OBJECTIVE To evaluate the anticoagulant efficacy and safety of nafamostat mesylate （NM） in the treatment of uremic patients at high risk of bleeding undergoing continuous veno-venous hemofiltration （CVVH） with different methods （pre- dilution and post-dilution）. METHODS A total of 130 uremic patients at high risk of bleeding who underwent CVVH treatment in the nephrology department of Chongqing University Three Gorges Hospital from July 2023 to September 2024 were selected. They were divided into pre-dilution group and post-dilution group according to the random number table method， with 65 cases in each group. Both groups of patients received CVVH treatment under NM anticoagulation. The pre-dilution group adopted the pre-dilution replacement method， while the post-dilution group adopted the post-dilution replacement method. The coagulation， pressure， and usage duration of the filter and dialysis circuit venous reservoirs were compared between the two groups. The changes in prothrombin time （PT）， prothrombin time-international normalized ratio （PT-INR）， activated partial thromboplastin time （APTT）， and fibrinogen （FIB） in the peripheral venous blood before the heparin pump and after the filter at 1， 4 and 7 h of CVVH treatment， as well as 20 min after the end of treatment， were compared between the two groups. The single-compartment urea clearance rate （spKt/V）， β2-microglobulin （β2-MG） clearance rate and the incidence of adverse reactions were duni2007@foxmail.com compared between the two groups. RESULTS Both the pre-dilution and post-dilution groups had 60 patients who completed the study. The incidence of grade Ⅱ-Ⅲ coagulation of the filter and venous reservoirs， as well as the number of patients with transmembrane and venous pressure alarm intervention in the post- dilution group were significantly higher or more than those in the pre-dilution group （P＜0.05）， while usage time of the filter and the pipeline in the post-dilution group was significantly shorter than that in the pre-dilution group （P＜0.05）. The APTT values before the heparin pump as well as PT and APTT values after the filter at 1 h， 4 h， and 7 h of CVVH treatment in the post-dilution group were significantly higher than those in the pre-dilution group （P＜0.001）. There were no significant differences in PT， PT- INR， APTT and FIB between the two groups of patients 20 min after the end of treatment （P＞0.05）. The spKt/v and β2-MG clearance rates in the post-dilution group were significantly higher than those in the pre-dilution group （P＜0.001）. There was no significant difference in the incidence of adverse reactions between the two groups （P＞0.05）. CONCLUSIONS When NM is used as an anticoagulant in the CVVH treatment of uremic patients at high risk of bleeding， compared with the pre-dilution treatment method， the post-dilution treatment method has a higher incidence of filter and dialysis tubing venous reservoir， a shorter usage time of the filter and pipeline， and a greater impact on extracorporeal coagulation， but has a higher solute clearance rate. Clinically， different dilution methods can be selected according to the different treatment needs of patients.

AIM: To explore the effect of adiponectin(ADPN)on angiogenesis of human retinal microvascular endothelial cells(hRMECs)in high glucose(HG)environment and role of NOD-like receptor family pyrin domain containing 3(NLRP3)inflammasome.METHODS: The hRMECs were divided into six groups, including control group(without treatment), HG group: incubated with D-glucose, ADPN group: pretreatment with ADPN and then incubated with D-glucose, CY-09 group: pretreatment with CY-09(an NLRP3 inhibitor)and then incubated with D-glucose, Nigericin group: pretreatment with nigericin(an NLRP3 activator)and then incubated with D-glucose, Nigericin+ADPN group: pretreatment with nigericin and ADPN and then incubated with D-glucose. NLRP3 level was detected using Western blot analysis. hRMECs migration was measured using scratch wound healing assay. The tube formation of hRMECs was detected using Matrigel.RESULTS: The NLRP3 expression in hRMECs cultured in an HG environment was significantly increased(P<0.01), while ADPN and CY-09 reduced the elevated NLRP3(both P<0.05 vs HG group). Nigericin significantly increased NLRP3 levels(P<0.01 vs control group)which was reversed by ADPN(P=0.032 vs Nigericin group). hRMECs migration ability(P<0.001), and total master segments length and number of meshes increased in HG group(P<0.001)while decreased in ADPN and CY-09 groups(all P<0.01 vs HG group). The hRMECs migration ability and tube formation(total master segments length and number of meshes)in HG environment were significantly increased by nigericin(P=0.003), while ADPN inversed the change. CONCLUSION: ADPN alleviates the migration and angiogenesis of hRMECs under HG conditions.

ObjectiveTo investigate the novel post-translational modifications (PTMs) of SnRK2.6, a central component in the abscisic acid (ABA) signaling pathway, such as SUMOylation, and to establish a foundation for revealing the physiological functions and molecular mechanisms of SnRK2.6 regulated by these new modifications. MethodsThe interaction between SnRK2.6 and the SUMO E3 ligase SIZ1, as well as members of the SUMO protease family, was examined using yeast two-hybrid and in vitro pull-down assays. An in vitro SUMOylation system in Escherichia coli was utilized to determine whether SnRK2.6 undergoes SUMOylation. Mass spectrometry, combined with site-directed mutagenesis of candidate lysine residues, was employed to identify potential SUMOylation sites on SnRK2.6. In vitro de-SUMOylation assays were performed to assess whether SUMO proteases interacting with SnRK2.6 could catalyze the removal of SUMO moieties from modified SnRK2.6. The protein stability of SnRK2.6 was assessed in a cell-free degradation assay using bacterial-purified SnRK2.6 incubated with total protein extracts from Col and siz1 mutant seedlings. To dissect the genetic relationship between SnRK2.6 and SIZ1, stomatal aperture assays were performed under ABA treatment using snrk2.6, siz1, and snrk2.6 siz1 double mutant plants. ResultsSnRK2.6 physically interacts with SIZ1 and the SUMO protease ESD4, with the binding domains localized to the C-terminal region of SIZ1 and the N-terminal region of ESD4, respectively. SnRK2.6 was found to be SUMOylated, exhibiting two distinct high-molecular-mass bands ranging from 70 to 100 ku, indicative of modified forms. Bioinformatics analysis predicted four putative SUMOylation sites on lysine residues K57, K63, K142, and K190. Mass spectrometry identified three SUMOylation sites on K63, K142, and K174. However, individual or combinatorial point mutations on these sites had minimal impact on the pattern or intensity of SUMOylation signals, suggesting that these residues may not be responsible for the SUMOylation on SnRK2.6. Instead, such mutations only weaken the protein stability or accelerate the protein mobility of SnRK2.6. Therefore, the exact SUMOylation sites on SnRK2.6 remain unidentified. In de-SUMOylation experiments, incubation of GST-ESD4 with SUMOylated SnRK2.6 for 1-2 h led to the near-complete disappearance of both SUMOylated bands. In contrast, neither the GST control nor the catalytically inactive mutant GST-ESD4^C448S exhibited any de-SUMOylation activity. In protein turnover experiments, SnRK2.6 exhibited markedly enhanced half-life in siz1 compared with Col, indicating that SIZ1-dependent SUMOylation promotes SnRK2.6 turnover. Phenotypically, snrk2.6 mutants were completely insensitive to ABA-induced stomatal closure; siz1 mutants displayed pronounced hypersensitivity; and the snrk2.6 siz1 double mutant phenocopied snrk2.6—showing no significant response to ABA beyond that of the snrk2.6 mutant. These data indicate that SIZ1 acts as a negative regulator of ABA-triggered stomatal closure and SnRK2.6 functions as a positive regulator, and the inhibitory activity of SIZ1 is strictly dependent on SnRK2.6, placing SnRK2.6 genetically upstream of SIZ1 in the ABA signaling pathway. ConclusionSnRK2.6 undergoes SUMOylation, although the specific SUMOylation sites have not been defined. SnRK2.6 is dynamically regulated by reversible SUMOylation—catalyzed by SIZ1 and reversed by ESD4—which controls its protein stability. SUMOylation acts as a destabilizing signal for SnRK2.6, and SIZ1 exerts its negative effect on ABA-triggered stomatal closure probably through promoting SnRK2.6 degradation via SUMOylation. These findings uncover SUMOylation as a critical regulatory layer fine-tuning SnRK2.6 abundance in ABA signaling.

OBJECTIVE To study the quality standard of the ethnic medicine Diplazium lanceum， and to provide reference for its quality control.METHODS The medicinal material of D. lanceum was identified by properties， microscopy， and thin-layer chromatography（TLC）， and its moisture， ash， and extract contents were determined. The contents of chlorogenic acid and rutin in 10 batches of D. lanceum were determined by high-performance liquid chromatography . RESULTS The rhizome of D. lanceum is slender and creeping， the leaf is leathery and shriveled， and yellow sporangia are borne on the abaxial surface of the leaf. The transverse section of the leaf shows inclusions， sclerenchyma， phloem cells， etc.； the transverse section of the petiole shows ground tissue， sclerenchyma， endodermis， etc.； the transverse section of the rhizome shows ground tissue， tracheids， vascular bundles， etc.； and the powder shows spiral vessels and brown inclusions. The TLC identification results showed that the chromatogram of the test sample exhibited spots of the same color at the corresponding positions as the chromatogram of the chlorogenic acid reference substance. The content ranges of moisture， total ash， acid-insoluble ash， extract， chlorogenic acid， and rutin in the 10 batches of samples were 10.18%-12.43%， 7.08%-19.12%， 0.95%-10.62%， 14.13%-26.05%， 0.113 1-1.015 9 mg/g， and 0.009 9-0.208 9 mg/g， respectively. CONCLUSIONS In the quality standard of D. lanceum， the moisture content should be ≤12.5%， total ash content should be ≤20.0%， acid-insoluble ash content should be ≤11.0%， extract content should be ≥14.0%， and chlorogenic acid content should be ≥0.11 mg/g. The established method is simple， specific， and reproducible， and can provide a scientific basis for the quality control of D. lanceum.

Objective To investigate the effects of combined exposure to benzene series, dust and noise on occupational high-frequency hearing loss (HFHL) in the electronics manufacturing industry. Methods A total of 740 employees from an electronic manufacturing enterprise were selected as the study subjects. According to the detection of occupational hazard factors, they were divided into noise group, noise benzene group, and noise dust group, with 325, 167, and 248 people, respectively. Occupational health examinations were conducted on the study participants to analyze their HFHL detection status and influencing factors. Results Among all participants (n=740), 456 (61.62%) were male, 284 (38.38%) were female, and 123 (15.62%) were detected with HFHL. The detection rate of HFHL increased with age and length of service (P<0.01). According to the exposure factor grouping, the detection rates of HFHL in the noise group, noise benzene group, and noise dust group were 12.00%, 19.16%, and 20.97%, respectively (P<0.05). Multivariate logistic regression analysis showed that workers aged ≥ 40 years, with 10-20 years of work experience, ≥ 20 years of work experience, exposure to noise and benzene series, and exposure to noise and dust had an increased risk of developing HFHL to 1.734, 1.923, 3.071, 1.706, and 1.527, respectively (P<0.05). Conclusion Combined exposure to noise and benzene series, combined exposure to noise and dust, as well as age and extended length of service may increase the risk of HFHL among workers.

Objective: To explore the current status and influencing factors of eating behaviors in adolescents, so as to provide a theoretical foundation for health promotion education among adolescents. Methods: Based on the database from Survey of Chinese Family Health Index (2021), by a random number table method, 1 065 teenagers were selected from the provincial capitals of 22 provinces and 5 autonomous regions in China, as well as 4 municipalities directly under the central government. A general characteristic questionnaire, Patient Health Questionnaire-9 (PHQ-9), Short Form of the Family Health Scale (FHS-SF), 10-item Short Version of the Big Five Personality(BFP-10), Content-based Media Exposure Scale (CM-E) and Sakata Eating Behavior Scale Short Form(EBS-SF) were used to collect information. Multivariate stepwise linear regression analysis was employed to identify and analyze related factors of eating behaviors among adolescents. Receiver operating characteristic was used to validate the predictive ability of the EBS-SF score for overweight and obesity among adolescents. Results: The average scores of BFI-10,C-ME, FHS-SF, PHQ-9 and EBS-SF were (33.08±4.64)(19.20±4.55)(38.48±6.65)(6.09±5.63)(16.75±4.36), respectively. Multivariate linear regression showed that family type (other types), agreeableness, conscientiousness, family health and depression were the main related factors of EBS-SF scores among adolescents( B =2.61,-0.42,0.20,-0.11,0.23, P <0.05).The analysis of receiver operating characteristic curve showed that the EBS-SF scores had a good ability in predicting obesity among male adolescents ( AUC= 0.73, P <0.01). Conclusions Family type, big five personality, family health,depression are the related factors of eating behaviors among adolescents. EBS-SF scores are predictive of obesity in adolescents, which would provide a new perspective for promoting healthy eating habits among adolescents.

Background The prevalence of low back pain among workers using vibrating tools in the automobile manufacturing industry is high; however, research on associated risk factors remains limited. Objective To investigate the association between use of vibrating tools and low back pain among automobile manufacturing workers, and to estimate related population attributable risk percentage (PAR%). Methods A cross-sectional survey was conducted using the Chinese Musculoskeletal Disorders Questionnaire among workers with over one year of service in an automobile manufacturing enterprise. Workers were categorized into an exposed group (vibrating tool users) and a control group (non-users) based on their use of vibrating tools during work. The variables showing statistically significant differences between the two groups were selected as covariates for matching by 1∶2 nearest-neighbor propensity score. Chi-square test was used to compare the prevalence of low back pain between the matched exposed and control groups. Log-binomial regression model was employed to calculate the prevalence ratio (PR), and the PAR% of low back pain attributable to vibrating tool use was subsequently determined. Results A total of 6973 valid questionnaires were collected, comprising 5676 males and 1297 females, with an overall low back pain prevalence of 40.3% (2809/6973). The exposed group included 1255 workers (1134 males, 121 females), with a mean age of (44.2 ± 8.7) years and a mean tenure in the current position of (23.5 ± 9.9) years; the matching control group consisted of 2510 workers (2279 males, 231 females), with a mean age of (44.7 ± 8.6) years and a mean tenure in the current position of (24.0 ± 10.0) years. The prevalence of low back pain was 76.7% (963/1255) in the exposed group, significantly higher than the 29.9% (750/2510) in the control group (P<0.001). The log-binomial regression analysis showed a PR of 2.57 (95%CI: 2.28, 2.90) for the exposed group, with a PAR% of 22.03%. Conclusion The use of vibrating tools among automobile manufacturing workers is positively associated with reporting low back pain. Implementing effective measures to mitigate vibration hazards is crucial for reducing the burden of low back pain in this population.

ObjectiveTo study the mechanism by which Shexiang Tongxin dropping pills （STDP） ameliorate the dysfunction of coronary microvascular endothelial cells in the rat model of heart failure. MethodsThe heart failure model was established by ligation of the left anterior descending coronary artery in rats， which were then allocated into sham， model， STDP， and telmisartan （TLM） groups and treated for 21 days. The heart function was detected by echocardiography， and the levels of myocardial injury markers， nitric oxide （NO）， endothelin-1 （ET1）， and angiotensinⅡ （AngⅡ） were determined by enzyme-linked immunosorbent assay （ELISA）. The protein levels of endothelial nitric oxide synthase （eNOS） and inducible nitric oxide synthase （iNOS） were determined by Western blot. The model of cardiac microvascular endothelial cell injury was established by AngⅡ induction and then treated with the STDP-containing serum （5%， 10%， and 20%） for 24 h. The levels of NO and ET1 were measured by ELISA. Western blot was employed to determine the protein levels of eNOS， iNOS， angiotensin-converting enzyme 2 （ACE2）， and angiotensinⅡ receptor 2 （AT2）. MLN-4760， an ACE2 inhibitor， was used to explore the mechanism underpinning the regulatory effect of STDP on the ACE2-AT2/MAS pathway. ResultsCompared with the sham group， the model group showed decreases in left ventricular ejection fraction （LVEF） and left ventricular fractional shortening （LVFS） （P<0.05）， a decline in serum NO level， elevations in serum AngⅡ and ET1 levels， a reduction in p-eNOS/eNOS ratio， and up-regulation in iNOS expression （P<0.05）. Compared with the model group， STDP increased LVEF， LVFS， and cardiac output （P<0.05）， raised the level of NO and lowered the levels of AngⅡ and ET1 in the serum （P<0.05）， increased the p-eNOS/eNOS value， and inhibited iNOS expression （P<0.05）. Compared with the AngⅡ group， STDP increased the NO content and decreased the ET1 content in endothelial cells （P<0.05）， increased the p-eNOS/eNOS ratio， and inhibited the iNOS expression （P<0.05）. The ACE2 inhibitor MLN-4760 reversed the regulatory effects of STDP on p-eNOS， eNOS， and iNOS. ConclusionSTDP improves the cardiac function in the rat model of heart failure， enhances the synthesis and release of NO in cardiac microvascular endothelial cells， reduces AngⅡ and ET1 levels， and regulates the expression of p-eNOS and eNOS， thereby ameliorating the dysfunction of microvascular endothelial cells in heart failure. This mechanism is related to the upregulation of the expression of proteins in the ACE2-AT2/MAS pathway.

Objective: To explore the network structure of eating behaviors with anxiety, depression and perceived stress in adolescents, so as to provide a basis for effective prevention and intervention of eating behavior problems and negative emotions in adolescents. Methods: Based on the Psychology and Behavior Investigation of Chinese Residents (2021) database, the study was conducted among 3 087 adolescents. Sakata Eating Behavior Scale Short From(EBS-SF) was used to investigate their eating behaviors. The Patient Health Questionnaire-9(PHQ-9), Generalized Anxiety Disorder Scale-7 Item(GAD-7), and Perceived Stress Questionnaire-3 Item (PSQ-3) were used to evaluate their depression, anxiety and perceived stress. Network analysis method was applied to construct a network of eating behaviors and negative emotional symptoms among adolescents, so as to evaluate the centrality, bridge strength, stability and accuracy of each item. Results: The total scores of eating behaviors, depression,anxiety and stress perception in adolescents were 17.41±4.53,6.95±6.08,4.86±5.03,9.34±3.80,respectively. The symptom with the highest intensity and expected impact was "I am only satisfied when I buy more food than I need", with a node intensity and expected impact value of 4.37. The nodes Depression and Anxiety were the most closely connected(weight=0.87). There were no statistically significant differences in the network structure( M =0.13,0.11) and network connection strength(female and male:4.16,4.06, s =0.10;urban and rural areas:4.08,4.07, s =0.01) between different sexes and residents ( P >0.05). Conclusion The negative impact of comorbidities such as anxiety, depression, perceived stress and eating behaviors among adolescents can be reduced through targeted prevention and intervention of core symptoms and bridging symptoms.

OBJECTIVE: To explore the accuracy of human-computer interaction software in identifying and locating type C1 distal radius fractures. METHODS: Based on relevant inclusion and exclusion criteria, 14 cases of type C1 distal radius fractures between September 2023 and March 2024 were retrospectively analyzed, comprising 3 males and 11 females(aged from 27 to 82 years). The data were assigned randomized identifiers. A senior orthopedic physician reviewed the films and measured the ulnar deviation angle, radial height, palmar inclination angle, intra-articular step, and intra-articular gap for each case on the hospital's imaging system. Based on the reduction standard for distal radius fractures, cases were divided into reduction group and non-reduction group. Then, the data were sequentially imported into a human-computer interaction intelligent software, where a junior orthopedic physician analyzed the same radiological parameters, categorized cases, and measured fracture details. The categorization results from the software were consistent with manual classifications (6 reduction cases and 8 non-reduction cases). For non-reduction cases, the software performed further analyses, including bone segmentation and fracture recognition, generating 8 diagnostic reports containing fracture recognition information. For the 6 reduction cases, the senior and junior orthopedic physicians independently analyzed the data on the hospital's imaging system and the AI software, respectively. Bone segments requiring reduction were identified, verified by two senior physicians, and measured for displacement and rotation along the X (inward and outward), Z (front and back), and Y (up and down) axes. The AI software generated comprehensive diagnostic reports for these cases, which included all measurements and fracture recognition details. RESULTS: Both the manual and AI software methods consistently categorized the 14 cases into 6 reduction and 8 non-reduction groups, with identical data distributions. A paired sample t-test revealed no statistically significant differences (P>0.05) between the manual and software-based measurements for ulnar deviation angle, radial ulnar bone height, palmar inclination angle, intra-articular step, and joint space. In fracture recognition, the AI software correctly identified 10 C-type fractures and 4 B-type fractures. For the 6 reduction cases, a total of 24 bone fragments were analyzed across both methods. After verification, it was found that the bone fragments identified by the two methods were consistent. A paired sample t-tests revealed that the identified bone fragments and measured displacement and rotation angles along the X, Y, and Z axes were consistent between the two methods. No statistically significant differences(P>0.05) were found between manual and software measurements for these parameters. CONCLUSION Human-computer interaction software employing AI technology demonstrated comparable accuracy to manual measurement in identifying and locating type C1 distal radius fractures on CT imaging.
Humans ; Male ; Female ; Radius Fractures/surgery* ; Middle Aged ; Adult ; Aged ; Aged, 80 and over ; Tomography, X-Ray Computed/methods* ; Retrospective Studies ; Software ; Wrist Fractures