ObjectiveThis study aimed to establish a monocrotaline （MCT）-induced pulmonary arterial hypertension （PAH） rat model to systematically evaluate the protective effect of Xiao Qinglongtang （XQLT） on right cardiac function in model rats and further elucidate the underlying regulatory mechanism. MethodsSixty male SD rats were randomly assigned to the normal group， model group， XQLT low-， medium-， and high-dose groups （XQLT-L/M/H）， and the beraprost sodium tablet group （BST）. Except for the normal group， rats in all other groups were given a single subcutaneous injection of MCT （60 mg·kg^-1） to induce PAH. Three weeks after injection， rats in the XQLT-L/M/H groups were administered XQLT intragastrically at 3.07， 6.14， 12.28 g·kg^-1·d^-1， respectively. Rats in the BST group received beraprost sodium at 12.6 μg·kg^-1·d^-1， and rats in the model group received an equal volume of saline. All treatments lasted for 3 weeks. Right ventricular systolic pressure （RVSP） was measured by right ventricular catheterization. Cardiac function was assessed by echocardiography. The right ventricle was weighed to calculate the right ventricular hypertrophy index （RVHI）. Hematoxylin-eosin （HE） staining， Masson staining， and transmission electron microscopy were used to observe myocardial morphology. Serum metabolomic changes were analyzed using ultra-performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS）. Data-independent acquisition （DIA） proteomics was used to detect differentially expressed （DE） proteins in the right ventricle， and Western blot was used to measure the expression of uncoupling protein 3 （UCP3）， phosphatidylinositol 3-kinase catalytic subunit p110α （PIK3CA）， L1 cell adhesion molecule （L1CAM）， and quinone oxidoreductase （CRYZ）. UPLC-MS/MS was used to analyze the chemical components of XQLT. ResultsCompared with the normal group， the model group showed significantly increased RVSP and RVHI （P<0.05）， along with pathological changes in myocardial morphology. Compared with the model group， all XQLT-treated groups exhibited reductions in RVSP and RVHI as well as significant improvements in cardiac function and myocardial morphology. Among the XQLT groups， XQLT-M showed the most pronounced effects （P<0.05）， comparable to the BST group. Serum metabolomics revealed 105 differential metabolites in the XQLT groups versus the model group ［variable importance in projection （VIP） >1， P<0.05］， including 58 upregulated and 47 downregulated metabolites. KEGG enrichment analysis indicated that XQLT intervention downregulated phenylalanine metabolism （P<0.01） and upregulated unsaturated fatty acid biosynthesis （P<0.05）. Proteomics analysis showed that 982 DE proteins were identified in the MCT groups versus the normal group， including 455 upregulated and 527 downregulated proteins （|fold change （FC）| >1.3， P<0.05）. Compared with the model group， 237 DE proteins were identified in the XQLT groups， including 124 upregulated and 113 downregulated proteins （|FC| >1.3， P<0.05）， with 57 overlapping DE proteins. KEGG enrichment suggested that XQLT mainly modulated pathways related to mineral absorption， ribosomal biogenesis， peroxisomes， glycolysis/gluconeogenesis， spliceosomes， and thyroid hormone signaling. Western blot analysis showed that， compared with the model group， XQLT increased the expression of UCP3， PIK3CA， and L1CAM， while decreasing the expression of CRYZ （P<0.05）. ConclusionXQLT exerts a protective effect on right heart function in MCT-induced PAH rats， and its mechanism is associated with maintaining myocardial homeostasis and alleviating right ventricular remodeling.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

This consensus was developed by the Orthodontic Society of the Chinese Stomatological Association to provide a systematic, scientific, and practical guideline for informed consent in orthodontic care. Orthodontic treatment is typically lengthy, highly individualized, and involves multiple factors such as growth and development, occlusal function, and facial esthetics. Rapid technological advances and diverse risk profiles make the traditional reliance on orthodontist experience or institutional templates insufficient to ensure patients′ full understanding and autonomous decision-making. To address this, the expert panel conducted extensive reviews of domestic and international guidelines, analyzed representative dispute cases, and performed multicenter patient-clinician surveys. Using a multi-round Delphi method, the group established a standardized informed consent framework covering the initial consultation, treatment, and retention phases. The consensus emphasizes that informed consent is not only a fundamental legal and ethical requirement but also a key step in building trust, improving patient compliance, and enhancing treatment satisfaction. Orthodontists should clearly and comprehensively explain treatment plans, potential risks, uncertainties, and associated costs, while respecting the autonomy of patients or guardians, and maintain continuous communication and dynamic evaluation throughout the treatment process. The release of this consensus provides unified and authoritative guidance for clinical orthodontics, helping to standardize informed consent, enhance its transparency, safeguard patient rights, reduce medical risks, and promote high-quality, sustainable development of orthodontic practice.

Objective To analyze the characteristics of MR amide proton transfer(APT)imaging and enhancement signals in benign and malignant muscular soft tissue tumors and to explore the value of MR APT imaging,contrast enhancement techniques,and their combined application in the differential diagnosis of benign and malignant muscular soft tissue tumors.Methods A retrospective analysis was conducted on 34 patients with muscular soft tissue tumors confirmed by pathology,including 13 malignant and 21 benign.All patients underwent both MR with contrast enhancement and APT imaging examinations before surgery.APT values were obtained through post-processing on an image workstation.The enhancement signal characteristics and APT values were compared between benign and malignant muscular soft tissue tumors.The receiver operating characteristic(ROC)curve was used to analyze the diagnostic efficacy of the two techniques alone and in combination for differentiating between benign and malignant muscular soft tissue tumors.Results There were significant differences in enhancement signal characteristics on MR and APT values between benign and malignant muscular soft tissue tumors(P<0.05).The enhancement signal of malignant tumors was more heterogeneous,with higher enhancement degree than benign tumors;the APT value of benign tumors was(2.20±0.93)%,and the APT value of malignant tumors was(3.52±0.83)%,the ROC curve analysis determined a cutoff APT value of 2.82%for malignant tumors,with a diagnostic specificity of 90.5%and sensitivity of 76.9%.The area under the curve(AUC)for MR with contrast enhancement,APT imaging,and the combination of the two techniques were 0.694,0.857 and 0.894,respectively.No significant differences were found in the diagnostic efficacy between MR with contrast enhancement and APT imaging(Z=1.587,P=0.112 6)or between APT imaging and the combination of the two tech-niques(Z=1.217,P=0.223 4),but there was significant difference between MR with contrast enhancement and the combination of the two techniques(Z=2.428,P=0.015 2).Moreover,the combination of the two techniques showed the overall highest diag-nostic efficacy.Conclusion The combined application of MR APT imaging and contrast enhancement techniques is more beneficial for the qualitative diagnosis of muscular soft tissue tumors.

Objective:To adapt the Mindful Breastfeeding Scale (MINDF-BFS) into Chinese and assess its reliability and validity among breastfeeding mothers in China.Methods:Following the Beaton cross-cultural adaptation guideline, the original scale was translated, back-translated, discussed by experts, pre-tested, culturally adapted, and revised to develop the Chinese version of the MINDF-BFS. A convenience sampling method was used to select 305 postpartum women from Guangzhou Women and Children's Medical Center, Guangzhou Medical University, who visited between March and June 2024, as the study participants. The reliability and validity of the Chinese version of MINDF-BFS were evaluated.Results:The Chinese version of MINDF-BFS consisted of nine items, with the item-level content validity index ranged from 0.900 to 1.000, and the average scale-level content validity index was 0.990. Exploratory factor analysis extracted one common factor, with a variance contribution of 73.290%. Confirmatory factor analysis showed a good model fit. The Cronbach's α coefficient for the scale was 0.923, the split-half reliability coefficient was 0.915, and the test-retest reliability coefficient was 0.926.Conclusions:The Chinese version of MINDF-BFS has good psychometric properties and is suitable for assessing the mindful breastfeeding levels of Chinese postpartum women.

This consensus was developed by the Orthodontic Society of the Chinese Stomatological Association to provide a systematic, scientific, and practical guideline for informed consent in orthodontic care. Orthodontic treatment is typically lengthy, highly individualized, and involves multiple factors such as growth and development, occlusal function, and facial esthetics. Rapid technological advances and diverse risk profiles make the traditional reliance on orthodontist experience or institutional templates insufficient to ensure patients′ full understanding and autonomous decision-making. To address this, the expert panel conducted extensive reviews of domestic and international guidelines, analyzed representative dispute cases, and performed multicenter patient-clinician surveys. Using a multi-round Delphi method, the group established a standardized informed consent framework covering the initial consultation, treatment, and retention phases. The consensus emphasizes that informed consent is not only a fundamental legal and ethical requirement but also a key step in building trust, improving patient compliance, and enhancing treatment satisfaction. Orthodontists should clearly and comprehensively explain treatment plans, potential risks, uncertainties, and associated costs, while respecting the autonomy of patients or guardians, and maintain continuous communication and dynamic evaluation throughout the treatment process. The release of this consensus provides unified and authoritative guidance for clinical orthodontics, helping to standardize informed consent, enhance its transparency, safeguard patient rights, reduce medical risks, and promote high-quality, sustainable development of orthodontic practice.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.