Traditional manual testing of ventilator performance is labor-intensive, time-consuming, and prone to errors in data recording, making it difficult to meet the current demands for testing efficiency in the development and manufacturing of ventilators. Therefore, in this study we designed an automated testing system for essential performance parameters of ventilators. The system mainly comprises a ventilator airflow analyzer, an automated switch module for simulated lungs, and a test control platform. Under the control of testing software, this system can perform automated tests of critical performance parameters of ventilators and generate a final test report. To validate the effectiveness of the designed system, tests were conducted on two different brands of ventilators under four different operating conditions, comparing tidal volume, oxygen concentration, and positive end expiratory pressure accuracy using both the automated testing system and traditional manual methods. Bland-Altman statistical analysis indicated good consistency between the accuracy of automated tests and manual tests for all respiratory parameters. In terms of testing efficiency, the automated testing system required approximately one-third of the time needed for manual testing. These results demonstrate that the designed automated testing system provides a novel approach and means for quality inspection and measurement calibration of ventilators, showing broad application prospects.
Ventilators, Mechanical/standards* ; Equipment Design ; Humans ; Automation

OBJECTIVES: This retrospective study aimed to investigate factors influencing positional changes of the condyle and temporomandibular joint (TMJ) following mandibular defect reconstruction with bone flaps, and to evaluate the biomechanical impacts of flap reconstruction on condylar positioning, thereby providing evidence for optimizing surgical protocols and TMJ functional rehabilitation. METHODS: A retrospective study was conducted on 90 patients undergoing mandibular segmental resection with immediate bone flap reconstruction at Guizhou Medical University Affiliated Stomatological Hospital (June 2019 to May 2024). After strict screening, 50 cases with complete data were analyzed. Clinical parameters (defect size, location, reconstruction method) and craniofacial CT scans at four timepoints [preoperative (T0), 7-10 days (T1), 3 months (T2), and 6 months (T3) postoperatively] were collected. Mimics 20 software facilitated 3D reconstruction for measuring TMJ anterior/posterior/superior joint spaces (Kamelchuk method) and calculating condylar position via the Pullinger index [Ln (posterior/anterior space)]. Vitral and Krisjane methods quantified mandibular linear parameters (ramus length, condylar pole distances to the sagittal plane, angulation) and glenoid fossa morphology. Statistical analyses were performed using SPSS 21.0. RESULTS: Mandibular defect size and location were significant factors influencing postoperative condylar position changes (P<0.05). Compared to preoperative measurements, postoperative condylar anterior, posterior, and superior joint spaces were significantly increased (P<0.001). The most pronounced anterior condylar displacement occurred within 7-10 days postoperatively (P<0.05). In patients with condyle resection, postoperative joint space and angle changes were significant; in patients with condyle preservation, only superior and anterior joint space changes were statistically significant (P<0.05). Additionally, from T1 to T2, the changes in condylar medial-lateral distance, superior joint space, and anterior joint space were negatively correlated with the preoperative condylar position. Compared with preoperative,in the T0-T1 period, condylar medial-lateral distance, posterior joint space, and articular tubercle angle changes were significantly negatively correlated with time (P<0.05). Notably, the angle between the condylar long axis and the coronal axis showed a sustained negative trend from T1 to T3 (P<0.05). CONCLUSIONS Condylar position changes after mandibular defect repair with bone flap reconstruction are associated with the size and location of the defect. Additionally, adaptive remodeling of the temporomandibular joint (TMJ) joint space occurs postoperatively. The phenomenon of anterior displacement of the condyle in the early postoperative period (7-10 days) shows a trend of reduction with prolonged follow-up time, and further sample size research is needed.
Humans ; Retrospective Studies ; Temporomandibular Joint/surgery* ; Mandibular Condyle/surgery* ; Male ; Female ; Adult ; Middle Aged ; Mandibular Reconstruction/methods* ; Mandible/surgery* ; Surgical Flaps ; Tomography, X-Ray Computed ; Young Adult ; Biomechanical Phenomena ; Aged ; Adolescent ; Imaging, Three-Dimensional

Objective To explore the effects of home-based exercise rehabilitation on cardiac structure, valvular function, and exercise capacity in patients with severe aortic stenosis (AS) after transcatheter aortic valve replacement (TAVR). Methods 49 patients with severe AS who underwent TAVR at Zhongshan Hospital, Fudan University, from January 2024 to February 2025 were enrolled. They were divided into an exercise group (n＝25) or a non-exercise group (n＝24) based on participating or not in home-based rehabilitation after TAVR. The exercise group received 12 weeks of home-based exercise training (aerobic exercise plus resistance training every week); the non-exercise group received routine care. Transthoracic echocardiography (TTE) was used to assess cardiac structural parameters before discharge (T0) and after 12 weeks of exercise (T1). Functional outcomes including the 6-minute walk test (6MWT), Duke Activity Status Index (DASI), and Short Physical Performance Battery (SPPB) were compared between the two groups. A linear mixed-effects model was used to analyze the effect of home-based rehabilitation on echocardiographic parameters. Patients were stratified by baseline 6MWT (＜240 m as low-function subgroup, ≥240 m as high-function subgroup) to compare exercise-related outcomes between subgroups. Results At T1, the exercise group had a longer 6MWT distance than the non-exercise group (P＝0.012). The linear mixed-effects model showed that after 12 weeks of exercise, the left ventricular end-diastolic diameter (LVEDD) decreased in the exercise group but slightly increased in the non-exercise group, with a significant difference in changes over time between the two groups (P_interaction＝0.030). The exercise group also showed greater improvement in effective orifice area index (P_interaction＝0.028) and effective orifice area (P_interaction＝0.042) than the non-exercise group. Subgroup analysis revealed that in the low-function subgroup, the exercise group showed greater improvement in the 6MWT (P_interaction＝0.035) and the effective orifice area index (P_interaction＝0.046) compared to the non-exercise group; in the high-function subgroup, the exercise group showed greater improvement only in LVEDD compared to the non-exercise group (P_interaction＝0.046). Conclusions Home-based exercise rehabilitation improves exercise capacity, optimizes left ventricular remodeling, and enhances valvular function in patients with severe AS after TAVR, with greater benefits observed in patients with lower baseline 6MWT.

Objective:To explore the effects of parathyroid hormone(PTH)on the osteogenic differentiation of osteoblasts by reg-ulating macrophage polarization in inflammatory microenvironment.Methods:Macrophages were pretreated with lipopolysaccharide(LPS)for 2 h to establish an inflammatory microenvironment model,and then treated with PTH for 24 h.Macrophages and osteo-blasts were co-cultured in Transwell cells.Alkaline phosphatase staining,alizarin red staining,RT-qPCR and Western blot were applied to detect osteogenic differentiation.The expression of SOCS1/JAK2/STAT3 protein in macrophages was detected by West-ern blot.The change of STAT3 expression was detected after adding AG490.The expression of miR-155-5p,SOCS1,IL-1β,IL-6 and i-NOS was detected by ELISA and RT-qPCR.Results:LPS induced M1-type polarization of macrophages and inhibited the osteogenic differentiation of osteoblasts.PTH inhibited the polarization of M1-type macrophages and promoted the osteogenic differ-entiation of osteoblasts in inflammatory microenvironment(P＜0.05).PTH down-regulated the expression of miR-155-5p,IL-1β,IL-6,i-NOS,p-JAK2/JAK2 and p-STAT3/STAT3 in macrophages under inflammatory microenvironment(P＜0.05),and up-reg-ulated SOCS1(P＜0.05).AG490 further inhibited p-STAT3/STAT3 expression.Conclusion:PTH inhibits the polarization of M1-type macrophages and promotes osteogenic differentiation of osteoblasts by down-regulating miR-155-5p and then targeting SOCS1/JAK2/STAT3 signaling pathway in inflammatory microenvironment.

Objective:To explore the effects of parathyroid hormone(PTH)on the osteogenic differentiation of osteoblasts by reg-ulating macrophage polarization in inflammatory microenvironment.Methods:Macrophages were pretreated with lipopolysaccharide(LPS)for 2 h to establish an inflammatory microenvironment model,and then treated with PTH for 24 h.Macrophages and osteo-blasts were co-cultured in Transwell cells.Alkaline phosphatase staining,alizarin red staining,RT-qPCR and Western blot were applied to detect osteogenic differentiation.The expression of SOCS1/JAK2/STAT3 protein in macrophages was detected by West-ern blot.The change of STAT3 expression was detected after adding AG490.The expression of miR-155-5p,SOCS1,IL-1β,IL-6 and i-NOS was detected by ELISA and RT-qPCR.Results:LPS induced M1-type polarization of macrophages and inhibited the osteogenic differentiation of osteoblasts.PTH inhibited the polarization of M1-type macrophages and promoted the osteogenic differ-entiation of osteoblasts in inflammatory microenvironment(P＜0.05).PTH down-regulated the expression of miR-155-5p,IL-1β,IL-6,i-NOS,p-JAK2/JAK2 and p-STAT3/STAT3 in macrophages under inflammatory microenvironment(P＜0.05),and up-reg-ulated SOCS1(P＜0.05).AG490 further inhibited p-STAT3/STAT3 expression.Conclusion:PTH inhibits the polarization of M1-type macrophages and promotes osteogenic differentiation of osteoblasts by down-regulating miR-155-5p and then targeting SOCS1/JAK2/STAT3 signaling pathway in inflammatory microenvironment.

Purpose: To intelligently diagnose whether there is bladder outlet obstruction (BOO) in female with decent detrusor contraction ability by focusing on urodynamic study (UDS) data. Materials and Methods: We retrospectively reviewed the UDS data of female patients during urination. Eleven easily accessible urinary flow indicators were calculated according to the UDS data of each patient during voiding period. Eight diagnosis models based on back propagation neural network with different input feature combination were constructed by analyzing the correlations between indicators and lower urinary tract dysfunction labels. Subsequently, the stability of diagnostic models was evaluated by five-fold cross-validation based on training data, while the performance was compared on test dataset. Results: UDS data from 134 female patients with a median age of 51 years (range, 27–78 years) were selected for our study.Among them, 66 patients suffered BOO and the remaining were normal. Applying the 5-fold cross-validation method, the model with the best performance achieved an area under the receiver operating characteristic curve (AUC) value of 0.949±0.060 using 9 UDS input features. The accuracy, sensitivity, and specificity for BOO diagnosis model in the testing process are 94.4%, 100%, and 89.3%, respectively. Conclusions The 9 significant indicators in UDS were employed to construct a diagnostic model of female BOO based on machine learning algorithm, which performs preferable classification accuracy and stability.

Major depressive disorder (MDD) is one of the most disabling illnesses, and approximately one-third of patients with MDD fail to show significant improvement after multiple courses of antidepressants, eventually progressing to treatment-resistant depression (TRD), a more severe and complex subtype that is difficult to treat. Obsessive-compulsive disorder (OCD) is a type of mental disorder characterized by repetitive obsessions and/or compulsive behaviors, and the high rate of comorbidity with other psychiatric disorders has been identified as a hallmark feature of OCD. In particular, OCD frequently co-occurs with MDD, and when these two conditions overlap, the resulting comorbidity is characterized by more severe symptoms and an increased risk of suicide. Magnetic seizure therapy (MST) is a novel, non-invasive neuromodulation technique that is safe and effective in the treatment of TRD with less cognitive impairment. This paper describes a case of significant symptom improvement following 100 Hz accelerated MST treatment in a patient with comorbid TRD and OCD. As a novel treatment option, MST requires further large-scale clinical trials to explore in the future.

Major depressive disorder (MDD) is one of the most disabling illnesses, and approximately one-third of patients with MDD fail to show significant improvement after multiple courses of antidepressants, eventually progressing to treatment-resistant depression (TRD), a more severe and complex subtype that is difficult to treat. Obsessive-compulsive disorder (OCD) is a type of mental disorder characterized by repetitive obsessions and/or compulsive behaviors, and the high rate of comorbidity with other psychiatric disorders has been identified as a hallmark feature of OCD. In particular, OCD frequently co-occurs with MDD, and when these two conditions overlap, the resulting comorbidity is characterized by more severe symptoms and an increased risk of suicide. Magnetic seizure therapy (MST) is a novel, non-invasive neuromodulation technique that is safe and effective in the treatment of TRD with less cognitive impairment. This paper describes a case of significant symptom improvement following 100 Hz accelerated MST treatment in a patient with comorbid TRD and OCD. As a novel treatment option, MST requires further large-scale clinical trials to explore in the future.

【Objective】 To investigate the feasibility of laparoscopic simple prostatectomy (LSP) in the treatment of large volume benign prostate hyperplasia (BPH). 【Methods】 Clinical and follow-up data of 30 patients with large volume BPH treated with LSP in our hospital during Feb.2019 and Dec.2021 were retrospectively analyzed. All patients underwent extraperitoneal LSP operation. The perioperative and 1-12 month postoperative follow-up data were analyzed. 【Results】 The average prostate volume was (92.4±38.9) mL, operation time (125±45) min, and weight of resected prostate (60.25±16.90) g. The hemoglobin decreased by (12.21±7.25) g/d after operation. No blood transfusion was needed. There was no need for bladder irrigation after operation in 21 cases (70%), and 9 cases (30%) had bladder irrigation time of (0.95±0.49) d. The postoperative catheter indwelling time was (6.92±2.51) d, and hospital stay (5.36±1.63) d. During the follow-up of (9.25±5.4) months, there was 1 case of postoperative intestinal obstruction (Clavien-Dindo grade II), 1 case of transient urinary incontinence (Clavien-Dindo grade I), and 1 case of delayed hematuria (Clavien-Dindo grade I). No urethral stricture occurred. The maximum urinary flow rate (Qmax), post-void residual urine volume (PVR), International Prostate Symptom Score (IPSS) and quality of life (QoL) 3 months after operation were significantly improved compared with those before operation (P<0.05). There was no significant difference in sexual function before and after operation (P>0.05). 【Conclusion】 LSP is safe and effective in the treatment of large volume BPH. It has advantages of complete resection of glands, minor bleeding and short postoperative bladder irrigation time. However, it still needs to be confirmed by a prospective control study of large samples.

Objective:To design a Visual TFT-based SF 6 gas measurement system. Methods:Based on Visual TFT, an SF 6 gas measurement system is designed, including system hardware design and system software design. The system hardware mainly includes gas sensors, a Visual TFT display, a signal processing circuit, and a power supply circuit. The system software mainly includes data acquisition, data display, SF 6 monitoring system, and alarm program. The Visual TFT display is controlled by Keil code to display other parameters such as gas flow rate, concentration, and waveform, and calculate the error (? E). The measurement system extracts the gas flow rate and concentration data through the waveform graph and gets the change curve of functional residual gas volume (FRC) data. Results:The proposed Visual TFT-based SF 6 gas measurement system can detect SF 6 with an arithmetic mean value of concentration ? E of 8.906%, which is less than 10% of full scale and meets the design requirements. Conclusions:The Visual TFT-based SF 6 gas measurement system can monitor the concentration of SF 6 gas in real-time, which helps to control the release of SF 6 gas and reduce the impact of inert gas emission on the human body under test. At the same time, the system has an intuitive display interface and alarm function, which helps healthcare workers diagnose and treat lung and respiratory diseases more conveniently and quickly, and improves the efficiency and safety of healthcare workers.