C-Reactive protein(CRP)is an important acute-phase response protein,which is widely used in the assessment of inflammation and cardiovascular disease risk,and acts as a pathogenic factor directly involved in the disease process of certain conditions.Therefore,developing immunosuppressants targeting CRP or investigating its pathogenic mechanisms is of significant importance.Most B-cell epitopes are conformational epitopes,and studying conformational epitopes is typically challenging.To date,no methods have been reported for mapping the conformational epitopes of CRP in solution.In this study,a rapid strategy was developed for studying conformational epitopes by combining hydrogen/deuterium exchange mass spectrometry(HDX-MS)with multiparametric prediction of B-cell epitopes and protein secondary structure analysis.This approach was successfully applied to the binding sites and allosteric targets of the 115 kDa full pentameric CRP and the clinically used monoclonal antibody(mAb)5A8.The results showed that the amino acid residues 84-103,138-146,and 165-173 together form the potential conformational epitopes for mAb 5A8 on CRP,while the amino acid residues 21-32 and 175-178 were identified as potential allosteric targets.The discovery of the mAb 5A8 binding sites and allosteric targets was crucial for improving clinical diagnostic capabilities.Experimental results demonstrated that this workflow allowed rapid conformational epitope mapping of CRP under near-physiological conditions,with advantages such as high speed,high sensitivity,and high throughput.

Detection of poor-water-soluble substances typically requires an organic solvent containing solution,and therefore,the biosensors that can operate in such conditions are highly promising for practical applications.However,most existing biosensors have been developed in aqueous solution and it is hard to work effectively in organic solvent systems.In this work,we uncovered that the G-quadruplex(G4)/hemin DNAzyme(G4HD)could be strongly reactivated by NH4 in organic solvents at concentration up to 30％,and the activity was significantly higher than that in aqueous solutions containing K+.Based on this discovery,a biosensing system was developed for small molecule in 40％methanol by coupling G4HD with our previously identified RNA-cleaving DNAzyme(E3).This system comprised an ATP-activated aptazyme that was made of E3 and a G4HD that was activated by the cleavage product of the aptazyme.By using a manmade pipette tip filter to separate the reaction products,the subsequent colorimetric reaction of the G4HD could be triggered.This biosensing system enabled the visualization of target molecules in organic cosolvents without any other instruments.The activable DNAzyme-cascade sensing system had potential in point-of-care detection of poor-water-soluble pollutants,thereby enhancing the practical values of functional nucleic acid-based biosensors in real-world detection conditions.

As a serine protease,thrombin can convert soluble fibrinogen into insoluble fibrin and plays a pivotal role in the coagulation cascade.Therefore,the accurate quantitative assay of thrombin levels is of great value in the evaluation of coagulation function,clinical screening and prognostic monitoring of coagulation-related diseases,and screening of drugs for targeted therapy.Existing methods for thrombin detection can be divided into two categories,e.g.,the assay of concentration levels using nucleic acid aptamers as the affinity elements and the assay of activity levels based on the hydrolytic cleavage of substrate peptides.In recent years,electrochemical biosensors have attracted much attention in thrombin detection due to high sensitivity,high selectivity,simple instrument,fast response,and good portability.In this review,the latest research progress in methods for electrochemical detection of thrombin was summarized,focusing on the detection principles and the applied signal amplification strategies of related electrochemical biosensors.In addition,the challenges with respect to the practical use of electrochemical thrombin biosensors and the prospects were discussed.

Objective To analyze the characteristics of methadone-related poisoning cases and provide a reference for forensic identification.Methods A total of 71 cases of methadone-related poisoning re-ported from 1998 to 2023 in China and 26 cases of methadone-related deaths reported from 2013 to 2018 in Italy were retrieved from databases including PubMed,Wanfang and CNKI.The general infor-mation,forensic pathological and toxicological characteristics were analyzed.Results Among the 71 methadone-related poisoning cases in China,there were 54 cases(76.06%)of poisoning without death and 17 cases(23.94%)of death from poisoning.There were 54 male cases(76.06%),and 51 cases(71.83%)aged 19 to 39 years old.There were 35 cases(49.30%)of poisoning caused by methadone alone,and 32 cases(45.07%)were poisoning caused by methadone combined with other substances or drugs including heroin and benzodiazepines.Most of the poisoned showed coma,respiratory depres-sion and miosis.Signs of asphyxia were often found by autopsy.The mass concentration of methadone detected in the blood of 6 deceased ranged from 0.112 to 3.000 mg/L.Among the 26 methadone-related deaths in Italy,22 cases were male(84.62%).There were 6 cases(23.08%)caused by methadone alone,and 20 cases(76.92%)died from methadone combined with other substances or drugs.The mass concentration of methadone in blood ranged from 0.181 to 4.059 mg/L.Conclusion The propor-tions of poisoning cases caused by methadone alone and methadone combined with other substances or drugs are comparable in China.The majority of deceased caused by methadone poisoning shows typi-cal triad of coma,respiratory depression and miosis,which helps forensic experts determine the cause of death related to methadone.Additionally,it is necessary to increase the routine testing of the con-centration of methadone and its combined substances or drugs in deceased,and collect data for the in-terpretation of the results of related cases.

Objective To compare the application effects of plankton multiplex polymerase chain reac-tion-capillary electrophoresis(PCR-CE),SYBR Green Ⅰ real-time quantitative PCR(qPCR)and microwave digestion-vacuum filtration-automated scanning electron microscopy(MD-VF-Auto SEM)in the diagnosis of drowning.Methods Lung,liver and kidney tissues from 212 drowned corpses and 30 non-drowned corpses were examined respectively by the three drowning-related plankton testing methods,and the detection rates of plankton in each tissue by three methods were compared.Results In drowned corpses,the total detection rates of PCR-CE,qPCR,and MD-VF-Auto SEM were 93.9%,96.2%,and 95.3%,respectively,with no statistically significant difference(P>0.05).The detection rate of lung tissue by MD-VF-Auto SEM(100%)was higher than those of PCR-CE and qPCR(P<0.05),and there was no significant difference in the detection rates of the three methods in liver or kidney tissues(P>0.05).In non-drowning corpses,a small number of diatoms(less than 10 cells/10 g)were detected by MD-VF-Auto SEM method,only in liver and kidney tissues,while the other two methods yielded negative results for all tissues.Conclusion All three methods have good efficacy in the examination of drowned corpses.The MD-VF-Auto SEM method directly observes diatom morpho-logical characteristics through scanning electron microscopy,and the qualitative and quantitative analy-ses are intuitive and accurate.It has great advantages in the examination of difficult degradation samples.The PCR-CE method and qPCR method have a low sample demand(0.5 g),are easy to operate and have short detection time(4-7 h).They are easy to be applied in the grassroots depart-ments and are suitable for the rapid determination of drowned corpses in routin cases.The combina-tion of the two DNA methods with the MD-VF-Auto SEM method can increase the detection rate of plankton,ensuring the reliability of examination results.This combined use is of significant importance in the application of drowning diagnosis.

Laparoscopic subtotal cholecystectomy (LSC) has been a safe and viable alternative to conversion to laparotomy in cases of severe cholecystitis. The objective of this study is to determine the utility of intraoperative choledochoscopy in LSC for the exploration of the gallbladder, cyst duct, and subsequent stone clearance of the cystic duct in cases of severe cholecystitis. A total of 72 patients diagnosed with severe cholecystitis received choledochoscopy-assisted laparoscopic subtotal cholecystectomy (CALSC). A choledochoscopy was performed to explore the gallbladder cavity and/or cystic duct, and to extract stones using a range of techniques. The clinical records, including the operative records and outcomes, were subjected to analysis. No LSC was converted to open surgery, and no bile duct or vascular injuries were sustained. All stones within the cystic duct were removed by a combination of techniques, including high-frequency needle knife electrotomy, basket, and electrohydraulic lithotripsy. A follow-up examination revealed the absence of residual bile duct stones, with the exception of one common bile duct stone, which was extracted via endoscopic retrograde cholangiopancreatography. In certain special cases, CALSC may prove to be an efficacious treatment for the management of severe cholecystitis. This technique allows for optimal comprehension of the situation within the gallbladder cavity and cystic duct, facilitating the removal of stones from the cystic duct and reducing the residue of the non-functional gallbladder remnant.

Poloxamer， as a non-ionic surfactant， exhibits a unique triblock [polyethylene oxide-poly （propylene oxide）-polyethylene oxide] structure， which endows it with broad application potential in various fields， including solid dispersion technology， nanotechnology， gel technology， biologics， gene engineering and 3D printing. As a carrier， it enhances the solubility and bioavailability of poorly soluble drugs. In the field of nanotechnology， it serves as a stabilizer etc.， enriching preparation methods. In gel technology， its self-assembly behavior and thermosensitive properties facilitate controlled drug release. In biologics， it improves targeting efficiency and reduces side effects. In gene engineering， it enhances delivery efficiency and expression levels. In 3D printing， it provides novel strategies for precise drug release control and the production of high-quality biological products. As a versatile material， poloxamer holds promising prospects in the pharmaceutical field.

Facing the requirements of promoting the healthy China initiative and improving people's health, the "bone health program" was proposed in 2024. In-depth development of a traditional Chinese medicine(TCM) prevention and control system is of strategic significance to the implementation of the "bone health program". Focusing on osteoporosis(OP), a representative disease affecting people's bone health, this paper concludes that accelerating the research on the prevention and control of OP by TCM is conducive to enhancing the knowledge and awareness of OP among the public, and it is beneficial to revealing the evolutionary pattern of OP and improving the understanding and management of this disease. Additionally, it can provide an overall framework for and strengthen the systematicity and completeness of the research on the prevention and treatment of OP by TCM. Meanwhile, it can help to explore new research paradigms and optimize the existing research model, so as to promote innovative breakthroughs in the prevention and treatment of bone health-related diseases by TCM. Under the overall layout of the "bone health program", importance should be attached to the early prevention and the innovation of very early diagnosis and intervention of OP. Emphasis should be put on the discovery of the target network of disease and treatment mechanism for revealing the core pathogenesis of OP and the therapeutic mechanism of TCM. In addition to local lesions of the bone and its clinical outcomes, attention should be paid to the development of multiple metabolic complications. The fusion of advanced interdisciplinary technologies should be promoted for OP and its complications, and thus a research and development system based on clinical application scenarios and driven by big data can be built. The measures above will facilitate the progress in the prevention and treatment of OP and other bone diseases by TCM and provide new momentum for enriching and deepening the research connotation of the "bone health program".
Osteoporosis/therapy* ; Humans ; Medicine, Chinese Traditional/methods* ; Drugs, Chinese Herbal/therapeutic use* ; China ; Bone and Bones/drug effects*

Jiuwei Xifeng Granules have become a Chinese patent medicine in the market. Because the formula contains Os Draconis, a top-level protected fossil of ancient organisms, the formula was to be improved by replacing Os Draconis with Ostreae Concha. To evaluate whether the improved formula has the same effectiveness and safety as the original formula, a randomized, double-blind, parallel-controlled, equivalence clinical trial was conducted. This study enrolled 288 tic disorder(TD) of children and assigned them into two groups in 1∶1. The treatment group and control group took the modified formula and original formula, respectively. The treatment lasted for 6 weeks, and follow-up visits were conducted at weeks 2, 4, and 6. The primary efficacy endpoint was the difference in Yale global tic severity scale(YGTSS)-total tic severity(TTS) score from baseline after 6 weeks of treatment. The results showed that after 6 weeks of treatment, the declines in YGTSS-TSS score showed no statistically significant difference between the two groups. The difference in YGTSS-TSS score(treatment group-control group) and the 95%CI of the full analysis set(FAS) were-0.17[-1.42, 1.08] and those of per-protocol set(PPS) were 0.29[-0.97, 1.56], which were within the equivalence boundary [-3, 3]. The equivalence test was therefore concluded. The two groups showed no significant differences in the secondary efficacy endpoints of effective rate for TD, total score and factor scores of YGTSS, clinical global impressions-severity(CGI-S) score, traditional Chinese medicine(TCM) response rate, or symptom disappearance rate, and thus a complete evidence chain with the primary outcome was formed. A total of 6 adverse reactions were reported, including 4(2.82%) cases in the treatment group and 2(1.41%) cases in the control group, which showed no statistically significant difference between the two groups. No serious suspected unexpected adverse reactions were reported, and no laboratory test results indicated serious clinically significant abnormalities. The results support the replacement of Os Draconis by Ostreae Concha in the original formula, and the efficacy and safety of the modified formula are consistent with those of the original formula.
Adolescent ; Child ; Child, Preschool ; Female ; Humans ; Male ; Double-Blind Method ; Drugs, Chinese Herbal/therapeutic use* ; Tic Disorders/drug therapy* ; Treatment Outcome

Process analytical technology(PAT) is a key means for digital transformation and upgrading of the traditional Chinese medicine(TCM) manufacturing process, serving as an important guarantee for consistent and controllable TCM product quality. Near-infrared(NIR) spectroscopy has become the core technology for measuring the TCM manufacturing process. By incorporating NIR spectroscopy into PAT and starting from the construction of a smart platform for the TCM manufacturing process, this paper systematically described the development history and innovative application of the combination of NIR spectroscopy with chemometrics in measuring the TCM manufacturing process by the research team over the past two decades. Additionally, it explored the application of a validation method based on accuracy profile(AP) in the practice of NIR spectroscopy. Furthermore, the software development progress driven by NIR spectroscopy supported by modeling technology was analyzed, and the prospect of integrating NIR spectroscopy in smart factory control platforms was exemplified with the construction practices of related platforms. By integrating with the smart platform, NIR spectroscopy could improve production efficiency and guarantee product quality. Finally, the prospect of the smart platform application in measuring the TCM manufacturing process was projected. It is believed that the software development for NIR spectroscopy and the smart manufacturing platform will provide strong technical support for TCM digitalization and industrialization.
Spectroscopy, Near-Infrared/methods* ; Drugs, Chinese Herbal/analysis* ; Software ; Medicine, Chinese Traditional ; Quality Control