Objective To understand the current status of low-density lipoprotein cholesterol (LDL-C) control in patients after coronary artery bypass grafting (CABG). Methods Clinical data of patients who underwent isolated CABG in Beijing Anzhen Hospital in 2023 were collected. All patients returned to our hospital approximately one year after surgery (10-13 months) for a lipid level recheck. We analyzed their LDL-C attainment status and influencing factors. Patients were categorized into two groups based on whether their LDL-C met the target: a LDL-C attainment group and a LDL-C non-attainment group. Results This study included 1456 patients who underwent CABG, including 320 females and 1136 males, with an average age of (61.41±9.12) years. One year post-surgery, 234 patients achieved the LDL-C target, with an attainment rate of 16.07%. The proportion of patients in the LDL-C attainment group who were ultra-high risk (77.35% vs. 92.06%, P＜0.001), female (16.24% vs. 23.08%, P=0.021), and those with comorbid hypertension (55.98% vs. 63.18%, P=0.038) was significantly lower than those in the LDL-C non-attainment group. Additionally, the baseline body mass index (BMI) [(25.37±3.24) kg/m2 vs. (26.03±3.56) kg/m2, P=0.017], total cholesterol levels [(3.30±0.84) mmol/L vs. (4.01±1.03) mmol/L, P＜0.001], LDL-C [(1.62±0.63) mmol/L vs. (2.25±0.85) mmol/L, P＜0.001], and high-density lipoprotein cholesterol [(0.98±0.26) mmol/L vs. (1.02±0.24) mmol/L, P=0.049] upon admission in the attainment group were all lower than those in the non-attainment group. Moreover, the lipid-lowering drug usage rate in the attainment group (100.00% vs. 96.24%, P=0.003) and the proportion using two types of drugs together (25.21% vs. 10.72%, P＜0.001) were both higher than those in the non-attainment group, while the statin monotherapy rate was lower than that in the non-attainment group (74.79% vs. 85.19%, P＜0.001). Logistic regression analysis showed that baseline BMI (OR=0.928, P=0.012) and baseline LDL-C levels (OR=0.207, P<0.001), patient cardiovascular risk stratification (OR=0.155, P<0.001) and lipid-lowering drug treatment regimen (OR=3.758, P<0.001) are significant factors affecting the LDL-C control status. Conclusion The LDL-C compliance rate of patients undergoing CABG is at a relatively low level 1 year after surgery. Patients with very high risk of atherosclerotic cardiovascular disease, high baseline LDL-C levels, and overweight or obesity should be strengthened lipid management. For these patients, the intensity of lipid-lowering drug use or combination medication should be increased upon discharge.

Methods: This retrospective study analyzed 32 consecutive IDS patients who underwent UEDD surgery. Clinical features, laboratory data (erythrocyte sedimentation rate and C-reactive protein), and treatment outcomes were analyzed. Results: Definite microorganisms were identified in 27 patients (84.3%), with 24 (88.9%) meeting cure criteria. The cure rate was significantly higher in the detected pathogen group compared to the undetected pathogen group (88.9% vs. 80%; χ²=19.36, p<0.0001). Metagenomic next generation sequencing (mNGS) provided faster diagnosis (41.72±6.81 hours) compared to tissue culture (95.74±35.47 hours, p<0.05). The predominant causative pathogen was Mycobacterium tuberculosis, followed by Staphylococcus aureus. Significant improvements were observed in Visual Analog Scale pain scores, from a mean of 7.9 preoperatively to 1.06 at 1 year postoperatively. The Oswestry Disability Index revealed a similar trend, showing significant improvement (p<0.05). Conclusions UEDD is a viable alternative to traditional open surgery for managing IDS in high-risk patients. UEDD offers a dual therapeutic-diagnostic advantage during the initial admission phase, enabling simultaneous debridement, neurological decompression, and targeted biopsy in a single intervention. Compared with traditional tissue culture, mNGS enables rapid microbiological diagnosis and extensive pathogen coverage.

Methods: This retrospective study analyzed 32 consecutive IDS patients who underwent UEDD surgery. Clinical features, laboratory data (erythrocyte sedimentation rate and C-reactive protein), and treatment outcomes were analyzed. Results: Definite microorganisms were identified in 27 patients (84.3%), with 24 (88.9%) meeting cure criteria. The cure rate was significantly higher in the detected pathogen group compared to the undetected pathogen group (88.9% vs. 80%; χ²=19.36, p<0.0001). Metagenomic next generation sequencing (mNGS) provided faster diagnosis (41.72±6.81 hours) compared to tissue culture (95.74±35.47 hours, p<0.05). The predominant causative pathogen was Mycobacterium tuberculosis, followed by Staphylococcus aureus. Significant improvements were observed in Visual Analog Scale pain scores, from a mean of 7.9 preoperatively to 1.06 at 1 year postoperatively. The Oswestry Disability Index revealed a similar trend, showing significant improvement (p<0.05). Conclusions UEDD is a viable alternative to traditional open surgery for managing IDS in high-risk patients. UEDD offers a dual therapeutic-diagnostic advantage during the initial admission phase, enabling simultaneous debridement, neurological decompression, and targeted biopsy in a single intervention. Compared with traditional tissue culture, mNGS enables rapid microbiological diagnosis and extensive pathogen coverage.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Methods: This retrospective study analyzed 32 consecutive IDS patients who underwent UEDD surgery. Clinical features, laboratory data (erythrocyte sedimentation rate and C-reactive protein), and treatment outcomes were analyzed. Results: Definite microorganisms were identified in 27 patients (84.3%), with 24 (88.9%) meeting cure criteria. The cure rate was significantly higher in the detected pathogen group compared to the undetected pathogen group (88.9% vs. 80%; χ²=19.36, p<0.0001). Metagenomic next generation sequencing (mNGS) provided faster diagnosis (41.72±6.81 hours) compared to tissue culture (95.74±35.47 hours, p<0.05). The predominant causative pathogen was Mycobacterium tuberculosis, followed by Staphylococcus aureus. Significant improvements were observed in Visual Analog Scale pain scores, from a mean of 7.9 preoperatively to 1.06 at 1 year postoperatively. The Oswestry Disability Index revealed a similar trend, showing significant improvement (p<0.05). Conclusions UEDD is a viable alternative to traditional open surgery for managing IDS in high-risk patients. UEDD offers a dual therapeutic-diagnostic advantage during the initial admission phase, enabling simultaneous debridement, neurological decompression, and targeted biopsy in a single intervention. Compared with traditional tissue culture, mNGS enables rapid microbiological diagnosis and extensive pathogen coverage.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

BACKGROUND:3D organoids have characteristics that resemble physiological tissues and to some extent mimic organ function,making them excellent models for applications ranging from basic development/stem cell research to personalized medicine. OBJECTIVE:To review and discuss the types of diseases and application areas such as tumor modeling that organoids can be applied to,as well as their regulatory status and challenges. METHODS:With"organoid,stem cell,disease model,3D printing technology,medical field"as Chinese and English search terms,we searched PubMed,Elsevier,WanFang,and CNKI databases to summarize and analyze organoid products at home and abroad,summarize the application of organoid technology in the medical field,and prospect the future development of organoid products in the medical field. RESULTS AND CONCLUSION:Organoids can break the limitations of traditional cell and animal models,avoid the ethical problems existing in clinical research,and have a high similarity to the source organ,a more similar performance to the physiology and pathology of human systems,and genetic stability,which has great advantages in current research.Organoids have been applied in the following fields:efficacy evaluation studies(preclinical models),including intestinal organoids,kidney organoids,liver organoids,gallbladder organoids,lung organoids,brain organoids,heart organoids,skin organoids,and reproductive system organoids;research on infectious diseases;cancer research and precision therapy;regenerative medicine;immune organoids.Although the United States,the European Union and China do not have perfect regulatory provisions,they are trying to promote the formulation of organoid regulatory laws and regulations.In China,although no organoid medical device products have been listed for the time being,its related regenerative medicine products have made breakthroughs.