ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Objective: To investigate the correlation between color parameters (L^*, a^*, b^*, Eab^*) and the contents of reducing sugars, total polysaccharides, total oligosaccharides, as well as four saccharides (fructose, glucose, sucrose, and kestose) during the nine cycles of steaming and sun-drying processing of Polygonatum kingianum, and to preliminarily explore the optimal processing duration.
Methods: The color changes were objectively evaluated using a colorimeter. The anthrone-sulfuric acid method was employed to determine total polysaccharides and oligosaccharides. The 3,5-dinitrosalicylic acid (DNS) colorimetric method was used to measure total reducing sugar content. High-performance liquid chromatography coupled with charged aerosol detection (HPLC-CAD) was applied for quantitative analysis of fructose, glucose, sucrose, and kestose. Multivariate statistical analysis was conducted to assess samples from different processing stages.
Results: Significant variations in color and component contents were observed across processing stages. The herbal pieces progressively darkened with increased processing cycles: brightness (L^*) and total color difference (Eab^*) initially decreased then stabilized, while a^* (red-green) and b^* (yellow-blue) values first increased then declined. Total polysaccharides and oligosaccharides showed overall decreasing trends, whereas reducing sugars initially increased before stabilizing. Fructose and glucose levels rose continuously, while sucrose and kestose decreased progressively, becoming undetectable after five cycles.
Conclusion: The chromatic alteration and saccharide composition of P. kingianum showed significant correlation with processing duration. Both total color difference (Eab^*) and reducing sugar content stabilized after four processing cycles (12 hours), suggesting that four cycles of steaming and sun-drying may represent the optimal processing duration.

Objective: To investigate the correlation between the color parameters (L^*, a^*, b^*, Eab^* values) of Polygoni Multiflori Radix Praeparata powder prepared by different processing techniques and the contents of 2,3,5,4’-tetrahydroxystilbene-2-O-β-D-glucopyranoside, emodin, physcion, emodin-8-O-β-D-glucopyranoside, physcion-8-O-β-D-glucopyranoside.
Methods: The L^*, a^*, b^* and Eab^* values of Polygoni Multiflori Radix Praeparata powder prepared by different processing techniques were determined by spectrophotometer, and the contents of the five components were determined by high performance liquid chromatography. Secondly, SPSS 26.0 software and Simca 14.1 software were used to analyze the correlation.
Results: Through the hierarchical cluster analysis (HCA), it was found that the steamed samples and black bean steamed samples could be obviously divided into two categories: raw products and processed products. The processed products could be further divided into 2-8 h and 12-48 h. Pearson correlation analysis showed that the content of stilbene glycoside was significantly positively correlated with L^*, a^* and b^* values (P<0.01). The a^* value was significantly positively correlated with the content of emodin and physcion (P<0.01). Emodin-8-O-β-D-glucoside was positively correlated with L^* value and b^* value, while physcion-8-O-β-D-glucoside was negatively correlated with a^* value. Partial least squares discriminant analysis (PLS) showed that 2,3,5,4’-tetrahydroxystilbene-2-O-β-D-glucoside (VIP=1.69) and emodin-8-O-β-D-glucoside (VIP=1.06) were the key variables affecting chromaticity characteristics (P<0.01).
Conclusion: The three processes of steaming, black bean steaming and black bean stewing are consistent in composition transformation and chromaticity variation, and stilbene glycoside can be used as a specific index component to characterize the processed color. Chromatic parameters can effectively reflect the processing progression and serve as quality monitoring indicators during production.

Electromagnetic fields can regulate the fundamental biological processes involved in bone remodeling. As a non-invasive physical therapy, electromagnetic fields with specific parameters have demonstrated therapeutic effects on bone remodeling diseases, such as fractures and osteoporosis. Electromagnetic fields can be generated by the movement of charged particles or induced by varying currents. Based on whether the strength and direction of the electric field change over time, electromagnetic fields can be classified into static and time-varying fields. The treatment of bone remodeling diseases with static magnetic fields primarily focuses on fractures, often using magnetic splints to immobilize the fracture site while studying the effects of static magnetic fields on bone healing. However, there has been relatively little research on the prevention and treatment of osteoporosis using static magnetic fields. Pulsed electromagnetic fields, a type of time-varying field, have been widely used in clinical studies for treating fractures, osteoporosis, and non-union. However, current clinical applications are limited to low-frequency, and research on the relationship between frequency and biological effects remains insufficient. We believe that different types of electromagnetic fields acting on bone can induce various “secondary physical quantities”, such as magnetism, force, electricity, acoustics, and thermal energy, which can stimulate bone cells either individually or simultaneously. Bone cells possess specific electromagnetic properties, and in a static magnetic field, the presence of a magnetic field gradient can exert a certain magnetism on the bone tissue, leading to observable effects. In a time-varying magnetic field, the charged particles within the bone experience varying Lorentz forces, causing vibrations and generating acoustic effects. Additionally, as the frequency of the time-varying field increases, induced currents or potentials can be generated within the bone, leading to electrical effects. When the frequency and power exceed a certain threshold, electromagnetic energy can be converted into thermal energy, producing thermal effects. In summary, external electromagnetic fields with different characteristics can generate multiple physical quantities within biological tissues, such as magnetic, electric, mechanical, acoustic, and thermal effects. These physical quantities may also interact and couple with each other, stimulating the biological tissues in a combined or composite manner, thereby producing biological effects. This understanding is key to elucidating the electromagnetic mechanisms of how electromagnetic fields influence biological tissues. In the study of electromagnetic fields for bone remodeling diseases, attention should be paid to the biological effects of bone remodeling under different electromagnetic wave characteristics. This includes exploring innovative electromagnetic source technologies applicable to bone remodeling, identifying safe and effective electromagnetic field parameters, and combining basic research with technological invention to develop scientifically grounded, advanced key technologies for innovative electromagnetic treatment devices targeting bone remodeling diseases. In conclusion, electromagnetic fields and multiple physical factors have the potential to prevent and treat bone remodeling diseases, and have significant application prospects.

BACKGROUND:There is still no consensus on the optimal internal fixation for the treatment of Pauwels Ⅲ femoral neck fracture,and most of the related finite element analyses have been performed using a single simplified loading condition,and the biomechanical properties of commonly used internal fixation devices need to be further investigated. OBJECTIVE:To analyze the biomechanical characteristics of Pauwels Ⅲ femoral neck fractures treated with cannulated compression screw,dynamic hip screw,and femoral neck system by finite element method under different loading conditions of single-leg standing loads and sideways fall loads. METHODS:The DICOM data of healthy adult femur were obtained by CT scanning,imported into Mimics 15.0 software to obtain the rough model of bone tissue.The data exported from Mimics were optimized by Geomagics software,and then three internal fixation models were built and assembled with the femur model according to the parameters of the clinical application of the cannulated compression screw,dynamic hip screw,and femoral neck system by using Pro/E software.Finally,the three internal fixation models were imported into Ansys software for loading and calculation to analyze the stress distribution and displacement of the femur and the internal fixation under different working conditions of single-leg standing loads and sideways fall loads,as well as the stress characteristics of the calcar femorale and Ward's triangle. RESULTS AND CONCLUSION:(1)Under the single-leg standing load and the sideways fall load,the proximal femoral stress of the three internal fixation models was mainly distributed above the fracture end of the femoral neck.The peak stress of the proximal femoral end,fracture end,Ward triangle,and calcar femorale of the three internal fixation models were the smallest in the femoral neck system model and the largest in the cannulated compression screw model.(2)Under the single-leg standing load and the sideways fall load,the peak displacement of the proximal femur of the three internal fixation models was all located at the top of the femoral head,and the peak displacement was the smallest in the femoral neck system model and the largest in the cannulated compression screw model.(3)The peak displacement of the three internal fixation models was all located at the top of the internal fixation device under the single-leg standing and sideways fall loading conditions,and the peak displacement values were the smallest in the femoral neck system internal fixation model and the largest in the cannulated compression screw internal fixation model.(4)The internal fixation stress of the three internal fixation models was mainly distributed in the area near the fracture end of the internal fixation device under the single-leg standing and sideways fall loads,and the peak value of internal fixation stress was the smallest in the femoral neck system model and the largest in the cannulated compression screw model.(5)These results suggest that the mechanical stability of the femoral neck system is the best,but there may be a risk of stress shielding of the fracture end and calcar femorale.The stress of the internal fixation device of the femoral neck system is more dispersed,and the risk of internal fixation break is lower.

Objective To develop a single-person breast surgery teaching system to improve the teaching efficiency of breast surgery.Methods The single-person breast surgery teaching system consisted of a magnetic suspension and retraction device and a breast model.The magnetic suspension and retraction device was composed of a magnetic suspension component and a magnetic retraction component,of which,the magnetic suspension component included a bracket,an outer magnet and an inner magnet and the magnetic retraction component comprised a magnetic base and an elastic grasping forceps.The breast model was established with porcine abdominal tissue obtained from slaughterhouses.Twelve surgical trainees were randomized into an experimental group(n=6)and a control group(n=6),and the 2 groups performed flap release operations on the breast model with skin-preserving mastectomy as the target procedure.The operation was carried out with the developed system in the experimental group and with the traditional procedure in the control group.Results The two groups had the flap-free operation on the breast model finished successufully,which had no significant differences in the length of incision(P>0.05);the experimental group gained advantages over the control group in the number of assistants required,operation time,times of skin flap injuries,times of glandular injuries and effect of exposure,with the differences being statistically significant(all P<0.05).Conclusion The single-person breast surgery teaching system enhances the effect of exposure efficiently,meets the reequirements for single-person training and improves the teaching efficiency.[Chinese Medical Equipment Journal,2025,46(7):34-38]

Objective:To investigate the predictive value of serum neutrophil gelatinase-associated lipocalin(NGAL),calcitonin gene-related peptide(CGRP),and neutrophil-to-lymphocyte ratio(NLR)for the prognostic regression of elderly patients with stroke complicated with pulmonary infection(SCPI).Methods:This study was a retrospective single-center study,149 elderly patients with SCPI who were admitted to Inner Mongolia Baogang Hospital from June 2020 to June 2024 were selected,they were divided into poor prognosis group(n=56)and good prognosis group(n=93)according to the prognosis.Baseline data and laboratory test indicators were collected,and NLR was calculated.Serum NGAL and CGRP levels were measured by ELISA.Influencing factors of poor prognosis of elderly patients with SCPI were analyzed by Multivariate logistic regression.Predicts value was analyzed by Receiver operating characteristic(ROC)curve.Results:Compared with good prognosis group,the poor prognosis group had higher of aged ≥ 70 years,incidence of hemorrhagic stroke,serum creatinine,white blood cell count,national institute of health stroke scale(NIHSS),platelet count,C-reactive protein,NGAL,and NLR levels,longer nerosurgery intensive care unit(NICU)stay,and lower CGRP levels(P＜0.05).Higher CGRP level was an independent protective factor of poor prognosis of elderly patients with SCPI(OR＜1,P＜0.05).Age ≥ 70 years,hemorrhagic stroke,longer NICU stay,higher NIHSS score,higher NGAL level and higher NLR were independent risk factors of poor prognosis of elderly patients with SCPI(OR＞1,P＜0.05).The area under the curve(AUC)for predicting the prognostic regression of elderly patients with SCPI used NGAL,CGRP,and NLR alone or in combination was 0.777,0.771,0.786,and 0.927,respectively,with the combination of three factors showed the highest predictive power(P＜0.05).Conclusion:Age ≥70 years,hemorrhagic stroke,longer NICU stay,higher NIHSS score,higher NGAL level and higher NLR are independent risk factors of poor prognosis of elderly patients with SCPI,while higher CGRP level is an independent protective factor.The combination detection of NGAL,CGRP and NLR can improve the predictive value of prognostic regression in elderly patients with SCPI.

The inter-hospital transport of critically ill children involves the use of professional knowledge,technology,and methods to transfer these patients between hospitals without interrupting medical monitoring and treatment.Currently,inter-hospital transport system of critically ill children in China faces challenges such as uneven distribution of medical resources,inadequate training systems,and changes in the disease spectrum.There is a lack of unified documents and guidelines,leading to new trends and challenges in inter-hospital transport.In the future,with technological innovation,regional cooperation,and the establishment of standardized processes,inter-hospital transport will become increasingly professionalized,and survival rates will be significantly improved.This article reviewed the current situation,trends,and progress of inter-hospital transport of critically ill children.

Objective:To investigate the feasibility and safety of high-speed railway (HSR) transport for critically ill pediatric patients.Methods:A single-center retrospective analysis was conducted.A total of 39 children transported via HSR (HSR group) and 420 children transported via ambulance (ambulance group) from May 2019 to December 2024 at the Seventh Medical Center of the PLA General Hospital were included.Demographic data,disease types,transport distances,and outcomes were compared between the two groups,and the vital signs,blood gas analysis,mechanical ventilation parameters,and vasoactive drug usage before and after HSR transport were also compared.Results:Over the five-year period,39 HSR transports and 420 ambulance transports were completed.No significant differences were observed in gender,age,or weight between HSR group and ambulance group( P>0.05).The proportion of circulatory system diseases was significantly higher in the HSR group (74.4% vs.55.1%, P = 0.020).HSR transports covered longer distances [855(855,1 075)km vs.84(23,273) km, P<0.001] and achieved faster speeds [150(150,216) vs.80(79,80)km/h, P<0.001].No significant differences were found in heart rate,body temperature,or diastolic pressure before and after HSR transport ( P>0.05).However,systolic blood pressure and partial pressure of oxygen increased slightly post-HSR transport [(82.97±15.44) vs.(85.15 ± 14.82)mmHg, P=0.003；(84.22±25.45)mmHg vs.(88.95±28.70)mmHg, P=0.029].Mechanical ventilation parameters remained stable during HSR transport ( P>0.05). Conclusion:HSR transport is feasible and safe for critically ill children and represents a promising option for long-distance interhospital transfers of pediatric patients.

Aim To investigate the effect of p-AMPK activity on autophagy in different subtypes of MDA-MB-231(triple-negative breast cancer cells)and MCF-7(estrogen receptor-positive cells)and its regulatory mechanism.Methods MDA-MB-231 cells were trea-ted with EBSS,Baf-A1,and EBSS+Baf-A1 for four hours,and MCF-7 cells for eight hours.The effects of autophagy on cell proliferation and apoptosis were ob-served,mitochondrial morphology was examined,and the expression of autophagy markers LC3B,P62,LAMP1,TOM20,AMPK,p-AMPK,ULK1,and Bec-lin1/VPS34 proteins was detected.The autophagy pathway was validated by inhibiting AMPK activity.Results Breast cancer cells underwent autophagy af-ter starvation induction(EBSS),with inconsistent au-tophagy processes observed in different subtypes of breast cancer cells.Autophagy inhibited cell prolifera-tion.In MDA-MB-231 cells,autophagy led to an in-crease in p-AMPK levels and a decrease in ULK1 lev-els,initiating autophagy through p-AMPK activation of ULK1.In MCF-7 cells,both p-AMPK and ULK1 levels decreased after autophagy,suggesting that autophagy might not be mediated by p-AMPK activation.Conclu-sions MDA-MB-231 cells primarily initiate autophagy by directly activating ULK1 by p-AMPK,independent of the MTOR pathway.In MCF-7 cells autophagy might be triggered by inhibiting MTOR through AMPK activity or directly activating MTOR through other up-stream factors.Regulating p-AMPK activity based on the autophagy pathways in different cell subtypes could enable more precise targeting and treatment of different types of breast cancer.