6-Thioguanine(6-TG)is an antineoplastic agent used in treatment of acute leukemia.However,significant interindividual variability in dosing regimens and frequent clinical manifestations of hepatotoxicity and myelosuppression as adverse effects have affected its therapeutic efficacy.Consequently,the development of rapid analytical methods for 6-TG in clinical samples,enabling continuous therapeutic drug monitoring of plasma concentrations,holds substantial significance in optimizing dosage regimens,mitigating adverse reactions,and investigating drug metabolism mechanisms.In this study,multi-tipped gold nanostars(AuNSs)were prepared.With bis-(p-sulfonylphenyl)phenylphosphine molecule as the protecting agent and internal standard molecule,the AuNSs were assembled onto a highly sensitive surface-enhanced Raman(SERS)substrate for developing a ratio-based SERS quantitative analysis method for 6-TG in serum.The AuNSs containing multiple tips and gaps exhibited strong local surface plasmon resonance effect and SERS activity,ensuring the sensitivity of the analytical method.Furthermore,the introduction of internal standard molecules could improve the reproducibility,which guaranteed this method suitable for rapid analysis of drug molecules in complex samples.Quantitative analysis of 6-TG was achieved with linear detetion range of 1.0×10?4-1.0 mmol/L.In the spiked recovery experiments of serum,the RSD was less than 5.32%,and the recoveries were 94%-104%,which proved that this method could be used for rapid quantitative determination of 6-TG in serum.This method provided a powerful tool for studying drug pharmacokinetics,which could promote the optimization of the usage methods of anti-cancer drugs,and it was expected to further enhance the clinical efficacy and safety of 6-TG,enabling it to achieve the best therapeutic effect.

Objective To compare the application effects of plankton multiplex polymerase chain reac-tion-capillary electrophoresis(PCR-CE),SYBR Green Ⅰ real-time quantitative PCR(qPCR)and microwave digestion-vacuum filtration-automated scanning electron microscopy(MD-VF-Auto SEM)in the diagnosis of drowning.Methods Lung,liver and kidney tissues from 212 drowned corpses and 30 non-drowned corpses were examined respectively by the three drowning-related plankton testing methods,and the detection rates of plankton in each tissue by three methods were compared.Results In drowned corpses,the total detection rates of PCR-CE,qPCR,and MD-VF-Auto SEM were 93.9%,96.2%,and 95.3%,respectively,with no statistically significant difference(P>0.05).The detection rate of lung tissue by MD-VF-Auto SEM(100%)was higher than those of PCR-CE and qPCR(P<0.05),and there was no significant difference in the detection rates of the three methods in liver or kidney tissues(P>0.05).In non-drowning corpses,a small number of diatoms(less than 10 cells/10 g)were detected by MD-VF-Auto SEM method,only in liver and kidney tissues,while the other two methods yielded negative results for all tissues.Conclusion All three methods have good efficacy in the examination of drowned corpses.The MD-VF-Auto SEM method directly observes diatom morpho-logical characteristics through scanning electron microscopy,and the qualitative and quantitative analy-ses are intuitive and accurate.It has great advantages in the examination of difficult degradation samples.The PCR-CE method and qPCR method have a low sample demand(0.5 g),are easy to operate and have short detection time(4-7 h).They are easy to be applied in the grassroots depart-ments and are suitable for the rapid determination of drowned corpses in routin cases.The combina-tion of the two DNA methods with the MD-VF-Auto SEM method can increase the detection rate of plankton,ensuring the reliability of examination results.This combined use is of significant importance in the application of drowning diagnosis.

Alveolar bone reconstruction simulation is an effective means for quantifying orthodontics, but currently, it is not possible to directly obtain human alveolar bone material models for simulation. This study introduces a prediction method for the equivalent shear modulus of three-dimensional random porous materials, integrating the first-order Ogden hyperelastic model to construct a computed tomography (CT) based porous hyperelastic Ogden model (CT-PHO) for human alveolar bone. Model parameters are derived by combining results from micro-CT, nanoindentation experiments, and uniaxial compression tests. Compared to previous predictive models, the CT-PHO model shows a lower root mean square error (RMSE) under all bone density conditions. Simulation results using the CT-PHO model parameters in uniaxial compression experiments demonstrate more accurate prediction of the mechanical behavior of alveolar bone under compression. Further prediction and validation with different individual human alveolar bone samples yield accurate results, confirming the generality of the CT-PHO model. The study suggests that the CT-PHO model proposed in this paper can estimate the material properties of human alveolar bone and may eventually be used for bone reconstruction simulations to guide clinical treatment.
Humans ; Tomography, X-Ray Computed/methods* ; Porosity ; Alveolar Process/physiology* ; Bone Density ; Computer Simulation ; Elasticity ; X-Ray Microtomography ; Stress, Mechanical ; Finite Element Analysis ; Models, Biological

Neuropathic pain, a debilitating condition caused by dysfunction of the somatosensory nervous system, remains difficult to treat due to limited understanding of its molecular mechanisms. Bioinformatics analysis identified cerebellin 2 (CBLN2) as highly enriched in human and murine proprioceptive and nociceptive neurons. We found that CBLN2 expression is persistently upregulated in dorsal root ganglia (DRG) following spinal nerve ligation (SNL) in mice. In addition, transcription factor SOX11 binds to 12 cis-regulatory elements within the Cbln2 promoter to enhance its transcription. SNL also induced SOX11 upregulation, with SOX11 and CBLN2 co-localized in nociceptive neurons. The siRNA-mediated knockdown of Sox11 or Cbln2 attenuated SNL-induced mechanical allodynia and thermal hyperalgesia. High-throughput sequencing of DRG following intrathecal injection of CBLN2 revealed widespread gene expression changes, including upregulation of numerous NF-κB downstream targets. Consistently, CBLN2 activated NF-κB signaling, and inhibition with pyrrolidine dithiocarbamate reduced CBLN2-induced pain hypersensitivity, proinflammatory cytokines and chemokines production, and neuronal hyperexcitability. Together, these findings identified the SOX11/CBLN2/NF-κB axis as a critical mediator of neuropathic pain and a promising target for therapeutic intervention.
Animals ; Neuralgia/metabolism* ; Ganglia, Spinal/metabolism* ; Up-Regulation ; Mice ; NF-kappa B/metabolism* ; SOXC Transcription Factors/genetics* ; Male ; Neuroinflammatory Diseases/metabolism* ; Mice, Inbred C57BL ; Nerve Tissue Proteins/genetics* ; Hyperalgesia/metabolism* ; Signal Transduction ; Spinal Nerves

The prevalence of Class III malocclusion varies among different countries and regions. The populations from Southeast Asian countries (Chinese and Malaysian) showed the highest prevalence rate of 15.8%, which can seriously affect oral function, facial appearance, and mental health. As anterior crossbite tends to worsen with growth, early orthodontic treatment can harness growth potential to normalize maxillofacial development or reduce skeletal malformation severity, thereby reducing the difficulty and shortening the treatment cycle of later-stage treatment. This is beneficial for the physical and mental growth of children. Therefore, early orthodontic treatment for Class III malocclusion is particularly important. Determining the optimal timing for early orthodontic treatment requires a comprehensive assessment of clinical manifestations, dental age, and skeletal age, and can lead to better results with less effort. Currently, standardized treatment guidelines for early orthodontic treatment of Class III malocclusion are lacking. This review provides a comprehensive summary of the etiology, clinical manifestations, classification, and early orthodontic techniques for Class III malocclusion, along with systematic discussions on selecting early treatment plans. The purpose of this expert consensus is to standardize clinical practices and improve the treatment outcomes of Class III malocclusion through early orthodontic treatment.
Humans ; Malocclusion, Angle Class III/classification* ; Orthodontics, Corrective/methods* ; Consensus ; Child

In this study, araucarene diterpenes, characterized by a pimarene skeleton with a variably oxidized side chain at C-13, were investigated. A total of 16 araucarene diterpenoids and their derivatives were isolated from the woods of Agathis dammara, including 11 previously unreported compounds: dammaradione (1), dammarones D-G (2, 5, 14, 15), dammaric acids B-F (8-12), and dammarol (16). The structures of these new compounds were elucidated using high-resolution electrospray ionization mass spectroscopy (HR-ESI-MS) and one-dimensional/two-dimensional (1D/2D) nuclear magnetic resonance (NMR), while their absolute configurations were determined through the electronic circular dichroism (ECD) exciton chirality method and Snatzke's method. The hypoglycemic activity of all isolated compounds was evaluated using a transgenic zebrafish model, and a structure-activity relationship (SAR) analysis was conducted. Araucarone (3) and dammaric acid C (9), serving as representative compounds, demonstrated significant hypoglycemic effects on zebrafish. The primary mechanism involves the promotion of pancreatic β cell regeneration and glucose uptake. Specifically, these compounds enhance the differentiation of pancreatic endocrine precursor cells (PEP cells) into β cells in zebrafish.
Zebrafish ; Animals ; Diterpenes/isolation & purification* ; Insulin-Secreting Cells/cytology* ; Glucose/metabolism* ; Hypoglycemic Agents/isolation & purification* ; Molecular Structure ; Structure-Activity Relationship ; Plant Extracts/pharmacology* ; Regeneration/drug effects*

OBJECTIVES: This study explores the differences in fluid flow within alveolar cancellous bone at various sites under orthodontic forces and elucidates the relationship between fluid shear stress and bone remodeling. These fin-dings lay the groundwork for understanding the biomechanical mechanisms of orthodontic tooth movement. METHODS: Stress relaxation tests were performed on human alveolar bone samples to determine material parameters by using the Prony series. An inverse model of alveolar bone was then developed for numerical simulations of fluid-structure interactions to calculate fluid flow within cancellous bone. Meanwhile, a rat model of tooth movement was established to investigate variations in bone remodeling speeds across different regions. RESULTS: The microstructural distribution of cancellous alveolar bone was similar in humans and rats. The bone volume fraction and trabecular thickness gradually decreased from root cervical region to root apical region, while the trabecular space gradually increased. Under the influence of orthodontic forces, fluid shear stress within cancellous bone showed spatial variability across different levels, with the highest shear stress occurring at the root apical region, ranging from 0 to 0.936 6 Pa. Additionally, the rat model of tooth movement indicated that bone remodeling occurred more rapidly at the root apical region. CONCLUSIONS Fluid stimulation has a remarkable effect on al-veolar bone remodeling, causing changes in the structure of alveolar bone and ultimately regulating the speed of structu-ral remodeling.
Bone Remodeling ; Animals ; Tooth Movement Techniques ; Rats ; Alveolar Process/physiology* ; Stress, Mechanical ; Humans ; Biomechanical Phenomena ; Cancellous Bone/physiology* ; Shear Strength

OBJECTIVE: To summarize the research progress of bioactive scaffolds in the repair and regeneration of osteoporotic bone defects. METHODS: Recent literature on bioactive scaffolds for the repair of osteoporotic bone defects was reviewed to summarize various types of bioactive scaffolds and their associated repair methods. RESULTS: The application of bioactive scaffolds provides a new idea for the repair and regeneration of osteoporotic bone defects. For example, calcium phosphate ceramics scaffolds, hydrogel scaffolds, three-dimensional (3D)-printed biological scaffolds, metal scaffolds, as well as polymer material scaffolds and bone organoids, have all demonstrated good bone repair-promoting effects. However, in the pathological bone microenvironment of osteoporosis, the function of single-material scaffolds to promote bone regeneration is insufficient. Therefore, the design of bioactive scaffolds must consider multiple factors, including material biocompatibility, mechanical properties, bioactivity, bone conductivity, and osteogenic induction. Furthermore, physical and chemical surface modifications, along with advanced biotechnological approaches, can help to improve the osteogenic microenvironment and promote the differentiation of bone cells. CONCLUSION With advancements in technology, the synergistic application of 3D bioprinting, bone organoids technologies, and advanced biotechnologies holds promise for providing more efficient bioactive scaffolds for the repair and regeneration of osteoporotic bone defects.
Humans ; Tissue Scaffolds/chemistry* ; Bone Regeneration ; Osteoporosis/therapy* ; Tissue Engineering/methods* ; Biocompatible Materials/chemistry* ; Printing, Three-Dimensional ; Calcium Phosphates/chemistry* ; Osteogenesis ; Ceramics ; Cell Differentiation ; Hydrogels ; Bioprinting ; Bone and Bones

The genome tagging project (GTP) plays a pivotal role in addressing a critical gap in the understanding of protein functions. Within this framework, we successfully generated a human influenza hemagglutinin-tagged sperm-specific protein 411 (HA-tagged Ssp411) mouse model. This model is instrumental in probing the expression and function of Ssp411. Our research revealed that Ssp411 is expressed in the round spermatids, elongating spermatids, elongated spermatids, and epididymal spermatozoa. The comprehensive examination of the distribution of Ssp411 in these germ cells offers new perspectives on its involvement in spermiogenesis. Nevertheless, rigorous further inquiry is imperative to elucidate the precise mechanistic underpinnings of these functions. Ssp411 is not detectable in metaphase II (MII) oocytes, zygotes, or 2-cell stage embryos, highlighting its intricate role in early embryonic development. These findings not only advance our understanding of the role of Ssp411 in reproductive physiology but also significantly contribute to the overarching goals of the GTP, fostering groundbreaking advancements in the fields of spermiogenesis and reproductive biology.
Animals ; Female ; Humans ; Male ; Mice ; Spermatids/metabolism* ; Spermatogenesis/physiology* ; Spermatozoa/metabolism* ; Thioredoxins/genetics*