Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Lung transplantation is the ultimate therapeutic option for end-stage pulmonary diseases such as interstitial pneumonia, chronic obstructive pulmonary disease and pneumoconiosis. Currently, the shortage of allogeneic lung donors significantly limits the opportunity for end-stage lung disease patients to receive lung transplantation. In recent years, with the rapid development of biomedical engineering technologies, especially the major breakthroughs in genetic modification and cloning, xenogeneic lung transplantation has shown important potential for clinical translation. Among them, genetically modified pigs have become the most promising xenogeneic lung source due to the close similarity of organ size and physiological characteristics to humans, and the ability to perform targeted gene knockouts (such as α-Gal antigen knockout) to reduce the occurrence of hyperacute rejection. This article focuses on the research progress of porcine xenogeneic lung transplantation, systematically reviews the latest achievements and challenges in animal experiments and human trials, and introduces the technical experience accumulated by Shenzhen Third People's Hospital in the porcine-to-monkey xenogeneic lung transplantation model, in the hope of providing practical references for future research in this field.

Aim To investigate the effect of kudinoside D(KD-D)on palmitic acid(PA)-induced lipid depo-sition in hepatocytes.Methods Mouse hepatocytes AML-12 were cultured and randomly divided into the Control group,PA group,PA+KD-D 20 μmol·L-1 group,PA+KD-D 40 μmol·L-1 group and PA+KD-D 80 μmol·L-1 group.AML-12 cells in PA and KD-D groups were treated with PA(0.4 mmol·L-1)for 24 h.AML-12 cells in KD-D groups were incubated with KD-D for 1 h before stimulation with PA.MTT as-say was used to detect cell survival rate,oil red O stai-ning and transmission electron microscopy were used to detect lipid deposition in cells,DCFH-DA fluorescence probe was used to detect intracellular reactive oxygen species(ROS)and MitoSOX mitochondrial superoxide red fluorescence probe was used to detect mitochondrial superoxide content in cells.Results KD-D at differ-ent concentrations improved PA-induced changes in cell morphology significantly.Compared with the Con-trol group,cells in PA group showed a significant in-crease in intracellular lipid droplets.Compared with PA group,the red lipid droplets in KD-D groups de-creased.The results of transmission electron microsco-py demonstrated that KD-D reduced PA-induced hepat-ic steatosis and improved ultrastructure.In addition,KD-D significantly decreased PA-induced cellular ROS level(P＜0.01)and reduced mitochondrial superox-ide content(P＜0.01).Conclusion KD-D inhibits PA-induced lipid deposition by regulating the cellular oxidative stress levels in AML-12 cells.

Objective To investigate the efficacy of antibiotic cement column combined with iliac bone graft in the treat-ment of open fracture with bone defect of distal femur.Methods From October 2014 to March 2021,16 patients of open frac-ture bone defect of distal femur were treated with antibiotic bone cement column and iliac bone graft,including 12 males and 4 females.The age ranged from 28 to 68 years old.There were 11 cases of traffic accident injury,5 cases of falling injury,3 cases as Gustilo type Ⅰ,5 cases as type Ⅱ and 8 cases as type Ⅲ A.AO classification was used:9 cases of C2 type and 7 cases of C3 type.The time from injury to final bone grafting ranged from 4 to 119 days.The length of bone defect ranged from 2 tol0 cm.Fractures healing time,complications and knee function Merchan score were recorded.Results All the 16 patients were fol-lowed up from 9 to 29 months.The incisions of 16 patients healed in one stage without postoperative infection,plate fracture,limb shortening and valgus and varus deformity.The healing time randed from 4 to 10 months.Knee joint function according to the Merchant scoring standard,showed that 8 cases were excellent,4 cases were good,3 cases were fair,and 1 case was poor.Conclusion The use of antibiotic bone cement column combined with iliac bone graft in the treatment of open and complex bone defects of distal femur is an effective surgical method to prevent infection,assist fracture reduction,increase fixation strength and significantly reduce the amount of bone grafting.

Objective To investigate the effect of long non-coding RNA(lncRNA)antisense transcript of SATB2 protein(SATB2-AS1)on the biological function of lung adenocarcinoma cells and its mechanism.Methods Tumor tissues and adjacent tissues from 25 patients with lung adenocarcinoma were collected to detect the expression of SATB2-AS1.Then,the overexpression vector of lncRNA SATB2-AS1(pcDNA-SATB2-AS1)and shRNA or shRNA of IGF2BP2(sh-SATB2-AS1;sh-IGF2BP2)and/or shRNA of SLC7A11(sh-SLC7A11)were transfected into lung adenocarcinoma cell A549.RIP assay was used to estimate the binding of IGF2BP2 protein to SATB2-AS1 or SLC7A11 mRNA,respectively;CCK-8 and Transwell assay were used to detect the proliferation and invasion ability of lung adenocarcinoma cells;RT-qPCR and Western blot assay were used to detect gene expression and protein expression,respectively.Results Compared with adjacent tissues and human bronchial epithelial cell BEAS-2B,the expression of SATB2-AS1 was significantly down-regulated in tumor tissues of patients with lung adenocarcinoma and lung adenocarcinoma cells(P<0.01).Overexpression of SATB2-AS1 significantly inhibited the proliferation and invasion of A549 cells,while silencing SATB2-AS1 significantly promoted the cell proliferation and invasion(P<0.05).Moreover,overexpression of SATB2-AS1 significantly reduced Fe2+concentration,reactive oxygen species(ROS)level,and malondialdehyde(MDA)content in A549 cells(P<0.01),and increased glutathione(GSH)content,the expression of SLC7A11 and GPX4 which were the key proteins of ferroptosis(P<0.01).Meanwhile,SATB2-AS1 significantly promoted IGF2BP2 protein binding to SLC7A11 mRNA by binding to IGF2BP2 protein,and reduced the stability of SLC7A11 mRNA(P<0.01).Silencing SLC7A11 significantly reversed the effects of silencing SATB2-AS1 on A549 cells.Conclusion LncRNA SATB2-AS1 destabilizes SLC7A11 mRNA by recruiting IGF2BP2 protein,induces the ferroptosis of lung adenocarcinoma cells,inhibits the cell proliferation and invasion,and thus inhibits the progression of lung adenocarcinoma.

Objectives:To evaluate the coronary microcirculatory function in patients with hypertrophic cardiomyopathy(HCM). Methods:Patients who diagnosed with HCM and underwent the measurement of index of microcirculatory resistance(IMR)using pressure-sensing guide wire from November 2021 to April 2023 were prospectively included.Coronary microcirculatory dysfunction(CMD)was defined as IMR≥25 U and patients were grouped accordingly to compare the clinical characteristics. Results:A total of 25 HCM patients were included.Mean age was(58.4±13.3)years,18 were men and mean body mass index was(26.7±3.6)kg/m2.Coronary microcirculatory function was successfully evaluated in all patients and the mean value of IMR was(30.5±15.3)U.There were 15 patients with CMD.Baseline clinical characteristics,laboratory examinations and medications were simialr between patients with and without CMD.The maximal left ventricular wall was significant thicker in patients with CMD compared with that in patients without CMD([20.2±2.8]mm vs.[16.9±2.3]mm,P=0.005).There was no significant difference in other echocardiographic parameters between two groups(all P>0.05).In the range of IMR value less than 50 U(n=22),there was a significant linear positive correlation between maximal left ventricular wall thickness and IMR(r=0.423,P=0.049).There was no significant difference in coronary flow reserve and fractional flow reserve between two groups. Conclusions:The severity of CMD is positively correlated with left ventricular wall thickness in HCM patients.

Objective:To analyze the correlation between body fat distribution measured by quantitative CT (QCT) and body mass index in adults receiving physical examination.Methods:It was a cross-sectional study. From January to December 2021, 3 205 adults undergoing physical examination who met the inclusion criteria and underwent chest CT and QCT examination in the health management discipline of Henan Provincial People′s Hospital were selected as the research objects. The general data were collected; and the subcutaneous fat area, visceral fat area, total abdominal fat area, liver fat content, abdominal obesity and fatty liver detection rate were measured by QCT. According to body mass index, the subjects were divided into normal group (18.5-<24.0 kg/m 2, 1 343 cases), overweight group (24.0-<28.0 kg/m 2, 1 427 cases) and obesity group (≥28.0 kg/m 2, 435 cases). One-way analysis of variance and χ2 test were used to compare the differences of QCT indexes among the three groups. Pearson and Spearman correlation analysis were used to evaluate the correlation between QCT indexes and body mass index. Receiver operating characteristic (ROC) curve was drawn to analyze the diagnostic effect of QCT on obesity and fatty liver. Results:Subcutaneous fat area, visceral fat area, total abdominal fat area, liver fat content, abdominal obesity and fatty liver detection rate in obese group were all significantly higher than those in overweight group and normal group [males, (147.60±46.44) vs (104.33±27.68), (73.46±22.65) cm 2; (297.46±54.70) vs (229.40±53.12), (159.57±49.68) cm 2; (445.06±70.24) vs (333.73±62.91), (233.02±61.87) cm 2; 11.30% (7.90%, 15.55%) vs 8.75% (6.50%, 11.70%), 6.60% (4.80%, 8.70%); 100.0% vs 96.0%, 64.0%; 92.9% vs 86.7%, 73.3%; females, (213.96±48.61) vs (155.85±35.31), (107.24±31.01) cm 2; (185.41±43.88) vs (142.48±41.75), (96.56±36.50) cm 2; (399.37±68.07) vs (298.33±56.86), (203.80±57.53) cm 2; 9.80% (6.90%, 13.30%) vs 7.30% (5.05%, 9.80%), 5.40%(3.50%, 7.20%); 96.4% vs 74.8%, 28.9%; 87.3% vs 75.6%, 56.5%], and were all positively correlated with body mass index (males, r/ rs=0.709, 0.738, 0.831, 0.402, 0.464, 0.225; females, r/ rs=0.798, 0.695, 0.841, 0.416, 0.605, 0.276) (all P<0.001). In both male and female subjects, the detection rates of obesity based on QCT were significantly higher than those based on body mass index (male, 86.9% vs 16.6%; female, 49.3% vs 8.9%), and the detection rates of fatty liver based on QCT were significantly higher than those based on ultrasound (male, 83.6% vs 57.1%; female, 65.2% vs 27.6%) (all P<0.001). ROC curve showed that when the visceral fat area of 142 cm 2 was used as the cut-off value for the diagnosis of obesity in male subjects, the sensitivity and specificity was 100% and 15.8%, respectively; and when the cut-off value of liver fat content 5.0% was used to diagnose fatty liver, the sensitivity and specificity was 88.9% and 25.1%, respectively. When the visceral fat area of 115 cm 2 was set as the cut-off value for the diagnosis of obesity in female subjects, the sensitivity and specificity was 96.4% and 55.3%, respectively; when the liver fat content of 5.0% was set as the cut-off value for the diagnosis of fatty liver, the sensitivity and specificity was 83.7% and 43.2%, respectively. Conclusions:The indexes of abdominal fat and liver fat measured by QCT in adults receiving physical examination are all positively correlated with body mass index. The effect of QCT in the diagnosis of obesity and fatty liver are both better than body mass index and ultrasound.

Objective:To analyze the distribution of body fat with quantitative computed tomography (QCT) in people with normal body mass index (BMI).Methods:A cross-sectional study was conducted in the physical examination population who underwent chest CT and QCT examination in the Department of Health Management, Henan Provincial People′s Hospital from January to December in 2021, and 1 395 physical examination subjects who met the inclusion criteria were selected as the research subjects. The subjects were divided into five groups according to their age. The general data of the subjects were collected. The total abdominal fat area (TFA), visceral fat area (VFA), subcutaneous fat area (SFA), total abdominal muscle area (TMA) and muscle fat content (MFC) in the subjects were measured by QCT. One-way analysis of variance, Welch test and Kruskal-Wallis test were used to compare the above QCT measurement indexes between the two genders among different age groups with normal BMI. Pearson correlation analysis was used to analyze the correlation between VFA and sarcopenia indexes. Multivariate linear regression was used to analyze the relationship between VFA and linear correlation variables in the related indicators of sarcopenia.Results:There were significant differences in TFA, VFA, TMA and SMI among different age groups in subjects with normal BMI (all P<0.05). Pearson correlation analysis showed that VFA was negatively correlated with TMA in some age groups (male: 18-39 years group: r=-0.351; 40-49 years group: r=-0.278; 60-69 years group: r=-0.245; female:40-49 years group: r=-0.251; 50-59 years group: r=-0.270;≥70 years group: r=-0.391; all P<0.01); it was negatively correlated with SMI (male: 18-39 years group: r=-0.352; 40-49 years group: r=-0.340; 50-59 years group: r=-0.266; 60-69 years group: r=-0.316; female: 40-49 years group: r=-0.240; 50-59 years group: r=-0.284; all P<0.001); it was positively correlated with MFC (male: 18-39 years group: r=0.342; 40-49 years group: r=0.291; female: 50-59 years group: r=0.133; 60-69 years group: r=0.284; all P<0.05). Multivariate linear regression analysis showed that VFA was independently and negatively correlated with SMI in both men and women after adjusting for age interference factors (male B=-1.881, t=-6.025, P<0.001; female B=-0.603, t=-2.887, P=0.004), and it was independently positively correlated with MFC (male B=1.230, t=4.271, P<0.001;female B=0.893, t=3.836, P<0.001). There was an independent negative correlation between VFA and TMA in male subjects ( B=0.263, t=2.478, P=0.013). Conclusions:VFA is correlated with TMA, SMI and MFC in people with normal BMI. Regardless of gender, SMI has a negative effect on VFA, and MFC has a positive effect on VFA.