BACKGROUND:Currently,the mandibular joint prosthesis manufactured at home and abroad needs to rely on screws to fix the condylar part of the prosthesis during the replacement process,and the retention hole is reserved to facilitate the operation during the operation.However,due to the lack of personalized jaw design,the reattachment plate may not fit the jaw,resulting in screw loosening and dislocation.Therefore,personalized condylar prosthesis replacement is of great value in the repair of the temporomandibular joint.OBJECTIVE:To design a personalized condylar prosthesis with an internal GYROID for mandibular condylar repair and reconstruction.METHODS:The GYROID structure was selected in the Rhinoceros 7 software with the single cell size of 6 mm and the wall thickness of 0.2,0.3,0.4,0.5,0.6,0.7,0.8 mm.The mechanical properties of the GYROID structure were analyzed by finite element method.3D printing of GYROID structural test specimens with different wall thickness(0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was performed to test the mechanical properties of the specimens through room temperature compression experiments.A wall thickness value conforming to the range of mandibular mechanical properties was selected through finite element analysis and room temperature compression test results.An adult male mandibular CT data were used for inverse modeling to design a condylar prosthesis with an internal GYROID.Finite element analysis was used to simulate the movement of the apical staggered position and the opposite-blade jaw position after condylar prosthesis replacement.RESULTS AND CONCLUSION:(1)The results of finite element analysis and room temperature compression experiment showed that the elastic modulus of the GYROID structure increased with the increase of wall thickness.The elastic modulus of the GYROID structure with wall thickness of 0.5-0.7 mm was within the range of the elastic modulus of the mandible(1.5-4.0 GPa).Therefore,the 6 mm monocellular GYROID structural model with a wall thickness of 0.6 mm was selected for the design of the condylar prosthesis.(2)The results of finite element analysis showed that the stress distribution of mandibular model was symmetrical.The stress distribution of the two types of occlusion was roughly the same,and the stress peak was not significantly different.The stress concentrated in the neck of the condylar prosthesis,and the stress on the replacement side was slightly larger than that on the healthy side.The maximum equivalent stress of the whole internal fixation model was 269.34 MPa,and the maximum equivalent stress of the screw was 20.14 MPa.The equivalent stress and equivalent strain values of the prosthesis were greater than that of the opposite edge jaw position when the tooth tip was interlaced.The equivalent stress and equivalent strain values of the screw were smaller than that of the opposite edge jaw position when the tooth tip was interlaced.(3)The results showed that the design and retention of the personalized GYROID condylar prosthesis were good,which was consistent with the mechanical conduction of the mandible.

BACKGROUND:Porous structures based on triple periodic minimal surfaces are one of the most promising orthopedic biostructures,among which the Gyroid structure is characterized by high specific surface area,high permeability,and zero mean curvature.OBJECTIVE:To screen the wall thickness interval of TC4 bionic bone scaffolds with 4 mm single-cell Gyroid structure matching the elastic modulus range of cancellous bone of the mandible through finite element analysis combined with mechanical compression test testing.METHODS:The finite element model of the 4 mm single-cell Gyroid structure with different wall thickths(0.1,0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was established.The equivalent elastic modulus of the Gyroid structure was analyzed,and the wall thickness interval of the Gyroid structure matching the elastic modulus range of the maxillary resinous bone was selected with different wall thicknesses of 0.2,0.3,0.4,0.5,0.6,and 0.7 mm,respectively.According to finite element analysis screening results,the material selected was Ti6Al4V.Selective laser melting was used to prepare 3D printed Gyroid structure specimens.The surface treatment was carried out by large-grained sand blasting and acid etching.The elastic modulus and compressive strength of the specimen were tested by mechanical compression experiment.RESULTS AND CONCLUSION:(1)The finite element analysis results showed that the equivalent elastic modulus of the Gyroid structure increased with the increase of wall thickness,and the equivalent elastic modulus of the Gyroid structure with wall thickness of 0.2-0.7 mm was within the range of the elastic modulus of the spongy bone of the mandible(1.5-4.0 GPa),which was used for 3D printing of the Gyroid structure specimen.(2)The mechanical compression test results showed that the elastic modulus and compressive strength of the Gyroid structural specimen increased with the increase of wall thickness,and the elastic modulus of the Gyroid structural specimen with wall thickness of 0.3-0.5 mm was within the range of the elastic modulus of the cancellous bone of the mandible.The compressive strength of the Gyroid specimen with 0.3-0.7 mm wall thickness was consistent with the mechanical properties of the mandible.(3)The results show that the Gyroid structure of 0.3-0.5 mm wall thickness is compatible with the range of elastic modulus of the mandible.

Objective:Hearing loss can seriously affect mental health status, and this study aims to investigate the influence of hearing health status on depressive symptoms among middle-aged and older individuals in the community.Methods:From June to December 2023, a stratified random sampling method was employed to select 1 238 community-dwelling middle-aged and elderly people aged 45 years and above from four cities (Hangzhou, Shanghai, Baoding, and Zhengzhou) as research subjects. A questionnaire survey was conducted to collect the subjects′ basic information, hearing health status [assessed by the Hearing Handicap Inventory for Adults-Screening Version (HHIA-S)], and depressive symptoms [assessed by the Geriatric Depression Scale-15 (GDS-15)]. T-tests, rank-sum tests and chi-square tests were used for univariate analysis, while, multiple linear regression and binary Logistic regression were applied to analyze the relationship between hearing health status and depressive symptoms.Results:A total of 1 183 community-dwelling middle-aged and elderly people aged 45 years and above were included in the final analysis (464 males and 719 females, aged from 45 to 96 years). The detection rate of hearing loss was 35.3%(418/1 183), while, the detection rate of depressive symptoms was 9.89%(117/1 183). Age, level of interaction with children, self-rated health, perceived loneliness, and hearing health significantly influenced depressive symptoms among older adults residing in the community ( P<0.05). Individuals with moderate to severe hearing loss ( β=2.04, 95% CI: 1.47, 2.62) exhibited higher GDS-15 scores compared to those without hearing impairment. Furthermore, after correcting for sex, age, marital status, monthly per capita family income, education, residence, smoking status, alcohol use, use of psychotropic medication (anxiolytic or depressant), number of illness, self-health assessment, and autonomy, middle-aged and older adults with mild to moderate hearing loss ( OR=2.89, 95% CI: 1.76, 4.88) and severe hearing loss ( OR=5.79, 95% CI: 3.05, 11.01) demonstrated an increased likelihood of experiencing depression. Conclusions:The degree of hearing loss in community-dwelling middle-aged and elderly individuals is closely associated with the risk of depressive symptoms. Therefore, it is imperative to enhance hearing health screening and to provide mental health support to individuals with hearing loss, in order to mitigate the onset and progression of depressive symptoms.

BACKGROUND:Condylar prosthesis replacement,as one of the surgical methods for the treatment of temporomandibular joint diseases,not only needs to restore the morphology and function,but also needs to ensure long-term stable application.OBJECTIVE:To design finite element analysis of a customized Gyroid condylar prosthesis.METHODS:Gyroid structure specimens with different wall thicknesses(250,350,450,550,650,and 750 μm)were designed by software.Finite element simulation compression experiments were carried out to test the elastic modulus of the specimens.The Gyroid structure wall thickness range that matches the elastic modulus of mandibular cancellous bone and whose pore size meets the osteogenesis conditions was screened out.This range was subdivided and Gyroid structure specimens were made using 3D printing technology.Mechanical compression experiments were carried out on a universal testing machine.The Gyroid structure wall thickness that meets the mechanical properties of mandibular bone,has an easier osteogenesis and a smaller strength was screened out by elastic modulus and compressive strength,and subsequent experiments were carried out.A three-dimensional model of a customized Gyroid condylar prosthesis was designed,and the finite element analysis of the blade jaw position and cusp interdigitation position of the model under natural occlusion was simulated.RESULTS AND CONCLUSION:(1)Finite element analysis results showed that with the increase of wall thickness,the elastic modulus of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 350,450,550,650,and 750 μm matched the elastic modulus of mandibular cancellous bone.Since the subsequent experiments needed to be subdivided into groups and the pore size of the 550,650,and 750 μm wall thickness group(pore size 800-1 000 μm)was within the osteogenesis range.Gyroid structure specimens with wall thickness of 550,600,650,700,and 750μm were selected for mechanical compression experiments on a universal testing machine.(2)The results of mechanical compression experiments showed that with the increase of wall thickness,the elastic modulus and compressive strength of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 550,600,and 650 μm was within the elastic modulus of the mandibular cancellous bone.Finally,the wall thickness of 650 μm and the pore size of 900 μm were selected to construct the three-dimensional model of the mandibular customized Gyroid condylar prosthesis.(3)The results of finite element analysis of three-dimensional model of the mandibular customized Gyroid condylar prosthesis showed that the stress of the articular disc in the edge-to-edge occlusion was mainly concentrated on the lower surface of the anterior middle band,and the stress of the articular disc in the interposition of tooth tips was mainly concentrated on the lateral surface of the lower surface.The maximum displacement and the maximum equivalent stress of the left and right articular discs in the edge-to-edge occlusion and the interposition of tooth tips were similar.The maximum displacement was 0.031,0.030,0.028,and 0.018 mm,and the maximum equivalent stress was 2.87,2.30,2.73,and 1.71 MPa,respectively.(4)The results showed that the Gyroid structure with a wall thickness of 650 μm was consistent with the mechanical properties of the mandible,which reduced the strength of the titanium alloy and reduced the damage of the articular disc caused by the customized Gyroid condylar prosthesis.

Metastasis is one of the main causes of death in lung cancer,and tumor microenvironment(TME)disorders promote the formation of Kenang and accelerate lung cancer metastasis.The theory of"Kenang"in TCM is of great significance in explaining the pathogenesis of lung cancer metastasis and guiding clinical treatment.Based on the theory of"Kenang",this article discussed the pathogenesis and treatment of TME disorder in lung cancer metastasis,and analyzed the mechanism of Kenang in the process of lung cancer metastasis based on the pathological mechanism of Kenang formation and its similarity with TME disorder,combined with modern medical research results.The dynamic pathogenesis evolution of"healthy qi deficiency-phlegm-stasis-cancerous toxin"runs through the course of Kenang and lung cancer,and is closely related to the hypoxia,angiogenesis,and inflammatory microenvironment contained in TME disorders.Therefore,this article proposed a hypothesis that TME disorder may be the key to promote the formation of Kenang and accelerate the metastasis of lung cancer.The metastasis of lung cancer should be prevented and treated by the ideas of strengthening the healthy qi and promoting qi circulation,dissolving phlegm and removing stasis,clearing heat and detoxifying,so as to provide a theoretical for the prevention and treatment of lung cancer metastasis by integrated traditional Chinese and Western medicine.

Systemic lupus erythematosus （SLE） may lead to secondary gynecological and obstetric disorders such as decreased ovarian reserve function， menstrual abnormalities， and adverse pregnancy outcomes. Based on "bi （痹） of both body and viscera" theory， this paper proposed that the core mechanism of SLE secondary gynecological and obstetric diseases lies in the mutual transformation between "body bi" and "viscera bi"， which together affect the uterus. Physiologically， uterus forms an internal-external network with the body and viscera through the meridians and blood vessels. Pathologically， when the healthy qi is deficient， nourishment of the body and viscera is impaired； when toxins and stasis accumulate， pathogenic factors disturb the uterus through the chong （冲） and ren （任） meri-dians. The resulting obstruction in the uterus can， in turn， manifest externally and aggravate damage to the body and viscera. Therefore， the pathogenesis of SLE secondary gynecological and obstetric diseases follows a dynamic trajectory of "body bi first， body bi affecting viscera， and then bi of both body and viscera". In treatment， the principle of harmonizing and balancing the healthy qi is emphasized. The main approach is to regulate the viscera， stabilize the body， and nourish the uterus， with the coordination of nourishing the viscera through the body， thereby achieving simultaneous treatment of both body and viscera. This highlights the guiding significance of the "bi of both body and viscera" theory in preventing and treating SLE secondary gynecological and obstetric diseases.

ObjectiveTo investigate the syndrome evolution patterns， characteristics of the used herbal medicinals， and efficacy variations across different stages of rheumatoid arthritis （RA） progression. MethodsBased on the China Rheumatoid Arthritis Registry of Patients with Chinese Medicine （CERTAIN）， 2,506 RA patients were retrospectively enrolled and categorized into ＜6 months group （166 cases）， 6 months to ＜5 years group （1063 cases）， 5 to ＜20 years group （1067 cases）， and ≥20 years group （210 cases）. Syndromes were differentiated before and after traditional Chinese medicine （TCM） treatment， including damp-heat obstruction， wind-damp obstruction， cold-damp obstruction， blood stasis obstructed in the collaterals， phlegm-stasis obstruction， liver-kidney insufficiency， qi and blood deficiency， and qi-yin deficiency. The syndrome evolution rate was calculated for high-frequency syndromes before and after treatment. Analysis was conducted on top 20 frequently used Chinese herbs at the first diagnosis. Clinical efficacy of the 28-joint disease activity score based on erythrocyte sedimentation rate （DAS28-ESR） and 28-joint disease activity score based on C-reactive protein （DAS28-CRP） before and after treatment were assessed. A multivariate logistic regression analysis was performed to identify factors affecting the efficacy of TCM treatment. ResultsPatients with course of disease shorter than 6 months predominantly presented with cold-dampness obstruction syndrome （49/166， 29.5%）， wind-dampness obstruction syndrome （46/166， 27.7%）， and dampness-heat obstruction syndrome （43/166， 25.9%）. For patients with course of disease logner than 6 months and shorter than 5 years and those within 5 to 20 years， the dominant syndrome was dampness-heat obstruction syndrome （324/1063， 30.5% and 318/1067， 29.8%， respectively）. In patients with disease duration ≥20 years， liver-kidney insufficiency syndrome and dampness-heat obstruction syndrome both predominated， each accounting for 25.24% （53/210）. The syndromes with more than 100 cases before treatment and a syndrome evolution rate greater than 10% after treatment were dampness-heat obstruction （201/738， 27.2%）， liver-kidney insufficiency （119/367， 32.4%）， and phlegm-stasis obstruction syndromes （73/172， 42.4%）. These were classified as high-frequency syndromes. After treatment， damp-heat obstruction syndrome and liver-kidney insufficiency syndrome primarily evolved into wind-damp obstruction syndrome， while phlegm-stasis obstruction syndrome evolved into damp-heat obstruction and cold-damp obstruction syndrome. The top two commonly used Chinese herbs across all groups were Gancao （Radix et Rhizoma Glycyrrhizae） and Baishao （Radix Paeoniae Alba）. In the ＜6 months group and the 6 months to ＜5 years group， high-frequency herbs also included Fangfeng （Radix Saposhnikoviae）， Duhuo （Radix Angelicae Pubescentis）， Chuanxiong （Rhizoma Chuanxiong）， and Qianghuo （Radix et Rhizoma Notopterygii）. In the 5 to ＜20 years group and the ≥20 years group， the usage of Huangqi （Radix Astragali）， Fuling （Poria）， Niuxi （Radix Achyranthis Bidentatae）， and Danggui （Radix Angelicae Sinensis） increased， while the proportion of Fangfeng and Duhuo decreased. After treatment， the DAS28-ESR and DAS28-CRP scores in all groups significantly decreased （P＜0.05）. There were statistically significant differences in clinical efficacy based on DAS28-ESR and DAS28-CRP across all groups （P＜0.01）. Multivariate logistic regression revealed significantly reduced treatment efficacy in the 6 months-5 years group （OR=0.4）， 5~20 years group （OR=0.5）， and ≥20 years group （OR=0.4） compared to the ＜6 months group. ConclusionRA syndromes follow a progression pattern from excess to deficiency， with corresponding transition in herbal usage from pathogen-eliminating to healthy qi-reinforcing approaches. TCM intervention can significantly reduce disease activity of RA， with superior efficacy in patients with disease duration shorter than 6 months.

Objective:To clarify the changes in incidence and mortality of various cancers based on analysis on registration data of malignant tumor incidence and mortality from Dehui City and Yanji City in Jilin Province.Methods:The incidence and mortality data of malignant tumors from 2009 to 2016 in Dehui City and Yanji City in Jilin Province,were collected from the Chinese Cancer Registry Annual Report published by the National Cancer Center.The number of cases,deaths,crude incidence rate,crude mortality rate,age-standardized incidence rate(ASIR),age-standardized mortality rate(ASMR),and annual percentage change(APC)of the malignant tumors were analyzed by cancer sites and genders.Results:From 2009 to 2016,the CIR of malignant tumors in Dehui City(APC=1.2%,P=0.019)and Yanji City(APC=3.6%,P=0.058)showed an increasing trend.After standard population age adjustment,the ASIR in males in Dehui City showed a significant decline(APC=-5.7%,P=0.021),while the ASIR in females exhibited an overall downward trend,but the difference was not significant(APC=-2.2%,P=0.111).In Yanji City,the ASIR in males(APC=-1.4%,P=0.535)and females(APC=0.0%,P=0.988)showed no significant changes.The CMR of malignant tumors in Dehui City(APC=1.9%,P=0.001)and Yanji City(APC=5.9%,P=0.001)showed a continuous upward trend.After age-standardization,the ASMR in males(APC=-3.1%,P=0.100)and females(APC=-4.2%,P=0.053)in Dehui City,as well as in males(APC=-1.3%,P=0.438)in Yanji City,showed a slight downward trend.Although the ASMR in females in Yanji City showed a slight increase,the difference was not statistically significant(APC=0.5%,P=0.838).In 2016,the most common malignant tumor in terms of both incidence and mortality in Dehui City was lung cancer,with a CIR of 60.76/100 000 and a CMR of 46.96/100 000.In Yanji City,the most common malignant tumor was liver cancer,with a CIR of 49.04/100 000 and a CMR of 51.09/100 000.Conclusion:Lung cancer,liver cancer,and gastric cancer are the major malignant tumors threatening residents in Dehui City,Yanji City,and even the entire Jilin Province,and should be prioritized in cancer prevention and control efforts.Early diagnosis and treatment should be strengthened.

Alzheimer's disease (AD) is characterized by cognitive and functional deterioration, with pathological features such as amyloid-beta (Aβ) aggregates in the extracellular spaces of parenchymal neurons and intracellular neurofibrillary tangles formed by the hyperphosphorylation of tau protein. Despite a thorough investigation, current treatments targeting the reduction of Aβ production, promotion of its clearance, and inhibition of tau protein phosphorylation and aggregation have not met clinical expectations, posing a substantial obstacle in the development of drugs for AD. Recently, artificial intelligence (AI), computational biology (CB), and systems biology (SB) have emerged as promising methodologies in AD research. Their capacity to analyze extensive and varied datasets facilitates the identification of intricate patterns, thereby enriching our comprehension of AD pathology. This paper provides a comprehensive examination of the utilization of AI, CB, and SB in the diagnosis of AD, including the use of imaging omics for early detection, drug discovery methods such as lecanemab, and complementary therapies like phototherapy. This review offers novel perspectives and potential avenues for further research in the realm of translational AD studies.

Deactivation of the mitochondrial pyruvate dehydrogenase complex (PDC) is important for the metabolic switching of cancer cell from oxidative phosphorylation to aerobic glycolysis. Studies examining PDC activity regulation have mainly focused on the phosphorylation of pyruvate dehydrogenase (E1), leaving other post-translational modifications largely unexplored. Here, we demonstrate that the acetylation of Lys 488 of pyruvate dehydrogenase complex component X (PDHX) commonly occurs in hepatocellular carcinoma, disrupting PDC assembly and contributing to lactate-driven epigenetic control of gene expression. PDHX, an E3-binding protein in the PDC, is acetylated by the p300 at Lys 488, impeding the interaction between PDHX and dihydrolipoyl transacetylase (E2), thereby disrupting PDC assembly to inhibit its activation. PDC disruption results in the conversion of most glucose to lactate, contributing to the aerobic glycolysis and H3K56 lactylation-mediated gene expression, facilitating tumor progression. These findings highlight a previously unrecognized role of PDHX acetylation in regulating PDC assembly and activity, linking PDHX Lys 488 acetylation and histone lactylation during hepatocellular carcinoma progression and providing a potential biomarker and therapeutic target for further development.
Humans ; Acetylation ; Carcinoma, Hepatocellular/genetics* ; Liver Neoplasms/genetics* ; Pyruvate Dehydrogenase Complex/genetics* ; Gene Expression Regulation, Neoplastic ; Animals ; Mice ; Cell Line, Tumor ; Protein Processing, Post-Translational ; Histones/metabolism* ; Disease Progression