Abstract To investigate the intervention effects of digital exercise on insufficient physical activity (PA) and sedentary behavior among college students, aiming to enhance PA levels and reduce sedentary behavior. The study systematically reviews the application characteristics of digital exercise intervention, the intervention effects of digital exercise intervention (training websites and applications, social media, wearable devices, emerging interactive technologies) on PA levels and sedentary behavior among college students.Through behavioral modification elements such as goal setting, self monitoring, and feedback support, the approach significantly enhances college students PA levels and improves sedentary behaviors, so as to provide evidence for the design and optimization of future intervention programs.

Objective To analyze the disease burden and trends of bladder cancer in China and globally from 1992 to 2021.  Methods Using the GBD 2021 database, the incidence, prevalence, mortality, and disability-adjusted life years (DALYs) rates of bladder cancer in China and globally from 1992–2021 were analyzed. Average annual percentage change (AAPC) was calculated using Joinpoint regression. Subgroup analyses by sex and age were conducted, and a Bayesian age-period-cohort (BAPC) model was used to predict trends in age-standardized incidence rate (ASIR) and age-standardized mortality rate (ASMR) for the next 15 years.  Results In 2021, China reported 106 000 new cases (ASIR: 5.14/100 000), 571 000 prevalent cases (age-standardized prevalence rate, ASPR: 26.61/100 000), 43 000 deaths (ASMR: 2.34/100 000), and a DALY rate of 45.31/100 000. From 1992–2021, China showed upward trends in ASIR and ASPR but declines in ASMR and DALYs, while global ASIR, ASMR, and DALYs decreased overall with slow ASPR growth. The peak cases in China and globally were both concentrated in the 65-79 age group, with a significantly higher burden on males than females. In China, smoking-related ASMR and ASDR exceeded global averages and rose, whereas high glucose-related indexes were lower and declined. Projections for 2021–2036 indicated that the global incidence and mortality rates would be rising, but ASIR/ASPR would be declining, while in China, the incidence rate would continue to rise, and the mortality rate will stabilize, with a significant increase in ASIR and a gradual decrease in ASPR.  Conclusion From 1992 to 2021, the incidence of bladder cancer in China has shown a continuous upward trend and is projected to persist in the future, with significant gender and age differences. Particular attention should be given to elderly males aged 85-89. The disease burden of bladder cancer attributable to smoking continues to rise, highlighting the urgent need to strengthen tobacco control policies.

Objective: To assess the clinical application value of a prediction model for red blood cell (RBC) demand in surgical procedures. Methods: Demographic data, laboratory parameters, anesthesia and transfusion records, and model prediction data were retrospectively collected from surgical patients at the First Medical Center of Chinese PLA General Hospital between 2018 and 2024. Statistical analysis was performed using the Chi-square test, t-test, and Mann-Kendall trend test. Results: From 2018 to 2024, the predictive model for RBC demand in surgical procedures was used to evaluate a total of 112 293 surgeries. During this period, the model call rate (77.49%-98.91%, P<0.05), compliance rate (56.81%-84.92%, P<0.05), and prediction accuracy rate (66.82%-94.17%, P<0.05) all showed significant upward trends. The total blood usage across the hospital (13645.4-7723.5 units, P<0.05) and the average blood usage per surgery (0.21-0.1 units, P<0.05) exhibited overall downward trends. Postoperative average hemoglobin levels in the non-compliance group (112.1-105.3 g/L in the non-compliance group vs 106.9-92.7 g/L in the compliance group, P<0.05) and the intraoperative excessive transfusion rate (5.06%-6.05% in the non-compliance group vs 0.09%-0.04% in the compliance group, P<0.05) were significantly higher in the non-compliance group compared to the compliance group. Conclusion: The predictive model for RBC demand in surgical procedures has played a positive role in conserving blood resources, optimizing blood resource allocation, and reducing intraoperative risks.

ObjectiveTo investigate somatization symptoms in adolescents during frequent earthquakes in Hefei， and to explore their correlation with earthquake experiences. MethodsA cross-sectional survey was used to select 324 adolescents in Hefei as the survey objects. The self-rating scale of somatization symptoms （SSS） and the fatigue intensity scale （FIS） were used to evaluate the somatization symptoms and fatigue degree of middle school students， and multivariate Logistic regression analysis was used to explore the related factors of somatization symptoms and fatigue among middle school students. ResultsA total of 324 adolescents were included， and the overall detection rate of somatization symptoms was 6.5%， and the detection rate of moderate or above fatigue was 20.1%. The results of regression analysis showed that adolescents who were concerned about the earthquake for a longer time （≥1 h） had a higher risk of somatization symptoms （OR=5.430， 95%CI： 1.547-19.058）， and adolescents who received pre-earthquake training had a lower degree of fatigue （OR=0.535， 95%CI： 0.292-0.981） （P<0.05）. ConclusionDuring the frequent earthquakes， adolescents have more somatization symptoms and fatigue. Therefore， it is crucial to enhance health education， reduce the emphasis on event-related reports， and implement earthquake prevention and disaster reduction training to improve the physical and mental health of adolescents.

Objective: To investigate and analyze the IgM/IgG antibody titer levels and population characteristics of local type O blood donors, and to provide data support for the establishment of a low-titer group O blood donor bank. Methods: Whole blood samples were collected from 527 type O blood donors. The agglutination of IgM and IgG anti-A/anti-B antibodies at titers 64 and 128 was assessed using an enzyme immunoassay reader. The distribution of antibody agglutination was displayed using GraphPad Prism 9.5. Statistical analysis was performed to compare antibody agglutination differences among donors of different genders, age groups, and donation frequencies. Results: At a titer of 64, the non-agglutination rate of IgM anti-A/anti-B was 71.35%, and that of IgG anti-A/anti-B was 54.46%. At a titer of 128, the non-agglutination rate of IgM anti-A/anti-B was 83.68%, and that of IgG anti-A/anti-B was 70.21%. At a titer of 64, the agglutination rate of IgM anti-B was significantly higher in female donors than in male donors (23.08% vs 13.71%, P<0.05). The agglutination rates of IgM anti-A/anti-B at a titer of 64 decreased with age in different age groups (anti-A: 26.22% vs 18.28% vs 8.49%; anti-B: 19.82% vs 11.83% vs 5.66%, P<0.05). The agglutination rates of IgM anti-A/anti-B at a titer of 64 were both higher in first-time donors than in repeat donors (anti-A: 24.00% vs 15.82%; anti-B: 18.00% vs 10.73%, P<0.05). The agglutination rate of IgG anti-A at a titer of 128 was higher in first-time donors than in repeat donors (26.57% vs 6.21%, P<0.05). Conclusion: The establishment of a low-titer type O whole blood donor bank should primarily target males, donors aged>30 years and repeat donors, with both IgM and IgG antibodies included in the antibody testing scope.

Objective:To explore the effect of benefit prediction and management method of large medical equipment of daytime surgery center under the diagnosis-intervention packet(DIP)payment mode on improving the efficiency of resource utilization and the medical quality of hospital.Methods:According to the DIP payment mode,the benefit prediction and management of large medical equipment were carried out at different stages included pre-hospital,in-hospital and post-hospital.From April 2022 to April 2024,a total of 240 patients who received treatment in the daytime surgery center of Deyang People's Hospital were selected.According to the application of benefit prediction and management of large medical equipment of daytime surgery center under the DIP payment mode,120 patients were divided into control group and observation group,with 120 cases in each group.The medical quality,the efficiency of equipment utilization and the financial benefits of the patients of two groups,who received daytime surgery,under DIP payment mode were compared.A self-made questionnaire was adopted to investigate the overall satisfaction of the patients of two groups,who received daytime surgery,for daytime surgery by using the method of telephone communication.Results:The incidence of postoperative complications,and the rate of readmitted to hospital in the observation group were respectively 5.00%and 4.17%,which were lower than those(13.33 and 11.67%)in the control group,the success rate of surgery in the observation group was 95%,which was higher than that in the control group(86.67%),and the differences were statistically significant(x2=5.004,4.630,0.641,P<0.05).The average inpatient cost,total cost of the operation of medical equipment and DIP settlement fee of the patients of undergoing daytime surgery in the observation group were all lower than those in the control group,and differences were statistically significant(t=2.168,8.512,14.474,P<0.05).The frequency of using equipment and the average scheduling efficiency of the patients of undergoing day surgery in the observation group were higher than those in the control group,while the average failure rate of equipment and the frequency of maintenance for equipment were lower than those in the control group,and the differences were statistically significant(t=23.211,21.585,5.643,23.944,P<0.05).The average satisfaction of the patients of undergoing daytime surgery in the observation group was higher than that in the control group,and the difference was statistically significant(t=8.46,P<0.05).Conclusion:The benefit prediction and management method of large medical equipment in daytime surgery center under the DIP payment mode can improve the operation efficiency and medical quality of the daytime surgery center,and reduce the operation cost of hospital,and promote the optimization allocation of medical resources of hospital.

Objective To explore the effect of curcumin(CUR)on oxidative damage of keratinocytes induced by ultraviolet B(UVB)irradiation through Toll-like receptor 4(TLR4)/nuclear factor-kappa B(NF-κB)/nucleotide-binding oligomerization domain-containing protein 3(NLRP3)signaling pathway.Methods Human keratinocytes of HaCaT were cultured normally in vitro,and the keratinocyte oxidative damage model was established by the irradiation of 57 mJ/cm2 UVB.The cells with normal culture were as the control group,the cells treated after modeling were as the UVB group,the cells treated with 5 μmol/L CUR after modeling were as the CUR group,the cells treated with 100 μg/L TLR4 inhibitor of TAK-242 after modeling were as the TAK-242 group,and the cells treated with 5 μmol/L CUR and 100 nmol/L TLR4 activator of lipopolysaccharide(LPS)were as the CUR+LPS group.qRT-PCR was applied to detect the relative expression levels of TLR4,NF-κB,and NLRP3 mRNAs of cells in each group.CCK-8 was applied to detect the cell proliferation in each group.The relative content of reactive oxygen species(ROS),the viabilities of superoxide dismutase(SOD)and catalase(CAT),and the concentrations of glutathione(MDA)and glutathione(GSH)of cells in each group were detected by fluorescence assay according to the kit instruction.ELISA kit was used to detect the expression of inflammatory factors of tumor necrosis factor-α(TNF-α)and interleukin-1β(IL-1β)of cells in each group.Flow cytometry was applied to detect the cell apoptosis in each group.Western blot was applied to detect the expression of proliferation related protein of proliferating cell nuclear antigen(PCNA),apoptosis related proteins[B-cell lymphoma-2(Bcl-2)and Bcl-2-associated X protein(Bax)],and TLR4/NF-κB/NLRP3 signaling pathway related proteins(TLR4,NF-κB and NLRP3)of cells in each group.Results Compared with the Control group,the cell survival rate,the expression levels of PCNA and Bcl-2 proteins,the viabilities of SOD and CAT,and the GSH concentration in the UVB group decreased,while the apoptosis rate,the level of Bax protein,the relative content of ROS,the concentration of MDA,the levels of TNF-α and IL-1β,and the mRNA and protein levels of TLR4,NF-κB and NLRP3 increased(P<0.05).Compared with the UVB group,the cell survival rate,the expression levels of PCNA and Bcl-2 proteins,the viabilities of SOD and CAT,and the GSH concentration in the TAK-242 group and CUR group increased,while the apoptosis rate,the level of Bax protein,the relative content of ROS,the concentration of MDA,the levels of TNF-α and IL-1β,and the mRNA and protein levels of TLR4,NF-κB and NLRP3 decreased(P<0.05).Compared with the CUR group,the cell survival rate,the expression levels of PCNA and Bcl-2 proteins,the viabilities of SOD and CAT,and the GSH concentration in the CUR+LPS group decreased,while the apoptosis rate,the level of Bax protein,the relative content of ROS,the concentration of MDA,the levels of TNF-α and IL-1β,and the mRNA and protein levels of TLR4,NF-κB and NLRP3 increased(P<0.05).Conclusion CUR can increase the antioxidant stress level of keratinocytes,alleviate inflammatory response,promote cell proliferation,and improve cell damage caused by UVB irradiation,which may be related to the inhibition of TLR4/NF-κB/NLRP3 signaling pathway.

BACKGROUND:In orthodontic treatment,full-mouth treatment is usually used to treat single-root severely twisted teeth,and single-tooth treatment is less common.OBJECTIVE:To design a personalized orthodontic device based on biomechanical principles to address the rotation of teeth 11,12,13,21,22,and 23,and evaluate the device's impact on tooth movement using three-dimensional finite element method.METHODS:Based on the biomechanical principle of tooth rotation and movement,a personalized orthodontic device was made by digital design combined with three-dimensional printing,so that the personalized orthodontic device and the tooth formed an anchorage system.The absolute anchorage of the micro-implant was used to precisely control the single-root twisted tooth in the three-dimensional direction.The CBCT data of the maxillary alveolar bone and tooth tissue of a female volunteer were collected.The three-dimensional finite element models of the twisted tooth-periodontal ligament-maxillary bone-personalized orthodontic device were established using Mimics,Geomagic Wrap,SolidWorks,3-matic Research 15.0,and Ansys Workbench software.The equivalent stress distribution characteristics of the personalized orthodontic device,the movement trend of the tooth,and the equivalent stress distribution characteristics of the periodontal ligament were calculated under a thrust of 60 g.RESULTS AND CONCLUSION:(1)The maximum equivalent stress observed on the personalized orthodontic device was 47.71 MPa.(2)The initial tooth displacement under the device demonstrated a rotational trend.The peak equivalent stress in the periodontal ligament was concentrated at the neck,while lower stress was observed in the apex region.(3)The safety and feasibility of the personalized orthodontic device designed in this study for severely rotated single-rooted teeth were preliminarily verified through finite element analysis.

Objective:To explore the effect of benefit prediction and management method of large medical equipment of daytime surgery center under the diagnosis-intervention packet(DIP)payment mode on improving the efficiency of resource utilization and the medical quality of hospital.Methods:According to the DIP payment mode,the benefit prediction and management of large medical equipment were carried out at different stages included pre-hospital,in-hospital and post-hospital.From April 2022 to April 2024,a total of 240 patients who received treatment in the daytime surgery center of Deyang People's Hospital were selected.According to the application of benefit prediction and management of large medical equipment of daytime surgery center under the DIP payment mode,120 patients were divided into control group and observation group,with 120 cases in each group.The medical quality,the efficiency of equipment utilization and the financial benefits of the patients of two groups,who received daytime surgery,under DIP payment mode were compared.A self-made questionnaire was adopted to investigate the overall satisfaction of the patients of two groups,who received daytime surgery,for daytime surgery by using the method of telephone communication.Results:The incidence of postoperative complications,and the rate of readmitted to hospital in the observation group were respectively 5.00%and 4.17%,which were lower than those(13.33 and 11.67%)in the control group,the success rate of surgery in the observation group was 95%,which was higher than that in the control group(86.67%),and the differences were statistically significant(x2=5.004,4.630,0.641,P<0.05).The average inpatient cost,total cost of the operation of medical equipment and DIP settlement fee of the patients of undergoing daytime surgery in the observation group were all lower than those in the control group,and differences were statistically significant(t=2.168,8.512,14.474,P<0.05).The frequency of using equipment and the average scheduling efficiency of the patients of undergoing day surgery in the observation group were higher than those in the control group,while the average failure rate of equipment and the frequency of maintenance for equipment were lower than those in the control group,and the differences were statistically significant(t=23.211,21.585,5.643,23.944,P<0.05).The average satisfaction of the patients of undergoing daytime surgery in the observation group was higher than that in the control group,and the difference was statistically significant(t=8.46,P<0.05).Conclusion:The benefit prediction and management method of large medical equipment in daytime surgery center under the DIP payment mode can improve the operation efficiency and medical quality of the daytime surgery center,and reduce the operation cost of hospital,and promote the optimization allocation of medical resources of hospital.

BACKGROUND:In orthodontic treatment,full-mouth treatment is usually used to treat single-root severely twisted teeth,and single-tooth treatment is less common.OBJECTIVE:To design a personalized orthodontic device based on biomechanical principles to address the rotation of teeth 11,12,13,21,22,and 23,and evaluate the device's impact on tooth movement using three-dimensional finite element method.METHODS:Based on the biomechanical principle of tooth rotation and movement,a personalized orthodontic device was made by digital design combined with three-dimensional printing,so that the personalized orthodontic device and the tooth formed an anchorage system.The absolute anchorage of the micro-implant was used to precisely control the single-root twisted tooth in the three-dimensional direction.The CBCT data of the maxillary alveolar bone and tooth tissue of a female volunteer were collected.The three-dimensional finite element models of the twisted tooth-periodontal ligament-maxillary bone-personalized orthodontic device were established using Mimics,Geomagic Wrap,SolidWorks,3-matic Research 15.0,and Ansys Workbench software.The equivalent stress distribution characteristics of the personalized orthodontic device,the movement trend of the tooth,and the equivalent stress distribution characteristics of the periodontal ligament were calculated under a thrust of 60 g.RESULTS AND CONCLUSION:(1)The maximum equivalent stress observed on the personalized orthodontic device was 47.71 MPa.(2)The initial tooth displacement under the device demonstrated a rotational trend.The peak equivalent stress in the periodontal ligament was concentrated at the neck,while lower stress was observed in the apex region.(3)The safety and feasibility of the personalized orthodontic device designed in this study for severely rotated single-rooted teeth were preliminarily verified through finite element analysis.