OBJECTIVE To explore the optimal parameters of simmered Rhei Radix et Rhizoma and the correlation between the chroma values and the intrinsic composition of simmered Rhei Radix et Rhizoma decoction pieces powder.METHODS The single-factor-response surface method was used to investigate the simmering temperature,simmering time,paper dosage and plant ash dos-age,the response surface experiment was carried out on the basis of the single factor experiment,the appearance traits,total anthraqui-nones,free anthraquinones,leachables,sennoside A and B contents were taken as indicators,the analytic hierarchy process(AHP)was used to give weights to each index,and the process was optimized.The chroma values of raw and simmered products were deter-mined by electronic eye,the correlation and regression analysis were carried out by SPSS22.0 software,and the chroma-component re-gression equation was constructed.RESULTS The optimal process of simmering Rhei Radix et Rhizoma was 140 ℃,5 times of plant ash,2 layers of wet paper wrapped and being simmered for 2.5 h.CONCLUSION The simmering process of Rhei Radix et Rhizoma optimized by AHP combined with response surface method is reasonable and feasible,the color of decoction pieces has a significant correlation with the component content,and the regression equation constructed is reliable,which can predict the intrinsic component content of decoction pieces through chroma values.

Objective To study carbapenem-resistant Enterobacterales(CRE)infection in the neurosurgical inten-sive care unit(NS-ICU)under the combination of active screening using anal swabs and bundled intervention mea-sures in environment with high prevalence of CRE infection,and provide scientific basis for healthcare-associated in-fection(HAI)prevention and control.Methods Inpatients in NS-ICU from 2020 to 2021 were selected as the con-trol group,and didn't undergo active anal swab screening.NS-ICU inpatients from 2022 to 2023 were taken as the trial group,and implemented intervention of active anal swab screening.Isolation measures for CRE positive cases in two groups were implemented,and the incidence of CRE HAI between two groups of patients were compared.Results 645 patients were actively screened for CRE,with a total of 912 screenings.The overall screening positive rate was 9.21％,and the rectal CRE colonization rate in NS-ICU patients was 13.02％(84/645),out of which Klebsiella pneumoniae accounted for 92.86％(n=78 strains).The positive screening rates in patients in the trial group within 48 hours after admission as well as on day 3-7,day 8-15,and 16-30 were 3.30％,4.94％,13.68％,and 18.85％,respectively.With prolonged hospitalization time,the positive rate of CRE anal swab screening gradually increased.During the study period,the overall CRE HAI rate was 6.24％(72/1 153).After implementing active screening intervention,the CRE HAI rate in the trial group was lower than that in the control group(3.57％[23/645]vs 9.65％[49/508],P＜0.001).Conclusion In hospital environment with high CRE prevalence,implementing active screening and bundled intervention measures can effectively identify CRE carriers and reduce the risk of infection caused by intestinal colonization.

OBJECTIVE To explore the optimal parameters of simmered Rhei Radix et Rhizoma and the correlation between the chroma values and the intrinsic composition of simmered Rhei Radix et Rhizoma decoction pieces powder.METHODS The single-factor-response surface method was used to investigate the simmering temperature,simmering time,paper dosage and plant ash dos-age,the response surface experiment was carried out on the basis of the single factor experiment,the appearance traits,total anthraqui-nones,free anthraquinones,leachables,sennoside A and B contents were taken as indicators,the analytic hierarchy process(AHP)was used to give weights to each index,and the process was optimized.The chroma values of raw and simmered products were deter-mined by electronic eye,the correlation and regression analysis were carried out by SPSS22.0 software,and the chroma-component re-gression equation was constructed.RESULTS The optimal process of simmering Rhei Radix et Rhizoma was 140 ℃,5 times of plant ash,2 layers of wet paper wrapped and being simmered for 2.5 h.CONCLUSION The simmering process of Rhei Radix et Rhizoma optimized by AHP combined with response surface method is reasonable and feasible,the color of decoction pieces has a significant correlation with the component content,and the regression equation constructed is reliable,which can predict the intrinsic component content of decoction pieces through chroma values.

Objective To study carbapenem-resistant Enterobacterales(CRE)infection in the neurosurgical inten-sive care unit(NS-ICU)under the combination of active screening using anal swabs and bundled intervention mea-sures in environment with high prevalence of CRE infection,and provide scientific basis for healthcare-associated in-fection(HAI)prevention and control.Methods Inpatients in NS-ICU from 2020 to 2021 were selected as the con-trol group,and didn't undergo active anal swab screening.NS-ICU inpatients from 2022 to 2023 were taken as the trial group,and implemented intervention of active anal swab screening.Isolation measures for CRE positive cases in two groups were implemented,and the incidence of CRE HAI between two groups of patients were compared.Results 645 patients were actively screened for CRE,with a total of 912 screenings.The overall screening positive rate was 9.21％,and the rectal CRE colonization rate in NS-ICU patients was 13.02％(84/645),out of which Klebsiella pneumoniae accounted for 92.86％(n=78 strains).The positive screening rates in patients in the trial group within 48 hours after admission as well as on day 3-7,day 8-15,and 16-30 were 3.30％,4.94％,13.68％,and 18.85％,respectively.With prolonged hospitalization time,the positive rate of CRE anal swab screening gradually increased.During the study period,the overall CRE HAI rate was 6.24％(72/1 153).After implementing active screening intervention,the CRE HAI rate in the trial group was lower than that in the control group(3.57％[23/645]vs 9.65％[49/508],P＜0.001).Conclusion In hospital environment with high CRE prevalence,implementing active screening and bundled intervention measures can effectively identify CRE carriers and reduce the risk of infection caused by intestinal colonization.

Objective:To investigate the clinical features, diagnosis and treatment of oblique vaginal septum syndrome (OVSS).Methods:The clinical data of 80 patients with OVSS admitted to The Second Hospital of Hebei Medical University from July 2005 to July 2023 were retrospectively analyzed. According to the classification system of OVSS proposed by Female Genital Anomalies Study Group, Chinese Obstetricians and Gynecologists Association in 2021, the patients were divided into four groups. The clinical manifestations, accompanied urinary system abnormalities, diagnosis and treatment methods and treatment outcomes were observed.Results:According to the above classification system, among the 80 patients with OVSS, 35 patients (44%, 35/80) were categorized as type Ⅰ, 33 patients (41%, 33/80) were categorized as type Ⅱ, 2 patients (3%, 2/80) were categorized as type Ⅲ and 10 patients (13%, 10/80) were categorized as type Ⅳ. The main onset symptom of patients was periodic abdominal pain (70%, 56/80), vaginal bleeding (20%, 16/80), dysuria or fecal impaction (15%, 12/80), vaginal mucopurulent discharge (10%, 8/80). The morbidity of combined urinary system abnormalities was 88% (70/80), and the most common urinary system abnormality was ipsilateral renal agenesis (81%, 65/80). Bilateral kidneys were normal in 13% (10/80) patients, and 6% (5/80) were combined with other urinary system abnormalities. A total of 74 patients underwent vaginal oblique septectomy or septum excision. Five of the 10 patients with type Ⅳ underwent hysterectomy on the cervical atresia side, 4 patients received hysteroscopy combined with cervicoplasty+oblique septotomy or septum excision, and one patient selected delayed menstruation. Two patients underwent laparoscopic resection of the dysplasia kidney and ectopic ureter which opening to the vagina. Eleven patients with endometriosis cyst, hydrosalpinx or empyema underwent laparoscopic surgery.Conclusions:The main symptom of type Ⅰ and Ⅳ patients is abdominal pain, while the main symptom of type Ⅱ and Ⅲ patients is bleeding. Magnetic resonance imaging (MRI) has advantages in the evaluation of complex OVSS, and MRI is recommended before operation to exclude other axial reproductive tract dysplasia and complex urinary system dysplasia. If there is leakage of urine, vaginal discharge or complex deformity, it is necessary to multidisciplinary discussion and formulate a reasonable surgical plan. The first treatment is related to the prognosis of patients especially children, and should be highly valued.

Objective:To explore the anatomical parameters of the ideal trajectory for pedicle screw fixation through the lamina in the treatment of L 5 spondylolysis. Methods:CT data from 40 male patients with bilateral L 5 spondylolysis (age, 24.95±4.01 years; range, 20-36 years), treated at the 940th Hospital of PLA Joint Logistics Support Force between January 2021 and June 2024, were analyzed. Three-dimensional vertebral models were reconstructed using this data. Measurements included the lumbosacral angle, the thickness at the midpoint of the superior and inferior lamina edges, mid-lamina thickness, the distance from the lateral edge of the lamina to the spinous process midline, the thickness at the defect of the pars interarticularis, and the vertical diameter of the defect. The screws were inserted from the inferior edge of the lamina, passing through the pars interarticularis defect, and exiting at the superior edge of the pedicle. In the vertical direction of the lamina, the inferior and superior edges of the lamina were divided into three zones, named A, B, C (for the inferior lamina edge) and 1, 2, 3 (for the superior pedicle edge). Seven trajectories (A2, A3, B1, B2, B3, C2, and C3) were designed by combining these zones. Screws with diameters of 5.0, 4.5, 4.0, and 3.5 mm were sequentially inserted along each trajectory. Screw trajectories with an insertion success rate ≥95% were selected and evaluated for feasibility. Parameters such as screw length, medial inclination angle, caudal inclination angle, and entry point position were measured. The ideal trajectory and screw dimensions were determined by considering anatomical features, screw characteristics, and insertion safety. Results:The measurement results from the 3D model showed that the lumbosacral angle was 36.22°±5.23°, and the midpoint thickness of the superior lamina edge was 4.14±0.66 mm (left) and 4.18±0.65 mm (right), the mid-lamina thickness was 6.73±0.72 mm (left) and 6.72±0.70 mm (right), the midpoint thickness of the inferior lamina edge was 6.50±0.56 mm (left) and 6.50±0.66 mm (right), the distance from the lateral edge of the lamina to the spinous process midline was 25.95±2.86 mm (left) and 26.39±3.10 mm (right), the thickness at the pars defect was 9.67±0.57 mm (left) and 9.67±0.51 mm (right), and the vertical diameter of the pars defect was 18.76±2.16 mm (left) and 19.26±2.03 mm (right). No statistically significant differences were found between the left and right sides for these parameters ( P>0.05). The trajectories considered feasible and with an insertion success rate ≥95% were B2, B3, C2, and C3. Safe screw diameters were B2 (4.5 mm), B3 (4.0 mm), C2 (4.0 mm), and C3 (3.5 mm). Corresponding screw lengths were B2 (38.28±2.34 mm), B3 (37.03±2.99 mm), C2 (38.37±2.42 mm), and C3 (36.88±2.87 mm). The caudal inclination angles were B2 (52.73°±5.29°), B3 (55.06°± 4.46°), C2 (49.09°±3.92°), and C3 (50.18°±4.36°). The medial inclination angles were B2 (21.21°±3.01°), B3 (5.11°±1.58°), C2 (22.55°±2.46°), and C3 (12.59°±1.80°). The distances from the entry point to the spinous process midline were B2 (13.23±1.68 mm), B3 (13.15±1.46 mm), C2 (11.12±0.64 mm), and C3 (11.09±0.65 mm). The distances from the entry point to the root of the spinous process were B2 (8.23±1.46 mm), B3 (8.21±1.31 mm), C2 (6.65 ±0.76 mm), and C3 (6.67±0.72 mm). Differences in screw length, caudal inclination angle, medial inclination angle, and entry point position across trajectories were statistically significant ( P<0.05). Conclusion:The ideal screw trajectory for L 5 spondylolysis involves insertion through the midpoint of the entry zone, passing through the pars defect, and exiting at the midpoint of the superior edge of the pedicle. The optimal entry point is located on the inferior edge of the lamina, 8.23±1.46 mm from the root of the spinous process and 13.23±1.68 mm from the spinous process midline. The screw should be placed at a caudal inclination angle of 52.73°±5.29° and a medial inclination angle of 21.21°±3.01°. The recommended screw length is 38.28±2.34 mm, with a diameter of 4.5 mm (range, 4.5-5.0 mm).

Clinicians need to focus on various points in the diagnosis and treatment of insomnia.This article prescribed the treatment protocol based on the unique features,such as insomnia in the elderly,women experiencing specific physiologi-cal periods,children insomnia,insomnia in sleep-breathing disorder patients,insomnia in patients with chronic liver and kidney dysfunction.It pro-vides some reference for clinicians while they make decision on diagnosis,differentiation and treat-ment methods.

Objective To analyze epidemiological characteristics and changing trends of common respiratory infectious diseases among 6-19 year-old population in Shenzhen from 2013 to 2021, and to provide a reference for prevention and control. Methods Data of influenza, mumps and varicella reported cases among the population aged 6-19 years in Shenzhen from 2013 to 2021 were collected, and descriptive methods and Joinpoint regression model were used to analyze epidemiological characteristics and trends of incidences. Results Between 2013 and 2022 in Shenzhen, the average annual incidence rates of influenza, mumps, and varicella among the population aged 6-19 years were 961.44/100 000, 157.70/100 000, and 664.34/100 000 respectively. The incidence of influenza showed an upward trend in 10 years, with an annual percent change (APC) of 52.88% (P<0.05). The incidence of mumps and varicella both showed an 'up-down' trend, with an inflection point in 2019. The incidence APC of mumps were 11.51% and -43.49%, respectively (P>0.05), while the incidence APC of varicella were 28.88% and -50.03%, respectively (P<0.05), respectively. From the point of seasonal distribution, the incidence of three infectious diseases all showed bimodal distribution, with peaks in winter (December to January of the following year) and at the turn from spring to summer (April to June). The proportion of reported cases of three infectious diseases among people aged 6-<10 years old exceeded 60%. The proportion of varicella cases among people aged 10-<15 and 15-19 was on the rise. The incidence rate of influenza and varicella in people aged 15-19 years increased fastest, with APCs of 77.89% and 33.00%, respectively (both P<0.05). Conclusions The trend analysis based on Joinpoint regression model displayed that the reported incidence of influenza among people aged 6-19 years in Shenzhen during 2013-2022 showed an upward trend, and the incidence of varicella had an 'up-down' trend. Children aged 6-<10 years old are the main incidence group, and the prevention and control of infectious diseases in primary schools should be further promoted. Meanwhile, the rapid rise in the incidence of respiratory infectious diseases among people aged 15-19 years old and the increase in the proportion of varicella cases among people aged 10-19 years old suggest that intervention should be carried out to address the influential factors such as immunization gaps and concentrated accommodation in the older age group of minors.

BACKGROUND: Mayer-Rokitansky-Küster-Hauser (MRKH) syndrome is a severe congenital disorder characterized by vaginal hypoplasia caused by dysplasia of the Müllerian duct. Patients with MRKH syndrome often require nonsurgical or surgical treatment to achieve satisfactory vaginal length and sexual outcomes. The extracellular matrix has been successfully used for vaginal reconstruction. METHODS: In this study, we developed a new biological material derived from porcine vagina (acellular vaginal matrix, AVM) to reconstruct the vagina in Bama miniature pigs. The histological characteristics and efficacy of acellularization of AVM were evaluated, and AVM was subsequently transplanted into Bama miniature pigs to reconstruct the vaginas. RESULTS: Macroscopic analysis showed that the neovaginas functioned well in all Bama miniature pigs with AVM implants. Histological analysis and electrophysiological evidence indicated that morphological and functional recovery was restored in normal vaginal tissues. Scanning electron microscopy showed that the neovaginas had mucosal folds characteristics of normal vagina. No significant differences were observed in the expression of CK14, HSP47, and a-actin between the neovaginas and normal vaginal tissues. However, the expression of estrogen receptor (ER) was significantly lower in the neovaginas than in normal vaginal tissues. In addition, AVM promoted the expression of b-catenin, c-Myc, and cyclin D1. These results suggest that AVM might promotes vaginal regeneration by activating the b-catenin/cMyc/cyclin D1 pathway. CONCLUSION This study reveals that porcine-derived AVM has potential application for vaginal regeneration.

Objective:To explore the anatomical parameters of the ideal trajectory for pedicle screw fixation through the lamina in the treatment of L 5 spondylolysis. Methods:CT data from 40 male patients with bilateral L 5 spondylolysis (age, 24.95±4.01 years; range, 20-36 years), treated at the 940th Hospital of PLA Joint Logistics Support Force between January 2021 and June 2024, were analyzed. Three-dimensional vertebral models were reconstructed using this data. Measurements included the lumbosacral angle, the thickness at the midpoint of the superior and inferior lamina edges, mid-lamina thickness, the distance from the lateral edge of the lamina to the spinous process midline, the thickness at the defect of the pars interarticularis, and the vertical diameter of the defect. The screws were inserted from the inferior edge of the lamina, passing through the pars interarticularis defect, and exiting at the superior edge of the pedicle. In the vertical direction of the lamina, the inferior and superior edges of the lamina were divided into three zones, named A, B, C (for the inferior lamina edge) and 1, 2, 3 (for the superior pedicle edge). Seven trajectories (A2, A3, B1, B2, B3, C2, and C3) were designed by combining these zones. Screws with diameters of 5.0, 4.5, 4.0, and 3.5 mm were sequentially inserted along each trajectory. Screw trajectories with an insertion success rate ≥95% were selected and evaluated for feasibility. Parameters such as screw length, medial inclination angle, caudal inclination angle, and entry point position were measured. The ideal trajectory and screw dimensions were determined by considering anatomical features, screw characteristics, and insertion safety. Results:The measurement results from the 3D model showed that the lumbosacral angle was 36.22°±5.23°, and the midpoint thickness of the superior lamina edge was 4.14±0.66 mm (left) and 4.18±0.65 mm (right), the mid-lamina thickness was 6.73±0.72 mm (left) and 6.72±0.70 mm (right), the midpoint thickness of the inferior lamina edge was 6.50±0.56 mm (left) and 6.50±0.66 mm (right), the distance from the lateral edge of the lamina to the spinous process midline was 25.95±2.86 mm (left) and 26.39±3.10 mm (right), the thickness at the pars defect was 9.67±0.57 mm (left) and 9.67±0.51 mm (right), and the vertical diameter of the pars defect was 18.76±2.16 mm (left) and 19.26±2.03 mm (right). No statistically significant differences were found between the left and right sides for these parameters ( P>0.05). The trajectories considered feasible and with an insertion success rate ≥95% were B2, B3, C2, and C3. Safe screw diameters were B2 (4.5 mm), B3 (4.0 mm), C2 (4.0 mm), and C3 (3.5 mm). Corresponding screw lengths were B2 (38.28±2.34 mm), B3 (37.03±2.99 mm), C2 (38.37±2.42 mm), and C3 (36.88±2.87 mm). The caudal inclination angles were B2 (52.73°±5.29°), B3 (55.06°± 4.46°), C2 (49.09°±3.92°), and C3 (50.18°±4.36°). The medial inclination angles were B2 (21.21°±3.01°), B3 (5.11°±1.58°), C2 (22.55°±2.46°), and C3 (12.59°±1.80°). The distances from the entry point to the spinous process midline were B2 (13.23±1.68 mm), B3 (13.15±1.46 mm), C2 (11.12±0.64 mm), and C3 (11.09±0.65 mm). The distances from the entry point to the root of the spinous process were B2 (8.23±1.46 mm), B3 (8.21±1.31 mm), C2 (6.65 ±0.76 mm), and C3 (6.67±0.72 mm). Differences in screw length, caudal inclination angle, medial inclination angle, and entry point position across trajectories were statistically significant ( P<0.05). Conclusion:The ideal screw trajectory for L 5 spondylolysis involves insertion through the midpoint of the entry zone, passing through the pars defect, and exiting at the midpoint of the superior edge of the pedicle. The optimal entry point is located on the inferior edge of the lamina, 8.23±1.46 mm from the root of the spinous process and 13.23±1.68 mm from the spinous process midline. The screw should be placed at a caudal inclination angle of 52.73°±5.29° and a medial inclination angle of 21.21°±3.01°. The recommended screw length is 38.28±2.34 mm, with a diameter of 4.5 mm (range, 4.5-5.0 mm).