Objective: To evaluate the application of blood conservation measures in obstetric patients with different red blood cell transfusion volumes and to assess the impact of different transfusion volumes on postpartum outcomes. Methods: A retrospective investigation was conducted on 448 obstetric patients who received blood transfusions at the Shanghai General Hospital, Shanghai Jiao Tong University School of Medicine from January 2016 to December 2022. Patients were divided into four groups (1-2 units group, 3-4 units group, 5-6 units group, and >6 units group) based on the volumes of red blood cells (RBCs) transfused during and within 7 days after delivery. The maternal physiological indicators, pre- and postpartum laboratory test indicators, obstetric complications, application of blood conservation measures, use of blood products, and postpartum outcomes were reviewed. The clinical characteristics, application of blood conservation measures, and their impact on postpartum outcomes were compared among different transfusion groups. Results: There were statistically significant differences in the multivariate logistic analysis of history of previous cesarean section (OR=1.781), eclampsia/pre-eclampsia/(OR=1.972) and postpartum blood loss>1 000 mL（OR=1.699）(P<0.05) among different transfusion groups. In terms of blood conservation measures, the more RBCs transfused, the higher the rate of mothers receiving blood conservation measures such as balloon occlusion, arterial ligation, autologous blood transfusion with a cell saver, and hysterectomy. With the increase in the volume of RBCs transfusion, the demand for fresh frozen plasma（FFP）, cryoprecipitate, and platelet transfusions also increased. The hospitalization days for the four groups of parturients were 6.0 (4.0-9.0), 7.5 (5.0-14.8), 7.0 (4.5-13.0) and 11.0 (9.0-20.5), respectively (P<0.05) and the rates of ICU transfer were 2.0% (5/250), 9.4% (12/128),18.2% (6/33) and 51.4% (19/37), respectively (P<0.05). Both increased significantly with the increase in the volume of RBCs transfusion, and the differences between groups were statistically significant. Conclusion: Parturients who received higher volume of RBCs had multiple risks factors for bleeding before childbirth, had higher postpartum blood loss, and had a higher rate of application of various blood conservation measures. In addition, an increase in the volume of RBCs transfusion may have adverse effects on postpartum recovery.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Hypercoagulable state (HCS) after kidney transplantation is one of the common and serious complications in kidney transplant recipients, which has attracted increasing attention in recent years. HCS refers to the abnormal and excessive activation of blood coagulation function, leading to the increased risk of thrombosis. After kidney transplantation, the combined effects of hemodynamic changes, surgical trauma and severe rejection increase the incidence of HCS, not only raising the risk of thrombosis but also potentially causing graft failure and affecting the postoperative survival rate of patients. This article reviews the influencing factors, clinical manifestations, diagnostic methods and preventive strategies of HCS after kidney transplantation, aiming to provide a theoretical basis for optimizing perioperative management and improving the prognosis of patients.

OBJECTIVE To optimize the salt-processing technology for Anemarrhena asphodeloides. METHODS Taking soaking time， stir-frying temperature， and stir-frying time as factors， Box-Behnken response surface methodology was employed to optimize the salt-processing technology of A. asphodeloides using the contents of mangiferin， neomangiferin， isomangiferin， timosaponin BⅡ， timosaponin AⅢ， timosaponin BⅢ， total flavonoids， and total saponins as evaluation indicators. The entropy weight method was applied to determine the weight of each indicator and calculate the comprehensive score. Based on the 17 sets of Box-Behnken response surface methodology results， a genetic algorithm （GA）-back propagation （BP） neural network was used to further optimize the salt-processing technology， with soaking time， stir-frying temperature， and stir-frying time as input layers and the comprehensive score as the output layer. The salt-processing parameters obtained from the two methods were validated and compared to determine the optimal salt-processing technology for A. asphodeloides. RESULTS The optimal salt-processing conditions obtained via the Box-Behnken response surface methodology were as follows： soaking time of 23 min， stir-frying temperature of 160 ℃ ， and stir-frying time of 12 min， yielding a comprehensive score of 63.370 2. The GA-BP neural network optimization resulted in the following conditions： soaking time of 24 min， stir-frying temperature of 163 ℃， and stir-frying time of 12 min， with a comprehensive score of 65.163 8. The GA-BP neural network optimization outperformed the results obtained by Box-Behnken response surface methodology. CONCLUSIONS This study successfully optimized the salt-processing technology for A. asphodeloides. Specifically， the technology involves adding 15 mL of 0.1 g/mL saline solution to 50 g of the herbal slices， allowing them to moisten for 24 minutes， and then stir-frying at 163 ℃ for 12 minutes.

Objective:To construct an intelligent endoscopic image analysis system that could monitor the blind spot of the upper gastrointestinal tract, and to test its performance.Methods:A total of 87 167 upper gastrointestinal endoscopy images (dataset 1) including 75 551 for training and 11 616 for testing, and a total of 2 414 pharyngeal images (dataset 2) including 2 233 for training and 181 for testing were retrospectively collected from the Digestive Endoscopy Center of Renmin Hospital of Wuhan University between 2016 to 2020. A 27-category-classification model for blind spot monitoring in the upper gastrointestinal tract (model 1, which distinguished 27 anatomical sites such as the pharynx, esophagus, and stomach) and a 5-category-classification model for blind spot monitoring in the pharynx (model 2, which distinguished palate, posterior pharyngeal wall, larynx, left and right pyriform sinuses) were constructed. The above models were trained and tested based on dataset 1 and 2, respectively, and trained based on the EfficientNet-B4, ResNet50 and VGG16 models of the keras framework. Thirty complete upper gastrointestinal endoscopy videos were retrospectively collected from the Digestive Endoscopy Center of Renmin Hospital of Wuhan University in 2021 to test model 2 blind spot monitoring performance.Results:The cross-sectional comparison results of the accuracy of model 1 in identifying 27 anatomical sites of the upper gastrointestinal tract in images showed that the mean accuracy of EfficientNet-B4, ResNet50, and VGG16 were 90.90%, 90.24%, and 89.22%, respectively, with the EfficientNet-B4 model performance the best, and the accuracy of EfficientNet-B4 model for each site ranged from 80.49% to 97.80%. The cross-sectional comparison results of the accuracy of model 2 in identifying the 5 anatomical sites of the pharynx in the images showed that the mean accuracy of EfficientNet-B4, ResNet50, and VGG16 were 99.40%, 98.56%, and 97.01%, respectively, in which the EfficientNet-B4 model had the best performance, and the accuracy of EfficientNet-B4 model for each site ranged from 96.15% to 100.00%. The overall accuracy of model 2 in identifying the 5 anatomical sites of the pharynx in the video was 97.33% (146/150).Conclusion:The intelligent endoscopic image analysis system based on deep learning can monitor blind spots in the upper gastrointestinal tract, coupled with pharyngeal blind spot monitoring and esophagogastroduodenal blind spot monitoring functions. The system shows high accuracy in both images and videos, which is expected to have a potential role in clinical practice and assisting endoscopists to achieve full observation of the upper gastrointestinal tract.

Objective:Care bundles for critically ill patients with early enteral nutrition up to goal was constructed. Its purpose was to improve early enteral nutrition, prognosis and provide reference basis for improving the rate of standard of early enteral nutrition in critically ill patients.Methods:By conducting systematic searching of domestic and foreign Chinese and English databases, related guide websites, relevant documents on early enteral nutrition in critically ill patients up to goal, which were obtained, evaluated, extracted, summarized and graded. After discussion by the research group, the first draft was prepared. Delphi method was used to conduct two rounds of expert correspondence, and the final draft of the proposal was established through the reliability analysis of correspondence results.Results:Twenty experts participated finally, and their opinions tended to be consistent after two rounds of expert inquiry. The authority coefficients were 0.92 and 0.91 respectively. The variation coefficients of the importance and operability of the two rounds of correspondence items were 0.05-0.20 and 0.05-0.21, 0.00-0.17 and 0.00-0.20 respectively. The Kendall concordance coefficients for the importance and operability of the two rounds of correspondence items were 0.16 and 0.13, 0.27 and 0.18 respectively. The differences were statistically significant ( χ2 values were 117.01-228.43, all P<0.05). Finally, the final draft of bundle of care for early enteral nutrition up to goal in critically ill patients was established which included three aspects related to evaluation, implementation, and effectiveness monitoring, besides care bundle included 12 intervention perspectives and 29 specific intervention measures. Conclusions:Based on evidence-based and delphi method constructing care bundles for critically ill patients with early enteral nutrition up to goal was scientific, reliable and practical which could provide theoretical and practical guidance for bundled nursing interventions to meet early enteral nutrition standards in critically ill patients.