OBJECTIVE: To observe the effect of heat-sensitive moxibustion at "Feishu" (BL13) on immunoinflammatory response in rats with allergic rhinitis (AR) based on phosphatidylinositol 3-kinase (PI3K)/protein kinase B (AKT) signaling pathway, so as to explore its underlying mechanism. METHODS: Thirty-two male SD rats were randomly divided into a blank group (6 rats) and a modeling group (26 rats). In the modeling group, AR model was prepared using systemic and local attack sensitization method with ovalbumin. The successfully-modeled rats were randomized into a model group (6 rats), a medication group (6 rats) and a moxibustion group (14 rats). In the moxibustion group, the suspending moxibustion was operated at bilateral "Feishu" (BL13), 40 min each time, once daily, for 21 consecutive days; during which, the temperature of the body and tail was recorded. During intervention, if the temperature of the body and tail increased by >1 ℃, the heat-sensitive reaction at the point was determined in the rats of the moxibustion group, and these rats were collected in a heat-sensitive moxibustion group (8 rats involved and 6 rats of them were randomly collected to ensure the sample-size consistency); and those without heat-sensitive moxibustion reaction were assigned to a traditional moxibustion group (6 rats). In the medication group, fluticasone propionate nasal spray was applied, 8 μL on each side, once daily and for 21 days. The behavioral score for AR symptoms after modeling and intervention, and the content of serum immunoglobulin E (IgE) after modeling were observed. After intervention, the histological morphology of the nasal mucosa was observed using HE staining, the positive expression of thymic stromal lymphopoietin (TSLP) in the nasal mucosa was detected using immunohistochemistry, the levels of IgE, interleukin (IL)-4, IL-5, IL-13 and interferon-γ (IFN-γ) were detected by ELISA, and the protein expression of the member 4 of tumor necrosis factor receptor superfamily (OX40), phosphorylated protein kinase B (p-AKT), phosphorylated phosphatidylinositol 3-kinase (p-PI3K) in nasal mucosa was detected by Western blotting. RESULTS: After modeling, the behavioral score of AR symptoms and serum IgE level in the modeling group were higher than those of the blank group (P<0.01), suggesting the success of AR modeling. After intervention, compared with the blank group, the behavioral score of AR symptoms was increased (P<0.01)；the nasal mucosa structure was disordered, the inflammatory infiltration was severe; the positive expression of TSLP in the nasal mucosa increased (P<0.01), the levels of serum IgE, IL-4, IL-5, and IL-13 elevated (P<0.01), and the level of IFN-γ decreased (P<0.01); and the protein expression of OX40, p-AKT, and p-PI3K in the nasal mucosa increased (P<0.05) in the model group. Compared with the model group, the behavioral score of AR symptoms was reduced (P<0.01); the nasal mucosa structure, inflammatory infiltration, and vascular dilation were ameliorated to varying degrees; the positive expression of TSLP in the nasal mucosa decreased (P<0.01); the content of serum IgE, IL-4, IL-5, and IL-13 decreased (P<0.05), and that of IFN-γ increased (P<0.05) in the medication, traditional moxibustion, and heat-sensitive moxibustion groups. Compared with the model group, the protein expression of p-AKT was reduced in the medication and traditional moxibustion groups (P<0.05), the protein expression of OX40, p-AKT, and p-PI3K in the nasal mucosa decreased in the heat-sensitive moxibustion group (P<0.05). When compared with the medication group, the positive expression of TSLP in the nasal mucosa was reduced (P<0.05) in the heat-sensitive moxibustion group. In comparison with the traditional moxibustion group, the content of serum IL-13 was reduced and the content of IFN-γ elevated in the heat-sensitive moxibustion and the medication groups (P<0.05), the protein expression of p-PI3K reduced in the medication group (P<0.05), and the positive expression of TSLP and the protein expression of OX40 and p-PI3K in the nasal mucosa were reduced in the heat-sensitive moxibustion group (P<0.05). CONCLUSION Heat-sensitive moxibustion at "Feishu" (BL13) can alleviate the symptoms of AR rats, ameliorate the inflammatory infiltration and telangiectasia of nasal mucosa, and inhibit immunoinflammatory response, which may be obtained by regulating PI3K/AKT signal pathway.
Animals ; Moxibustion ; Male ; Rats ; Signal Transduction ; Rats, Sprague-Dawley ; Rhinitis, Allergic/genetics* ; Proto-Oncogene Proteins c-akt/immunology* ; Acupuncture Points ; Humans ; Phosphatidylinositol 3-Kinases/immunology* ; Phosphatidylinositol 3-Kinase/immunology*

OBJECTIVE: To investigate the analgesic effect of locally injecting a "cocktail" analgesia containing a high-dose compound betamethasone during revision hip arthroplasty, and also to study the usage of opioid drugs. METHODS: A retrospective analysis was conducted on the clinical data of 180 patients who underwent revision hip arthroplasty due to aseptic loosening of the hip prosthesis between January 2015 and December 2021. Among them, 95 patients received intraoperative injection of "cocktail" analgesia containing high-dose compound betamethasone (group A), and 85 patients received intraoperative injection of traditional "cocktail" analgesia (group B). There was no significant difference in baseline data such as gender, age, body mass index, presence or absence of diabetes mellitus between the two groups ( P>0.05). The hospital stay, use of opioid drugs within 72 hours, and the incidence of adverse reactions within 72 hours after operation [including nausea and vomiting, insomnia, deep venous thrombosis (DVT), infection, etc.] were recorded and compared between the two groups. The pain relief of patients was evaluated using the static and dynamic visual analogue scale (VAS) scores at 12, 24, 48, and 72 hours after operation. The incidence of complications (including prosthesis re-loosening, hip joint dislocation, hip joint stiffness, limping, chronic pain, etc.) at 2 years after operation was recorded, and the Harris Hip Score (HHS) was used to evaluate the function at 2 years after operation. RESULTS: In group A, the utilization rate of opioid drugs within 72 hours after operation was significantly lower than that in group B ( P<0.05). However, there was no significant difference between the two groups in terms of hospital stay, as well as the incidence of adverse reactions such as nausea and vomiting, insomnia, DVT, and infection within 72 hours after operation ( P>0.05). The VAS scores of both groups decreased with time, and the differences between different time points were significant ( P<0.05). The static and dynamic VAS scores of group A were significantly lower than those of group B at 12, 24, and 48 hours after operation ( P<0.05), but there was no significant difference in static and dynamic VAS scores between the two groups at 72 hours after operation ( P>0.05). All patients in both groups were followed up 2-8 years, with an average of 5.73 years. At 2 years after operation, no significant difference was found between the two groups in the incidence of complications and HHS score ( P>0.05). CONCLUSION "Cocktail" analgesia containing a high-dose compound betamethasone for early analgesia after revision hip arthroplasty can effectively reduce postoperative pain and the use of opioid drugs, but will not increase the incidence of infection and DVT after operation.
Humans ; Arthroplasty, Replacement, Hip/adverse effects* ; Betamethasone/therapeutic use* ; Retrospective Studies ; Male ; Female ; Analgesics, Opioid/administration & dosage* ; Pain, Postoperative/prevention & control* ; Middle Aged ; Reoperation ; Aged ; Analgesia/methods* ; Adult ; Pain Measurement ; Pain Management/methods* ; Prosthesis Failure ; Hip Prosthesis

OBJECTIVE: To analyze the effectiveness of single three-dimensional (3D)-printed microporous titanium prostheses and flap combined prostheses implantation in the treatment of large segmental infectious bone defects in limbs. METHODS: A retrospective analysis was conducted on the clinical data of 76 patients with large segmental infectious bone defects in limbs who were treated between January 2019 and February 2024 and met the selection criteria. Among them, 51 were male and 25 were female, with an age of (47.7±9.4) years. Of the 76 patients, 51 had no soft tissue defects (single prostheses group), while 25 had associated soft tissue defects (flap combined group). The single prostheses group included 28 cases of tibial bone defects, 11 cases of femoral defects, 5 cases of humeral defects, 4 cases of radial bone defects, and 3 cases of metacarpal, or carpal bone defects, with bone defect length ranging from 3.5 to 28.0 cm. The flap combined group included 3 cases of extensive dorsum of foot soft tissue defects combined with large segmental metatarsal bone defects, 19 cases of lower leg soft tissue defects combined with large segmental tibial bone defects, and 3 cases of hand and forearm soft tissue defects combined with metacarpal, carpal, or radial bone defects, with bone defect length ranging from 3.8 to 32.0 cm and soft tissue defect areas ranging from 8 cm×5 cm to 33 cm×10 cm. In the first stage, vancomycin-loaded bone cement was used to control infection, and flap repair was performed in the flap combined group. In the second stage, 3D-printed microporous titanium prostheses were implanted. Postoperative assessments were performed to evaluate infection control and bone integration, and pain release was evaluated using the visual analogue scale (VAS) score. RESULTS: All patients were followed up postoperatively, with an average follow-up time of (35.2±13.4) months. In the 61 lower limb injury patients, the time of standing, walk with crutches, and fully bear weight were (2.2±0.6), (3.9±1.1), and (5.4±1.1) months, respectively. The VAS score at 1 year postoperatively was significantly lower than preoperative one ( t=-10.678, P<0.001). At 1 year postoperatively, 69 patients (90.8%) showed no complication such as infection, fracture, prosthesis displacement, or breakage, and X-ray films indicated good integration at the prosthesis-bone interface. According to the Paley scoring system for the healing of infectious bone defects, the results were excellent in 37 cases, good in 29 cases, fair in 3 cases, and poor in 7 cases. In the single prostheses group, during the follow-up, there was 1 case each of femoral prostheses fracture, femoral infection, and tibial infection, with a treatment success rate of 94.1% (48/51). In lower limb injury patients, the time of fully bear weight was (5.0±1.0) months. In the flap combined group, during the follow-up, 1 case of tibial fixation prostheses screw fracture occurred, along with 2 cases of recurrent foot infection in diabetic patients and 1 case of tibial infection. The treatment success rate was 84.0% (21/25). The time of fully bear weight in lower limb injury patients was (5.8±1.2) months. The overall infection eradication rate for all patients was 93.4% (71/76). CONCLUSION The use of 3D-printed microporous titanium prostheses, either alone or in combination with flaps, for the treatment of large segmental infectious bone defects in the limbs results in good effectiveness with a low incidence of complications. It is a feasible strategy for the reconstruction of infectious bone defects.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Titanium ; Retrospective Studies ; Surgical Flaps ; Adult ; Prosthesis Implantation/methods* ; Plastic Surgery Procedures/methods* ; Treatment Outcome ; Prostheses and Implants ; Bone Diseases, Infectious/surgery* ; Extremities/surgery* ; Prosthesis Design

After the production of the gradient coil of the magnetic resonance imaging system, electromagnetic field testing is required to verify whether the assembly accuracy meets the electromagnetic field requirements. Since the passive magnetic field B _z satisfies the Laplace ^,s equation and is a harmonic function, and according to the extreme value principle of harmonic function, the maximum or minimum values of B _z can only appear on the boundaries, so the observation points of the magnetic field are generally selected on the surface of the spherical imaging area. For superconducting magnets used for human body magnetic resonance imaging, a spherical area with a center diameter of 40~50 cm is generally selected as the shimming target area. Only the field value of the target area needs to be measured, and the spherical harmonic coefficients obtained after data processing are used to determine the magnetic field performance of the gradient coil. There are many testing principles and methods for electromagnetic fields, so there is no unified way and method in the field of commercial applications. This article is based on the Gauss-Legendre numerical integration, measures and analyzes the magnetic field performance of gradient coils by building a data acquisition system, and this article applies numerical analysis methods to calculate the spherical harmonic coefficients of the magnetic field using discrete test data, providing a feasible method for the production and testing of gradient coils.
Magnetic Resonance Imaging/methods* ; Magnetic Fields ; Electromagnetic Fields ; Equipment Design

The casting and curing of gradient coils in the production process is a relatively complex process. The chemical process similar to the black box model requires confirmation of the impact of each step of input on the output results, while the curing temperature and molding method affect the roundness and deformation of the gradient coils. The analysis of the curing temperature and demolding method of gradient coils has important practical significance for the formation and micro deformation of gradient coils. This article uses ANSYS finite element simulation software to analyze the thermal structural coupling and the specific performance of actual products. It has been found that the product quality is more stable under the heat conduction mode, and the roundness of the mold is better when placed vertically and waiting for temperature cooling before being demolding than when placed horizontally.

Lirispirolides A-L (1-12), twelve novel sesquiterpene-monoterpene heterodimers featuring distinctive carbon skeletons, were isolated from the branches and leaves of Chinese tulip tree [Liriodendron chinense (L. chinense)], a rare medicinal and ornamental plant endemic to China. The structural elucidation was accomplished through comprehensive spectroscopic analyses, quantum-chemical calculations, and X-ray crystallography. These heterodimers exhibit a characteristic 2-oxaspiro[4.5]decan-1-one structural motif, biosynthetically formed through intermolecular [4 + 2]-cycloaddition between a germacrane-type sesquiterpene and an ocimene-type monoterpene. The majority of the isolated compounds demonstrated significant anti-neuroinflammatory effects in lipopolysaccharide (LPS)-induced BV-2 microglial cells by reducing the production of pro-inflammatory mediators, specifically tumor necrosis factor-α (TNF-α) and nitric oxide (NO). Further investigation revealed that the lirispirolides' inhibition of NO release correlated with decreased messenger ribonucleic acid (mRNA) expression of inducible NO synthase (iNOS).
Sesquiterpenes/isolation & purification* ; Anti-Inflammatory Agents/isolation & purification* ; Animals ; Mice ; Tumor Necrosis Factor-alpha/genetics* ; Nitric Oxide/immunology* ; Microglia/immunology* ; Molecular Structure ; Liriodendron/chemistry* ; Monoterpenes/isolation & purification* ; Plants, Medicinal/chemistry* ; Cell Line ; Lipopolysaccharides ; Nitric Oxide Synthase Type II/immunology* ; Plant Extracts/pharmacology* ; China

To develop a milestone-based evaluation system for the core "knowledge and skills" competency of neurology residents that is tailored to China's medical context, so as to provide precise guidance for their training and assessment.

Objective:To establish an animal model of trans-sutural distraction osteogenesis in SD rats.Methods:A self-designed V-shaped distraction device(distractor)was fabricated with the traction force(N)of 0,1.3,2.2,3.0,4.3 and 5.0 corresponding to the distraction length(mm)of 5,4,3,2,1 and 0 respectively,meeting the trans-sutural distraction osteogenesis requirements in skull of 5-week-old SD rats.The distractor was plased into the sagittal suture of 12 SD rats.Continuous sampling was conducted 1,3,5 and 7 days respectively(n=3)after operation.The tissue changes in the trans-sutural distraction area were observed by HE and Masson's trichrome staining.Inflammation levels were determined using Arg-1 immunofluorescence staining.The early angiogenesis was clarified through co-staining with CD31 and EMCN.Results:A stable trans-sutural distraction osteogenesis model was estab-lished,5 mm distraction osteogenesis width was observed completely within 7 days of distraction.Significant new bone formation was observed at 7 days after operation.Arg-1 expression increased and was concentrated at the bone margins,overlapping with the areas of new bone formation.EMCN expression gradually decreased,and by day 7 CD31 was predominant,indicating the basic maturation of blood vessels.Conclusion:This study successfully constructed a stable and effective trans-sutural distraction osteogenesis animal model,and provides an experimental basis for the investigation of its early continuous histological changes.

Objective:To explore the differences between the deep learning-based image reconstruction (DLIR) and the adaptive statistical iterative reconstruction V (ASiR-V) algorithms in the radiation dose and image quality of head and neck CT angiography (CTA).Methods:The data of 80 patients undergoing head and neck CTA due to vascular diseases in the head and neck were prospectively collected. These patients were randomly divided into groups A and B based on their examination sequence. The CTA images of group A were reconstructed based on ASiR-V 50%, with a tube voltage of 120 kV and a noise index of 11.0. In contrast, those of group B were reconstructed based on ASiR-V 50% (for group B1) and DLIR-H (for group B2), with a tube voltage of 80 kV and a noise index of 9.0. Then, the radiation doses and image quality of both groups were compared using the independent-sample t-test. The radiation doses, and both subjective and objective image quality of the two imaging method were compared through the Kruskal-Wallis test and the Wilcoxon rank-sum test. The independent- or paired-sample t-test was employed to measure inter-group vascular enhanced CT values, as well as signals and noise from regions of interest (ROIs), with signal-to-noise ratios (SNRs) and contrast-to-noise ratios (CNRs) calculated. Results:The effective doses of groups A and B were (0.77±0.08) and (0.45±0.05) mSv, respectively, with a statistically significant difference ( t = 21.96, P < 0.001). The vascular enhanced CT values, SDs, SNRs, and CNRs in the arch of the aorta, the initial and bifurcation parts of the common carotid artery, and the M1 segment of the middle cerebral artery showed statistically significant differences among groups A, B1, and B2 ( F = 67.69, 68.50, 50.52, 74.10, 63.10, 91.22, 69.16, P < 0.001). Additionally, statistically significant differences were observed in the subjective scores of image quality among groups A, B1, and B2 ( Z = 71.06, P < 0.05). Conclusions:The DLIR algorithm can further reduce the radiation dose in head and neck CTA examination while significantly reducing image noise and ensuring image quality, thus demonstrating high clinical application value.

Objective To study the population genetic structure and phylogenetic relationships by combining Y-STR haplotype genetic information from the Han population in Dalian with 32 domestic and foreign groups.Methods Blood samples of 958 Han male volunteers from Dalian were collected.Genetic typing of 42 genetic loci was completed using Y-STR fluorescent reagent kits and capillary electrophoresis.Related forensic parameters were calculated.Nei's standard genetic distances among 33 populations based on 17 Y-STR loci were computed,in order to create a principal coordinate analysis as well as construct a phylogenetic tree.Results The analysis of genetic polymorphisms at 42 Y-STR loci revealed 30 unconventional alleles at 10 loci.Genetic analysis of the population based on 17 Y-STR loci confirmed that Dalian's Han population had the closest genetic distance to the Anshan's Han population,followed by populations from Henan,Heilongjiang,Jilin,Shandong,and Chongqing.Furthermore,the genetic distances between the Han population in Dalian and the Qiang population in Beichuan or the Miao population in Guizhou were relatively closer than that to the Manchu population living in Liaoning.Conclusion The genetic distance between the Han population in Dalian and other groups is not entirely proportional to ethnicities and geographical proximity.Both population migration and ethnic assimilation or isolation may have influence on it.