Abstract: Objective To compare the diagnostic efficacy of the upgraded version of the GeneXpert automated fluorescent quantitative PCR system (GeneXpert MTB/RIF Ultra, GeneXpert Ultra) and the original version of the GeneXpert system (GeneXpert MTB/RIF, Xpert), real-time fluorescent quantitative nucleic acid detection (FQ-PCR), real-time fluorescent thermostatic amplification of Mycobacterium tuberculosis RNA (SAT-RNA), real-time fluorescent thermostatic amplification detection of DNA (thermostatic amplification method) and traditional BACTEC MGIT 960 liquid culture (culture method) for special specimens of tuberculosis, in order to analyze its application value in clinical detection. Methods Using prospective research methods, a total of 170 special specimens (including 47 pleural and ascites effusion samples, and 34 24-hour urinary sediment specimens, 49 tissue specimens and 40 fester specimens) were collected i'an Chest Hospital from January to September 2021. GeneXpert Ultra, Xpert, FQ-PCR, SAT-RNA, isothermal amplification, and traditional culture were used for detection. Clinical diagnosis was used as the standard, and sensitivity, specificity, positive predictive value, negative predictive value, coincidence rate, and Kappa value were compared among the methods. Results The sensitivities of GeneXpert Ultra, Xpert, FQ-PCR, SAT-RNA, isothermal amplification, and traditional culture were 65.18% (73/112), 49.11% (55/112), 37.50% (42/112), 19.64% (22/112), 8.04% (9/112), and 22.32% (25/112), respectively. The sensitivity of GeneXpert Ultra was higher than that of the other five methods, and the differences were statistically significant (χ2=66.25, 42.10, 28.89, 13.09, 4.92, 15.18, all P<0.05). GeneXpert Ultra result analysis showed that: 5.48%(4/73) cases had trace, that is, trace Mycobacterium tuberculosis load, 79.45% (58/73) cases were extremely low, 10.96% (8/73) cases were low, 2.74% (2/73) were medium, , and 1.36% (1/73) were high load. In 4 trace samples, the Xpert detection was negative for all. Of the 73 GeneXpert Ultra positive reports, 63 were rifampicin-sensitive, 6 were rifampicin-resistant, and 4 were rifampicin-resistant but of unclear resistance. Of the 55 Xpert positive reports, 45 were rifampicin-sensitive, 2 were rifampicin-resistant, and 8 were rifampicinresistant but of unclear resistance.. Conclusions The new generation of GeneXpert MTB/RIF Ultra has high sensitivity, specificity and drug resistance detection rate, and its advantage is even more apparent in the pathogenic diagnosis of special specimens of tuberculosis. It can be used as one of the preferred methods in samples with low bacterial load.

Objective:To explore whether the 15-minute retention rate (R15) of indocyanine green (ICG) in the indocyanine green excretion test and the effective hepatic blood flow (EHBF) can predict the occurrence of mild hepatic encephalopathy (MHE).Methods:Using the convenience sampling method, we collected clinic data from 153 patients diagnosed with liver cirrhosis or liver failure from June 2019 to December 2019 in the Third Affiliated Hospital of Sun Yet-sen University in Guangzhou. We screened the MHE patients with the number connect test-A and the digital symbol test, and analyzed the clinical data. By taking different values for R15 and EHBF as cut-off points, the significance of the two factors in predicting MHE is explored respectively.Results:The incidence of MHE was 38.56% (59/153). Single factor analysis showed that the difference of Child-Pugh grade between the MHE group and the non-MHE group was statistically significant ( χ2 value was 7.606, P<0.05), while the differences between cirrhosis and liver failure diagnosis, fasting blood glucose, and serum creatinine were not statistically significant ( P>0.05). When most points between 0.11 and 0.61 were selected as normal and abnormal cut-off points of R15, R15 had statistical significance ( P<0.05) and when R15 selected 0.18, it was most significant (Fisher exact test P=0.00024). When most points between 0.08 and 0.76 were selected as normal abnormal cut-off points of EHBF, EHBF had statistical significance ( P<0.05) and when EHBF selected 0.25, it was most significant (Fisher exact test P=0.00022). Through Logistic stepwise regression analysis, the risk factors for MHE were R15 and EHBF. The ROC curve was used to illustrate the predictive effects of two factors on MHE. Conclusions:The incidence of MHE in patients with cirrhosis or liver failure is high. When R15≥0.18 or EHBF≤0.25 L/min, R15 and EHBF in indocyanine green excretion test can better predict the occurrence of MHE than Child-Pugh classification, and can be help to evaluate and manage patients in time.

Objective:To investigate the feasibility, efficacy, and safety of CT- and bronchoscopy-guided 125I seed implantation in the treatment of central lung cancer complicated with atelectasis. Methods:Retrospective analysis was conducted on twenty-nine patients who were treated from May 2016 to Oct 2019 in the Second Hospital of Tianjin Medical University for central non-small-cell lung carcinoma complicated with pulmonary atelectasis that was inoperable due to medical reasons. 125I seeds were implanted into the trachea under the guidance of bronchoscopy first.The 125I seeds were then implanted into the hilum of the lungs by percutaneous puncture under the guidance of the CT and template.The seed activity was 18.5-29.6 MBq, and the prescription dose was 120 Gy.TPS planning and quality verification were performed before and after the operations.The rate of atelectasis recanalization, the satisfactory rate of dose verification, the improvement of dyspnea index, the survival time, and the adverse events during and after operation were observed. Results:All 29 patients with lung cancer complicated with atelectasis successfully completed the seed implantation, and the satisfactory rate of quality verification was 93.1%.The rate of atelectasis recanalization at 2, 6, 12, 18, and 24 months was 93.1%, 89.7%, 78.6%, 76.2%, and 60%, respectively.Their dyspnea and anoxia symptoms were significantly relieved in 5-28 months after treatment.The results showed that the patients′ dyspnea index was 2.8-0.8 before treatment and 1.4-0.9 after treatment.The median follow-up period was 20 months and median survival was 21 months.Adverse events associated with the radiation therapy included pneumothorax, hemoptysis, cough, fever, and particle displacement.No level-3 or more serious adverse events occurred.Conclusions:The CT- and bronchoscopy-guided 125I seed implantation is a safe and effective therapy option for the treatment of central non-small-cell lung carcinoma associated with atelectasis.It contributes to a high rate of local recanalization, and can rapidly improve clinical conditions and quality of life of the patients with few adverse reactions.

Objective·To compare the stress distribution at abutments, edentulous ridge, and peri-implant tissue under the vertical load between the RPI-type removable partial denture supported by implants with different diameter and the conventional RPI-type removable partial denture using a three-dimensional photoelastic method. Methods·The mandibular Kennedy I type denture defect models were fabricated according to the standard mandibular model. Four Straumann system soft tissue level implants with different diameters (two 4.1 mm implants and two 3.3 mm implants) were implanted into the bilateral first molar areas. Planting nails and epoxy resin teeth were inversely put into the mandibular silicone rubber molds to fabricate the epoxy resin photoelastic models and the regular neck (RN) healing abutments were screwed into the implants. A simulated alveolar mucosa with thickness of 2mm and a conventional RPI-type removable partial denture were placed on the epoxy resin models with or without implants. Then a force of 1 kg was vertically applied by a bite force loading device which fixed the model and denture in the centric occlusion. After the stress was frozen, model slices at different areas were cut and the stress fringes were observed. The stress was calculated according to the fringe value of per unit thickness. Results·For the conventional RPI-type removable partial denture, the maximum stress of distal abutment was mainly concentrated on the apical regions and the maximum stress of edentulous ridge was concentrated on the first molar area, particular on the lingual side of alveolar bone. For the implant-supported RPI-type removable partial denture, the maximum stress of distal abutment was lower than that of the conventional RPI-type removable partial denture, and the maximum stress of edentulous ridge (without the implants) was similar to that of abutment and supporting tissues and was lower than that of the conventional RPI-type removable partial denture. The stress around the implant was the largest and the peri-apical stress of implant was greater than the neck stress of implant. Meanwhile, the maximum stress around the implant was increased with the decrease of implant diameter. Conclusion·Compared to the conventional RPI-type removable partial denture, removable partial dentures supported by implants are more stable with a more balanced stress distribution in supporting tissues, thus benefit the health of abutments and supporting tissues.

To discover medical teaching method which is more funny and effective in early clinical contact education, Eye optical hospital affiliated to Wenzhou Medical University set up oph-thalmic microsurgery experience teaching course for junior medical students and set a variety of eye surgery simulation experience content, such as conjunctival suture surgery, corneal suture surgery, cataract surgery, eye surgery simulation and so on, which can effectively arouse students' professional interest in learning and promote students' thinking and exploration to their profession.

BACKGROUND:Atlantoaxial anatomical structures were special. Compared with thoracolumbar vertebrae, there is no fixed anatomical marker for screw implantation. Moreover, pedicle structural variation is great. The current consensus view is to suggest an individualized program of pedicle screws. The development of orthopedic digital software technology provides a novel manner for preoperative design.
OBJECTIVE:To original y design 3D matrix model, to observe atlas pedicle channel, pedicle screw safety zone, to measure optimal program for screw fixation, and to simplify preoperative design of entering pedicle screw.
METHODS:Continuous atlas CT data of 12 healthy adults in picture archiving and communication system of People’s Hospital, Three Gorges University were imported into Mimics 10.01 software. There were seven males and five females, at the age of 30-65 years old, averagely 45 years. After three-dimensional reconstruction, the three-dimensional reconstruction models were imported into 3Dmax 2009 as .dwg format. The reference three-dimensional planes and the sites of nail insertion were determined by the atlas modeling. The modeling consisted of 17×17×2 elements and the transverse section angles ranged from 0° to 40° and the sagittal section angles ranged from 0° to 40° with a space of 2.5°. 578 elements were used to simulate pedicle screw array model. Perspective observation showed that the diameter was 3.5 mm, and length was 22 mm in pedicle channel. Thus, safety area, best screw channel and screw angle were analyzed.
RESULTS AND CONCLUSION:The total number of elements in the matrix study was 17×17×2×12 in 12 subjects. 175 screws in total of 6 936 units could safely meet the operative standard. No significant difference in the number of pedicle screw between left and right sides (P>0.05). Results indicated that the digital three-dimensional modeling technology is an effective, simple, accurate way in the preoperative design and measurement for atlas pedicle surgery.

Objective To observe the PML protein expression of hepatocellar carcinoma tissue and cells lines and As 2 O3 regulate its expression .Methods Immunohistochemistry was used to examine the PML protein expression of hepatocellar carcinoma tissue . Western blot analysis were used to observe PML protein expression of hepatocellar carcinoma tissue of 12 cases ,5 hepatocellar car-cinoma cell lines ,such as HuH7 ,HepG2 ,Hep3B ,SMMC-7721 ,MHC97H .Western blot analysis was used to detected the PML pro-tein expression of these hepatocellar carcinoma cell lines after 72-96 h treated with 0 .25 μg/mL of As2 O3 .Results Immunohisch-enmical staining showed that the PML protein was expressed in both cytoplasm and nucleus ,did not well-distributed in hepatocellar carcinoma cells .There was no significant differences of PML protein expressed among differently differentiated stages of hepatocel-lar carcinoma cells .Western blot analysis found that hepatocellar carcinoma tissues of 12 cases with hepatocellar carcinoma ex-pressed PML protein ,and there was significant difference of PML protein expressed among 12 cases suffer with hepatocellar carci-noma .hepatocellar carcinoma cell lines ,such as HuH7 ,HepG2 ,Hep3B ,SMMC-7721 and MHC97H all expressed PML protein ,and there was little difference of PML protein expressed among hepatocellar carcinoma cell lines .The PML protein expression of HuH7 ,HepG2 ,Hep3B ,SMMC-7721 and MHC97H cell after 72-96 h treated with 0 .25 μg/mL of As2O3 significant decreased . Conclusion Hepatocellar carcinoma tissue and cells may express PML protein ,and As2 O3 may regulate this protein expression as well .PML protein may be the target molecule of As2 O3 treating HCC .

A novel unsaturated polyphosphoester (UPPE) was devised in our previous research, which is a kind of promising scaffold for improving bone regeneration. However, the polymerization process of UPPE scaffolds was unfavorable, which may adversely affect the bioactivity of osteoinductive molecules added if necessary, such as recombinant human bone morphogenetic protein-2 (rhBMP2). The purpose of this study was to build a kind of optimal scaffold named UPPE-PLGA-rhBMP2 (UPB) and to investigate the bioactivity of rhBMP2 in this scaffold. Furthermore, the cytotoxicity and biocompatibility of UPB scaffold was assessed in vitro. A W1/O/W2 method was used to fabricate PLGA-rhBMP2 microspheres, and then the microspheres were added to UPPE for synthesizing UPB scaffold. The morphological characters of PLGA-rhBMP2 microspheres and UPB scaffolds were observed under the scanning electron microscopy and laser scanning confocal microscopy. The cumulative release of UPB scaffolds was detected by using ELISA. The cytotoxicity and biocompatibility of UPB scaffolds were evaluated through examining the adsorption and apoptosis of bone marrow stromal cells (bMSCs) seeded on the surface of UPB scaffolds. The bioactivity of rhBMP2 in UPB scaffolds was assessed through measuring the alkaline phosphates (ALP) activity in bMSCs seeded. The results showed that UPB scaffolds sequentially exhibited burst and sustained release of rhBMP2. The cytotoxicity was greatly reduced when the scaffolds were immersed in buffer solution for 2 h. bMSCs attached and grew on the surface of soaked UPB scaffolds, exerting well biocompatibility. The ALP activity of bMSCs seeded was significantly enhanced, indicating that the bioactivity of rhBMP2 remained and still took effect after the unfavorable polymerization process of scaffolds. It was concluded that UPB scaffolds have low cytotoxicity, good biocompatibility and preserve bioactivity of rhBMP2. UPB scaffolds are promising in improving bone regeneration.
Bone Morphogenetic Protein 2 ; chemistry ; pharmacology ; Bone Regeneration ; drug effects ; Humans ; Lactic Acid ; chemistry ; pharmacology ; Phosphatidylinositol Phosphates ; chemistry ; pharmacology ; Polyglycolic Acid ; chemistry ; pharmacology ; Tissue Scaffolds

A novel unsaturated polyphosphoester (UPPE) was devised in our previous research, which is a kind of promising scaffold for improving bone regeneration. However, the polymerization process of UPPE scaffolds was unfavorable, which may adversely affect the bioactivity of osteoinductive molecules added if necessary, such as recombinant human bone morphogenetic protein-2 (rhBMP2). The purpose of this study was to build a kind of optimal scaffold named UPPE-PLGA-rhBMP2 (UPB) and to investigate the bioactivity of rhBMP2 in this scaffold. Furthermore, the cytotoxicity and biocompatibility of UPB scaffold was assessed in vitro. A W1/O/W2 method was used to fabricate PLGA-rhBMP2 microspheres, and then the microspheres were added to UPPE for synthesizing UPB scaffold. The morphological characters of PLGA-rhBMP2 microspheres and UPB scaffolds were observed under the scanning electron microscopy and laser scanning confocal microscopy. The cumulative release of UPB scaffolds was detected by using ELISA. The cytotoxicity and biocompatibility of UPB scaffolds were evaluated through examining the adsorption and apoptosis of bone marrow stromal cells (bMSCs) seeded on the surface of UPB scaffolds. The bioactivity of rhBMP2 in UPB scaffolds was assessed through measuring the alkaline phosphates (ALP) activity in bMSCs seeded. The results showed that UPB scaffolds sequentially exhibited burst and sustained release of rhBMP2. The cytotoxicity was greatly reduced when the scaffolds were immersed in buffer solution for 2 h. bMSCs attached and grew on the surface of soaked UPB scaffolds, exerting well biocompatibility. The ALP activity of bMSCs seeded was significantly enhanced, indicating that the bioactivity of rhBMP2 remained and still took effect after the unfavorable polymerization process of scaffolds. It was concluded that UPB scaffolds have low cytotoxicity, good biocompatibility and preserve bioactivity of rhBMP2. UPB scaffolds are promising in improving bone regeneration.

ObjectiveTo investigate the relationship between intervertebral disc pressure and clinical efficacy after the minimally invasive treatment of cervical disc herniation. MethodsForty-seven patients with cervical disc herniation treated by disc radiofrequency ablation, and monitored the intervertebral disc pressure after that. Moreover, the correlation between the pressure and the clinical efficacy was observed. ResultsAll cases were successfully completed under pressure monitoring. Forty-seven cases underwent a follow-up of 1-25 months,according to JOA score,using postoperative improvement rate (Hirabashi formula) to assess the clinical efficacy. High efficacy in 25 cases,fine efficacy in 19 cases,good efficacy in 3 cases,high and fine efficacy rate was 93.6％ (44/47). The postoperative intervertebral discpressure was significantly correlated with improvement rate after cervical minimally invasive surgery (P ＜0.05). ConclusionsRadiofrequency ablation treatment of cervical disc herniation is safe and effective minimally invasive technique. If the pressure in the postoperative intervertebral disc is 3 kPa,it will get better prognosis.