After continuous development and improvement, lung transplantation has become the preferred means to treat a variety of benign end-stage lung diseases. However, the field of lung transplantation still faces many challenges, including shortage of donor resources, preservation and maintenance of donor lungs, and postoperative complications. Lung tissue samples removed after lung transplantation are excellent clinical resources for the study of benign end-stage lung disease and perioperative complications of lung transplantation. However, at present, the collection, storage and utilization of tissue samples after lung transplantation are limited to a single study, and unified technical specifications have not been formed. Based on the construction plan of the biobank for lung transplantation in the First Affiliated Hospital of Xi'an Jiaotong University, this study reviewed the practical experience in the collection, storage and utilization of lung transplant tissue samples in the aspects of ethical review, staffing, collection process, storage method, quality control and efficient utilization, in order to provide references for lung transplant related research.

Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Supercooling preservation technology, as a groundbreaking innovation in the field of organ preservation, significantly reduces the metabolic rate of cells and inhibits ice crystal formation by placing organs in a low-temperature environment near or below the freezing point. This technology extends the preservation time of organs and maintains their biological activity. Compared with the traditional low-temperature preservation at 4 °C, supercooling preservation effectively avoids cell damage and the accumulation of metabolic products, demonstrating significant advantages in the preservation of cells, tissues and organs. In recent years, important progress has been made in the optimization of cryoprotectants, the application of antifreeze proteins, the improvement of vitrification technology, and the development of nanotechnology-based rewarming techniques. These advancements provide new pathways to address the challenges of toxicity, ice crystal formation and uneven rewarming rates during supercooling preservation. This review summarizes the basic principles of supercooling preservation, the application of key technologies, and their practical effects in organ transplantation. It also analyzes the challenges of toxicity and rewarming efficiency, aiming to provide theoretical support and research directions for the future optimization of organ low-temperature preservation technology and its clinical application.

Objective: To explore the mechanism of action of hepatic leukemia factor (HLF) in diabetes mellitus and to construct a conditional animal model of mice with islet β ⁃cell⁃specific HLF gene knockout. Methods: At the cellular level , the effects of HLF inhibition or overexpression on the proliferation of MIN6 cells was verified by the CCK⁃8 assay. The effects of HLF inhibition or overexpression were detected at the mRNA level and protein level by Cre + / - mice (C57BL/6J) to obtain offspring mice. The genotypes of the mice were identified by the PCR method.The differences in the expression levels of the HLF gene at the mRNA and protein levels in islet β ⁃cell knockout mice (HLFflox/flox Cre + / - ) and control mice (HLFflox/flox ) were detected by RT⁃qPCR technology and Western blot technology to verify the knockout effect. At the same time , the islet tissues of the mice in two groups were taken to make paraffin sections and analyzed by hematoxylin⁃eosin (HE) staining. Results: HLF gene inhibition or overex⁃pression had no significant effect on the proliferation of MIN6 cells. When the HLF gene was inhibited in MIN6 cells , the mRNA expression level decreased by 74% compared with the control group , and the protein expression level decreased by 60% compared with the control group. After overexpressing the HLF gene , the mRNA expres⁃sion level was 2. 13 times compared with that of the control group , and the protein expression level was 1. 8 times compared with that of the control group. The mRNA expression level of the HLF gene in the knockout mice de⁃creased by 89% compared with the control group , and the protein expression level decreased by 65% compared with the control group. The results of HE staining showed that there was no significant difference in the cell mor⁃phology in the islet tissues between the knockout mice and the control mice. Inhibiting HLF increased the glycogen content in MIN6 cells by approximately 20% . Conclusion The HLF gene knockout mice are successfully con⁃structed , providing an animal model for studying the role of HLF in the pathogenesis of diabetes mellitus.

Objective To investigate the clinical effects of different right lung volume reduction techniques when the donor lung is oversized and mismatched with the recipient. Methods Clinical data of 10 recipients who underwent right lung volume reduction lung transplantation at the First Affiliated Hospital of Xi'an Jiaotong University from October 2022 to June 2024 were collected, including gender, age, primary disease type, and type of transplantation. A retrospective analysis was performed on postoperative complications within 90 days, duration of mechanical ventilation, hospital stay, and survival status to explore the impact of different volume reduction techniques on the survival rate of lung transplant recipients. Results A total of 10 right lung volume reduction recipients were included in this study, with 2 cases of upper lobe reduction, 7 cases of middle lobe reduction, and 1 case of lower lobe reduction. Three recipients developed airway complications (one each with upper, middle, and lower lobe reduction). The 30-day survival rate was 90% and the 1-year survival rate was 70%. One recipient with upper lobe reduction died of septic shock during the perioperative period, one with lower lobe reduction died of airway anastomotic fistula 2 months after surgery, and one with middle lobe reduction died of renal insufficiency 1 year after surgery. All 7 recipients with middle lobe reduction successfully passed the perioperative period, with one case of airway anastomotic stenosis (1/7). The average duration of mechanical ventilation was 71 hours, and the average hospital stay was 26 days. The 30-day survival rate was 7/7, and the 1-year survival rate was 6/7. Conclusions Middle lobe reduction in right lung transplantation surgery has the advantages of low incidence of airway complications, good safety, and minimal loss of lung function, and may be a better right lung volume reduction option with potential for application.

In China, most patients with hepatocellular carcinoma (HCC) have progressed to the middle and advanced stages when they are diagnosed, so early-stage diagnosis is a significant key to improving the prognosis. Tumor diameter significantly correlates with the prognosis of patients with small hepatocellular carcinoma (sHCC), which is further classified as early-stage HCC (eHCC) and advanced HCC (pHCC). The "fast in and fast out" enhancement pattern is a typical feature of liver cancer imaging (CECT/CEMRI/CEUS); yet, eHCC with a diameter of <2 cm frequently exhibits hypovascularity. Hepatocyte-specific enhanced MRI (EOB-MRI) displays a unique hepatobiliary-specific phase (HBP) hypointensity, along with atypical manifestations such as lipid-containing nodules, T2 hyperintensity, and restricted diffusion. HBP is a functional radiographic imaging feature for cancerous nodules in cirrhosis. EOB-MRI can significantly increase the hypovascularity detection rate of eHCC in conjunction with serologic markers like alpha-fetoprotein. With a focus on the dynamic changes in hypovascular hypointense nodules in HBP (including diameter size, APHE, DWI, and other parameters), it is recommended that high-risk cirrhotic cohorts undergo routine monitoring (EOB-MRI follow-up every three months) to diagnose early-stage eHCC, based on the existing evidence-based medicine. This recommendation in clinical practice guidelines provides a crucial strategy that can markedly enhance patients' five-year survival rates.

Objective To explore the feasibility and safety of bilateral uterine artery embolization(UAE)via distal radial artery access.Methods Thirty patients who underwent bilateral UAE were selected.They were divided into distal radial artery group(14 cases)and femoral artery group(16 cases).The clinical signs,puncture times,operation time,compression hemostasis time,discomfort scores,microcatheter non-use rates,and complication rates of the two groups were analyzed,the feasibility and safety of bilateral UAE via distal radial artery access were evaluated.Results The mean number of puncture times in the distal radial artery group was 1.6 times that of the femoral artery group,and the puncture pain score was 1.5 times that of the femoral artery group(P＜0.05).The operation time and puncture point compression hemostasis time in the distal radial artery group were shorter than those in the femoral artery group,and the discomfort score of compression hemostasis in the distal radial artery group was lower than that in the femoral artery group(P＜0.01).The proportions who did not use microcatheters in the two groups accounted for 28.6％and 6.3％,respectively,the difference was not statistically significant(P＞0.05).Four patients with poor access vessels were found in the distal radial artery group(P＜0.05).Conclusion Bilateral UAE via distal radial artery access is safe and feasible.

Objective:To explore the factors associated with the efficacy of high-frequency repetitive transcranial magnetic stimulation (rTMS) in the treatment of neuropathic pain (NP) following spinal cord injury (SCI).Methods:This was a retrospective study of 89 SCI survivors with NP receiving high-frequency rTMS. Those with a ≥30% reduction in their Numeric Rating Scales (NRS) scores after 2 weeks of treatment were termed Responders ( n=36), with the others classified as non-responders ( n=53). Demographic data (gender, education level, age), SCI characteristics (injury etiology, injury severity, neurological injury level, injury duration), NP characteristics (pain type, pain intensity, analgesic use), functional assessment (Modified Ashworth Scale score, Spinal Cord Independence Measure score, Modified Barthel Index score, American Spinal Injury Association motor/sensory score) were collected. Least absolute shrinkage and selection operator (LASSO) regression was used for variable selection, followed by binary logistic regression to identify factors associated with treatment efficacy. Results:Among the 89 patients, 36 (40.4%) were Responders to high-frequency rTMS. Binary logistic regression revealed that those with a cervical spinal cord injury and/or spasticity and women were more likely to respond to high-frequency rTMS.Conclusions:Female gender, cervical spinal cord injury, and spasticity are independent factors predicting rTMS efficacy in treating SCI, with spasticity demonstrating the strongest association.

Objective:To explore the factors associated with the efficacy of high-frequency repetitive transcranial magnetic stimulation (rTMS) in the treatment of neuropathic pain (NP) following spinal cord injury (SCI).Methods:This was a retrospective study of 89 SCI survivors with NP receiving high-frequency rTMS. Those with a ≥30% reduction in their Numeric Rating Scales (NRS) scores after 2 weeks of treatment were termed Responders ( n=36), with the others classified as non-responders ( n=53). Demographic data (gender, education level, age), SCI characteristics (injury etiology, injury severity, neurological injury level, injury duration), NP characteristics (pain type, pain intensity, analgesic use), functional assessment (Modified Ashworth Scale score, Spinal Cord Independence Measure score, Modified Barthel Index score, American Spinal Injury Association motor/sensory score) were collected. Least absolute shrinkage and selection operator (LASSO) regression was used for variable selection, followed by binary logistic regression to identify factors associated with treatment efficacy. Results:Among the 89 patients, 36 (40.4%) were Responders to high-frequency rTMS. Binary logistic regression revealed that those with a cervical spinal cord injury and/or spasticity and women were more likely to respond to high-frequency rTMS.Conclusions:Female gender, cervical spinal cord injury, and spasticity are independent factors predicting rTMS efficacy in treating SCI, with spasticity demonstrating the strongest association.