obvious correlation with chromaticity values. ConclusionAfter fermentation， the volatile components， total polysaccharides， amylase activity， and cellulase activity of MSK undergo significant changes， and there is a clear correlation between them and chromaticity values， which reveals the dynamic changes in the fermentation process and related indicators of MSK， laying a foundation for the quality control.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

ObjectiveTo observe the clinical effectiveness and safety of Xiaozhong Zhitong Mixture （消肿止痛合剂） combined with antibiotic bone cement in the treatment of diabetic foot ulcer （DFU） with damp-heat obstructing syndrome. MethodsA total of 72 DFU patients with damp-heat obstructing syndrome were randomly assigned to treatment group （36 cases） and the control group （36 cases）. Both groups received standard treatment and topical antibiotic bone cement for ulcer wounds， while the treatment group received oral Xiaozhong Zhitong Mixture （50 ml per time， three times daily） in additionally. Both groups underwent daily wound dressing changes for 21 consecutive days. Ulcer healing rate， serum levels of tumor necrosis factor-alpha （TNF-α）， interleukin-1 beta （IL-1β）， malondialdehyde （MDA）， superoxide dismutase （SOD）， C-reactive protein （CRP）， and white blood cell （WBC） count were observed before and after treatment， and visual analog scale （VAS） scores for wound pain， traditional Chinese medicine （TCM） syndrome scores， and the DFU Healing Scale （DMIST scale） were also compared. Liver and kidney function were evaluated before and after treatment， and adverse events such as allergic reactions， worsening ulcer pain were recorded. ResultsTotally 35 patients in the treatment group and 33 in the control group were included in the final analysis. The ulcer healing rate in the treatment group was （87.93±9.34）%， significantly higher than （81.82±12.02）% in the control group （P = 0.035）. Compared to pre-treatment levels， both groups showed significant reductions in serum CRP， WBC， MDA， IL-1β， and TNF-α levels， with an increase in SOD level （P＜0.05）. TCM syndrome scores， VAS， and DMIST scores also significantly decreased in both groups （P＜0.05）， with greater improvements in the treatment group （P＜0.05）. No significant adverse reactions were observed in either group during treatment. ConclusionXiaozhong Zhitong Mixture combined with antibiotic bone cement has significant advantages in promoting DFU healing， reducing inflammatory response， and alleviating oxidative stress in DFU patients with damp-heat obstructing syndrome， with good safety for DFU patients with damp-heat obstructing syndrome.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective To investigate the impact of osteotomy mode on the callus morphology in the ex-tension area of tibial bone transfer and its efficacy.Methods The information of the patients with bone defect treated in 910 Hospital of Joint Logistics and Security Force of Chinese People's Liberation Army from May 2016 to June 2022 was collected.By comparing the general data of the patients with different osteotomy meth-ods(minimally invasive osteotomy group,subperiosteal osteotomy group and extraperiosteal osteotomy group),callus morphology in the extension area(sunken type,uniform type and protruding type),healing in-dex,Ilizarov Method Research and Application Society(ASAMI)bone healing and functional evaluation and other information,the curative effect differences of different osteotomy methods on tibial bone transfer were investigated.Results The incidence rate of sunken type of callus in the extension area was 15.8%in the mini-mally invasive osteotomy group,18.9%in the subperiosteal osteotomy group,and 14.3%in the extraperioste-al osteotomy group,with statistically significant differences among the three groups(P<0.05);in which,the incidence of sunken type of callus in the minimally invasive osteotomy group was lower than that in the subpe-riosteal osteotomy group(χ2=10.178,P=0.005),but there was no statistically significant difference when compared to the extraperiosteal osteotomy group(χ2=0.102,P=0.814),the difference betrrween the extra-periosteal osteotomy group and subperiosteal osteotomy group also had no statistical difference(χ2=0.084,P=0.772).The incidence rate of uniform type of callus in the minimally invasive osteotomy group was lower than that in the subperiosteal osteotomy group(χ2=6.579,P=0.013),but there was no statistically signifi-cant difference when compared to the extraperiosteal osteotomy group(χ2=0.443,P=0.506).The difference in the subperiosteal osteotomy group and extraperiosteal osteotomy group also had no statistically significant(χ2=2.602,P=0.107).The incidence rate of protruding type of callus in the minimally invasive osteotomy group was higher than that in the subperiosteal osteotomy group(χ2=9.795,P=0.002),and the incidence rate of protruding type of callus in the extraperiosteal osteotomy group was higher than that in the subperios-teal osteotomy group(χ2=5.170,P=0.023),however,there was no statistically significant difference be-tween the minimally invasive osteotomy group and the extraperiosteal osteotomy group(χ2=0.308,P=0.579).There were no statistically significant differences in healing index,ASAMI scores,contact point non-union,pin tract infection and refracture incidence rate rates among the three groups(P>0.05).Conclusion Sub-periosteal osteotomy in the single plane tibial bone moving does not show the expected results in favor of the extension area mineralization,on the contrary,extraperiosteal osteotomy has the similar clinical efficacy to minimally invasive osteotomy.

In orthodontic treatment for protrusion,premolar extraction is a common option.The extraction spaces are closed by the re-ciprocal movement of posterior and anterior teeth.However,the unclear question is,after extracting the first or second premolars in the maxilla or mandible,what amount is the"anchorage loss"(mesial movement)of the molars when the spaces closed using intra-arch re-ciprocal anchorage only.We reviewed a large number of clinical studies on orthodontic treatment involving the extraction of premolars to investigate the factors related to molar anchorage loss.Existing studies have explored the influence of physiological factors such as age,occlusal relationship,and vertical facial profile,as well as treatment factors such as tooth extraction site,appliance system,and gap closure method on the molar anchorage loss in orthodontic cases involving the extraction of premolars.The reported molar anchorage loss under different conditions has certain reference value for the orthodontic extraction plan making and anchorage design.More high-quality clinical studies are needed to further clarify this important clinical issue in the future.

Objective To isolate the Japanese encephalitis virus carried by Culex tritaeniorhynchus in Dongchuan District of Yunnan Province and analyze its molecular characteristics, so as to provide insights into the prevention and control of Japanese encephalitis in Yunnan Province. Methods Mosquito specimens were collected using mosquito-trapping lamps from pig farms in Batang Village and Xiaoxin Village, Dongchuan District, Kunming City, Yunnan Province in July 2016, and the mosquito species was identified according to the mosquito morphology. Then, 60 to 100 mosquitoes of each species served as a group and were ground. Baby hamster kidney-21 (BHK-21) cells and Aedes albopictus clone C6/36 cells were used for virus isolation, and positive isolates were identified using flavivirus primers. The positive isolates were amplified using reverse transcription polymerase chain reaction (RT-PCR) assay with 15 pairs of specific primers covering the full length of the genotype I Japanese encephalitis virus, and DNA sequence assembly was performed using the software SeqMan in the DNASTAR package. The obtained sequences were aligned with the complete sequences of 38 Japanese encephalitis virus downloaded from the GenBank with the software MegAlign, and the nucleotide and amino acid homology analyses of the obtained sequences were performed. The difference in amino acid sites was analyzed with the software GeneDoc, and phylogenetic trees were created based on the sequences of the coding region and E protein of the isolated Japanese encephalitis virus with the software Mega X. In addition, the secondary and tertiary structures of the E protein of the Japanese encephalitis virus were predicted using the online tool SOPMA and the software Swiss-Model. Results A total of 5 820 mosquitoes were collected and 3 843 Cx. tritaeniorhynchus (66.03%) were identified according to the mosquito morphology. A positive virus isolate, termed YNDC55-33, was isolated from Cx. tritaeniorhynchoides following batches of virus isolation from mosquito specimens, and cytopathic effect was observed following inoculation into BHK-21 and C6/36 cells. The YNDC55-33 virus isolate was successfully amplified with the flavivirus primes, and a long sequence containing 300 nucleotides was obtained. Following sequence alignment using the BLAST tool, the sequence of the YNDC55-33 virus isolate had high homology with that of the genotype I Japanese encephalitis virus. A long sequence with 10 845 nucleotides in length, which encoded 3 432 amino acids, was obtained by splicing the full sequence of the YNDC55-33 virus isolate. Phylogenetic analysis based on the whole-genome sequence and E gene sequence of the YNDC55-33 virus isolate showed that the new YNDC55-33 virus isolate was most closely related to the genotype I Guizhou isolate (GenBank accession number: HM366552), with nucleotide homology of 98.5% and amino acid homology of 99.4%, and the YNDC55-33 virus isolate shared 97.96% ± 0.33% nucleotide homology and 99.35% ± 0.08% amino acid homology with other genotype I Japanese encephalitis virus isolates, and < 90% nucleotide homology and < 98% amino acid homology with other genotypes of Japanese encephalitis virus. The YNDC55-33 virus isolate and the live attenuated virus vaccine candidate SA14-14-2 isolate differed at 16 amino acid sites on E gene, and 7 out of 8 key amino acid sites related to neurovirulence. The secondary and tertiary structures of the E protein of the YNDC55-33 virus isolate were predicted to be characterized by random coils. Conclusions A genotype I Japanese encephalitis virus was isolated from Cx. tritaeniorhynchus in Dongchuan District, Kunming City. This virus isolate and the live attenuated virus vaccine candidate SA14-14-2 isolate does not differ at antigenic epitopes-related key amino acid sites, and the major protein structure of the virus isolate is random coils. This study adds new data for the epidemiological distribution of Japanese encephalitis virus in Yunnan Province, which may provide insights into the prevention and control of Japanese encephalitis in the province.