Objective:To compare 3D-printing-assisted surgery and conventional surgery in the treatment of Schazker type Ⅵ tibial plateau fractures.Methods:A retrospective study was conducted to analyze the clinical data of 50 patients with type Ⅵ tibial plateau fracture who had been treated from January 2019 to December 2021 at the 5 Departments of Orthopedics in The First Affiliated Hospital of Nanchang University, The First People's Hospital of Jiujiang, Pingkuang General Hospital, Ganzhou People's Hospital, and Nanchang Hongdu Hospital of Traditional Chinese Medicine. The patients were divided into 2 groups according to their different treatment methods. In the 3D printing group of 25 cases treated by 3D-printing-assisted surgery, there were 14 males and 11 females, with an age of (42.5±9.1) years; in the conventional group of 25 cases treated by conventional surgery, there were 13 males and 12 females with an age of (42.2±9.3) years. The 2 groups were compared in terms of operation time, intraoperative blood loss, intraoperative fluoroscopy frequency, fracture healing time, postoperative complications, the Rasmussen radiological scores and the American Hospital for Special Surgery (HSS) knee function scores at 6 and 12 months after operation.Results:There was no significant difference in the preoperative general data between the 2 groups, indicating comparability ( P>0.05). The operation time [(125.4±10.6) min], intraoperative blood loss [(206.2±16.3) mL], intraoperative fluoroscopy frequency [(9.2±2.7) times] and fracture healing time [(3.0±0.7) months] in the 3D printing group were all significantly less than those in the conventional group [(168.2±14.1) min, (303.2±20.4) mL, (15.5±3.5) times and (4.1±0.8) months] while the Rasmussen radiological scores (17.6±1.2 and 17.9±0.6) and HSS knee scores (90.8±6.4 and 91.5±5.6) at 6 and 12 months after operation in the 3D printing group were all significantly higher than those in the conventional group (16.2±2.6 and 16.7±2.2; 84.5±9.2 and 87.6±8.0) (all P<0.05). In the 3D printing group, there were 1 case of wound infection and 1 case of wound dehiscence after operation. In the conventional group, there were 2 cases of wound skin necrosis, 3 cases of wound dehiscence, 1 case of traumatic arthritis, 2 cases of wound infection, and 1 case of screw loosening. The incidence of complications in the 3D printing group (8.0%, 2/28) was significantly lower than that in the conventional group (36.0%, 9/25) ( P<0.05). Conclusion:In the treatment of Schatzker type VI tibial plateau fractures, compared with conventional surgery, 3D-printing-assisted surgery can lead to better curative outcomes, because it is conducive to lowering surgical difficulty, reducing postoperative complications, and promoting fracture union and functional recovery of the knee.

Objective:To identify the genetic variation in a mucopolysaccharidosis type Ⅱ(MPS Ⅱ)family, and conduct a functional study of iduronate-2-sulfatase(IDS): c.323A>C.Methods:A five-generation MPS Ⅱ family of 83 individuals including 4 patients from northern China was collected. Urine mucopolysaccharide and Alder-Reilly body were tested to assist the clinical diagnosis of MPS Ⅱ. IDS enzyme activity was detected on core family members. By the whole exome sequencing of a MPS Ⅱ patient in this family and bioinformatics analysis, the variant was screened and further identified by PCR-Sanger sequencing. Finally, to validate the function of the variant in vitro, the wild-type IDS overexpression plasmid(pCMV-hIDS-WT)and the IDS overexpression plasmid carrying the mutation site(pCMV-hIDS-c.323A>C)were transfected into COS-7 cells and the IDS activity was detected. Results:The proband(Ⅳ3)and Ⅳ4 were diagnosed as MPS Ⅱ by urine mucopolysaccharide, Alder-Reilly body, and IDS enzyme activity tests. Ⅳ3, Ⅳ4, Ⅲ19, and Ⅲ32 were determined to carry IDS: c.323A>C missense variant through the whole-exome sequencing, and diagnosed as MPS Ⅱ. Meanwhile, Ⅱ2, Ⅱ4, Ⅱ8, Ⅱ12, Ⅱ14, Ⅲ5, Ⅲ7, Ⅳ14 in the MPS Ⅱ family carried IDS: c.323A>C missense variant, and were excluded as MPS Ⅱ. The in vitro experiment in COS-7 cells showed that the missense mutation led to a significant decrease in IDS enzyme activity. Conclusion:The variant IDS: c.323A>C: p.Y108S significantly decreases the activity of IDS enzyme in vivo and in vitro, and it is identified as a pathogenic variant for MPS Ⅱ.

Objective:To explore the expression and clinical significance of mucin 5B in patients with primary intrahepatic bile duct stones (PHL) after hepatectomy.Methods:Collected the bile duct mucosa of 48 patients with intrahepatic bile duct stones (PHL group) and 16 patients with non-calculous benign liver disease (control group) who underwent hepatectomy in the Third Affiliated Hospital of Wenzhou Medical University from January 2014 to January 2019, Bile duct wall, bile and venous blood. The preoperative bile and serum indexes of the two groups were compared. Immunohistochemical staining was used to examine the expression of mucin 1 and mucin 5B in the bile duct wall, and the bile duct wall was examined pathologically by HE routine staining. With mucin 1 as a positive control and β-actin as an internal reference gene, real-time PCR was used to examine the mRNA expression levels of mucin 1 and mucin 5B in the bile duct mucosa. Pearson correlation analysis was used to analyze the correlation of variables within the PHL group.Results:The preoperative serum lipid indexes in the PHL group were higher than those in the control group, while the total bile acid concentration [(181.5±18.2) mmol/L vs. (192.1±22.5) mmol/L] and the molar percentage of bile acid [(80.7±1.6)% vs. (89.7±1.0)%] is lower than the control group, the difference is statistically significant ( P<0.05). The expression of mucin 1 mRNA in the PHL group was higher than that in the control group, but the difference was not statistically significant ( P>0.05). The expression of mucin 5B mRNA in the PHL group was significantly higher than that in the control group [(0.94±0.12) vs. (0.73±0.24)], the difference was statistically significant ( P<0.05); The increased expression of bile duct mucin 5B mRNA was negatively correlated with the level of total bile acids in bile ( r=-0.4, P<0.05). Conclusions:The increased expression of mucin 5B is closely related to PHL, which may be related to the promotion of bile acid absorption by the bile duct mucosal epithelium, which causes mucin to secrete into the bile in large quantities, leading to the formation of stone-causing bile.

Objective To investigate the relationship between Pst-Ⅰ polymorphism of mucin 4 gene and primary hepatolithiasis in the Chinese population.Methods Venous blood of 96 healthy controls and 56 patients with hepatolithiasis were collected,and DNA was extracted.Polymerase chain reaction combined with restriction enzyme (PCR-RFLP) digestion was used to detect Pst-Ⅰ polymorphism of mucin 4 gene in the two groups.The genotype and gene frequency between the two groups were then compared.Results The genotype frequencies of GC,GT,TT in the control and the hepatolithiasis groups were 21.3％,12.7％,55.6％ and 53.2％,41.2％,19.8％,respectively.The alleles C and T gene frequencies in the control and the hepatolithiasis groups were 21.5％,72.7％ and 66.3％,30.2％,respectively.There were significant differences in Pst-Ⅰ polymorphism of mucin 4 genotype frequency and gene frequency between the two groups.Conclusion The data showed Pst-Ⅰ polymorphism of mucin 4 gene was associated with primary hepatolithiasis in Chinese patients.

Objective Exploration of the application value of the third-generation dual source CT low tube voltage (70 kVp) scanning combined with advanced modeling iterative reconstruction (ADMIRE) technique in children with adenoid examination. Methods CT scans were performed in patients with clinically suspected adenoid hypertrophy. They were divided into two groups according to the time of treatment. Group A (40 cases) : low tube voltage (70 kVp) scan, reference tube current 163 mAs, reconstruction with ADMIER, Intensity 3; Group B (40 cases) : conventional 100 kVp, reference tube current 163 mAs, conventional (filtered back-projection, FBP) reconstruction;rest of the scanning parameters remained unchanged. The subjective scores and objective quality indicators of the images (CT value, image noise, signal noise ratio (SNR) , contrast noise ratio (CNR)) and radiation dose of the two groups were compared. Results The difference of radiation dose between group A and group B was statistically significant (P < 0.05). The radiation dose of group A was lower than that of group B by 77.58％.Compared with group B, the image noise of group A increased by 0.002％; the SNR decreased by 0.01％; CNR increased by 0.03％; there was no significant difference in objective quality evaluation index and subjective score between two groups in the image quality (P> 0.05). Conclusion The third-generation dual-source CT low-tube voltage (70 kVp) combined with ADMIRE reconstruction technique for children with adenoid scan can effectively reduce the radiation dose while ensuring image quality.

Objective: To investigate the association of iron with stress hormones and insulin resistance in patients with gestational diabetes mellitus (GDM). Methods: Seventy-five pregnant women diagnosed as GDM during 24-28 weeks were collected from January to November 2015 in Yantai Yuhuangding Hospital, and 75 normal pregnant women were used as control group. Blood glucose, insulin, stress hormones and iron metabolism related indexes were detected. Homeostasis model assessment for insulin resistance (HOMA-IR) was used to evaluate insulin resistance, and the correlation of iron metabolism with stress hormones and insulin resistance was analyzed. Results: Compared with control group, norepinephrine (NE) and epinephrine (E) levels were higher in GDM group (both P<0.05), but there was no significant difference in cortisol level between two groups (P>0.05). Serum ferritin (SF), serum iron, and transferrin saturation levels were higher in GDM group than those in control group(all P<0.01). Multivariate logistic analysis showed that cortisol, E, and NE levels were positively correlated with SF level in GDM group (all P<0.05). Cortisol and E levels were positively correlated with transferrin saturation (both P<0.05). SF and transferrin saturation were positively correlated with HOMA-IR in two groups (P<0.05 or P<0.01). Conclusion Iron overload may involve in dysfunction of stress adaptation and insulin resistance in patients with GDM. (Chin J Endocrinol Metab, 2018, 34: 563-566)

OBJECTIVETo compare the efficacy difference between acupotomy and acupuncture in the treatment of avascular necrosis of femoral head at the early and middle stages.

METHODSThe randomized controlled prospective study method was adopted. Sixty cases of avascular necrosis of femoral head at Ficat-ArletⅠto Ⅱ stages were randomized into an acupotomy group (32 cases) and an acupuncture group (28 cases) by the third part. In the acupotomy group, the acupotomy was adopted for the loose solution at the treatment sites of hip joint, once every two weeks, totally for 3 times. In the acupuncture group,points around the hip joint were selected and stimulated with warm acupuncture therapy, once every day, for 6 weeks. Harris hip score was observed before and after treatment. The efficacy was evaluated in the two groups.

RESULTSHarris hip score was improved significantly after treatment in the two groups (both<0.05). The result in acupotomy group was better than that in the acupuncture group (<0.05). The effective rate was 90.6% (29/32) in the acupotomy group, better than 75.0% (21/28) in the acupuncture group after treatment (<0.05).

CONCLUSIONSHarris hip score and the effective rate in the acupotomy group are better than those in the treatment with routine acupuncture for avascular necrosis of femoral head at the early and middle stages.

Objective To study the role of autophagy in the replication process of Toxoplasma proliferation. Meth-ods As the experimental groups, these cells were infected by Toxoplasma gondii tachyzoites at given MOI (2 ∶ 1, 4 ∶ 1 ,8 ∶ 1 ,16 ∶ 1 ) . Host cell autophagy was detected through acridine orange staining and MDC fluorescence stai-ning at different time points (1, 2, 4, 8, 24, 48, 96 hs post infection). Detect the condition of HEF cells autoph-agy with acridine orange fluorescence staining and MDC fluorescence staining, and detect the replication kinetics of Toxoplasma gondii infection at different time points using Giemsa staining. Results The results of acridine orange and MDC fluorescence staining showed that autophagy inhibitors and inducers could inhibit and promote the autoph-agy of HEF cells respectively. From the results of Giemsa staining, it was found that the proliferation of Toxoplasma gondii in HEF cells could be promoted with autophagy inducers and be inhibited with autophagy inhibitors. Conclu-sion The regulation on autophagy of host cell could regulate the proliferation and replication of Toxoplasma gondii.

It is difficult to reflect the properties of samples from the signal directly collected by the low field nuclear magnetic resonance (NMR) analyzer. People must obtain the relationship between the relaxation time and the original signal amplitude of every relaxation component by inversion algorithm. Consequently, the technology of T2 spectrum inversion is crucial to the application of NMR data. This study optimized the regularization factor selection method and presented the regularization algorithm for inversion of low field NMR relaxation distribution, which is based on the regularization theory of ill-posed inverse problem. The results of numerical simulation experiments by Matlab7.0 showed that this method could effectively analyze and process the NMR relaxation data.
Algorithms ; Humans ; Magnetic Resonance Spectroscopy

In clinical practice, incubators can contribute to better diagnosis and treatment of diseases. Currently, insulation medical equipment used for the newborn are mainly warm-boxes. With the use popularity of warm-boxes in the country, medical accidents caused by improper use are on the increase. According to neonatal insulation technology and standardized management of practice, this article puts forward technical requirements of infant incubators with constant temperature and humidity, operation regulations and management specifications to better regulate the use of such devices. Meanwhile, it also suggests national related departments to formulate "incubator technology management norms" and "warm-box technology and practice", intending to standardize industry behaviors and ensure medical safety.
Humans ; Incubators, Infant ; standards ; Infant, Newborn ; Materials Management, Hospital ; organization & administration ; Safety Management ; Temperature