BACKGROUND:Traditional methods of urinary tract reconstruction are limited by donor scarcity,high complication rates,and suboptimal functional recovery.Tissue engineering strategies offer new directions in this field.Since the urinary tract is mainly composed of muscle tissue,the key is to find suitable seed cells and efficiently induce them to differentiate into smooth muscle cells.Comparative studies on the efficacy of different smooth muscle cell induction regimens are still lacking. OBJECTIVE:To isolate,culture,and identify human urine-derived stem cells,and to compare the effects of two different induction protocols. METHODS:Human urine-derived stem cells were isolated from urine samples of 11 healthy adult volunteers by multiple centrifugations.Surface markers were identified by flow cytometry.The multi-directional differentiation potential of human urine-derived stem cells was verified through osteogenic and adipogenic differentiation.Differentiation was induced by transforming growth factor-β1 or transforming growth factor-β1 combined with platelet derived growth factor for 14 days.Immunofluorescence staining and western blot assay were employed to compare the expression differences of smooth muscle-specific proteins(α-SMA and SM22). RESULTS AND CONCLUSION:(1)Urine-derived stem cells were successfully isolated from the eight urine samples of healthy people.These cells exhibit a"rice grain"-like morphology and possess a robust proliferative capacity.(2)Urine-derived stem cells exhibited high expression of mesenchymal stem cell surface markers(CD73,CD90,and CD44)and extremely low expression of hematopoietic stem cell surface markers(CD34 and CD45).These cells did not express CD19,CD105,and HLA-DR.(3)After osteogenic and adipogenic differentiation,the formation of calcium nodules and lipid droplets was observed,with positive staining results from Alizarin Red S and Oil Red O staining.(4)After 14 days of smooth muscle induction culture,immunofluorescence staining revealed that the smooth muscle differentiation rate of urine-derived stem cells treated with a combination of transforming growth factor-β1 and platelet derived growth factor was significantly higher compared to those treated with transforming growth factor-β1 alone(P<0.005).(5)After 14 days of smooth muscle induction culture,western blot assay further demonstrated that the expression levels of α-SMA and SM22 in the transforming growth factor-β1/platelet derived growth factor group were significantly elevated compared to those in the transforming growth factor-β1 only group(P<0.005).These findings confirm that urine-derived stem cells can be non-invasively isolated using multiple rounds of centrifugation.Compared with transforming growth factor-β1 alone,the combination of transforming growth factor-β1 and platelet derived growth factor can improve the efficiency of inducing urine-derived stem cells to differentiate into smooth muscle cells.

Objective: To investigate the urban and rural differences in adverse outcomes of pulmonary tuberculosis (PTB) in patients with pulmonary tuberculosis-diabetes mellitus comorbidity (PTB-DM), so as to provide insights into improving the prevention and treatment measures for PTB-DM. Methods: Patients with PTB-DM who were admitted and discharged from 14 designated tuberculosis hospitals in Hangzhou City from 2018 to 2022 were selected. Basic information, and history of diagnosis and treatment were collected through hospital information systems. The adverse outcomes of PTB were defined as endpoints, and the proportions of adverse outcomes of PTB in urban and rural patients with PTB-DM were analyzed. Factors affecting the adverse outcomes of PTB were identified using a multivariable Cox proportional hazards regression model. Results: A total of 823 patients with PTB-DM were enrolled, including 354 (43.01%) urban and 469 (56.99%) rural patients. There were 112 (13.61%) patients with adverse outcomes of PTB. The proportions of adverse outcomes of PTB in urban and rural patients were 14.41% and 13.01%, respectively, with no statistically significant difference (P>0.05). Multivariable Cox proportional hazards regression analysis identified first diagnosed in county-level hospitals or above (HR=2.107, 95%CI: 1.181-3.758) and drug resistance (HR=3.303, 95%CI: 1.653-6.600) as the risk factors for adverse outcomes of PTB in urban patients with PTB-DM, while the treatment/observed management throughout the process (HR=0.470, 95%CI: 0.274-0.803) and fixed-dose combinations throughout the process (HR=0.331, 95%CI: 0.151-0.729) as the protective factors for adverse outcomes in rural patients with PTB-DM. Conclusions There are differences in influencing factors for adverse outcomes of PTB in urban and rural patients with PTB-DM. The adverse outcomes of PTB are associated with first diagnosed hospitals and drug resistance in urban patients, and are associated with the treatment/observed management and fixed-dose combinations throughout the process in rural patients.

ObjectiveTo improve the accuracy of discrete element method in simulating the processing of traditional Chinese medicine（TCM） powder system under low shear conditions. MethodsIn this study， extract powders of Tongsaimai tablets and Qige granules were used as the research objects， the angle of repose（AOR） and effective angle of internal friction of the two materials were determined by AOR test method and shear cell test method. Based on the Hertz-Mindlin with JKR V2 contact model and particle scaling theory， taking the particle-particle restitution coefficient（A）， particle-particle static friction coefficient（B）， particle-particle rolling friction coefficient（C）， particle-steel restitution coefficient（D）， particle-steel static friction coefficient（E）， particle-steel rolling friction coefficient（F） and Johnson-Kendall-Roberts（JKR） surface energy（G） as test factors， the simulated contact parameters of Tongsaimai tablets extract powder were first calibrated with a single reference value using AOR as the reference value， and then the simulated contact parameters of Tongsaimai tablets extract powder as well as Qige granules extract powder were co-calibrated with AOR and effective angle of internal friction as the joint reference value， respectively. Then， Plackett-Burman design was used to screen the critical contact parameters that have a significant effect on the simulated reference value， and the steepest ascent design was used to determine the optimal range of the critical contact parameters， finally， the regression model between the critical contact parameters and the simulated reference values was established through the design of the response surface test， and the critical contact parameters were calibrated based on the regression model and the desirability function approach. ResultsThe optimal combination of discrete elemental contact parameters A-G for Tongsaimai tablets extract powder under a single reference value was 0.100， 0.718， 0.616， 0.100， 0.400， 0.250 and 0.075 J·m^-2， which was validated to have relative errors of 0.10% and -8.64% for the simulated AOR and the simulated effective angle of internal friction， respectively. And the optimal combination of discrete elemental contact parameters A-G for Tongsaimai tablets extract powder at the joint reference values was 0.100， 0.682， 0.598， 0.100， 0.521， 0.294 and 0.075 J·m^-2， which was verified to have relative errors of 0.10% and -0.18% for the simulated AOR and the simulated effective angle of internal friction， respectively. The optimal combination of discrete elemental contact parameters A-G for Qige granules extract powder at the joint reference values was 0.150， 0.370， 0.330， 0.150， 0.500， 0.500 and 0.100 J·m^-2， which was verified to have relative errors of 2.70% and -1.30% for the simulated AOR and the simulated effective angle of internal friction， respectively. Compared with the single reference value method， the joint calibration method not only increased the number of the critical contact parameters for characterizing particle-device interactions， but also was more accurate and reliable. ConclusionCompared with the results of single reference value calibration， the results obtained by the method of joint calibration of discrete element simulation contact parameters with AOR and effective angle of internal friction as the reference values are more accurate， which can provide more accurate and reliable simulation physical property data for the simulation experiments of TCM extract powder under low shear process conditions.

Objective This study aims to predict the coronavirus disease 2019(COVID-19)epidemic in Xi'an based on SEAIQR model and Dropout-LSTM model,and to provide a scientific basis for evaluating the effectiveness of the"dynamic zero-COVID policy".Methods Considering a large number of asymptomatic infections,the changing parameters,and control procedures,we developed a time-dependent susceptible-exposed-asymptomatic-infected-quarantined-removed(SEAIQR)model with stage-specific interventions.Considering the time-series characteristics of COVID-19 data and the nonlinear relationship between them,we constructed a deep learning Dropout-LSTM model.The data of newly confirmed cases in Xi'an from December 9th,2021 to January 31st,2022 were used to fit the model,and the data from February 1st,2022 to February 7th,2022 were used to evaluate the model performance of forecasting.We then calculated the effective reproduction number(Rt)and analyzed the sensitivity of the different measurement scenarios.Results The peak of newly confirmed cases predicted by the SEAIQR model would appear on December 26th,2021,with 176 cases,and the"dynamic zero-COVID policy"may be achieved in January 24th,2022,with R2=0.849.The Dropout-LSTM model can reflect the time-series and nonlinear characteristics of the data,and the predicted newly confirmed cases were highly consistent with the actual situation,with R2=0.937.The MAE and RMSE of the Dropout-LSTM model were lower than those of the SEAIQR model,indicating that the predicted results were more ideal.At the beginning of the outbreak,R0 was 5.63.Since the implementation of comprehensive control,Rt has shown a gradual downward trend,dropping to below 1.0 on December 27th,2021.With the reduction of effective contact rate,the early implementation of control measures and the improvement of immunity threshold,the peak of newly confirmed cases will continue to decrease.Conclusion The proposed Dropout-LSTM model forecasts the epidemic well,which can provide a reference for decision-making of the"dynamic zero-COVID policy."

Hypertension is the most common chronic non-communicable disease and the primary risk factor for cardiovascular events.The traditional management methods for hypertension are often purely internal medicine and basically unrelated to percutaneous interventional techniques.In recent decades,with the development of imaging technology and interventional devices,the application of transcatheter interventional techniques in hypertension has become widespread.This article reviews the current status and prospect of transcatheter interventional techniques in the clinical diagnosis and treatment of hypertension.

Objective:To investigate the correlation between complement C3 and urine protein level and proteinuria remission status in patients with primary membranous nephropathy (PMN), and better guide individualized clinical treatment.Methods:It was a single-center retrospective study. The clinical data of PMN patients who underwent renal biopsy in the First Affiliated Hospital of Nanjing Medical University from January 2017 to June 2022 were collected. Patients with 24 h urinary protein ≥ 3.5 g were followed up after receiving standard treatment, and the last outpatient or inpatient review was used as the end point of follow-up. 24 h urine protein was collected to evaluate the remission status of proteinuria. Kaplan-Meier method was used to analyze the correlation between serum and renal complements and proteinuria remission. Cox regression analysis method was used to analyze the correlation between serum C3 level and renal tissue C3 deposition and proteinuria remission.Results:This study included 507 PMN patients with 312 (61.54%) males, aged 54 (43, 64) years old. Compared with 24 h urinary protein < 3.5 g group, proportion of males ( χ2=22.479, P<0.001), age ( Z=-2.521, P=0.012), systolic blood pressure ( Z=-4.148, P<0.001), diastolic blood pressure ( Z=-4.084, P<0.001), serum anti-phospholipase A2 receptor (PLA2R) antibody titer ( Z=-7.019, P<0.001), total cholesterol ( Z=-8.796, P<0.001), triglyceride ( Z=-6.158, P<0.001), low density lipoprotein cholesterol ( Z=-8.716, P<0.001), serum creatinine ( Z=-7.368, P<0.001), serum C3 ( Z=-3.663, P<0.001), serum C4 ( Z=-6.560, P<0.001), proportion of glucocorticoid use ( χ2=116.417, P<0.001) and proportion of immunosuppressant use ( χ2=53.839, P<0.001) were all higher, while serum albumin ( Z=12.518, P<0.001), estimated glomerular filtration rate ( Z=6.345, P<0.001) and serum IgG ( Z=7.321, P<0.001) were all lower in 24 h urinary protein ≥3.5 g group. There were 268 patients included in the follow-up cohort with baseline 24 h urinary protein of 7.15 (5.14, 10.24) g, serum anti-PLA2R antibody titer of 61.44 (14.35, 193.24) RU/ml, serum C3 of 1.005 (0.864, 1.150) g/L, and serum C4 of 0.260 (0.214, 0.317) g/L. Kaplan-Meier survival curve showed that the incomplete remission rate of proteinuria in serum C3 > 1.005 g/L group was lower than that in serum C3 ≤ 1.005 g/L group (log-rank χ2=4.757, P=0.029). There was no significant difference in the incomplete remission rate of proteinuria between serum C4 ≤ 0.260 g/L group and serum C4 > 0.260 g/L group (log-rank χ2=3.543, P=0.060). Renal C1q (log-rank χ2=0.167, P=0.683) and C4 (log-rank χ2=1.927, P=0.165) deposition had no significant effects on proteinuria remission in PMN patients. The incomplete remission rate of proteinuria in patients with renal C3 deposition was higher than that in patients without renal C3 deposition (log-rank χ2=7.018, P=0.008). Univariate Cox regression analysis showed that serum C3 level and C3 deposition in renal tissues were influencing factors of incomplete remission of proteinuria (both P<0.05), while adjusting for gender, age, mean arterial pressure, serum anti-PLA2R antibody, serum albumin and 24 h urinary protein, serum C3 ≤ 1.005 g/L ( HR=1.374, 95% CI 1.021-1.849, P=0.036), C3 deposition in renal tissues ( HR=1.949, 95% CI 1.098-3.460, P=0.023), and serum C3 ≤ 1.005 g/L combined with C3 deposition in renal tissues ( HR=1.472, 95% CI 1.093-1.983, P=0.011) were independent influencing factors of incomplete remission of proteinuria. Conclusions:The serum C3 level and C3 deposition in renal tissues are closely related to urinary protein level and proteinuria remission status in PMN patients. The patients with higher urinary protein have higher serum C3. For patients with massive proteinuria, serum C3 ≤ 1.005 g/L, C3 deposition in renal tissues, serum C3 ≤ 1.005 g/L combined with C3 deposition in renal tissues are independent risk factors of incomplete remission of proteinuria.

Objective:To evaluate the real-world safety of the domestic rotavirus attenuated live vaccine in China.Methods:Studies on the incidence of adverse event following immunization (AEFI) published from January 1, 2020 to July 31, 2023 were retrieved from National Knowledge Infrastructure (CNKI), CQVIP, Wanfang Database, PubMed, Medline, and Embase. Surveillance data about AEFI reports related to the domestic rotavirus vaccine rotavirus were collected. A meta-analysis on the safety of the rotavirus vaccine after vaccination was conducted using R software, and subgroup analyses were conducted on the incidence of AEFI in different regions and time periods.Results:A total of 36 articles were included involving 25.332 million doses of vaccine. The incidence of AEFI associated with the domestic rotavirus vaccine was 19/100 000 doses [95%CI: 15/100 000-24/100 000 doses]; the incidence was 26/100 000 doses [95%CI: 17/100 000-39/100 000 doses] in the northern regions and 16/100 000 doses [95%CI: 11/100 000-23/100 000 doses] in the southern regions; it was 24/100 000 doses [95%CI: 12/100 000-45/100 000 doses] before 2017 and 27/100 000 doses [95%CI: 18/100 000-39/100 000 doses] after 2017.Conclusions:The incidence of AEFI related to the domestic rotavirus vaccine is within the expected range, and the safety of the vaccine is good based on the real-world data.

Objectives:To investigate the value of metagenomic next-generation sequencing (mNGS) in the diagnosis of Pneumocystis jirovecii pneumonia (PJP) in patients undergoing allogeneic hematopoietic stem cell transplantation (allo-HSCT) .Methods:The data of 98 patients with suspected pulmonary infection after allo-HSCT who underwent pathogen detection from bronchoalveolar lavage fluid between June 2016 and August 2023 at Nanfang Hospital were analyzed. The diagnostic performance of mNGS, conventional methods, and real-time quantitative polymerase chain reaction (qPCR) for PJP were compared.Results:A total of 12 patients were diagnosed with PJP, including 11 with a proven diagnosis and 1 with a probable diagnosis. Among the patients with a proven diagnosis, 1 was positive by both conventional methods and qPCR, and 10 were positive by qPCR only. Pneumocystis jirovecii was detected by mNGS in all 12 patients. The diagnostic sensitivity of mNGS for PJP was 100%, which was greater than that of conventional methods (8.3%, P=0.001) and similar to that of qPCR (91.6%, P=1.000) . A total of 75% of the patients developed mixed pulmonary infections, and cytomegalovirus and Epstein-Barr virus were the most common pathogens. Mixed infection was detected in eight patients by mNGS and in five patients by qPCR, but not by conventional methods ( P=0.008) . Conclusions:mNGS had good sensitivity for diagnosing PJP after allo-HSCT and was advantageous for detecting mixed infectious pathogens; therefore, mNGS might be an effective supplement to regular detection methods and qPCR.

Epstein-Barr virus (EBV) associated post-transplant lymphoproliferative disorders (PTLD) are one of the most severe complications after hematopoietic stem cell transplantation (HSCT). This study includes 31 cases of aplastic anemia (AA) patients who developed PTLD after haploidentical transplantation, summarizing their clinical characteristics and categorizing them into either rituximab monotherapy group or combination therapy group based on whether their condition improved by 1 log after a single dose of rituximab. The incidence of PTLD after HSCT in children with AA was 10.16%, and the incidence of PTLD in patients with age >10 years was significantly increased ( χ2=11.336, P=0.010). Of the 31 patients, 27 were clinically diagnosed and 4 were pathologically confirmed. Finally, 15 patients were classified into the rituximab treatment group and 15 patients into the combination treatment groups. Finally three patients died, and the 2-year overall survival rate was (89.7±5.6) %. Standard pre-treatment protocols and EBV reactivation are risk factors affecting the prognosis of PTLD. There was no statistically significant difference in the impact of the two treatment schemes on prognosis.

Objective To develop a GPU-based Monte Carlo dose calculation module for helical tomotherapy(TOMO),and integrate it into the commercial software ArcherQA to achieve fast and accurate dose verification in clinic.Methods The TOMO treatment head was modeled using TOPAS to obtain phase space files,and a fast weight tuning algorithm was used to simulate particle transport in multi-leaf collimator for improving computational efficiency,and finally,GPU-based Monte Carlo algorithms in ArcherQA were used to simulate particle transport in patients.To verify the model accuracy,the ArcherQA calculated results in water tank were compared with measured data for different open fields.In addition,multiple comparisons among ArcherQA results,TPS results and ArcCHECK results were conducted on 15 clinical cases(5 cases in the head and neck,5 cases in the chest and abdomen,and 5 cases in the whole body).Results In the water tank tests for 40 cm×5.0 cm,40 cm×2.5 cm and 40 cm× 1.0 cm radiation fields,the average global relative errors of the percentage depth dose,transverse dose distribution,and longitudinal dose distribution calculated by ArcherQA with the corresponding measured values were 0.72％,0.66％,and 0.54％,respectively.Over 98％of the voxels had a global relative error of less than 1％.As for 15 clinical cases,in 2％/2 mm criteria,the mean Gamma passing rate was 98.1％between ArcherQA and TPS,99.1％between TPS and ArcCHECK,and 99.4％between ArcherQA and ArcCHECK.The uncertainty of the simulation maintained less than 1％,and the average time taken for calculation based on patient CT vs ArcCHECK phantom was 87 s vs 64 s.Conclusion ArcherQA can be used for independent dose validation for TOMO plans for it can provide fast and accurate dose calculations.