Objective To systematically analyze the spatiotemporal distribution characteristics and epidemiological trends of tracheal, bronchus, and lung cancer (TBL) disease burden attributed to air pollution globally and in China and the United States from 1990 to 2021, and to assess the patterns of disease burden changes from 2022 to 2031 based on predictive models, providing a scientific basis for formulating targeted TBL prevention and control strategies. Methods Based on the Global Burden of Disease (GBD) 2021 database, we analyzed the disease burden data of TBL attributed to air pollution globally and in China and the United States from 1990 to 2021. R Studio 4.3.2 software was used to analyze the corresponding trends and the Bayesian age-period-cohort (BAPC) prediction model was used to predict the status of the disease burden of TBL attributed to air pollution in the world and in China and the United States from 2022 to 2031. Results In 2021, China had the highest number of deaths and disability-adjusted life years attributed to air pollution (211 400 patients and 4.8947 million person-years), followed by the United States (6 000 patients and 124 300 person-years). The age-standardized mortality rate (ASMR) and age-standardized disability-adjusted life years rate (ASDR) of TBL due to air pollution in the world and in China and the United States showed a decreasing trend. From 1990 to 2021, the ASMR and ASDR of TBL in China due to air pollution were much higher than those in the United States and the global average. In terms of gender, from 1990 to 2021, the disease burden of male patients with TBL attributed to air pollution was much higher than that of female patients. The BAPC prediction model showed that from 2022 to 2031, the ASMR and ASDR of TBL attributed to air pollution showed an upward trend globally, while they showed a downward trend in China and the United States. Conclusion Over the past 30 years, the air pollution-related TBL disease burden in the world and in China and the United States has continued to decline, but China's disease burden is still significantly higher than the global average. The disease burden in men far exceeds that in women, with men and the population aged ≥50 years being high-risk groups. In the future, the global disease trend may reverse and rise, while China and the United States are expected to continuously decline. However, precise prevention and control for high-risk groups remains a key challenge.

ObjectiveThis paper aims to investigate and evaluate the staged efficacy and safety of the representative empirical prescription of the “Zhu Ke Jiao” theory， Qijia Rougan prescription， combined with entecavir in the treatment of hepatic fibrosis in chronic hepatitis B. MethodsA multicenter randomized controlled clinical study was conducted， and 101 patients diagnosed with chronic hepatitis B-related hepatic fibrosis （CHB-HF） who met the diagnosis and inclusion criteria were randomly assigned to an observation group （Qijia Rougan prescription + entecavir） and a control group （entecavir）. The treatment duration was 24 weeks. Liver stiffness measurement （LSM）， fibrosis-4 index （FIB-4）， portal vein diameter， hepatitis B serology， biochemical indicators， hepatic fibrosis markers in serum ［hyaluronic acid （HA）， laminin （LN）， procollagen Ⅲ peptide （PⅢP）， and type Ⅳ collagen （Ⅳ-C）］， and traditional Chinese medicine syndrome scores were used as efficacy evaluation indicators. Efficacy assessments and explorations of different staged subgroups of Qijia Rougan prescription were conducted according to LSM values based on the Metavir pathological staging standard. ResultsA total of 98 cases were included for statistical analysis， with 49 cases in the observation group and 49 in the control group. The general data of the patients in both groups were comparable. Compared with the same group before treatment， the observation group showed a significant reduction in LSM and FIB-4 （P<0.01）， as well as notable improvements in LN， Ⅳ-C， and various TCM syndrome scores （P<0.05， P<0.01）. When compared to the control group after treatment， the observation group demonstrated significant improvements in LSM， FIB-4， and various TCM syndrome score indicators （P<0.05， P<0.01）， indicating that the observation group performed better than the control group. Subgroup analysis of the regression of hepatic fibrosis stages showed that compared to the same group before treatment， the observation group had better improvement in regression of stages F2 and F3 （P<0.05）. When compared to the control group after treatment， the observation group exhibited superior improvement in regression of stage F3 （P<0.05）. No adverse events occurred in either group during the treatment period. ConclusionCompared with entecavir alone， the combination of Qijia Rougan prescription and entecavir significantly improves the degree of hepatic fibrosis and clinical TCM symptoms in patients. The optimal intervention period is primarily during stage F3， which is a potential “interception” point of the “Zhu Ke Jiao” theory.

ObjectiveTo establish an ultra-performance liquid fingerprint and multi-components determination method for Naomaili granules. To evaluate the quality of different batches by chemometrics， and the anti-neuroinflammatory effects of water extract and main components of Naomaili granules were tested in vitro. MethodsThe similarity and common peaks of 27 batches of Naomaili granules were evaluated by using Ultra performance liquid chromatography （UPLC） fingerprint detection. Ultra-performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS） technology was used to determine the content of the index components in Naomaili granules and to evaluate the quality of different batches of Naomaili granules by chemometrics. LPS-induced BV-2 cell inflammation model was used to investigate the anti-neuroinflammatory effects of the water extract and main components of Naomaili granules. ResultsThe similarity of fingerprints of 27 batches of samples was > 0.90. A total of 32 common peaks were calibrated， and 23 of them were identified and assigned. In 27 batches of Naomaili granules， the mass fractions of 14 components that were stachydrine hydrochloride， leonurine hydrochloride， calycosin-7-O-glucoside， calycosin，tanshinoneⅠ， cryptotanshinone， tanshinoneⅡ_A， ginsenoside Rb₁， notoginsenoside R₁， ginsenoside Rg₁， paeoniflorin， albiflorin， lactiflorin， and salvianolic acid B were found to be 2.902-3.498， 0.233-0.343， 0.111-0.301， 0.07-0.152， 0.136-0.228， 0.195-0.390， 0.324-0.482， 1.056-1.435， 0.271-0.397， 1.318-1.649， 3.038-4.059， 2.263-3.455， 0.152-0.232， 2.931-3.991 mg∙g^-1， respectively. Multivariate statistical analysis showed that paeoniflorin， ginsenoside Rg₁， ginsenoside Rb₁ and staphylline hydrochloride were quality difference markers to control the stability of the preparation. The results of bioactive experiment showed that the water extract of Naomaili granules and the eight main components with high content in the prescription had a dose-dependent inhibitory effect on the release of NO in the cell supernatant. Among them， salvianolic acid B and ginsenoside Rb₁ had strong anti-inflammatory activity， with IC₅₀ values of （36.11±0.15） mg∙L^-1 and （27.24±0.54） mg∙L^-1， respectively. ConclusionThe quality evaluation method of Naomaili granules established in this study was accurate and reproducible. Four quality difference markers were screened out， and eight key pharmacodynamic substances of Naomaili granules against neuroinflammation were screened out by in vitro cell experiments.

Objective: To understand the serum vitamin D and vitamin K 1 levels of children in the Qingdao area, so as to provide scientific grounds for appropriate vitamin supplementation. Methods: A total of 4 469 children aged 0-14 years old, who attended the children s healthcare outpatient clinics of a tertiary hospital in Qingdao, were enrolled in the current study between January 2023 and July 2024. The levels of vitamin D and vitamin K 1 were measured by liquid chromatography tandem mass spectrometry. The inter group differences were analyzed using Chi square test, Wilcoxon rank sum test, and Kruskal-Wallis H test. The correlation analysis of vitamin D and vitamin K 1 levels with age was performed using the Spearman correlation. Results: The serum vitamin D level among children was 28.72(22.67, 36.26)ng/mL. The vitamin D deficiency and insufficiency rates were 2.10% and 14.59 %, respectively. The serum 25-(OH)D 2 level was 0.29(0.14, 0.53)ng/mL, the serum 25-(OH)D 3 level was 27.99( 21.78 , 35.57)ng/mL and the serum vitamin K 1 level was 0.54(0.29, 1.04)ng/mL. The vitamin K 1 deficiency rate was 13.76%. Among different age stages, the serum vitamin D level was highest in infancy [37.45(30.39, 43.87)ng/mL] and lowest in school age children [22.39(18.00, 26.97)ng/mL]; the level of vitamin K 1 was highest in preschool children [0.79(0.41, 1.51) ng/mL] and lowest in school age children[0.45 (0.26, 0.76) ng/mL]; the serum vitamin D deficiency and insufficiency rates were highest in school age children (5.03% and 30.81%); the vitamin K 1 deficiency rate was highest in infancy (21.53%) ( H/χ 2=1 698.31, 253.70 , 137.85 , 583.79, 89.30, all P <0.05). Among different seasons, the serum vitamin D and vitamin K 1 levels were lowest in the winter [26.74(18.37, 35.86) and 0.50 (0.27, 0.94)ng/mL; H =50.71, 7.86]; the vitamin D deficiency and insufficiency rates were highest in the winter (5.41% and 24.80%; χ 2=59.93, 83.35) (all P <0.05). The serum vitamin D level had a moderate negative correlation with age ( r =-0.62), and there was a low positive correlation between the serum vitamin D and vitamin K 1 levels in infancy and early childhood ( r =0.21, 0.26) (all P <0.05). Conclusions The serum vitamin D and vitamin K 1 levels are lowest in school age children and in the winter, and the serum vitamin K 1 deficiency rate is highest in infancy. There is a need to focus on critical periods of infancy and school age, and strengthen interventions during the high risk winter season. The nutritional status of vitamin D and vitamin K 1 in children should be enhanced.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

AIM: To explore the effect of Kappa angle on changes in visual quality and stereoscopic acuity after regional refractive multifocal intraocular lens(MIOL)implantation in patients with high myopia complicated by cataract.METHODS:A retrospective analysis was conducted on data from patients with normal Kappa angle and high myopia complicated by cataract treated at the hospital from January 2024 to January 2025. Patients were divided into two groups based on the median preoperative Kappa angle(0.182 mm): Group A(00.05). The actual residual astigmatism in Group A was lower than that in Group B at 7 d, 1 and 3 mo postoperatively(all P<0.001). The proportion of eyes with near stereoscopic acuity <60″ was higher in Group A than in Group B, while the proportion of eyes with near stereoscopic acuity between 400″ and 3000″ was lower in Group A than in Group B(both P<0.05). Meanwhile, the incidence of visual disturbances in Group B was higher than that in Group A(P<0.05).CONCLUSION: The Kappa angle has no significant effect on visual acuity or objective visual quality in patients with normal Kappa angle and high myopia complicated by cataract after regional refractive MIOL implantation. However, patients with a larger Kappa angle exhibit higher postoperative residual astigmatism, worse near stereoscopic acuity, and a higher incidence of vision-related adverse symptoms.

Objective To investigate the status quo of limited social participation in young patients with ankylosing spondylitis (AS), and analyze its influencing factors. Methods Using the random number table method, a simple random sampling method was employed to select 320 young patients with ankylosing spondylitis who were admitted to the First Affiliated Hospital of Naval Medical University from June 2023 to June 2025. Chinese version of social participation scale was applied to evaluate the level of social participation of patients. The above patients were classified into unlimited group (n=148) and limited group (n=172). Logistic regression analysis was performed to analyze the independent influencing factors for limited social participation. Results Compared with the unlimited group, the limited group exhibited longer course of AS, higher BASDAI score, BASFI score, HAMA score, HAMD score and ASQoL score as well as lower PSSS score (P<0.05). Logistic regression analysis suggested that course of disease, high disease activity score, high anxiety score, high depression scores and low social support scores are the relevant factors for the restricted social participation of young patients with ankylosing spondylitis. Conclusion The phenomenon of limited social participation is common in young patients with AS, and its occurrence is the result of a combination of factors such as disease course, disease activity, anxiety, depression and social support level.

Background Lung tissue fibrosis caused by exposure to free silica (SiO₂) dust is the core pathological feature of silicosis. Lipocalin-2 (LCN2), as a secreted glycoprotein, plays an important role in various inflammatory diseases, but its specific role in silicosis-induced inflammatory injury remains unclear. Objective To identify differentially expressed genes (DEGs) and enriched pathways in the lung tissues of rats with silicosis, and to explore the regulatory mechanism of LCN2 in silicosis inflammation. Methods Twenty specific pathogen-free male SD rats were randomly divided into a control group and a silicosis model group (n=10 per group). The silicosis model was established via a single intratracheal instillation of silicon dioxide (SiO₂) suspension (50 mg), while the control group received an equal volume of normal saline. In vitro, NR8383 cells were divided into a control group and a SiO₂ treatment group. Hematoxylin-eosin (HE) staining and Van Gieson (VG) staining were used to evaluate alveolar structure damage, inflammatory infiltration, and collagen deposition in the lung tissues. Transcriptomic sequencing was applied to screen for DEGs and enriched signaling pathways. Western blot was used to detect the protein expression of interleukin-6 (IL-6), E-cadherin (ECA), cluster of differentiation 36 (CD36), liver X receptor (LXR), ATP-binding cassette transporter A1 (ABCA1), and LCN2 in both rat lung tissues and NR8383 cells. Immunohistochemistry was used to further assess LCN2 expression and localization. Additionally, NR8383 cells were treated with the LCN2 inhibitor ZINC00640089 and assigned to four groups: control, ZINC00640089-only, SiO₂, and SiO₂+ZINC00640089. Western blot was used to evaluate the expression of LCN2, IL-6, and interleukin-1β (IL-1β). Results HE and VG staining revealed disorganized lung tissue structure, damaged alveolar walls, nodule formation, and increased collagen deposition in the silicosis model group compared to the controls. Transcriptomic analysis identified 2723 DEGs in the lung tissues of silicosis rats (312 down-regulated and 2411 up-regulated) with LCN2 expression being significantly up-regulated. These DEGs were primarily enriched in pathways related to the innate immune response, extracellular matrix (ECM)-receptor interaction, and inflammatory response. Immunohistochemical staining confirmed elevated LCN2 levels in the lung tissues of the model rats. Western blot demonstrated that the protein levels of IL-6, CD36, and LCN2 were significantly increased (P<0.05), whereas ABCA1 and ECA were significantly decreased in the silicosis group (P<0.05). Similarly, in SiO₂-treated NR8383 cells, IL-6, CD36, and LCN2 expressions significantly increased (P<0.05), while ABCA1 and LXR significantly decreased (P<0.05). Compared with the SiO₂ group, treatment with ZINC00640089 significantly reduced the expression levels of LCN2, IL-6, and IL-1β (P<0.05). Conclusion LCN2 is significantly upregulated in both the lung tissues of silicosis rats and SiO₂-treated NR8383 cells. Inhibiting LCN2 expression effectively reduces the SiO₂-induced inflammatory response, indicating that LCN2 serves as a potential therapeutic target for silicosis.

Objective To explore the dominant views with positive results when performing echocardiography on common congenital heart disease (CHD) in children using the seven-step screening method for pediatric echocardiography. Methods The echocardiographic data of children with atrial septal defect, patent foramen ovale, ventricular septal defect, and patent ductus arteriosus were collected from September 2021 to February 2022. The disease type distribution, view distribution, and the dominant view distribution were analyzed. Dominant view referred to the view with a high ratio of positive result images per view to the total image in each disease. Results A total of 8 353 images of 1 633 children with common CHD were collected. There were 813 males and 820 females ageed 0-7 years, including 3 613 images in 701 patients with atrial septal defect, 1 178 images in 206 patients with patent foramen ovale, 2 857 images in 576 patients with ventricular septal defect, and 705 images in 150 patients with patent ductus arteriosus. The dominant views of atrial septal defect were subxiphoid 2-chamber view (92.96%), subxiphoid 4-chamber view (85.61%), parasternal 4-chamber view (62.07%), and parasternal short-axis view (38.50%). The dominant views of patent foramen ovale were subxiphoid 2-chamber view (82.69%) and subxiphoid 4-chamber view (65.41%). The dominant views of ventricular septal defect were parasternal 5-chamber view (79.73%), parasternal short-axis view (79.41%), parasternal 4-chamber view (58.18%), and parasternal long-axis view (51.11%). The dominant view of patent ductus arteriosus was parasternal short-axis view (98.80%). Conclusion The analysis of the lesion key areas of common CHD shows that there are 4 dominant views for atrial septal defect and ventricular septal defect, 2 for patent foramen ovale, and only 1 for patent ductus arteriosus. Clarifying the dominant views of common CHD is conducive to rapid and accurate diagnosis of diseases, clinical practice, teaching and scientific research.