Objective:To assess the effectiveness of a 6-month Ba Duan Jin exercise program in improving the balance of community-dwelling older adults.Methods:A two arms, parallel-group, cluster randomized controlled trial was conducted in 1 028 community residents aged 60-80 years in 40 communities in 5 provinces of China. Participants in the intervention group (20 communities, 523 people) received Ba Duan Jin exercise 5 days/week, 1 hour/day for 6 months, and three times of falls prevention health education, and the control group (20 communities, 505 people) received falls prevention health education same as the intervention group. The Berg balance scale (BBS) score was the leading outcome indicator, and the secondary outcome indicators included the length of time of standing on one foot (with eyes open and closed), standing in a tandem stance (with eyes open and closed), the closed circle test, and the timed up to test.Results:A total of 1 028 participants were included in the final analysis, including 731 women (71.11%) and 297 men (28.89%), and the age was (69.87±5.67) years. After the 3-month intervention, compared with the baseline data, the BBS score of the intervention group was significantly higher than the control group by 3.05 (95% CI: 2.23-3.88) points ( P<0.001). After the 6-month intervention, compared with the baseline data, the BBS score of the intervention group was significantly higher than the control group by 4.70 (95% CI: 4.03-5.37) points ( P<0.001). Ba Duan Jin showed significant improvement ( P<0.05) in all secondary outcomes after 6 months of exercise in the intervention group compared with the control group. Conclusions:This study showed that Ba Duan Jin exercise can improve balance in community-dwelling older adults aged 60-80. The longer the exercise time, the better the improvement.

Objective:To compare the clinical efficacy of rotator cuff repair combined with transposition of the long head of the biceps tendon in the treatment of massive rotator cuff tears with or without subscapularis injury.Methods:A total of 73 patients with massive rotator cuff tears who underwent arthroscopic rotator cuff repair combined with transposition of the long head of the biceps tendon in the Department of Upper Arm, Sichuan Orthopaedic Hospital from January 2019 to September 2022 were retrospectively analyzed, including 35 males and 38 females, aged 58.8±7.6 years (range, 46-73 years). There were 11 cases on the left side and 62 cases on the right side. Causes of injuries: 6 cases of car accidents, 13 cases of fall injuries, 54 cases of no obvious cause of injury. The patients were divided into subscapularis injury group (37 cases) and no subscapularis injury group (36 cases) according to the subscapularis injury or not. The visual analogue scale (VAS), Constant - Murley score, University of California Los Angeles (UCLA) shoulder score and range of motion were used to evaluate shoulder pain and functional improvement. MRI of the shoulder was taken at the final follow-up and the rotator cuff was assessed for retear using Sugaya grading.Results:All patients successfully completed the operation. The VAS score at 1 year postoperatively in the group without subscapularis injury was 0.58±0.87, which was less than 1.16±1.14 in the group with subscapularis injury ( t=-2.426, P=0.018). The Constant-Murley score and UCLA score at 1 year postoperatively in the group without subscapularis injury were 94.03±6.19 and 32.94±2.59, respectively, which were greater than those of the group with subscapularis injury, which were 86.51±11.96 and 30.38±3.33, and the difference was statistically significant ( P<0.05). Anterior flexion and body external rotation at 1 year postoperatively in the group without subscapularis injury were 137.22°±26.79° and 54.72°±13.20°, which were greater than those in the group with subscapularis injury of 121.08°±22.83° and 38.65°±17.19°, and the difference was statistically significant ( P<0.05), and the difference between the two groups in body internal rotation was not statistically significant ( P>0.05). The subacromial spacing at 1 year postoperatively was 9.4±1.3 mm in the group without subscapularis injury and 9.0±1.5 mm in the group with subscapularis injury, and the difference was not statistically significant ( t=1.318, P=0.192). There were 2 cases of rotator cuff retear 1 year after surgery without subscapular muscle injury and 5 cases of subscapular muscle injury. Conclusion:The clinical efficacy of arthroscopic rotator cuff repair combined with transposition of the tendon of the long head of the biceps tendon in the treatment of massive rotator cuff tears with or without subscapularis muscle injury is satisfactory, and the improvement of pain and function is more obvious in patients without subscapularis muscle injury.

Opioid analgesics are currently known as the best analgesics. However， toxicity and side effects such as constipation， tolerance and addiction severely limit their clinical application. With the in-depth understanding of the signal transduction mechanism of opioid receptors and the continuous advancement of drug design technology， researchers have managed to develop many promising new methods to get low-toxic and more efficient opioid analgesics， which are different from the traditional morphine skeleton structure modifications. This article focuses on three new research strategies of G-protein biased activation，“ one drug-multiple targets” and peripheral activation. The basic principles of relative separation of analgesic activity and adverse drug reaction by each strategy are introduced， and the latest research progress of representative drugs is briefly reviewed. Among them， the recently approved novel opioid analgesics oliceridine and tegileridine are G-protein biased μ-opioid receptor agonists， Cebranopadol is a typical “one drug-multiple targets” analgesic， and NFEPP is a representative drug of peripheral opioid receptor agonists. The above several strategies complement each other and provide reference for the development of new opioid analgesic drugs.

It is believed that the basic pathogenesis of oculomotor nerve paralysis （ONP） is qi and blood depletion and channel obstruction. Taking channel pattern differentiation as the core， it is recommended to use acupuncture mainly based on location， syndrome and channel deficiency-excess differentiation. Location and channel tropism differentiation mainly follows the principle of “where the channels and collaterals pass， the main treatment can reach”， and commonly uses acupuncture points on Dumai （督脉）， the hand Shaoyang （少阳） Sanjiao （三焦） channel， the hand Taiyang （太阳） small intestine channel， three yang channels of the foot， the hand Shaoyin （少阴） heart channel， the foot Jueyin （厥阴） liver channel， and others， and combines scalp acupuncture with electro-acupuncture to enhance channel stimulation. Pattern and channel tropism differentiation is to differentiate the entered channel according to clinical symptoms and zang-fu patterns. The differentiation of deficiency-excess should be payed attention to， and the principle of “supplementing the deficiency， and draining the excess” should be followed. The supplementing and draining method should be used rationally by considering the differences in the supplementing and draining acupoints themselves， as well as the actual condition of the patients. Simultaneously， it is suggested to combine manipulation and stimulation amount and effect in clinical practice.

BACKGROUND: Sarcopenia is an age-related progressive skeletal muscle disorder involving the loss of muscle mass or strength and physiological function. Efficient and precise AI algorithms may play a significant role in the diagnosis of sarcopenia. In this study, we aimed to develop a machine learning model for sarcopenia diagnosis using clinical characteristics and laboratory indicators of aging cohorts. METHODS: We developed models of sarcopenia using the baseline data from the West China Health and Aging Trend (WCHAT) study. For external validation, we used the Xiamen Aging Trend (XMAT) cohort. We compared the support vector machine (SVM), random forest (RF), eXtreme Gradient Boosting (XGB), and Wide and Deep (W&D) models. The area under the receiver operating curve (AUC) and accuracy (ACC) were used to evaluate the diagnostic efficiency of the models. RESULTS: The WCHAT cohort, which included a total of 4057 participants for the training and testing datasets, and the XMAT cohort, which consisted of 553 participants for the external validation dataset, were enrolled in this study. Among the four models, W&D had the best performance (AUC = 0.916 ± 0.006, ACC = 0.882 ± 0.006), followed by SVM (AUC =0.907 ± 0.004, ACC = 0.877 ± 0.006), XGB (AUC = 0.877 ± 0.005, ACC = 0.868 ± 0.005), and RF (AUC = 0.843 ± 0.031, ACC = 0.836 ± 0.024) in the training dataset. Meanwhile, in the testing dataset, the diagnostic efficiency of the models from large to small was W&D (AUC = 0.881, ACC = 0.862), XGB (AUC = 0.858, ACC = 0.861), RF (AUC = 0.843, ACC = 0.836), and SVM (AUC = 0.829, ACC = 0.857). In the external validation dataset, the performance of W&D (AUC = 0.970, ACC = 0.911) was the best among the four models, followed by RF (AUC = 0.830, ACC = 0.769), SVM (AUC = 0.766, ACC = 0.738), and XGB (AUC = 0.722, ACC = 0.749). CONCLUSIONS: The W&D model not only had excellent diagnostic performance for sarcopenia but also showed good economic efficiency and timeliness. It could be widely used in primary health care institutions or developing areas with an aging population. TRIAL REGISTRATION Chictr.org, ChiCTR 1800018895.
Humans ; Aged ; Sarcopenia/diagnosis* ; Deep Learning ; Aging ; Algorithms ; Biomarkers

{L-End}Objective To analyze sound pressure level and spectrum characteristics of noise from various equipment in noise-related worksites in wooden furniture enterprises in Zhongshan City. {L-End}Methods A total of 107 wooden furniture enterprises with equipment sound pressure levels ≥85.0 dB(A) were selected as the research subjects using the judgment sampling method. Individual noise meters were used to detect the sound level and spectrum of equipment in noise-related worksites. Cluster analysis was used to analyze the noise spectrum characteristics of each noise equipment. {L-End}Results The incidence of sound pressure level exceeding the national standard of occupational exposure limits for noise in workplace among the research subjects was 60.4% (365/604). The equipment with the highest sound pressure level was the sliding table saw (rough shape cutting position) at 101.4 dB(A), while the lowest was the sanding machine (grinding position) at 85.0 dB(A). The clustering analysis results showed that the noise spectrum characteristics of nail guns, sliding table saw, edge banders, spray guns, and drilling machines were similar, with the highest sound pressure level of 4 000.0 Hz, mainly concentrating in the high-frequency. The noise spectrum characteristics of punching machines, sanding machine, lathes, and engraving machines were similar, with the highest sound pressure level ranging from 500.0 to 1 000.0 Hz, mainly concentrating in the mid-frequency. The noise spectrum characteristics of drilling machines, planers, hot press machines, and mortise and tenon machines were similar, with the highest sound pressure level ranging from 500.0 to 1 000.0 Hz, mainly concentrating in the mid- and high-frequency. The sound pressure level of the mixer reached its peak at 8 000.0 Hz, demonstrating a wide frequency domain characteristic of sound pressure level with the presence of low-, mid- and high-frequencies. {L-End}Conclusion The noise-exposed hazards of wooden furniture enterprises are relatively serious, and the spectral characteristics of the equipment with noise are distinct. It is recommended to implement targeted noise reduction measures and personal hearing protection based on the specific spectrum characteristics of equipment noise.

Objective: To investigate the clinical outcomes and radiological results of arthroscopic autologous scapular spine bone graft transplant to treat shoulder recurrent instability. Methods: Data of 27 patients diagnosed as shoulder recurrent instability with the bone defect of 10%-15% from July 2016 to August 2018 who were treated by arthroscopic autologous scapular spine bone graft transplant were retrospectively analyzed. There were 20 males and 7 females with an average age of 30.8 years old (range, 19-50). The bone loss of the glenoid was 10%-15%. The time between the first dislocation and the surgery was 24.1±15.8 months. The patients were treated with arthroscopic autologous scapular spine bone graft transplant. Postoperatively the affected shoulder was immobilized by the abduction brace for 6 weeks, after that the passive motion was applied. Strengthening exercise began at 10-12 weeks and sports was allowed after 6 months. Constant-Murley score and the Disabilities of Arm, Shoulder and Hand (DASH) score were used to evaluate the shoulder function, and visual analogue score (VAS) score was used to evaluate the degree of pain. Computed tomography scans were obtained one week post-operation and at the latest follow-up, from which the length, width, height and volume of the bone graft were measured and the absorption rate of the bone graft was calculated. The subjective satisfaction degree of patients at the latest follow-up was also recorded. Results: All 27 patients were followed up for 19.8 months (range, 13-39 months). No infection or neurovascular injury was identified. At the latest follow-up, the Constant-Murley score was 85.15±5.62 (range, 76-94), the DASH score 13.39±5.51 (range, 3.19-21.95) and the VAS score 1.29±0.45 (range, 1-2), thus all of those were improved significantly compared to those of pre-operation. At the latest follow-up, the anterior flexion was 153°±24°, lateral rotation by side 38°±21°, internal rotation 70°±21°, and abduction was 139°±18°. At the latest follow-up, the absorption rate of the bone graft was 46.1%±20.6% (range, 24.0%-71.7%). Among all the 27 patients, 19 patients considered the outcome as very good, and 6 patients considered as good, 2 patients fair. Conclusion Arthroscopic autologous scapular spine bone graft transplant could successfully treat shoulder recurrent instability with glenoid bone loss at 10%-15%. This technique could achieve satisfactory clinical results, improve glenohumeral stability, decrease the re-dislocation rate.

Pre-testing preparation is the basis and starting point of genetic testing.The process includes collection of clinical information,formulation of testing scheme,genetic counseling before testing,and completion of informed consent and testing authorization.To effectively identify genetic diseases in clinics can greatly improve the diagnostic rate of next generation sequencing (NGS),thereby reducing medical cost and improving clinical efficacy.The analysis of NGS results relies,to a large extent,on the understanding of genotype-phenotype correlations,therefore it is particularly important to collect and evaluate clinical phenotypes and describe them in uniform standard terms.Different types of genetic diseases or mutations may require specific testing techniques,which can yield twice the result with half the effort.Pre-testing genetic counseling can help patients and their families to understand the significance of relevant genetic testing,formulate individualized testing strategies,and lay a foundation for follow-up.

With high accuracy and precision,next generation sequencing (NGS) has provided a powerful tool for clinical testing of genetic diseases.To follow a standardized experimental procedure is the prerequisite to obtain stable,reliable,and effective NGS data for the assistance of diagnosis and/or screening of genetic diseases.At a conference of genetic testing industry held in Shanghai,May 2019,physicians engaged in the diagnosis and treatment of genetic diseases,experts engaged in clinical laboratory testing of genetic diseases and experts from third-party genetic testing companies have fully discussed the standardization of NGS procedures for the testing of genetic diseases.Experts from different backgrounds have provided opinions for the operation and implementation of NGS testing procedures including sample collection,reception,preservation,library construction,sequencing and data quality control.Based on the discussion,a consensus on the standardization of the testing procedures in NGS laboratories is developed with the aim to standardize NGS testing and accelerate implementation of NGS in clinical settings across China.

Bioinformatic analysis and variant classification are the key components of high-throughput sequencing-based genetic diagnostic approach.This consensus is part of the effort to develop a standardized process for next generation sequencing (NGS)-based test for germline mutations underlying Mendelian disorders in China.The flow-chart,common software,key parameters of bioinformatics pipeline for data processing,annotation,storage and variant classification are reviewed,which is aimed to help improving and maintaining a high-quality process and obtaining consistent outcomes for NGS-based molecular diagnosis.