Objective:To investigate the early effect of repairing acetabular cartilage delamination with absorbable anchor under hip arthroscopy compared with conventional non-intervention.Methods:Retrospective cohort study was adopted. There were 24 Femoroacetabular Impingment (FAI) patients with acetabular cartilage delamination (ACD) receiving hip arthroscopy surgery in Peking University Third Hospital from May 2021 to August 2021. There were 14 males and 10 females with an average age of 36.3±7.2 years (range 23-53 years). There were 12 patients receiving acetabular cartilage repair with absorbable anchor (absorbable anchor group), and 12 patients in non-intervention group. The X-ray film indicators, α angle, lateral center edge angle (LCEA) and MRI measurement (acetabular cartilage gap, CG) were compared between the two groups. The pre- and post-operative hip functions were assessed by modified Harris Hip Score (mHHS), 12-item international hip outcome tool (iHOT12), hip outcome score-activities of daily living subscale (HOS-ADL), and hip outcome score-sports subscale (HOS-SS), along with visual analogue scale (VAS). The complications (infection, lower extremity deep venous thrombosis) were followed up, as well as the revisional hip arthroscopy surgery and total hip replacement surgery.Results:A total of 24 patients were followed up for 12.0±1.2 months (range 10-14 months). There was no significant difference between the two groups for age, BMI, and symptom onset time ( P>0.05). There was no significant difference between the two groups for the pre-operative α angle, LCEA, CG, mHHS, iHOT12, HOS-ADL, HOS-SS, and VAS scores ( P>0.05). At the last follow-up, there was no significant difference between the two groups for the α angle, LCEA, CG, mHHS, iHOT12, HOS-ADL, HOS-SS, VAS and satisfaction ( P>0.05). In the absorbable anchor group, the α angle was 47.2°±2.6° vs. 63.4°±3.3°, CG was 3.0±0.7 mm vs. 3.3±0.6 mm; mHHS was 73.6±16.0 vs. 57.7±15.4; iHOT12 was 67.6±22.5 vs. 50.6±15.0 after and before the surgery, with significant improvement ( P<0.05). As for the non-intervention group, there was significant decrease of post-operative α angle of 47.4°±2.6° compared to the pre-operative angle of 58.4°±8.1° ( P<0.05). There was no significant difference in LCEA, CG, mHHS, iHOT12, HOS-ADL, HOS-SS, and VAS scores before and after the surgery in non-intervention group comparison ( P>0.05). No complications, revision hip arthroscopy surgery or total hip replacement surgery occurred during the follow up. Conclusion:Good effect was yielded for absorbable anchor repairing acetabular cartilage delamination under hip arthroscopy, without additional risk of complications or revision surgery.

Objective: To investigate the effects of the interaction between occupational noise exposure and arterial stiffness on blood glucose, so as to provide insights into for early prevention of diabetes among workers exposed to occupational noise. Methods: A total of 518 noise workers were selected from a tobacco plant in Wuhan City. Participants' gender, age and work duration were collected using questionnaire surveys, and participants' height and weight were measured. Blood glucose and arterial stiffness were detected, and the noise intensity was measured in working environments with a personal noise dosimeter. The effects of occupational noise exposure, arterial stiffness and their interactions on blood glucose were examined using a multiple linear regression model. Results: A total of 518 workers were included, with 398 males (76.83%), a mean age of (40.85±10.68) years, a mean working age of (19.50±12.69) years, a mean body mass index of (23.66±3.31) kg/m2, and a mean blood glucose level of (5.15±0.99) mmol/L. There were 247 workers with occupational noise exposure (47.68%) and 175 workers with arterial stiffness (33.78%). Multiple linear regression analysis showed significant associations of noise (β'=0.112) and arterial stiffness (β'=0.168) with blood glucose, and there was an additive interaction between noise and arterial stiffness on blood glucose (β'=0.314). Conclusion The interaction between occupational noise and arterial stiffness affects blood glucose.

The composite material PLGA compounded with β-tricalcium phosphate (β-TCP) was prepared by melt blending method, and the absorbable interface screw was prepared by injection molding process. Prepare PBS buffer that simulates human body, conduct in vitro degradation experiments on interface screws according to relevant national and industry standards, then test and characterize interface screws at different time points for degradation of intrinsic viscosity, average molecular weight distribution, mass loss, mechanical properties and thermal properties. According to the degradation performance-time curve, determine the time node at which the interface screw loses the mechanical properties. In this paper, the in vitro degradation behavior of interfacial screws prepared from PLGA and β-TCP composites was studied in detail, providing a reference and basis for the degradation behavior of absorbable products prepared from PLGA and β-TCP composites.
Humans ; Polyesters ; Materials Testing ; Calcium Phosphates ; Absorbable Implants

Objective: To investigate the thyroid functions and influencing factors among radiation workers in Wuhan City, so as to provide insights into occupational health monitoring among radiation workers. Methods : Radiation workers receiving physical examinations in Wuhan Prevention and Treatment Center for Occupational Diseases from January to October 2022 were enrolled, and participants' gender, age, smoking, alcohol consumption, medical history, medication use, types of occupational radiation and work duration were collected. Triiodothyronine (TT3), thyroxine (TT4), free thyroxine (FT4), free triiodothyronine (FT3) and thyroid stimulating hormone (TSH) were measured using a magnetic microparticle-based chemiluminescence immunoassay. Personnel dose equivalent was monitored using thermoluminescent dosimetry, and annual cumulative radiation dose was estimated. Factors affecting thyroid function were identified using a multivariable linear regression model. Results: Totally 978 radiation workers were recruited, with a median age of 32.00 (interquartile range, 10.00) years, and including 782 men (79.96%) and 196 women (20.04%). There were 246 smokers (25.15%), 257 workers with alcohol consumption (26.28%) and 489 with a history of radiation work (50.00%). The median annual cumulative radiation dose was 0.20 (interquartile range, 0.24) mSv. The percentage of abnormal thyroid function was 14.72%. Multivariable logistic regression analysis showed that women (OR=1.925, 95%CI: 1.061-3.490), history of radiation work (OR=2.810, 95%CI: 1.119-7.057) and involving in medical application (OR=1.915, 95%CI: 1.101-3.332) were associated with abnormal thyroid function. Conclusions The percentage of abnormal thyroid function was 14.72% among radiation workers in Wuhan City. History of exposure to ionizing radiation, types of occupational radiation and gender were main factors affecting thyroid function.

Objective:To analyze the tendency of incidence and mortality of mechanical injuries among Chinese residents from 1990 through 2019 and to estimate the age-period-cohort effect.Methods:Based on the Global Burden of Disease (GBD) 2019 database, the incidence and mortality data of mechanical injuries among Chinese residents from 1990 to 2019 were extracted. The trends of age-standardized incidence rate (ASIR) and age-standardized death rate (ASDR) of mechanical injuries among Chinese residents by gender was analyzed using the joinpoint regression model, and the annual percent change (APC) and average annual percent change (AAPC) were calculated. The age-period-cohort model was used to quantitatively assess the effects of age, period, and cohort on ASIR and ASDR for mechanical injuries.Results:① Overall tendency: from 1990 to 2019, the ASIR of mechanical injuries showed an increasing trend (540.95/100 000 in 1990 vs. 815.34/100 000 in 2019), and the ASDR first increased slightly and then decreased (2.62/100 000 in 1990 vs. 2.87/100 000 in 2005 vs. 1.77/100 000 in 2019) among Chinese residents. During the observation period, ASIR and ASDR for mechanical injuries of male were higher than female. ② Joinpoint regression model analysis showed that the ASIR of mechanical injuries had a fluctuating trend of increasing first and then decreasing and then rising rapidly among Chinese residents from 1990 to 2019 (AAPC = 1.42%, t = 9.59, P < 0.001). The ASIR of the Chinese male showed a slight decrease and then continued to increase (AAPC = 1.47%, t = 8.72, P < 0.001), while the ASIR of the Chinese female showed a rapid rising at first, then rapidly declining and then rising again (AAPC = 1.31%, t = 12.11, P < 0.001). From 1990 to 2019, the ASDR of mechanical injuries showed a fluctuating downward trend of first decreasing, then increasing, and then rapidly decreasing among Chinese residents (AAPC = -1.39%, t = -6.72, P < 0.001). The decrease rate of ASDR among male was as same as that among all population (AAPC = -1.44%, t = -7.29, P < 0.001), but the decrease rate of ASDR in female was relatively slow (AAPC = -1.08%, t = -4.54, P < 0.001). ③ Age-period-cohort model analysis showed that, with the increase of age, the risk of mechanical injuries among the overall population, male and female in China increased, then decreased, and then increased rapidly. The first small peak was at the age of 45-49 years old in male and 65-69 years old in female. The overall death risk showed an increasing trend with age, with a slowly increasing trend before 75 years old, and a sudden increase after 75 years old. The peak age of death risk was between 90 and 94 years. In terms of period effect, the risk of mechanical injuries showed a gradually increasing trend with time among the overall population, male, and female in China, and the risk of death showed a trend of decreasing first and then rapidly increasing and then decreasing. In terms of cohort effect, the risk of mechanical injuries among the overall population, male, and female in China showed a gradual upward trend with the increase in the birth year, and the risk of death showed an M-shaped trend. Conclusions:From 1990 to 2019, the incidence of mechanical injuries showed an increasing trend, and the mortality increased first and then decreased. Although the disease burden has improved, it is still high. More attention needs to be paid to the prevention and control of mechanical injuries, especially in the young population.

Objective    To explore the efficacy of artificial intelligence (AI) detection on pulmonary nodule compared with multidisciplinary team (MDT) in regional medical center. Methods    We retrospectively analyzed the clinical data of 102 patients with lung nodules in the Xiamen Fifth Hospital from April to December 2020. There were 57 males and 45 females at age of 36-90 (48.8±11.6) years. The preoperative chest CT was imported into AI system to record the detected lung nodules. The detection rate of pulmonary nodules by AI system was calculated, and the sensitivity, specificity of AI in the different diagnosis of benign and malignant pulmonary was calculated and compared with manual film reading by MDT. Results    A total of 322 nodules were detected by AI software system, and 305 nodules were manually detected by physicians (P<0.05). Among them, 113 pulmonary nodules were diagnosed by pathologist. Thirty-eight of 40 lung cancer nodules were AI high-risk nodules, the sensitivity was 95.0%, and 25 of 73 benign nodules were AI high-risk nodules, the specificity was 65.8%. Lung cancer nodules were correctly diagnosed by MDT, but  benign nodules were still considered as  lung cancer at the first diagnosis in 10 patients. Conclusion    AI assisted diagnosis system has strong performance in the detection of pulmonary nodules, but it can not content itself with clinical needs in the differentiation of benign and malignant pulmonary nodules. The artificial intelligence system can be used as an auxiliary tool for MDT to detect pulmonary nodules in regional medical center.

OBJECTIVE：To prepare Brucine （shorted for “Bru”）bilayer polymer soluble microneedles ，and to investigate their in vitro transdermal permeation characteristics under different drug loading modes. METHODS ：Taking the degree of difficulty of microneedle film uncovering ，array integrity ，bubble amount ，needle shape ，tip hardness and backing toughness as the indexes ， tip and backing materials were screened. The swelling method and drying method of matrix were screened using the morphology of microneedles as index. The double-layer polymer soluble microneedle was prepared by two-step method ，then it was characterized and evaluated in the safety. The in vitro transdermal permeation characteristics of tip-loaded ，backing-loaded and full-loaded Bru bilayer polymer soluble microneedles were investigated by Franz diffusion cell. The in vitro skin penetration curve was drawn ，and the cumulative permeability amount （Q）and cumulative permeability rate were calculated. RESULTS ：The optimal preparation technology of bilayer polymer soluble microneedles included chondroitin sulfate （CS）and polyvinylpyrrolidone K 30（PVP K 30） （1∶1，m/m）as tip materials ，15％ polyvinyl alcohol （PVA）as backing material ，matrix swelling in the refrigerator at 4 ℃ for 1 h，and drying at room temperature for 24 h in dryer. Prepared microneedle array was complete and had good mechanical properties，and could successfully puncture aluminum foil and rat skin. After microneedle treatment ，the skin could return to its original state within 6 h. The results of in vitro transdermal test showed that microneedle drug delivery could greatly increase the cumulative transdermal permeability amount of GNYL Bru，and the tip material could dissolve and release the drug within 10 min； the tip-loaded microneedle was basically released within 8 h，Q8h was 102.185 μg/cm2 and the cumulative permeability rate reached 94.05％ ； the drug cumulativepermeability rate of backing-loaded and full-loaded microneedlesexceeded 50％ within 8 h and exceeded 90％ within 48 h；Q48h were 840.77 and 1 156.73 μg/cm2，showing sustained-release characteristics. CONCLUSIONS ：Bru bilayer polymer soluble microneedles with hard tip and tough backing material are successfully prepared to achieve effective transdermal delivery and sustained release through full-loaded mode.

OBJECTIVE: To compare the applicability of three semi-quantitative methods for risk assessment for occupational health in a mechanic processing enterprise. METHODS: The judgment sampling method was used to select a mechanic processing enterprise as the study subject. The occupational health risk was evaluated using contact ratio, exponential and comprehensive exponential analyzing method, and the results of different methods were compared. RESULTS: The occupational health risk level of all the posts in sandblasting, sawing, welding, grinding and painting in the mechanic processing enterprises were of moderate risk or above. The consistency of evaluation results of the contact ratio, exponential and comprehensive exponential methods was poor(weighted Kappa=0.30, P>0.05). The consistency of exponential and comprehensive exponential methods was excellent(weighted Kappa=1.00, P<0.01). When the contact concentration(E)/occupational exposure limits(OEL) is <0.50, the contact ratio method is less than or equal to the exponential method and the comprehensive exponential method. When 0.50 ≤E/OEL<2.00, the results of these three methods are consistent. When the E/OEL ≥2.00, the evaluation result of the contact ratio method is equal to or higher than the exponential method and the comprehensive exponential method.CONCLUSION: The contact ratio method is easy to obtain, simple and convenient. The exponential method is suitable for occupational disease risk factors in the workplace without OELs or unable to obtain test data, and it is more practical. The comprehensive exponential method is considered comprehensive and suitable for occupational health risk assessment in the workplace.

Objective:To provide references for accelerated development of novel coronavirus vaccines.Methods:Based on the Cortellis database, we analyzed and summarized the current research and development situation and technology layout of global coronavirus vaccines by searching the development status, technical route, clinical trials, and patents of global coronavirus vaccines in this article.Results:There are eighty-seven kinds of coronavirus vaccines under development in the world, mainly for 8 indications; among them, recombinant viral vector vaccines, protein subunit vaccines, and nucleic acid vaccines are widely used. There are 38 clinical trials, and most of them are at early-phase. The types of patents are mainly macromolecule product, biotechnological therapy, formulation, drug discovery and screening, and process.Conclusions:This comprehensive analysis of the development situation and technical layout of coronavirus vaccines will provide references and assistance for the development of new coronavirus vaccines.

Objective To compare the graft maturity of the anterior cruciate ligament reconstruction using the oval-shaped tunnel technique and round-shaped tunnel technique by signal/noise quotient (SNQ) of MRI postoperatively.Methods Forty patients diagnosed as the anterior cruciate ligament rupture between August 2015 and June 2016 were included according to the inclusion and exclusion criteria.Patients were randomized into a round-shaped group and an oval-shaped group,undergoing traditional round-shaped tunnel and oval-shaped tunnel reconstruction of the anterior cruciate ligament respectively.One year postoperatively,the MRI was conducted,and three intra-articular regions of interest (ROI) were selected to compare the graft maturity by calculating SNQ.Results None of the forty patients experienced complications of bone tunnel blowout,graft getting through difficulties and neurological or vascular injuries.SNQ of the round-shaped group were 3.72 ± 2.29,significantly higher than that of the oval-shaped group(P＜0.001).Moreover,SNQ of proximal ROI and distal ROI of ovalshaped group were 1.97 ± 1.30 and 2.76 ± 1.75,significantly lower than the round-shaped group with proximal site of 3.53 ± 2.11(P=0.008) and distal site of 4.46 ± 2.28(P=0.012).Conclusion Comparing MRI signal intensity one year after the treatment,we have found the graft SNQ after oval-shaped tunnel reconstruction was lower than the round-shaped reconstruction,with better graft maturity.