BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

[摘 要] 目的：探讨年轻乳腺癌独特的DNA甲基化特征，筛选与预后相关的甲基化位点，构建并验证预后预测模型，并通过多组学整合及关键蛋白验证评估其临床价值。方法：收集癌症基因组图谱（TCGA）数据库中的乳腺癌样本DNA甲基化及临床数据，筛选年轻乳腺癌特有的甲基化位点。采用随机森林、LASSO回归及单因素和多因素Cox比例风险回归分析构建预后模型。使用受试者工作特征（ROC）曲线、校准曲线和一致性指数（C-index）评估模型性能，并比较高、低风险组间的多组学特征差异，在独立队列中通过免疫组化法检测模型关键基因LAMA5的蛋白表达，分析其与预后的关系。结果：年轻乳腺癌相较于老年乳腺癌，在启动子区域（尤其是CpG岛）呈现显著低甲基化特征。通过多步骤差异分析获得3 489个年轻乳腺癌特有的甲基化位点，经Cox比例风险回归筛选出12个与总生存期（OS）独立相关的位点，其中启动子区、基因体区和基因间区位点各4个。基于筛选出的12个甲基化位点构建的预测模型，在TCGA训练集中显示出良好的区分度，高风险组总生存期显著更差（P = 0.002 5），5、8和10年OS预测曲线下面积（AUC）达0.88～0.94。多组学分析显示，高风险组丝裂原活化蛋白激酶（MAPK）信号通路激活，TP53基因突变频率更高，雌激素受体α蛋白表达较低。将TP53突变状态及雌激素受体1（ESR1）mRNA表达水平等关键多组学指标纳入模型，构建综合列线图，其预测效能进一步提升。组织芯片验证显示，模型关键基因LAMA5蛋白表达阴性患者的OS更差（P = 0.046），且富集于三阴性乳腺癌，与模型高风险组的临床病理特征一致。结论：整合启动子和非启动子区域信息的基于12个甲基化位点的模型可用于年轻乳腺癌患者的预后分层。联合年龄、TP53突变及ESR1 mRNA表达水平构建的综合列线图显示出较单一甲基化模型更高的预测效能。

Autism spectrum disorder(ASD) is a neurodevelopmental disorder, and social impairment was one of the core symptoms of ASD, which can seriously affects the social life of patients.The pathogenesis of social impairment in ASD is unclear and it may involves many brain abnormalities.The related theories and hypotheses are numerous and there is no unified conclusion. Studies have shown that the cerebellum has extensive connections with brain networks and is involved in the regulation of social cognition, but its role in ASD has not been fully emphasized.The structural and functional abnormalities of the cerebellar-cortex (CC) loop in ASD patients can lead to language communication disorders, empathy disorders, difficulties in interpreting social cues, abnormal social reward processing and emotional regulation disorders, which are closely related to ASD social impairment. Noninvasive brain stimulation of the superficial cerebellum can improve the abnormal CC circuit in ASD patients, and the cerebellum can be considered as a target for the treatment of social disorders in ASD in the future.Based on the clinical and basic researches on social impairment in ASD in recent years, this article reviews the relevant manifestations of disorders which cerebellar and CC circuit involved, aiming to promote the development of related research in the future.

As the incidence of autism rises annually,its unknown pathogenesis makes it challenging to treat the varied repetitive and stereotyped behaviors that characterize its core symptoms.The striatum is an important brain region for the control of locomotor behaviors,featuring a unique mosaic structure,complex neural origin,and finely regulated developmental process that is highly susceptible to genetic and environmental influences.Both clinical and basic studies have indicated that abnormal development of the striatal nuclei may contribute to the pathogenesis of these repetitive stereotyped behaviors in autism.Clinical imaging data have primarily identified gross anatomical variations in the stratum(e.g.,its general outline),but lack the resolution necessary to detect the cellular and subcellular alterations within the region.By introducing the abnormalities in the spatiotemporal development of the striatum and their links to the characteristic behaviors of autism,this review aims to advance our understanding of the role of the striatum in autism pathogenesis and to inform future animal studies and clinical research.

Objective:To investigate the clinical value of continuous Bougie tube use in symmetrical three-port laparoscopic sleeve gastrectomy (LSG).Methods:The retrospective cohort study was conducted. The clinical data of 105 patients who underwent symmetrical three-port LSG at The First Hospital of Shanxi Medical University from October 2021 to October 2024 were collected. There were 57 males and 48 females, aged 27(range, 19-59)years. Of the 105 patients, 52 cases with continuous Bougie tube use during the surgery were divided into continuous group, while 53 cases with intermittent Bougie tube use were divided into intermittent group. Observation indicators: (1) surgical situations; (2) complications. Comparison of measurement data with normal distribution between groups was conducted using the independent sample t test. Comparison of measurement data with skewed distribution between groups was conducted using the Mann-Whitney U test. Comparison of count data between groups was conducted using the chi-square test. Results:(1) Surgical situations. All 105 patients underwent symmetrical three-port LSG. The operation time was (57±4)minutes versus (76±4)minutes for the continuous group and the intermittent group, volume of intraoperative blood loss was (26±6)mL versus (59±9)mL, time to first out-of-bed activities was (218±8)minutes versus (299±9)minutes, time to first anal exhaust was (19.6±2.9)hours versus (25.8±2.8)hours, visual analogue scale score for pain at 6 hours postoperatively was 2.3±1.0 versus 4.7±1.0, and duration of postoperative hospital stay was (1.5±0.6)days versus (3.1±0.9)days for the two groups, respectively. There were significant differences in the above indicators between the two groups( t=26.92, 22.31, 48.91, 11.15, 13.25, 10.21, P<0.05). (2) Complications. No severe postopera-tive complication occurred in any of the 105 patients. There were 26 cases and 38 cases with nausea and vomiting at 2 hours postoperatively, showing a significant difference between them ( χ2=5.19, P<0.05). Conclusion:Compared to intermittent Bougie tube use, continuous Bougie tube use during symmetrical three-port LSG can significantly shorten operation time and duration of postoperative hospital stay, reduce intraoperative bleeding and postoperative pain, accelerate recovery of patients, and lower the incidence of complications.

Autism spectrum disorder(ASD) is a neurodevelopmental disorder, and social impairment was one of the core symptoms of ASD, which can seriously affects the social life of patients.The pathogenesis of social impairment in ASD is unclear and it may involves many brain abnormalities.The related theories and hypotheses are numerous and there is no unified conclusion. Studies have shown that the cerebellum has extensive connections with brain networks and is involved in the regulation of social cognition, but its role in ASD has not been fully emphasized.The structural and functional abnormalities of the cerebellar-cortex (CC) loop in ASD patients can lead to language communication disorders, empathy disorders, difficulties in interpreting social cues, abnormal social reward processing and emotional regulation disorders, which are closely related to ASD social impairment. Noninvasive brain stimulation of the superficial cerebellum can improve the abnormal CC circuit in ASD patients, and the cerebellum can be considered as a target for the treatment of social disorders in ASD in the future.Based on the clinical and basic researches on social impairment in ASD in recent years, this article reviews the relevant manifestations of disorders which cerebellar and CC circuit involved, aiming to promote the development of related research in the future.

Objective:To investigate the clinical effect of indocyanine green angiography (ICGA)-assisted design and harvest of expanded flaps for scar reconstruction.Methods:This study was a retrospective observational study. From April 2019 to August 2023, 19 patients with scars (8 males, 11 females; aged 3-38 years) treated at the Plastic Surgery Hospital of Peking Union Medical College and Chinese Academy of Medical Sciences met the inclusion criteria. The scars were distributed on the head, face, trunk, and extremities. In stage Ⅰ surgery, skin soft tissue expanders were implanted in suitable areas around the scars for skin soft tissue expansion. In stage Ⅱ surgery, the scar tissue was excised, resulting in wound areas ranging from 100 to 210 cm 2, and expanded flaps were designed. ICGA was used to identify target perforators and their accompanying veins, and the flap design was adjusted to ensure the inclusion of complete arterial and venous axes. The expanded flap with an area of 120 to 240 cm2 was harvested using unilateral back-cut technique and transferred to the recipient site, and the donor site wound was sutured directly. The durations of the arterial and venous phases of ICGA during flap design were recorded. The length-to-width ratios of the back-cut flaps were calculated for different regions. After stage Ⅱ surgery, the blood perfusion and survival of the flap, the wound healing at the donor site, and the occurrence of complications were observed. During follow-up, the appearance, color, and texture of the patient's flap were observed. Results:The arterial phase of ICGA lasted 10-27 (18±5) s, and the venous phase lasted 78-116 (100±10) s. The length-to-width ratios of the back-cut flaps were 1.22±0.32, 1.63±0.12, and 1.15±0.21 for the head and neck, trunk, and limb regions, respectively. After stage Ⅱ surgery, one patient had a large area of insufficient blood perfusion in the flap. By comparing ICGA images before and after flap transfer, the sutures at the oral commissure were loosened, the blood flow of the flap was restored. The blood perfusion of the flaps in other patients was good. All flaps survived completely, with well-healed donor site wounds and no complications. During 0.5-14.0 months of follow-up, all flaps of patients demonstrated excellent appearance, with color and texture matching the surrounding skin.Conclusions:As a means of superficial blood flow visualization, ICGA can not only clearly show the microvascular distribution of the expanded flap before operation, assist in optimizing the design of the flap, but also evaluate the blood perfusion of the flap after operation, reduce the occurrence of complications, and provide a full-process navigation for the harvesting of expanded flaps, thereby improving the safety of flap transfer for scar reconstruction.

Botulinum toxin type A has been widely used in disease treatment and cosmetic shaping.Women of childbearing age are the key population using botulinum toxin type A.Consultations about this drug are gradually increasing,but domestic reports on the application and safety during pregnancy are relatively rare.This study reviews the case reports of using botulinum toxin type A during pregnancy and before pregnancy,as well as pregnancy outcomes of botulinum toxin poisoning during pregnancy,discussing the safety and limitations of using botulinum toxin type A during pregnancy.The study showed when used in pregnancy at therapeutic doses,botulinum toxin type A has good effects on patients and can alleriate the patients'symptoms.Patients can avoid surgery or using drugs with lower safety during pregnancy.Exposure to botulinum toxin type A during pregnancy does not increase the incidence of fetal defects.Botulinum antitoxin should be given promptly to pregnant women with botulinum toxin type A poisoning.According to the current research data,it is suggested that botulinum toxin type A can be used as a therapeutic agent during pregnancy after fully informing patients of the risks of medication.

Objective To compare image quality and clinical usefulness between single breath-hold three-dimensional magnetic resonance cholangiopancreatography with compressed sensing(3D BH-CS-MRCP)and with gradient and spin-echo(3D BH-GRASE-MRCP)and conventional three-dimensional breath-triggered magnetic resonance cholangiopancreatography(3D RT-MRCP).Methods A retrospective analysis was performed in 48 patients(26 males and 22 females,mean age of 53.14±15.19 years),who underwent 3D BH-GRASE-MRCP,3D BH-CS-MRCP and 3D RT-MRCP from September to December 2023.Pancreaticobiliary duct visibility,motion artifacts,background suppression,and overall image quality were scored on a 5-point scale by two radiologists.The relative contrast ratio of three bile duct segmentations(common bile duct,left and right intrahepatic bile ducts)were calculated,and the acquisition time of the three sequences was recorded.Friedman test with a post-hoc test was performed to compare image acquisition time,qualitative and quantitative results.Results The acquisition time was significantly shorter in the two breath-hold groups than for conventional 3D RT-MRCP(P＜0.001).There were no significant differences in overall image quality,motion artifacts,common bile duct and primary branch of intrahepatic bile duct among the three groups.The relative contrast ratio,intrahepatic biliary secondary branch visibility and background suppression score of 3D RT-MRCP and BH-CS-MRCP were significantly higher than those of BH-GRASE-MRCP(P＜0.01).The pancreatic duct(proximal,middle,distal)visibility score of 3D RT-MRCP was significantly better than that of BH-GRASE-MRCP(P=0.002,0.043,0.001),but the gallbladder and gallbladder duct visibility score of BH-GRASE-MRCP was higher than that of 3D RT-MRCP(P=0.036).There was no significant difference between 3D RT-MRCP and BH-CS-MRCP scores except for the middle and distal pancreatic duct visibility.Conclusion Breath-hold 3D MRCP with GRASE and CS can give us feasible options for pancreaticobiliary diagnosis,which significantly shortens the acquisition time without reducing the overall image quality.Compared with BH-GRASE-MRCP,BH-CS-MRCP has better consistency in pancreaticobiliary duct visibility and background suppression.