ObjectiveThis paper aims to investigate and evaluate the staged efficacy and safety of the representative empirical prescription of the “Zhu Ke Jiao” theory， Qijia Rougan prescription， combined with entecavir in the treatment of hepatic fibrosis in chronic hepatitis B. MethodsA multicenter randomized controlled clinical study was conducted， and 101 patients diagnosed with chronic hepatitis B-related hepatic fibrosis （CHB-HF） who met the diagnosis and inclusion criteria were randomly assigned to an observation group （Qijia Rougan prescription + entecavir） and a control group （entecavir）. The treatment duration was 24 weeks. Liver stiffness measurement （LSM）， fibrosis-4 index （FIB-4）， portal vein diameter， hepatitis B serology， biochemical indicators， hepatic fibrosis markers in serum ［hyaluronic acid （HA）， laminin （LN）， procollagen Ⅲ peptide （PⅢP）， and type Ⅳ collagen （Ⅳ-C）］， and traditional Chinese medicine syndrome scores were used as efficacy evaluation indicators. Efficacy assessments and explorations of different staged subgroups of Qijia Rougan prescription were conducted according to LSM values based on the Metavir pathological staging standard. ResultsA total of 98 cases were included for statistical analysis， with 49 cases in the observation group and 49 in the control group. The general data of the patients in both groups were comparable. Compared with the same group before treatment， the observation group showed a significant reduction in LSM and FIB-4 （P<0.01）， as well as notable improvements in LN， Ⅳ-C， and various TCM syndrome scores （P<0.05， P<0.01）. When compared to the control group after treatment， the observation group demonstrated significant improvements in LSM， FIB-4， and various TCM syndrome score indicators （P<0.05， P<0.01）， indicating that the observation group performed better than the control group. Subgroup analysis of the regression of hepatic fibrosis stages showed that compared to the same group before treatment， the observation group had better improvement in regression of stages F2 and F3 （P<0.05）. When compared to the control group after treatment， the observation group exhibited superior improvement in regression of stage F3 （P<0.05）. No adverse events occurred in either group during the treatment period. ConclusionCompared with entecavir alone， the combination of Qijia Rougan prescription and entecavir significantly improves the degree of hepatic fibrosis and clinical TCM symptoms in patients. The optimal intervention period is primarily during stage F3， which is a potential “interception” point of the “Zhu Ke Jiao” theory.

ObjectiveTo construct a machine learning model combining two-dimensional shear wave elastography （2D-SWE） and serological markers， and to investigate its clinical value in differentiating primary biliary cholangitis （PBC） from overlap syndrome （OS）. MethodsA total of 199 patients with pathologically confirmed PBC or OS in Nantong Third People’s Hospital from January 2021 to December 2025 were retrospectively enrolled， with 125 patients in the PBC group and 74 in the OS group. The patients were randomly divided into a training set with 139 patients and a test set with 60 patients at a ratio of 7∶3. Related data were collected， including serological markers， conventional two-dimensional ultrasound parameters， and 2D-SWE parameters （including velocity of shear wave ［VS］ and liver fibrosis index ［LFI］）. The independent-samples t test was used for comparison of normally distributed continuous data between two groups， and the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between two groups； the chi-square test was used for comparison of categorical data between two groups. The univariate and multivariate Logistic regression analyses were used to identify independent predictive factors， which were then incorporated into six machine learning models， and 5-fold cross-validation was used for optimization of parameters. The indicators including the area under the receiver operating characteristic curve （AUC） were compared in the test set to determine the best model， and the SHapley additive exPlanations （SHAP） analysis was used for model interpretation. ResultsFemale patients accounted for 87.8% in the OS group and 79.2% in the PBC group. Compared with the PBC group， the OS group had significantly higher age， VS， LFI， splenic area， aspartate aminotransferase， total bilirubin， prothrombin time， immunoglobulin G （IgG）， and immunoglobulin M （Z=-2.883， -6.524， -4.000， -3.061， -2.194， -2.372， -4.079， -6.964， and -2.709， all P<0.05） and a significantly lower platelet count （Z=4.098， P<0.001）， and there were also significant differences between the two groups in the proportion of patients with positive anti-nuclear antibody， fibrosis stage， and inflammation grade （χ²=3.458， 63.198， and 101.038， all P<0.05）. Variables without multicollinearity were included in the regression analysis， and the multivariate Logistic regression analysis showed that VS （odds ratio ［OR］=4.503， 95% confidence interval ［CI］： 1.698 — 11.943， P=0.003）， LFI （OR=1.813， 95%CI： 1.050 — 3.132， P=0.033）， and IgG （OR=1.121， 95%CI： 1.026 — 1.226， P=0.012） were independent predictive factors for differentiating PBC from OS. Six machine learning models were constructed based on these variables， among which the logistic regression model showed the best predictive performance in the test set， with an AUC of 0.881 （95%CI： 0.788 — 0.974）， a sensitivity of 0.731， and a specificity of 0.794. The SHAP analysis showed that IgG contributed the most to model prediction. ConclusionThe noninvasive multimodal machine learning model combining 2D-SWE parameters （VS， LFI） and serum IgG can effectively differentiate PBC from OS， providing a reference for clinical decision-making regarding the need for liver biopsy.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

ObjectiveTo investigate the association between metabolic associated fatty liver disease （MAFLD） and the risk of atherosclerotic cardiovascular disease （ASCVD）， and to provide data support for the prevention and treatment of such metabolic-associated diseases in clinical practice. MethodsAn observation cohort was established for the workers of Kailuan who underwent physical examination for the first time from June 2006 to October 2007 and had complete liver assessment data， without the history of malignant tumor， MAFLD or ASCVD. According to the presence or absence of MAFLD， the patients were divided into non-MAFLD group with 67 565 patients and MAFLD group with 29 004 patients， and according to the presence or absence of ASCVD， the patients were divided into non-ASCVD group with 69 141 patients and ASCVD group with 481 patients. The group t-test or the Wilcoxon rank-sum test was used for comparison of continuous data between the two groups. The χ² test was used for comparison of categorical data between the two groups. The life-table method was used to calculate the cumulative incidence rates of new-onset ASCVD and MAFLD； the Kaplan-Meier method was used to plot the survival curves of the cumulative incidence rates of ASCVD in the MAFLD group and the non-MAFLD group and the cumulative incidence rates of MAFLD in the ASCVD group and the non-ASCVD group， and the log-rank test was used for comparison of cumulative incidence rates between two groups. A multivariate Cox proportional-hazards regression model analysis was used to investigate the impact of MAFLD on the risk of ASCVD and the impact of ASCVD on the risk of MAFLD. ResultsCompared with the non-MAFLD group， the MAFLD group had significantly higher levels of body mass index （BMI）， waist circumference， systolic blood pressure （SBP）， diastolic blood pressure （DBP）， resting heart rate， alanine aminotransferase， uric acid （UA）， fasting blood glucose （FBG）， triglyceride （TG）， total cholesterol， low-density lipoprotein cholesterol， and high sensitivity C-reactive protein （hs-CRP）， as well as significanty lower levels of estimated glomerular filtration rate （eGFR） and high-density lipoprotein cholesterol （all P <0.05）. Compared with the non-ASCVD group， the ASCVD group had significantly higher levels of BMI， waist circumference， SBP， DBP， UA， FBG， TG， and hs-CRP and a significantly lower level of eGFR （all P<0.05）. The incidence rate of new-onset ASCVD continued to increase over time in the MAFLD group and the non-MAFLD group， while the incidence rate of new-onset MAFLD firstly increased and then remained stable over time in the ASCVD group and the non-ASCVD group. There were 4 263 cases （14.70%） of new-osnet ASCVD in the MAFLD group， with an incidence density of 12.90 per 1 000 person-years， while there were 6 529 cases （9.66%） of new-osnet ASCVD in the non-MAFLD group， with an incidence density of 8.24 per 1 000 person-years， and there were significant differences in the incidence density and cumulative incidence rate of ASCVD between the two groups （χ²=519.09 and 531.80， both P<0.05）. There were 148 cases （30.77%） of new-onset MAFLD in the ASCVD group， with an incidence density of 40.10 per 1 000 person-years， while there were 32 194 cases （46.56%） of new-onset MAFLD in the non-ASCVD group， with an incidence density of 57.59 per 1 000 person-years， and there were significant differences in the incidence density and cumulative incidence rate of MAFLD between the two groups （χ²=19.29 and 30.78， both P<0.05）. The corrected multivariate Cox proportional-hazards regression model analysis showed that MAFLD was a risk factor for new-onset ASCVD （hazard ratio ［HR］=1.11， 95% confidence interval ［CI］： 1.06 — 1.16， P<0.001）， while ASCVD was a protective factor against new-onset MAFLD （HR=0.72， 95%CI： 0.61 — 0.85， P<0.001）. ConclusionThere is a significant association between MAFLD and ASCVD， with an increase in the risk of ASCVD in the MAFLD population and a reduction in the risk of MAFLD in the ASCVD population.

Objective To investigate the expression characteristics of c-MET protein in colorectal cancer (CRC) and its associations with clinicopathological parameters, MET gene amplification status, and prognosis, and to evaluate the concordance between immunohistochemistry (IHC) and fluorescence in situ hybridization (FISH) detection strategies, thereby providing evidence for patient selection for MET-targeted therapy. Methods A total of 193 formalin-fixed paraffin-embedded (FFPE) tissue samples from CRC patients were collected. Immunohistochemistry (IHC) was used to detect c-MET protein expression, and fluorescence in situ hybridization (FISH) was performed to evaluate MET gene amplification status. The associations between c-MET protein expression and clinicopathological characteristics, including KRAS, NRAS, and BRAF mutation status, as well as progression-free survival (PFS), were analyzed. The concordance between IHC and FISH detection results was also evaluated. Results c-MET protein expression was significantly higher in tumor tissues than in adjacent normal tissues (P<0.05). Significant differences in c-MET expression were observed between primary tumors and liver or peritoneal/pelvic metastatic lesions (P<0.05). The proportion of high c-MET expression was significantly higher in KRAS-mutant patients than in KRAS wild-type patients (41.38% vs. 16.92%, P<0.05). The MET gene amplification rate was 8.29% (16/193), including clustered or diffuse amplification in 1.55% (3/193) and heterogeneous amplification in 6.74% (13/193). No MET exon 14 skipping mutation or amplification was detected by next-generation sequencing (NGS). Using an IHC H-Score≥150 as the threshold, the positive percent agreement (PPA) between IHC-detected c-MET protein expression and FISH-detected MET gene amplification was 100%. All clustered MET amplification regions exhibited diffuse strong c-MET expression (IHC 3+). No statistically significant association was observed between c-MET expression level and PFS (P>0.05). Conclusion High c-MET expression may represent a potential therapeutic target for KRAS-mutant CRC patients. An H-Score ≥150 is recommended as the initial screening threshold to rapidly identify patients suitable for MET-targeted therapy, with FISH testing when necessary. Diffuse strong c-MET expression (IHC 3+) shows high concordance with clustered MET gene amplification.

ObjectiveTo explore the clinical safety of Feilike Mixture （FLK） in the real world. MethodsThe safety of all children who received FLK from 29 institutions in 12 provinces between January 21，2021 and December 25，2021 was evaluated through prospective centralized surveillance and a nested case control study. ResultsA total of 3 035 juveniles were included. There were 29 research centers involved，which are distributed across 12 provinces，including one traditional Chinese medicine （TCM） hospital and 28 general hospitals. The average age among the juveniles was （4.77±3.56） years old，and the average weight was （21.81±12.97） kg. Among them，119 cases （3.92%） of juveniles had a history of allergies. Acute bronchitis was the main diagnosis for juveniles，with 1 656 cases （54.46%）. FLK was first used in 2 016 cases （66.43%），and 142 juvenile patients had special dosages，accounting for 4.68%. Among them，92 adverse drug reactions （ADRs） occurred，including 73 cases of gastrointestinal system disorders，10 cases of metabolic and nutritional disorders，eight cases of skin and subcutaneous tissue diseases，two cases of vascular and lymphatic disorders，and one case of systemic diseases and various reactions at the administration site. The manifestations of ADRs were mainly diarrhea，stool discoloration，and vomiting，and no serious ADRs occurred. The results of multi-factor analysis indicated that special dosages （the use of FLK）［odds ratio （OR） of 2.642， 95% confidence interval （CI） of 1.105-6.323］，combined administration： spleen aminopeptide （OR of 4.978， 95%CI of 1.200-20.655），and reason for combined administration： anti-infection （OR of 1.814， 95%CI of 1.071-3.075） were the risk factors for ADRs caused by FLK. Conclusion92 ADRs occurred among 3 035 juveniles using FLK. The incidence of ADRs caused by FLK was 3.03%，and the severity was mainly mild or moderate. Generally，the prognosis was favorable after symptomatic treatment such as drug withdrawal or dosage reduction，suggesting that FLK has good clinical safety.

ObjectiveTo establish the specific chromatogram and quantitative analysis of multi-components by single-marker（QAMS） based on linear calibration using two reference substances（LCTRS）， explore the consistency between Hedyotis Herba dispensing granules and standard decoction， and evaluate the quality of the dispensing granules. MethodsHigh performance liquid chromatography（HPLC） specific chromatogram was established based on 15 batches of Hedyotis Herba standard decoction and 10 batches of the dispensing granules， and LCTRS was used to locate chromatographic peaks. The actual retention times of 7 characteristic peaks in the specific chromatogram was measured on 24 different types of C₁₈ columns， taking deacetyl asperulosidic acid and asperulosidic acid as the dual standard compounds， the retention times of the other 5 characteristic peaks were predicted and validated. Based on this， QAMS was developed to determine the contents of four components（deacetyl asperulosidic acid， deacetyl asperulosidic acid methyl ester， asperulosidic acid， and p-coumaric acid）. Then， the relative correction factors of deacetyl asperulosidic acid， deacetyl asperulosidic acid methyl ester and p-coumaric acid were calculated using the reference peak of asperulosidic acid in the dual standard compounds， and each component was quantified accordingly. Finally， the consistency between the dispensing granules and standard decoction was assessed by taking extract rate of the standard decoction， consistency of the specific chromatograms， contents and transfer rates of the indicator components as indexes， and the quality of the dispensing granules was evaluated. ResultsThere were 7 common peaks in the characteristic chromatogram of samples of Hedyotis Herba standard decoction and the dispensing granules， and four of them were identified by reference standards， namely deacetyl asperulosidic acid（peak 1）， deacetyl asperulosidic acid methyl ester（peak 3）， asperulosidic acid（peak 6） and p-coumaric acid（peak 7）. The similarity between the dispensing granules and the standard decoction was >0.9. The absolute deviation in the predicted retention time for each component by LCTRS was lower than that of the relative retention time method. The extract rate of the 15 batches of Hedyotis Herba standard decoction ranged from 7.89% to 14.60%， the contents of deacetyl asperulosidic acid， deacetyl asperulosidic acid methyl ester， asperulosidic acid and p-coumaric acid were 6.62-19.70， 3.83-17.99， 1.57-6.69， 1.62-4.52 mg·g^-1， and the transfer rates of these components from decoction pieces to the standard decoction were 22.89%-39.60%， 34.03%-62.24%， 24.25%-43.70%， and 40.58%-73.71%， respectively. The extract rate， index component contents and transfer rates from decoction pieces to the three batches of Hedyotis Herba dispensing granules（P1-P3）， produced by manufacturer A， were similar to those of the standard decoction prepared from the same batch of decoction pieces， and all fell within the specified range. The contents of the 4 indicator components in 7 batches of the dispensing granules（P4-P10） from manufacturers B-E were all within the range of the content converted from the standard decoction based on the quantity of the dispensing granules. ConclusionThe established specific chromatogram and QAMS based on LCTRS are reasonable and reliable. Based on the evaluation indicators of standard decoction yield， consistency of specific chromatograms， contents and transfer rates of the four index components， the 10 batches of Hedyotis Herba dispensing granules from various manufacturers have exhibited good consistency with the standard decoction， indicating that the current production process is relatively reasonable.

This consensus will introduce the characteristics of fillers used in the surgical cavities of domestic nasal surgery patients based on relevant literature and expert opinions. It will also provide recommendations for the selection of cavity fillers for different nasal diseases, with chronic sinusitis as a representative example.
Humans ; Nasal Cavity/surgery* ; Nasal Surgical Procedures ; China ; Consensus ; Sinusitis/surgery* ; Dermal Fillers

Objective To explore the correlation of MET status in patients with advanced prostatic acinar adenocarcinoma with the clinical pathological parameters and prognosis. Methods The specimen from 135 patients with advanced prostatic acinar adenocarcinoma was included. The expression of c-MET protein was detected via immunohistochemistry, and MET gene amplification was assessed by fluorescence in situ hybridization. The relationships of c-MET expression and gene amplification with clinicopathological features and prognosis were analyzed. Results The positive expression rate of c-MET was 52.60% (71/135). Compared with the c-MET expression in adjacent tissues, that in tumor tissues showed lower heterogeneous expression. Among the cases, 1.71% (2/117) exhibited MET gene polyploidy, but no gene amplification was detected. Positive c-MET expression was significantly correlated with high Gleason scores and grade groups (P=0.0073). However, no significant relationship was found between c-MET expression and progression-free survival or post-treatment t-PSA levels. Conclusion c-MET protein is expressed at a relatively low level in advanced prostatic acinar adenocarcinoma, suggesting that c-MET may not be a viable target for ADC drug development in prostatic acinar adenocarcinoma.