OBJECTIVE To prepare reactive oxygen species （ROS）-responsive methotrexate （MTX）-modified paclitaxel （PTX）/icariin （ICA） micelles （MTX-oxi-Ms@PTX/ICA）， and perform technology optimization and in vitro anti-tumor effect evaluation. METHODS Synergistic toxicity concentration range of PTX and ICA was screened by synergistic toxicity test. The micelles were prepared by thin film hydration method， and their technology was optimized by response surface methodology. The fundamental characteristics of the micelles prepared by the optimal technology were evaluated. The micelles’ cytotoxicity， targeting ability to renal carcinoma RENCA cells of mice， and their inhibitory effects on invasion and migration were assessed. RESULTS Results of synergistic toxicity experiments demonstrated that the strongest synergistic effect occurred when PTX concentrations ranged from 2.5 to 10 μmol/L and ICA concentrations ranged from 5 to 15 μmol/L. The optimal technology of MTX-oxi-Ms@PTX/ ICA was determined to include 80 mg Soluplus®， Soluplus® and TPGS1000 mass ratio of 4∶1 （mg/mg）， 2 mg DSPE-PEG2000-TK- PEG5000， 2 mg DSPE-PEG2000-MTX， 1 mg PTX， and 1.5 mg ICA， with a hydration temperature of 35 ℃ and a formulation volume of 5 mL. Under the optimal conditions， average encapsulation efficiency of PTX and ICA in 3 batches of MTX-oxi- Ms@PTX/ICA reached 92.75%， the critical micelle concentration （CMC） was 0.007 9 mg/mL， the particle size was （62.09±1.68） nm， the polydispersity index （PDI） was 0.046±0.032， and the Zeta potential was （－2.47±0.15） mV. Within 30 days of placement， there was no significant change E-mail：yingqiang_1126@163.com in particle size and polydispersity index of micelle. In vitro release experiments showed that MTX-oxi-Ms@PTX/ICA released drugs more rapidly in oxidative environments. The half maximal inhibitory concentration of MTX-oxi-Ms@PTX/ICA against RENCA cells was （5.170±0.036） μmol/L. In vitro cellular uptake experiments indicated that compared with unmodified micelles， MTX modified micelles had stronger targeting effects on cancer cells， and also significantly enhanced the inhibitory ability of invasion and migration of RENCA cells （P＜0.05）. CONCLUSIONS MTX-oxi-Ms@PTX/ICA micelles are successfully prepared， which exhibit high encapsulation efficiency， low critical micelle concentration， and good stability. These micelles demonstrate significant cytotoxicity against RENCA cells and effectively inhibit cancer cell invasion and migration.

Promoting the construction of a “Healthy China” is essential to building a great modern socialist country. Health workers in every era have their historical missions and they are the “benevolent doctors” of their own era. Therefore， clarifying the basic connotation and times requirements of “benevolent doctors” has become the first question to be answered in cultivating “benevolent doctors”. The basic connotation of “benevolent doctor” should reflect not only the comprehensive development of moral， intellectual， physical， aesthetic， and labor education in fostering virtue and nurturing talents， but also embody the people-centered development philosophy， promote social equity and justice， and reflect the strategic needs of building a “Healthy China.” Specifically in the practice of medical education， emphasizing both medical science spirit and medical humanities spirit has become an important path to cultivate “benevolent doctors” in the new era.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Based on copper death, this study investigates the effect and mechanism of Shenmai Injection on isoproterenol(ISO)-induced myocardial fibrosis(MF) in rats. SPF-grade male SD rats were randomly divided into a normal group, model group, captopril(5 mg·kg~(-1)) positive control group, and Shenmai Injection low(6 mL·kg~(-1)), medium(9 mL·kg~(-1)), and high(12 mL·kg~(-1)) dose groups. Except for the normal group, the rats in the other groups were subcutaneously injected with ISO(5 mg·kg~(-1)) once a day for 10 consecutive days to establish an MF model. Starting from the second day after successful modeling, intraperitoneal injections of the respective treatments were administered for 28 consecutive days. Hematoxylin-eosin(HE) and Masson staining were used to observe pathological changes and fibrosis levels in the myocardial tissue. Colorimetry was employed to detect serum Cu~(2+) concentration in rats. The levels of inflammatory cytokines interleukin-6(IL-6), interleukin-1β(IL-1β), interleukin-18(IL-18), tumor necrosis factor-α(TNF-α), as well as mitochondrial energy metabolites adenosine triphosphate(ATP), adenosine diphosphate(ADP), and adenosine monophosphate(AMP) in serum were measured using enzyme-linked immunosorbent assay(ELISA). Western blot was performed to detect the expression of collagen Ⅰ(Col-Ⅰ), collagen Ⅲ(Col-Ⅲ), and copper death-related proteins dihydrolipoamide acetyltransferase(DLAT), ferredoxin 1(FDX1), lipoic acid synthetase(LIAS), and heat shock protein 70(HSP70) in myocardial tissue. Immunofluorescence was used to detect the expression of DLAT, FDX1, and HSP70, while immunohistochemistry was conducted to examine the expressions of DLAT, FDX1, LIAS, and HSP70. The results showed that, compared to the model group, the myocardial structure disorder and collagen fiber deposition in the drug treatment groups were significantly improved, the cardiac index level was reduced, serum Cu~(2+), IL-6, IL-1β, IL-18, TNF-α, ADP, and AMP levels were significantly decreased, ATP levels were significantly increased, and the expressions of Col-Ⅰ, Col-Ⅲ, and HSP70 proteins in myocardial tissue were significantly reduced, while the expressions of DLAT, FDX1, and LIAS proteins were significantly elevated. In conclusion, Shenmai Injection effectively alleviates myocardial structure disorder and interstitial collagen fiber deposition in ISO-induced MF rats, promotes copper excretion, and reduces copper death in the ISO-induced rat MF model.
Animals ; Male ; Drugs, Chinese Herbal/administration & dosage* ; Rats, Sprague-Dawley ; Rats ; Myocardium/metabolism* ; Drug Combinations ; Fibrosis/metabolism* ; Copper/blood* ; Cardiomyopathies/genetics* ; Humans

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size

This study aims to investigate the effect of Chaijin Jieyu Anshen Formula on the neuroinflammation of rats with insomnia complicated with depression through the regulation of triggering receptor expressed on myeloid cells 2(TREM2)/complement protein C1q signaling pathway. Rats were randomly divided into a normal group, a model group, a positive drug group, as well as a high, medium, and low-dose groups of Chaijin Jieyu Anshen Formula, with 10 rats in each group. Except for the normal group, the other groups were injected with p-chlorophenylalanine and exposed to chronic unpredictable mild stress to establish the rat model of insomnia complicated with depression. The sucrose preference experiment, open field experiment, and water maze test were performed to evaluate the depression in rats. Enzyme-linked immunosorbent assay was employed to detect serum 5-hydroxytryptamine(5-HT), dopamine(DA), and norepinephrine(NE) levels. Hematoxylin and eosin staining and Nissl staining were used to observe the damage in nucleus accumbens neurons. Western blot and immunofluorescence were performed to detect TREM2, C1q, postsynaptic density 95(PSD-95), and synaptophysin 1(SYN1) expressions in rat nucleus accumbens, respectively. Golgi-Cox staining was utilized to observe the synaptic spine density of nucleus accumbens neurons. The results show that, compared with the model group, Chaijin Jieyu Anshen Formula can significantly increase the sucrose preference as well as the distance and number of voluntary activities, shorten the immobility time in forced swimming test and the successful incubation period of positioning navigation, and prolong the stay time of space exploration in the target quadrant test. The serum 5-HT, DA, and NE contents in the model group are significantly lower than those in the normal group, with the above contents significantly increased after the intervention of Chaijin Jieyu Anshen Formula. In addition, Chaijin Jieyu Anshen Formula can alleviate pathological damages such as swelling and loose arrangement of tissue cells in the nucleus accumbens, while increasing the Nissl body numbers. Chaijin Jieyu Anshen Formula can improve synaptic damage in the nucleus accumbens and increase the synaptic spine density. Compared to the normal group, the expression of C1q protein was significantly higher in the model group, while the expression of TREM2 protein was significantly lower. Compared to the model group, the intervention with Chaijin Jieyu Anshen Formula significantly downregulated the expression of C1q protein and significantly upregulated the expression of TREM2. Compared with the model group, the PSD-95 and SYN1 fluorescence intensity is significantly increased in the groups receiving different doses of Chaijin Jieyu Anshen Formula. In summary, Chaijin Jieyu Anshen Formula can reduce the C1q protein expression, relieve the TREM2 inhibition, and promote the synapse-related proteins PSD-95 and SNY1 expression. Chaijin Jieyu Anshen Formula improves synaptic injury of the nucleus accumbens neurons, thereby treating insomnia complicated with depression.
Animals ; Male ; Rats ; Nucleus Accumbens/metabolism* ; Drugs, Chinese Herbal/administration & dosage* ; Depression/complications* ; Membrane Glycoproteins/genetics* ; Rats, Sprague-Dawley ; Sleep Initiation and Maintenance Disorders/complications* ; Neurons/metabolism* ; Receptors, Immunologic/genetics* ; Signal Transduction/drug effects* ; Synapses/metabolism*

Objective: To explore the application and clinical efficacy of red blood cell therapeutic apheresis in erythropoietic protoporphyria (EPP) and hereditary hemochromatosis (HH). Methods: 1) The EPP patient was hospitalized twice for "abdominal pain, nausea, vomiting, and brown urine". One and two sessions of red blood cell exchange/therapeutic plasma exchange (RCE/TPE) were respectively performed during the two hospitalizations. During each session, one RCE with 6-8 units of leukoreduced RBCs and 3-4 TPE procedures with 1 800-2 000 mL of frozen plasma was conducted. Biochemical parameters were monitored before and after treatment. 2) The HH patient was hospitalized for “repeatedly elevated aminotransferases”. Erythrocytapheresis was performed once, removing 550 mL of red blood cells, and venous phlebotomy was conducted once every 2 months subsequently. Blood routine and ferritin levels were assessed before and after treatment. Results: 1) During the first hospitalization, the EPP patient was relieved of the abdominal pain and brown urine after therapeutic apheresis. The total bilirubin level decreased from 141.8 μmol/L on admission to 68.6 μmol/L at discharge, with a symptom remission duration of 10 months. During the second hospitalization, the EPP patient still had recurrent abdominal pain after therapeutic apheresis. He developed psychiatric symptoms and gastrointestinal bleeding subsequently, accompanied by elevated bilirubin levels. Liver function deteriorated and the patient went into the state of the end-stage liver disease (ESLD). 2) For the HH patient, the hemoglobin level prior to erythrocytapheresis and vein phlebotomy was 150-160 g/L, with the lowest value occurring two days after erythrocytapheresis, decreasing to 107 g/L. The ferritin level before erythrocytapheresis was 2 428.08 ng/mL and it declined gradually after theraphy, with the lowest value occurring two months after erythrocytapheresis, decreasing to 1 094 ng/mL. The ferritin level was 1 114 ng/mL two months following the first vein phlebotomy, however it increased to 1 472 ng/mL two months after the second vein phlebotomy. Conclusion: RCE/TPE may alleviate protoporphyrin liver disease and help patients with bridging liver transplantation before EPP developments to ESLD. For HH patients with significantly elevated ferritin levels, erythrocytapheresis reduces serum ferritin more quickly and maintains its level longer relative to phlebotomy.