Objective:To investigate the clinical features and prognosis of neuro-Beh?et′s syndrome (NBS) in children.Method:The clinical, brain magnetic resonance imaging and laboratory data of 5 children with NBS diagnosed in the Department of Pediatrics, General Hospital of Ningxia Medical University and Department of Rheumatology and Immunology, Children′s Hospital Affiliated to Capital Institute of Pediatrics from April 2014 to April 2024 were analyzed retrospectively. The follow-up method was retrospective outpatient or inpatient visit to evaluate the treatment effect of NBS.Result:Among the 5 NBS cases, 2 were male and 3 were female. The age of admission ranged from 8 to 17 years, the time from onset to diagnosis was 2 days to 4 years. Two patients had dizziness, headache and convulsions during the treatment of NBS, 1 patient had disturbance of consciousness, 1 patient gradually developed aphasia, limb movement disorder, dysphagia and muscle weakness after 4 years of Behcet's syndrome, and 1 patient had no clinical symptoms. C-reactive protein and erythrocyte sedimentation rate were increased in 4 cases, and cerebrospinal fluid white blood cells and immunoglobulin G were increased in 1 case. Brain magnetic resonance imaging of 4 children showed multiple lesions, including bilateral frontal lobe, occipital lobe, parietal lobe, periventricular and corpus callosum lesions. Brain magnetic resonance imaging showed multiple demyelinating diseases in 1 case, and cervical and thoracic magnetic resonance imaging showed slender cervical and thoracic spinal cord. All patients were treated with corticosteroids combined with immunosuppressants or biological agents. The children were followed up for 6 months to 4 years, and 4 cases had good treatment results, and 1 case finally gave up treatment.Conclusions:The clinical manifestations of NBS are not specific, and brain magnetic resonance imaging shows that the lesion location and morphology are not specific. NBS children treated with corticosteroids combined with immunosuppressive agents or biological agents have a good prognosis.

OBJECTIVE: To quantitatively evaluate the accuracy of data obtained from liquid-interference surfaces using an intraoral 3D scanner (IOS) integrated with a compressed airflow system, so as to provide clinical proof of accuracy for the application of the compressed airflow system-based scanning head in improving data quality on liquid-interference surfaces. METHODS: The study selected a standard model as the scanning object, adhering to the "YY/T 1818-2022 Dental Science Intraoral Digital Impression Scanner" guidelines, a standard that defined parameters for intraoral scanning. To establish a baseline for accuracy, the ATOS Q 12M scanner, known for its high precision, was used to generate true reference values. These true values served as the benchmark for evaluating the IOS performance. Building on the design of an existing scanner, a new scanning head was developed to integrate with a compressed airflow system. This new design aimed to help the IOS capture high-precision data on surfaces where liquid-interference, such as saliva, might otherwise degrade scanning accuracy. The traditional scanning method, without airflow assistance, was employed as a control group for comparison. The study included five groups in total, one control group and four experimental groups, to investigate the effects of scanning lens obstruction, airflow presence, liquid media, and the use of the new scanning head on scanning process and accuracy. Each group underwent 15 scans, generating ample data for a robust statistical comparison. By evaluating trueness and precision in each group, the study assessed the impact of the compressed airflow system on the accuracy of IOS data collected from liquid-interference surfaces. Additionally, we selected Elite and Primescan scanners as references for numerical accuracy values. RESULTS: The scanning accuracy on liquid-interference surfaces was significantly reduced in terms of both trueness and precision [Trueness: 18.5 (6.5) vs. 38.0 (6.7), P < 0.05; Precision: 19.1 (8.5) vs. 31.7 (15.0), P < 0.05]. The use of the new scanning head assisted by the compressed airflow system significantly improved the scanning accuracy [Trueness: 22.3(7.6) vs. 38.0 (6.7), P < 0.05; Precision: 25.8 (9.6) vs. 31.7 (15.0), P < 0.05]. CONCLUSION The scanning head based on the compressed airflow system can assist in improving the accuracy of data obtained from liquid-interference surfaces by the IOS.
Imaging, Three-Dimensional/methods* ; Humans ; Dental Impression Technique/instrumentation*

OBJECTIVES: To study the therapeutic mechanism of Tuihuang Mixture against cholestasis. METHODS: Forty-eight Wistar rats were randomized equally into blank group, model group, ursodeoxycholic acid group and Tuihuang Mixture group. Except for those in the blank group, all the rats were given α‑naphthylisothiocyanate (ANIT) to establish rat models of cholestasis, followed by treatments with indicated drugs or distilled water. Serum levels of ALT, AST, ALP, γ-GT, TBA and TBIL of the rats were determined, and hepatic expressions IL-1β, IL-18, FXR, NLRP3, ASC, Caspase-1 and GSDMD were detected using q-PCR, ELISA or Western blotting. Histopathological changes of the liver tissues were observed using HE staining. RESULTS: The rat models of cholestasis had significantly increased serum levels of ALT, AST, ALP, γ-GT, TBA and TBIL with increased mRNA and protein expressions of IL-1β and IL-18, decreased protein and mRNA expressions of FXR, and increased protein expressions of NLRP3 and Caspase-1 and mRNA expressions of NLRP3, ASC, Caspase-1 and GSDMD in the liver tissue, showing also irregular arrangement of liver cells, proliferation of bile duct epithelial cells and inflammatory cells infiltration. Treatment of the rat models with Tuihuang Mixture significantly decreased serum levels of ALT, AST, ALP, γ-GT, TBA and TBIL, lowered IL-1β and IL-18 and increased FXR protein and mRNA expressions, and reduced NLRP3, ASC, Caspase-1 and GSDMD proteins and NLRP3, ASC and Caspase-1 mRNA expressions in the liver tissue. Tuihuang Mixture also significantly alleviated hepatocyte injury, bile duct epithelial cell proliferation and inflammatory cell infiltration in the liver of the rat models. CONCLUSIONS Tuihuang Mixture can effectively improve cholestasis in rats possibly by inhibiting NLRP3 inflammatosome-mediated pyroptosis via regulating FXR.
Animals ; NLR Family, Pyrin Domain-Containing 3 Protein ; Rats ; Receptors, Cytoplasmic and Nuclear/metabolism* ; Cholestasis/drug therapy* ; Rats, Wistar ; Inflammasomes/metabolism* ; 1-Naphthylisothiocyanate ; Drugs, Chinese Herbal/therapeutic use* ; Male ; Interleukin-18/metabolism* ; Caspase 1/metabolism* ; Interleukin-1beta/metabolism* ; Liver/metabolism*

Objective:Based on the questionnaire, to analyze the current status of children′s bone age assessment in China, especially the application of artificial intelligence (AI)-assisted bone age assessment system in the clinic.Methods:This was a cross-sectional study. The questionnaire was adapted by ourselves through the literature method and expert interview method, and the whole volume included 22 questions, which were released in the form of WeChat applet questionnaire star to the physician groups of several associations and entrusted to the radiology and paediatricians with senior titles. The results of the different types of questions were summarised and analyzed, and the chi-square test was used to compare the count data.Results:A total of 450 valid questionnaires were collected from 162 medical institutions in 26 provinces and cities and autonomous regions, of which 232 (51.6%) were from 87 (53.7%) tertiary hospitals and 218 (48.4%) from 75 (46.3%) secondary hospitals. Of the respondents, 115 (25.6%) were senior, 137 (30.4%) middle and 198 (44.0%) junior. Child bone age measurement was performed at 75.9% (66/87) of tertiary care organizations and 26.7% (20/75) of secondary care organizations, and the difference was statistically significant ( χ2=39.10, P<0.001). Left wrist radiographs were predominantly used for bone age assessment (76.0%, 123/162), with 72.8% (118/162) of sites using the ATLAS method of assessment and 17.9% (29/162) using the scoring method. A total of 98.4% (443/450) of respondents agreed that AI technology should be used to assist in bone age assessment, but only 9.3% (15/162) of healthcare organizations used AI-assisted technology. Conclusion:At present, bone age assessment is widely used in medical institutions, but there are problems with non-standardized examination methods, inconsistent assessment standards, and imprecise assessment results. Expectations for AI technology-assisted diagnosis exist among a wide range of physicians, but there are fewer users.

Innovation is an important way to promote economic development and social progress. Recent years have seen rapid development of biological sciences. In response to social demands and the needs for developing an innovative country, fostering innovative talents in the field of biosciences has become a significant initiative supported by national policies and the needs from talent market. Taking the innovative talent training mode implemented by Zhejiang Normal University in the field of biological sciences as an example, this paper comprehensively introduces several key aspects of the mode. This includes establishing a mentorship system as the foundation, carrying out curriculum reform through project competitions and practical platforms, and promoting synergy among industry, academia, and research in talent training. This training mode has achieved positive results in practice, promoting the training of outstanding innovative talents in biological science majors, and may facilitate the reform of talent training in similar majors.
Humans ; Biological Science Disciplines ; Industry ; Policy ; Universities

In fixed prosthodontics, clear exposure of the preparation margin is the prerequisite for obtaining accurate digital impressions and improving the marginal fit of restorations. To resolve the issues associated with the cord retraction technique, such as pain, acute injury, and prolonged procedural time, this study proposes a new technology for intraoral digital impression taking with pneumatic gingival retraction. The new scanning head blows a high-speed airflow that instantaneously separates the free gingiva, locally exposing the subgingival preparation margin. Combined with the farthest point preservation stitching algorithm based on the distance from the normal vector and high-speed laser scanning photography, it achieves global preparation edge data and gingival reconstruction, realizing painless, non-invasive, and efficient precise acquisition of the preparation margin. Using this new technique, a patient with a full porcelain crown restoration on a posterior tooth was treated. The digital impression revealed a clear margin of the preparation, and the crown made from this data has a good marginal fit.

The panoramic perception of medical equipment operation and maintenance status is the basic guarantee for the implementation of smart medical care, the machine learning algorithm-based autonomous perception and active early warning model of medical equipment operation and maintenance status is proposed. Introduce deep learning multi-dimensional perception of medical equipment multi-source heterogeneous fault data training sample characteristics to realize autonomous perception of medical equipment operation and maintenance status, introduce reinforcement learning to realize autonomous decision-making of test sample fault characteristics, and build the active early warning mechanism for medical equipment faults. Taking the equipment department of hospital as the carrier of model effectiveness verification, the effectiveness simulation of the model was carried out, the results show that the model has the advantages of comprehensive fault information perception, strong compatibility of medical equipment, high efficiency of active early warning.
Algorithms ; Computer Simulation ; Machine Learning ; Self Concept ; Surgical Equipment

Computer aided design, numerically controlled milling, additive manufacturing and other digital technologies have been widely used in clinical practice of prosthodontics. The application of these technologies not only changed the design and manufacturing workflow of removable partial denture (RPD), but also improved the production efficiency of dentures, and changed the design and manufacturing concept of dentures. A large number of researches on computer aided design and computer aided manufacturing (CAD/CAM) of RPD have emerged in recent years, including researches on the properties of selective laser melting metal powder and other new dental materials, the innovative design of retainers, connectors, artificial teeth and other denture components, high precision manufacturing of the RPD framework, denture base and artificial teeth, quantitative laboratory evaluations of the accuracy, adaption and mechanical properties of RPD with new structures and made of new materials, clinical evaluations of RPD and others. This paper introduces these recent developments in CAD/CAM of RPD.

Objective:To quantitatively evaluate the accuracy of multi-color and multi-hardness dental models printed by using the photopolymer jetting (PJ) technology, and to provide protocol for the clinical application.Methods:A maxillary partially edentulous (Kennedy class Ⅱ subclass 1) standard digital model obtained through scanning and processing was selected as reference data. Five monochromatic DLP (digital light processing) models with single hardness were printed by printer DLP-800d based on DLP technology (DLP group), and five multi-color and multi-hardness PJ models were printed by printer J300Plus based on PJ technology (PJ group). Scan the printed model and register the scanning data to the reference data in Geomagic Studio 2013 software. The three-dimensional (3D) deviations of the whole and each area, including residual dentition, abutments adjacent to the edentulous area, gingiva, gingiva in the distal-extended edentulous area, gingiva in other edentulous areas, gingiva supporting the removable partial denture (RPD), were calculated and represented by the root mean square error (RMS) value. The smaller the RMS value was, the higher the trueness of printing was. The scanning data of the five models in the same group were registered in pairs to calculate the 3D deviation. The smaller the RMS value was, the higher the precision of printing was. The threshold of clinical acceptability was 200 μm. Statistical analysis was performed to compare the difference of trueness and precision between the two groups.Results:The overall trueness of the DLP group [57.70 (2.10) μm] was significantly better than that of the PJ group [71.00 (7.70) μm]. The overall precision of the DLP group [15.20 (5.05) μm] was significantly better than that of the PJ group [37.55 (15.55) μm]. The overall trueness and precision of both groups were within the clinically acceptable range.Conclusions:The domestic PJ printer used in this study can print multi-color and multi-hardness dental models with good trueness and precision, which can provide integrated 3D printing technology support for realizing the simulation of regional hardness differentiation between soft and hard tissues of dental models.

Objective:To explore the imaging manifestation and the value of imaging follow-up in Takayasu arteritis with pulmonary artery involvement in children.Methods:The data of Takayasu arteritis with pulmonary artery involvement in 7 children in Children Hospital, Capital Institute of Pediatrics from July 2014 to June 2019, were summarized retrospectively, including 1 boy and 6 girls. There were 6 children under 1 year old, the age ranged from 2 to 7 months and the median age was 3 months old. Another child was 12 years old. CT images of all cases in the initial diagnosis and during the follow-up were reconstructed. The diameters and wall thickness of arteries were observed, including ascending aorta, main pulmonary artery, left and right pulmonary artery and each lobe pulmonary artery. The diameter ratio of main pulmonary artery to ascending aorta (MPA/AAO) was calculated. The pulmonary artery pressure, the diameters of left and right coronary artery were measured using echocardiography and compared in the initial diagnosis and during the follow-up.Results:All the 7 cases showed main pulmonary artery, left and right pulmonary artery widened, 6 cases showed lobe pulmonary arteries widened, 2 cases showed main pulmonary artery, left and right pulmonary artery wall thickened, and 6 cases showed lobe pulmonary arteries wall thickened. All the 7 cases showed MPA/AAO>1 in the initial diagnosis, but only 1 case (12-year-old girl) presented pulmonary hypertension from echocardiography. All the 7 cases showed coronary artery dilated in different degrees and ranges in the initial diagnosis, including 3 cases with bilateral coronary artery dilatation and 4 unilaterally. Five children were followed up and showed improvement of pulmonary artery dilatation in 4 cases and progress in 1 case. MPA/AAO decreased in 4 cases and increased in 1 case. The pulmonary hypertension of the 12-year-old patient decreased during the follow-up, and the MPA/AAO also decreased from 1.64 to 1.01. Coronary artery dilatation decreased in 4 of 5 cases during the follow-up.Conclusion:CT imaging can clearly show pulmonary arteries, which plays an important role in the diagnosis and assessment of the treatment effect in Takayasu arteritis with pulmonary artery involvement in children.