Objective: To investigate the status of heat illness, knowledge awareness and adaptive behaviors of heat wave knowledge among food delivery riders, so as to provide a basis for optimizing heat wave response measures for food delivery riders. Methods: In November 2022, food delivery riders from a large food delivery platform in Ningbo City, Zhejiang Province were selected as survey subjects using a cluster sampling method. A self-designed electronic questionnaire was used to select demographic information, work status, lifestyle behaviors and disease history, heat illness status, knowledge awareness and adaptive behaviors of heatwave. Results: A total of 911 questionnaires were distributed, and 830 valid questionnaires were recovered, resulting in a valid response rate of 91.11%. Among the respondents, 796 (95.90%) were male, and 818 (98.55%) worked full-time. The mean age was (27.75±8.00) years. A total of 470 respondents (56.63%) had a work tenure of less than 1 year. The primary working hours were 8-<12 hours, with 504 people accounting for 60.72%. There were 108 cases of heatstroke, with an occurrence rate of 13.01%. And 286 people reported heat-related symptoms, with an occurrence rate of 34.46%. The overall awareness rate of heat wave knowledge was 73.22%, while the awareness rate of heat warning signal classification was relatively low at 9.04%. The heat wave cognition score was (5.86±1.31) points. There were statistically significant differences in heat wave cognition scores among food delivery riders of different ages, educational levels, family annual income, work tenures, and work durations (all P<0.05). Regarding positive adaptive behaviors, the number of riders paying attention to weather forecasts and actively learning about preventive measures was higher (734 people each, accounting for 88.43%). Regarding negative adaptive behaviors, the number of riders who often drank ice-cold beverages was higher (509 people, accounting for 61.33%). The heat wave adaptive behavior score was (6.88±1.77) points. There were statistically significant differences in adaptive behavior scores among riders with different educational levels, family annual income, work tenures, and smoking frequency (all P<0.05). Conclusions The occurrence rates of heatstroke and heat-related symptoms among food delivery riders are relatively high. The knowledge awareness and adaptive behaviors regarding heat wave are at a moderate level. It is suggested to strengthen health education, reinforce risk cognition of heat wave, and promote positive adaptive behaviors among food delivery riders.

BACKGROUND:Autologous bone,allogeneic bone or artificial bone has been used to promote bone defect repair in the clinic,but the rate of non-healing is still high.The key is to ignore the importance of periosteum in the bone healing process.In the early stage of the project,the project team constructed an electrospinning membrane loaded with vascular endothelial growth factor to highly simulate the intramembranous osteogenesis of natural periosteum at the bone defect site,which promoted bone regeneration to a certain extent.However,the injured area often faces the dilemma of severe inflammatory response mediated by macrophages and lack of seed cells,resulting in the risk of inactivation or diffusion of delivered biological factors.Therefore,it is necessary to further optimize and coordinate the immune regulation and angiogenesis functions of biomimetic periosteum to promote bone repair.OBJECTIVE:To investigate the physicochemical properties of stem cell-engineered bionic periosteum and its role in regulating the inflammatory microenvironment to promote bone repair.METHODS:By combining L-polylactic acid-based microsol electrospinning,type Ⅰ collagen self-assembly and gel stem cell transplantation technology,a bionic periosteum(M@C-B)was constructed,in which the core layer loaded with vascular endothelial growth factor and the shell layer delivered bone marrow mesenchymal stem cells to regulate the immune microenvironment of bone defects.The physicochemical properties of the periosteum were characterized by scanning electron microscopy,transmission electron microscopy,and Fourier transform infrared spectroscopy.A co-culture system was established between the bionic periosteum and macrophages,bone marrow mesenchymal stem cells and human umbilical vein endothelial cells to explore immune regulation and in vitro osteogenic and angiogenic abilities.Finally,the osteogenic properties of the stem cell engineered bionic periosteum were further verified in a rat femoral condyle defect model.RESULTS AND CONCLUSION:(1)Transmission electron microscopy results showed that the micro-sol electrospinning(MS)formed a distinct core-shell structure.Scanning electron microscopy indicated that after the assembly of the collagen-l artificial periosteum(M@C)on the surface of the vascular endothelial growth factor-loaded micro-sol,a distinct"spider web-like"fibrous structure was deposited.Infrared spectroscopy further confirmed the successful self-assembly of collagen-l.Release experiments demonstrated that the M@C group mitigated the burst release phenomenon compared to the MS group,maintaining internal vascular endothelial growth factor activity and sustained release.(2)Live/dead cell staining and CCK-8 assay showed that bone marrow mesenchymal stem cells proliferated well and survived on three types of artificial periosteum:MS,purely aligned poly(L-lactic acid)(PLLA)surface self-assembled collagen-l artificial periosteum(PLLA@C),and vascular endothelial growth factor-loaded micro-sol fiber surface self-assembled collagen-l-bone marrow mesenchymal stem cells artificial periosteum(M@C-B).Among them,the M@C-B group had the highest number of live cells and the fastest proliferation rate.(3)Alkaline phosphatase staining,alizarin red staining,and osteopontin immunofluorescence staining showed that the PLLA@C and M@C-B groups significantly promoted osteogenic differentiation of bone marrow mesenchymal stem cells.Angiogenesis experiments demonstrated that the vascular endothelial growth factor-loaded groups(MS and M@C-B)had longer blood vessel lengths and more reticular vascular-like structures with more cross-linked nodes,with the M@C-B group being the most prominent.(4)Immunofluorescence and flow cytometry showed that artificial periosteum in the M@C-B group significantly inhibited the pro-inflammatory macrophage phenotype and promoted the polarization of macrophages towards the anti-inflammatory M2 phenotype.(5)In vivo studies further confirmed that the M@C-B group showed superior bone mineral density,trabecular thickness,relative bone volume,and trabecular spacing compared to other groups.(6)These results indicate that bone marrow mesenchymal stem cell-engineered artificial periosteum,through the rapid regulation of the bone defect immune microenvironment by the collagen-l-bone marrow mesenchymal stem cells outer phase and the sustained release of vascular endothelial growth factor by the micro-sol electrospinning core-shell structure of the inner phase,synergistically promotes bone healing.

BACKGROUND:Autologous bone,allogeneic bone or artificial bone has been used to promote bone defect repair in the clinic,but the rate of non-healing is still high.The key is to ignore the importance of periosteum in the bone healing process.In the early stage of the project,the project team constructed an electrospinning membrane loaded with vascular endothelial growth factor to highly simulate the intramembranous osteogenesis of natural periosteum at the bone defect site,which promoted bone regeneration to a certain extent.However,the injured area often faces the dilemma of severe inflammatory response mediated by macrophages and lack of seed cells,resulting in the risk of inactivation or diffusion of delivered biological factors.Therefore,it is necessary to further optimize and coordinate the immune regulation and angiogenesis functions of biomimetic periosteum to promote bone repair.OBJECTIVE:To investigate the physicochemical properties of stem cell-engineered bionic periosteum and its role in regulating the inflammatory microenvironment to promote bone repair.METHODS:By combining L-polylactic acid-based microsol electrospinning,type Ⅰ collagen self-assembly and gel stem cell transplantation technology,a bionic periosteum(M@C-B)was constructed,in which the core layer loaded with vascular endothelial growth factor and the shell layer delivered bone marrow mesenchymal stem cells to regulate the immune microenvironment of bone defects.The physicochemical properties of the periosteum were characterized by scanning electron microscopy,transmission electron microscopy,and Fourier transform infrared spectroscopy.A co-culture system was established between the bionic periosteum and macrophages,bone marrow mesenchymal stem cells and human umbilical vein endothelial cells to explore immune regulation and in vitro osteogenic and angiogenic abilities.Finally,the osteogenic properties of the stem cell engineered bionic periosteum were further verified in a rat femoral condyle defect model.RESULTS AND CONCLUSION:(1)Transmission electron microscopy results showed that the micro-sol electrospinning(MS)formed a distinct core-shell structure.Scanning electron microscopy indicated that after the assembly of the collagen-l artificial periosteum(M@C)on the surface of the vascular endothelial growth factor-loaded micro-sol,a distinct"spider web-like"fibrous structure was deposited.Infrared spectroscopy further confirmed the successful self-assembly of collagen-l.Release experiments demonstrated that the M@C group mitigated the burst release phenomenon compared to the MS group,maintaining internal vascular endothelial growth factor activity and sustained release.(2)Live/dead cell staining and CCK-8 assay showed that bone marrow mesenchymal stem cells proliferated well and survived on three types of artificial periosteum:MS,purely aligned poly(L-lactic acid)(PLLA)surface self-assembled collagen-l artificial periosteum(PLLA@C),and vascular endothelial growth factor-loaded micro-sol fiber surface self-assembled collagen-l-bone marrow mesenchymal stem cells artificial periosteum(M@C-B).Among them,the M@C-B group had the highest number of live cells and the fastest proliferation rate.(3)Alkaline phosphatase staining,alizarin red staining,and osteopontin immunofluorescence staining showed that the PLLA@C and M@C-B groups significantly promoted osteogenic differentiation of bone marrow mesenchymal stem cells.Angiogenesis experiments demonstrated that the vascular endothelial growth factor-loaded groups(MS and M@C-B)had longer blood vessel lengths and more reticular vascular-like structures with more cross-linked nodes,with the M@C-B group being the most prominent.(4)Immunofluorescence and flow cytometry showed that artificial periosteum in the M@C-B group significantly inhibited the pro-inflammatory macrophage phenotype and promoted the polarization of macrophages towards the anti-inflammatory M2 phenotype.(5)In vivo studies further confirmed that the M@C-B group showed superior bone mineral density,trabecular thickness,relative bone volume,and trabecular spacing compared to other groups.(6)These results indicate that bone marrow mesenchymal stem cell-engineered artificial periosteum,through the rapid regulation of the bone defect immune microenvironment by the collagen-l-bone marrow mesenchymal stem cells outer phase and the sustained release of vascular endothelial growth factor by the micro-sol electrospinning core-shell structure of the inner phase,synergistically promotes bone healing.

Purpose: To evaluate the efficacy and safety of modified four-flanged intrascleral fixation of foldable intraocular lenses (IOLs) using a 1-inch 30-gauge needle for extraocular suture threading. Methods: This retrospective case series included 20 eyes of 20 patients who underwent four-flanged intrascleral IOL fixation using a 1-inch 30-gauge needle, with at least 6 months of follow-up. We modified the original Canabrava technique by inserting a foldable IOL through a 2.4-mm clear corneal incision with a standard injector and performing extraocular suture threading with a 1-inch 30-gauge needle. Collected data included uncorrected visual acuity (UCVA), best-corrected visual acuity (BCVA), intraocular pressure, spherical equivalent (SE), prediction error (PE), and corneal and lens astigmatism. Postoperative complications and IOL centration were also evaluated. Results: Visual acuity improved significantly over the 6-month follow-up; mean preoperative logMAR UCVA was 1.25 ± 0.66 (Snellen equivalent, 20 / 355) and improved to 0.35 ± 0.19 (20 / 45), and logMAR BCVA improved from 0.53 ± 0.38 (20 / 70) to 0.15 ± 0.09 (20 / 30) (p < 0.05). The mean postoperative SE at 6 months was –0.61 ± 1.08 diopters, and PE was –0.25 ± 0.86 diopters. No significant changes in endothelial cell density were observed. Corneal astigmatism remained stable, and lens astigmatism was reduced after surgery, although not significantly. Postoperative complications included one case each of hypotony and vitreous hemorrhage, both resolved with medical therapy. No IOL redislocation, decentration, tilt, or flange-related issues occurred. Conclusions Modified four-flanged intrascleral IOL fixation using a 1-inch 30-gauge needle provides stable IOL fixation by pairing a robust suture with the smallest suitable needle. Extraocular suture threading reduces intraocular manipulation, simplifying the procedure and resulting in favorable visual outcomes and low complication rates.

Skeletal muscle atrophy is closely associated with oxidative stress-induced inflammatory responses,which lead to the activation of catabolic pathways and the loss of myotube integrity. Dillapiole, a phenylpropanoid compound derived from several aromatic plants, has been reported to exhibit anti-inflammatory and antioxidant properties, suggesting its potential benefits in conditions characterized by muscle wasting. This study aimed to investigate whether dillapiole attenuates hydrogen peroxide (H2O2 )-induced muscle atrophy in C2C12 myotubes and to elucidate its regulatory effects on key atrogenes. C2C12 myoblasts were differentiated into myotubes and then exposed to H2O2 to induce oxidative stress-mediated atrophy in the presence or absence of dillapiole. These findings indicate that dillapiole protects C2C12 myotubes against H2O2-induced muscle atrophy primarily by attenuating oxidative stress–associated inflammatory responses and suppressing the expression of Atrogin-1 and MuRF1.

Alzheimer’s disease (AD) is characterized by progressive cognitive deterioration and significant depression. However, the mechanisms linking depression to AD pathology remain unclear. Here, we investigated whether Notch2 signaling mediates depressionlike behaviors in presenilin-2 (PS2) N141I mutant mice, an early-onset AD model. PS2 wild-type (WT) and mutant (MT) mice aged 12-15 months were subjected to unpredictable chronic mild stress (UCMS) for 4 weeks, followed by sucrose preference, tail-hanging, and forced swimming tests. Behavioral assessments showed that UCMS exacerbated anhedonia and immobility only in PS2 MT mice. Molecular analysis revealed concomitant increases in plasma corticosterone, hippocampal γ-secretase activity, and Notch2 expression, and elevated total and phosphorylated glucocorticoid receptor levels in PS2 MT-UCMS mice. Gene expression profiling of human hippocampal datasets confirmed upregulation of NOTCH2 in Alzheimer’s disease and depression.Pharmacological inhibition of γ-secretase and Notch signaling with DAPT normalizes depressive behavior, reduces corticosterone release, attenuates GR phosphorylation, and inhibits Notch2 signaling in PS2 MT mice. These findings identify Notch2 as a pivotal mediator linking chronic stress to molecular changes associated with depression and AD, and suggest that targeting Notch2 signaling may provide therapeutic benefits for comorbid mood and neurodegenerative disorders.

Background: Radioactive iodine treatment (RAIT) is an essential therapy for differentiated thyroid cancer. However, unforeseen complications arising during thyroid hormone withdrawal (THW) can lead to Cancellation of the scheduled treatment. This study aimed to identify cases in which THW-RAIT was discontinued due to THW-related complications and to explore potentially preventable causes to improve patient management. Methods: Among 4,174 patients who underwent THW-RAIT between 2012 and 2024, 39 did not complete the planned treatment. After excluding Cancellations unrelated to THW, 11 (0.26%) patients with unexpected THW-related medical issues were analyzed. Results: The median age of the included patients was 61 years (range, 23 to 70), and 10 were male. The reasons for THW-RAIT Cancellation were hyponatremia (n=1), abnormal liver function (n=1), renal dysfunction (n=3), and combined liver and renal dysfunction (n=6). The patient with hyponatremia was taking a thiazide diuretic. Most cases of liver dysfunction were associated with prior use of herbal medications, whereas renal dysfunction was linked to diuretic or nonsteroidal anti-inflammatory drug use, pre-existing conditions such as single kidney or diabetic nephropathy, or inadequate oral intake during low-iodine preparation. Two cases of concurrent liver and renal dysfunction were attributed to rhabdomyolysis following intense exercise or heavy physical labor. Conclusion Enhanced patient education, comprehensive pre-treatment assessment, and careful avoidance of high-risk medications are essential to prevent THW-related complications and minimize disruptions in RAIT.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.