Objective To investigate the sputum metabolic profiles of patients with occupational coal workers' pneumoconiosis (CWP) by an untargeted metabolomics method, and to identify relevant differential metabolic pathways and potential biomarkers. Methods A total of 12 male patients with stage Ⅰ CWP were selected as the CWP group, and 16 healthy male individuals were selected as the control group, using a judgmental sampling method. Sputum metabolites of individuals in both groups were detected to perform non-targeted metabolomic analysis using the ultra-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry. Differential metabolites (DMs) and their pathways were screened using principal component analysis, partial least squares discriminant analysis, and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis. Potential biomarkers were analyzed and identified via the receiver operating characteristic curve (ROC). Results There were apparent metabolic alterations observed in sputum of CWP patients compared with healthy controls. In the positive ion mode, a total of 42 DMs were identified in sputum from CWP patients, including 19 downregulated and 23 upregulated metabolites. In the negative ion mode, a total of 25 DMs were identified in sputum from CWP patients, including 16 downregulated and 9 upregulated metabolites. KEGG enrichment analysis of sputum from CWP patients showed that seven DMs pathways were enriched in ABC transporters, histidine metabolism, phenylalanine metabolism, arachidonic acid metabolism, linoleic acid metabolism, purine metabolism, and oxidative phosphorylation, involving 26 DMs. ROC analysis indicated that 16(R)-hydroxyarachidonic acid, pyrophosphate, and 2-hydroxyphenylacetate of these 26 DMs may serve as potential biomarkers for CWP. Conclusion Sputum metabolomic profiles were altered in CWP patients compared with healthy controls. The potential biomarkers of CWP prevention and treatment are 16(R)-hydroxyarachidonic acid, pyrophosphate, and 2-hydroxyphenylacetate.

Hypoxia and aberrant activation of epidermal growth factor receptor (EGFR) are considered important features of various malignancies. However, whether hypoxia can directly trigger EGFR activation and its clinical implications remain unclear. In this study, we demonstrated that in oral cancer, a typical hypoxic tumor, hypoxia can induce chronic but constitutive phosphorylation of wild-type EGFR in the absence of ligands. Oral cancer cell lines exhibit different EGFR phosphorylation responses to hypoxia. In hypoxic HN4 and HN6 cells, ubiquitination-mediated endocytosis, lysosomal sorting, and degradation lead to low levels of EGFR phosphorylation. However, in CAL-27 and HN30 cells, a novel HIF-1α-induced long noncoding RNA (lncRNA), EUDAL, can compete with the E3 ligase/adaptor complex c-Cbl/Grb2 for binding to EGFR, stabilizing phosphorylated EGFR (pEGFR) and resulting in sustained activation of EGFR and its downstream STAT3/BNIP3 signaling. STAT3/BNIP3-mediated autophagy leads to antitumor drug resistance. A high EUDAL/EGFR/STAT3/autophagy pathway activation predicts poor response to chemotherapy in oral cancer patients. Collectively, hypoxia can induce noncanonical ligand-independent EGFR phosphorylation. High EUDAL expression facilitates sustained EGFR phosphorylation in hypoxic tumor cells and leads to autophagy-related drug resistance.
Humans ; ErbB Receptors/metabolism* ; Mouth Neoplasms/pathology* ; RNA, Long Noncoding/genetics* ; Drug Resistance, Neoplasm/genetics* ; Cell Line, Tumor ; Phosphorylation ; Signal Transduction ; STAT3 Transcription Factor/metabolism* ; Cell Hypoxia ; Autophagy ; Proto-Oncogene Proteins c-cbl/metabolism*

OBJECTIVE To assess the scientific rigor， clarity and feasibility of the recommendations of the Guidelines for Evidence-based Use of Biological Agents for the Clinical Treatment of Osteoporosis （hereinafter referred to as the Guideline） through external review， in order to further revise and improve the Guideline recommendations. METHODS This study employed a cross-sectional survey research design， a convenience sampling method was adopted to select frontline medical workers in the field of osteoporosis （including clinical doctors， clinical pharmacists， and nurses） as well as patients or their family members. External review was conducted through a combination of closed-ended and open-ended electronic questionnaires to get feedback from them on the appreciation，clarity and feasibility of the 32 preliminary recommendations in the Guideline. RESULTS A total of 90 external review subjects from 15 hospitals were collected， including 45 clinical doctors， 15 clinical pharmacists， 15 nurses and 15 patients or their family members. The overall appreciation degree of recommendations was 99.38%， the overall clarity degree of recommendations was 98.92%， and the overall feasibility degree of recommendations was 99.65%. At the same time， 111 subjective suggestions were collected， which provided an important reference for the further improvement of the Guideline recommendations. Based on the above feedback， the Guideline steering committee and core expert group revised the wording of 12 draft recommendations without deletion， and finally determined 32 recommendations. CONCLUSIONS The external review provides an important basis for the final formation of the Guideline， further improves the scientific rigor， clarity and feasibility of the recommendations， and ensures the standardization， practicality and implementability of the Guideline.

Objective:To evaluate the clinical utility of dual-layer detector CT integrated with virtual monoenergetic imaging (VMI) and an orthopedic metal artifact reduction (O-MAR) algorithm in improving the image quality of patients after lumbar pedicle screw fixation surgery, and to analyze its impact on different types of artifacts and image quality of different tissues.Methods:The study was a prospective study, The study enrolled patients who underwent lumbar pedicle screw fixation at West China Hospital of Sichuan University between March and September 2024. All patients underwent lumbar CT scans using a dual-layer detector system, and four image sets were reconstructed. CLumbar routine scans were performed using dual-layer detector CT, and four image sets were reconstructed:onventional images (CI non-O-MAR), conventional images with O-MAR (CI O-MAR), virtual monoenergetic images (VMI non-O-MAR), and VMI with O-MAR (VMI O-MAR). Objective metrics including artifact index (AI), signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) were quantified, alongside subjective image quality assessment. One-way ANOVA or Friedman test were used to compare the objective evaluation indicators of image quality between VMI non-O-MAR and VMI O-MAR at different energy levels. Paired t-test or Wilcoxon signed-rank test was used for CI non-O-MAR/VMI non-O-MAR versus CI O-MAR/VMI O-MAR comparisons. Results:A total of 30 patients were included, and all underwent internal fixation with titanium alloy pedicle screws. Objective analysis revealed that in both high-and low-density artifact regions, the AI values of the VMI O-MAR group decreased with the increase of energy levels, and were significantly lower than those of the corresponding VMI non-O-MAR group, with a statistically significant difference (all P<0.001). When the energy level≥140 keV, the AI value of the VMI O-MAR group was simultaneously lower than that of the CI non-O-MAR group and the CI O-MAR group, with statistically significant differences (all P<0.05). The SNR and CNR on the vertebral bodies in the VMI non-O-MAR group and the VMI O-MAR group showed a decreasing trend with increasing energy levels, and were always lower than those in the CI group at high energy levels (100-180 keV) (all P<0.05). At high energy levels (100-180 keV), the SNR of VMI O-MAR in the intervertebral disc and intraspinal tissues was higher than that of the VMI non-O-MAR group, with statistically significant differences (all P<0.05). Compared to other groups, subjective analysis indicated that the 140 keV VMI combined with O-MAR group received the highest image quality scores ( P<0.05). Conclusions:The combined application of VMI and O-MAR technology effectively reduces metal artifacts in post-lumbar fixation CT images. The 140 keV VMI with O-MAR reconstruction provides superior image quality and enhances diagnostic confidence.

Objective:To analyze the efficacy and safety of different surgical approaches for the treatment of anterior skull base malignancies involving the orbit.Methods:Retrospective analysis was conducted on patients with anterior skull base malignancies involving orbit who attended Xuanwu Hospital of Capital Medical University from April 2013 to July 2021. They were divided into endoscopic endonasal approach(EEA), lateral orbital approach(ELOA), and sublabial transmaxillary approach(ESTMA) groups according to the primary surgical approach. One-way analysis of variance and χ 2 test were used to compare the clinical characteristics, degree of tumour resection, rate of postoperative cranial nerve palsy and improvement of visual acuity; Log-rank test was applied to assess the difference in overall survival (OS). Results:One hundred and ninety-eight patients were enrolled, including 107 males and 91 females, aged (48.5±15.3) years. There were 153, 33, and 12 patients in the EEA, ESTMA, and ELOA groups, respectively. There were no significant differences among the three groups in age, gender, and history of radiotherapy, chemotherapy or surgery ( P>0.05 for all). All patients in ELOA group had preoperative visual impairment (12/12), with a significantly higher percentage than EEA group (56/153) and ESTMA group (14/33) ( χ2=19.72, P<0.001). There was no significant difference between three groups in the degree of tumor resection (gross total resection: 84.97% vs. 81.82% vs. 58.33%, χ2=5.58, P>0.05), postoperative cranial nerve palsy rate (13.07% vs. 30.30% vs. 16.67%, χ2=5.95, P>0.05), visual improvement rate (58.93% vs. 57.14% vs. 58.33%, χ2=0.04, P>0.05) and 5-year OS (60.69% vs. 42.66% vs. 50.00%, χ2=3.22, P>0.05). Conclusion:All three surgical approaches were safe, effective and feasible treatment modalities.

Objective To investigate the effect of lung lobe surface projection localization combined with lung segment drainage sputum technique on airway clearance in patients with aspiration pneumonia,providing a reference for clinical nursing practice.Methods A convenience sampling method was used to select 62 patients with perioperative aspiration pneumonia secondary to brain diseases admitted to a tertiary A hospital in Beijing from May 2022 to October 2024 as the research subjects.A total of 31 patients admitted from August 2023 to October 2024 were assigned to a control group,and 31 patients admitted from May 2022 to July 2023 were assigned to an experimental group.The experimental group received lung lobe surface projection positioning combined with lung segment drainage sputum technique on top of conventional back percussion sputum clearance technique,while the control group received conventional back percussion sputum clearance technique.After the intervention,the differences in oxygenation state,inflammatory test indicators,treatment efficiency,vital signs and frequency of suction coughing between 2 groups were compared.Results After the intervention,the experimental group showed better oxygenation index,frequency of suction coughing,white blood cell count,percentage of neutrophils,procalcitonin levels,interleukin-6 levels,and treatment efficiency compared to those in the control group(P＜0.05).There was no statistically significant difference in heart rate,respiratory rate,and C-reactive protein levels between 2 groups(P＞0.05).Conclusion Lung lobe surface projection positioning combined can effectively promote the patients with aspiration pneumonia of loosening of sputum in the lungs,improve airway clearance efficiency,enhance the patient's pulmonary ventilation and gas exchange capacity,improve oxygenation levels,and reduce systemic inflammatory levels.

Nonunion of osteoporotic vertebral fractures (OVF), predominantly affecting the elderly, can lead to intractable pain, vertebral collapse, progressive kyphotic deformity, and neurological impairment, significantly compromising patients′ quality of life. There exists considerable debate on diagnosis and management of OVF, encompassing key issues such as clinical diagnosis and staging criteria for nonunion, surgical indications and procedure selection, and postoperative rehabilitation planning. Currently, there lacks standardized clinical guideline and expert consensus on the diagnosis and management of OVF nonunion in China. To address this gap, Minimally Invasive Surgery Group of Chinese Orthopedic Association, Osteoporosis Committee of Chinese Association of Orthopedic Surgeons, Prevention and Rehabilitation Committee for Osteoporosis of Chinese Association of Rehabilitation Medicine and Minimally Invasive Orthopedic Surgery Branch of China Association for Geriatric Care jointly organized domestic experts in spinal surgery, endocrinology, and rehabilitation to formulate the Clinical guideline for the diagnosis and treatment for nonunion of osteoporotic vertebral fractures ( version 2025), based on existing literature and clinical experience and adhering to principles of scientific rigor and practicality. The guideline provided 13 evidence-based recommendations encompassing diagnosis and treatment of OVF nonunion, aiming to standardize its clinical management.

Objective:To investigate the association between serum 25-hydroxyvitamin D [25(OH)D] levels and 24-h urinary calcium excretion (24-h UCaE) and hypercalciuria in Chinese adults.Methods:This cross-sectional study was conducted from March 2022 to March 2023 in nine cities in China and included 1 239 residents. Demographic characteristics were collected through questionnaires and physical examinations, fasting blood samples were assessed for bone metabolism indicators, and 24-h urine samples were used to determine the 24-h UCaE. Multiple linear regression analysis was used to explore the relationship between serum 25(OH)D and 24-h UCaE and bone metabolism indexes. The relationship between serum 25(OH)D and hypercalciuria was analyzed using a multiple logistic regression model combined with restricted cubic spline modeling.Results:The mean participant age was (47.9±18.1) years, of which 453 (36.6%) were male. The percentages of vitamin D sufficiency, insufficiency, and deficiency were 7.6% (94/1 239), 29.0% (359/1 239), and 63.4% (786/1 239), respectively. The multiple linear regression model showed that after adjusting for the covariates the 24-h UCaE gradually increased with higher levels of 25(OH)D ( P overall <0.001, P nonlinear <0.001). The logistic regression analysis revealed that compared with the vitamin D deficient group, the OR for the prevalence of hypercalciuria in the vitamin D sufficient and vitamin D insufficient groups were 3.290 (95% CI 1.745 to 6.202) and 3.742 (95% CI 2.458 to 5.697), respectively. The results of the restricted cubic spline modeling showed a positive nonlinear relationship between 25(OH)D and the prevalence of hypercalciuria ( P overall <0.001, P nonlinear <0.001). The prevalence of hypercalciuria increased when 25(OH)D was >17.00 μg/L and peaked at 26.71 μg/L, after which there was a decreasing trend in the prevalence of hypercalciuria with increasing 25(OH)D. Conclusion:Associations between serum 25(OH)D levels and urinary calcium excretion and the prevalence of hypercalciuria were observed in the Chinese adult population.

BACKGROUND:Clear aligners,due to their special material properties,are more prone to the"roller coaster effect"during the process of extracting the maxillary first premolar and closing the gap by retracting the anterior teeth,tilting and moving the teeth,leading to deepening of the anterior overjet and opening of the posterior teeth.There are fewer related studies at present concerning whether the thickness or stiffness of the aligner can be changed to reduce the"roller coaster effect"and better control the orthodontic tooth movement,.OBJECTIVE:To analyze the differences in tooth movement control ability of clear aligners of different thicknesses and stiffness when internally retracting maxillary anterior teeth by means of the three-dimensional finite element method.METHODS:Cone beam CT data of patients with convex profile were imported into Mimics and other software to simulate clinical cases.Three-dimensional finite element models were constructed to remove the first premolars,including the maxilla,teeth,and periodontal ligaments,while the diaphragms of clear aligners with thicknesses of 0.50 mm and 0.75 mm were assembled.Four sets of working conditions were created by loading the material properties of two Young's modulus of 1 000 MPa and 2 000 MPa.According to the clinical design to close of the extraction gap,and analyze the distribution of periodontal ligament stress,the displacement trend and the initial displacement of the teeth after loading and calculating in Workbench 2023 R1 software.RESULTS AND CONCLUSION:(1)The Von-Mises stress distribution pattern of periodontal ligament was consistent among the four working conditions,with the maximum value mainly distributed at the cervical part of teeth.The thicker diaphragm of the aligner,the higher the Von-Mises stress;the higher Young's modulus of the aligner,the higher the Von-Mises stress.(2)Under the four working conditions,the overall displacement trend of the maxillary dentition was that the crowns of the anterior teeth moved towards the lingual side and the roots towards the labial side,while the crowns of the posterior teeth moved towards the proximal-medial side and the roots towards the distal-medial side,and it was observed that the crown-root displacements of the teeth were in the opposite direction in all the conditions,and that the displacement of the crowns was greater than the displacement of the roots.Except for canines,the thicker the aligner diaphragm,the lower the R/C value(root-crown displacement ratio);the higher the modulus of elasticity of the aligner diaphragm,the lower the R/C value.(3)The results showed that when the maxillary anterior teeth were internally retracted using invisible aligners,the teeth showed a tendency to tilt and move without incisor torque compensation being designed;the greater the thickness of the aligner and the elastic modulus,the greater the control of the teeth,and the tendency of the teeth to tilt and move decreased;and the cuspids had to be controlled by other auxiliary means.

Objective:To evaluate the clinical utility of dual-layer detector CT integrated with virtual monoenergetic imaging (VMI) and an orthopedic metal artifact reduction (O-MAR) algorithm in improving the image quality of patients after lumbar pedicle screw fixation surgery, and to analyze its impact on different types of artifacts and image quality of different tissues.Methods:The study was a prospective study, The study enrolled patients who underwent lumbar pedicle screw fixation at West China Hospital of Sichuan University between March and September 2024. All patients underwent lumbar CT scans using a dual-layer detector system, and four image sets were reconstructed. CLumbar routine scans were performed using dual-layer detector CT, and four image sets were reconstructed:onventional images (CI non-O-MAR), conventional images with O-MAR (CI O-MAR), virtual monoenergetic images (VMI non-O-MAR), and VMI with O-MAR (VMI O-MAR). Objective metrics including artifact index (AI), signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) were quantified, alongside subjective image quality assessment. One-way ANOVA or Friedman test were used to compare the objective evaluation indicators of image quality between VMI non-O-MAR and VMI O-MAR at different energy levels. Paired t-test or Wilcoxon signed-rank test was used for CI non-O-MAR/VMI non-O-MAR versus CI O-MAR/VMI O-MAR comparisons. Results:A total of 30 patients were included, and all underwent internal fixation with titanium alloy pedicle screws. Objective analysis revealed that in both high-and low-density artifact regions, the AI values of the VMI O-MAR group decreased with the increase of energy levels, and were significantly lower than those of the corresponding VMI non-O-MAR group, with a statistically significant difference (all P<0.001). When the energy level≥140 keV, the AI value of the VMI O-MAR group was simultaneously lower than that of the CI non-O-MAR group and the CI O-MAR group, with statistically significant differences (all P<0.05). The SNR and CNR on the vertebral bodies in the VMI non-O-MAR group and the VMI O-MAR group showed a decreasing trend with increasing energy levels, and were always lower than those in the CI group at high energy levels (100-180 keV) (all P<0.05). At high energy levels (100-180 keV), the SNR of VMI O-MAR in the intervertebral disc and intraspinal tissues was higher than that of the VMI non-O-MAR group, with statistically significant differences (all P<0.05). Compared to other groups, subjective analysis indicated that the 140 keV VMI combined with O-MAR group received the highest image quality scores ( P<0.05). Conclusions:The combined application of VMI and O-MAR technology effectively reduces metal artifacts in post-lumbar fixation CT images. The 140 keV VMI with O-MAR reconstruction provides superior image quality and enhances diagnostic confidence.