Cats, owing to their physiological and immunological similarities with humans, have become increasingly valuable as model animals in virology research, drug development, and vaccine evaluation. They are irreplaceable in studies of feline immunodeficiency virus, feline coronavirus, and other related pathogens. However, cats are temperamentally sensitive, exhibit strong stress responses, and possess well-developed nervous systems as well as sharp claws and teeth. Consequently, the biosafety risks associated with infectious experiments using cats in animal biosafety level 2 laboratory (ABSL-2) are significantly higher than those encountered with conventional rodents. Drawing on long-term ABSL-2 operational experience, this article systematically reviews the entire workflow of infectious experiments in laboratory cats — from animal selection, pre-entry preparation, reception and quarantine, housing management, to infectious experimental procedures and incident response — identifying and addressing critical risk points at each stage. For strain selection, SPF-grade shorthair cats with defined genetic backgrounds and docile temperaments are recommended; sex and age should be scientifically matched to experimental objectives. During pre-entry preparation, emphasis is placed on dual-credential personnel management, health surveillance, standardized disinfection of environments and cages, feed and water standards, and robust record-keeping. During reception and quarantine, standardized protocols are established for transport control, appearance inspection, isolation quarantine, pathogen exclusion, and positive-reinforcement training. During infectious experimentation, a "three-fixed" husbandry principle is clearly implemented: dedicated caretakers, fixed feeding/cleaning times, and fixed cage positions. Disinfectant selection, autoclaving of waste, and daily veterinary rounds are rigorously enforced. Operational risk control includes detailed measures for graded personal protection, animal anesthesia and restraint, zoned operation within biosafety cabinets, and disposal of experimental waste. Contingency plans are formulated to address animal death, escape, personnel exposure, and spills of infectious materials. This study provides a reproducible and scalable technical pathway and operational standard for conducting infectious experiments in laboratory cats in ABSL-2 laboratories, offering a reference for other facilities undertaking similar work.

ObjectiveTo prepare rabbit anti-porcine inhibin polypeptide-keyhole limpet hemocyanin(KLH) conjugated polyclonal antibody and evaluate its effect on superovulation in C57BL/6J mice. MethodsNew Zealand white rabbits were immunized with a synthesized porcine inhibin polypeptide conjugated with KLH to produce anti-inhibin serum (AIS, i.e., inhibin polyclonal antibody). Female C57BL/6J mice received intraperitoneal injections of purified AIS in combination with pregnant mare serum gonadotropin (PMSG), followed by human chorionic gonadotropin (hCG) after 48 hours to induce superovulation. Oocytes obtained from superovulation were collected and counted 15 hours post-hCG administration, and the number of 2-cell embryos was assessed 24 hours after in vitro fertilization. ResultsAIS prepared by immunizing New Zealand White rabbits with KLH-conjugated porcine inhibin polypeptide was subjected to titer determination by indirect ELISA, showing titers reaching 1∶ 512 000. SDS-polyacrylamide gel electrophoresis analysis of ammonium sulfate-purified AIS revealed distinct 50 kDa and 25 kDa bands corresponding to the theoretical molecular weights of IgG antibody heavy and light chains, confirming successful production of porcine inhibin polyclonal antibody. Compared with conventional superovulation methods, AIS diluted 10-fold combined with PMSG significantly increased the number of oocytes obtained from superovulation in mice (P<0.05) by approximately 1.5-fold. ConclusionPorcine inhibin polyclonal antibody, as an improved superovulation reagent, can improve superovulation efficiency in C57BL/6J mice, and shows promising prospects for future applications.

Background::Computer-aided detection (CAD) software has been introduced to automatically interpret digital chest X-rays. This study aimed to evaluate the performance of CAD software (JF CXR-1 v3.0, which was developed by a domestic Hi-tech enterprise) in tuberculosis (TB) case finding in China.Methods::In 2019, we conducted an internal evaluation of the performance of JF CXR-1 v3.0 by reading standard images annotated by a panel of experts. In 2020, using the reading results of chest X-rays by a panel of experts as the reference standard, we conducted an on-site prospective study to evaluate the performance of JF CXR-1 v3.0 and local radiologists in TB case finding in 13 township health centers in Zhongmu County, Henan Province.Results::Internal assessment results based on 277 standard images showed that JF CXR-1 v3.0 had a sensitivity of 85.94% (95% confidence interval [CI]: 77.42%, 94.45%) and a specificity of 74.65% (95% CI: 68.81%, 80.49%) to distinguish active TB from other imaging conditions. In the on-site evaluation phase, images from 3705 outpatients who underwent chest X-ray detection were read by JF CXR-1 v3.0 and local radiologists in parallel. The imaging diagnosis of local radiologists for active TB had a sensitivity of 32.89% (95% CI: 22.33%, 43.46%) and a specificity of 99.28% (95% CI: 99.01%, 99.56%), while JF CXR-1 v3.0 showed a significantly higher sensitivity of 92.11% (95% CI: 86.04%, 98.17%) ( p < 0.05) and maintained high specificity at 94.54% (95% CI: 93.81%, 95.28%). Conclusions::CAD software could play a positive role in improving the TB case finding capability of township health centers.

Objective:To compare the efficacy of robot system-assisted versus freehand screw revision for ankylosing spondylitis (AS) with lower cervical fractures.Methods:A multicenter retrospective cohort study was conducted to analyze the clinical data of 57 patients with AS combined with lower cervical fractures admitted to Honghui Hospital Affiliated to Xi'an Jiaotong University School of Medicine, Henan Provincial People's Hospital, Zhengzhou Orthopedic Hospital, and Qilu Hospital of Shandong University, including 46 males and 11 females, aged 38-77 years [(65.4±9.5)years]. Injury segments involved C 3 in 7 patients, C 4 in 13, C 5 in 25, C 6 in 10, and C 7 in 2. All the patients underwent revision surgery, among whom, 22 patients were treated with robot system-assisted cervical pedicle screw placement (robot nailing group, with 190 screws), and 35 with freehand cervical pedicle screw placement (freehand nailing group, with 300 screws). The operative duration, intraoperative bleeding volume, frequency of intraoperative fluoroscopy, incision length, and length of hospital stay of the two groups were compared; the time of single nscrew insertion, the number of single nail revisions, the distance between screws and the anterior cortex, the accuracy of screw placement of grade 0 and grade 0+1 were recorded in the two groups. The visual analogue scale (VAS), Japanese Orthopedic Society (JOA) score, neck dysfunction index (NDI), American Spine Injury Association (ASIA) classification before operation, at 3 days, 3 months after operation and at the last follow-up were compared between the two groups. The complication rate was also noted. Results:All the patients were followed up for 12-16 months [(14.3±2.1)months]. The operative duration, intraoperative bleeding volume, and frequency of intraoperative fluoroscopy were (186.4±12.9)minutes, (486.1±68.6)ml, and (3.4±1.3)times in the robot nailing group, which were shorter or less than (206.7±14.4)minutes, (660.3±45.2)ml, and (13.5±3.6)times in the freehand nailing group ( P<0.01). The incision length was (9.4±2.4)cm in the robot nailing group, longer than (5.6±1.2)cm in the freehand nailing group ( P<0.01), and the length of hospital stay was (3.7±0.4)days, shorter than (4.4±1.4)days in the freehand nailing group ( P<0.01). The length of single nail insertion, the number of single nail revision, and the distance between the screws and the front cortex were (6.5±0.4)minutes, (1.1±0.1)times, and (3.5±1.3)mm in the robot nailing group, which were shorter or less than (11.6±0.2)minutes, (1.5±0.2)times, and (12.4±4.7)mm in the freehand nailing group ( P<0.01). The accuracy of the screw placement in the robot nailing group was 90.0% (171/190) and 95.8% (182/190) with level 0 and 0+1 screws, better than 80.0% (240/300) and 89.0% (267/300) in the freehand nailing group ( P<0.05). There was no significant difference in VAS, JOA score, NDI, or ASIA grading between the two groups before operation ( P>0.05). The VAS, JOA, and NDI scores at 3 days after operation were (3.1±0.6)points, (12.1±1.2)points, and (15.6±2.9)points, respectively in the robot nailing group, which were better than (5.0±1.4)points, (11.3±1.1)points and (22.5±3.7)points, respectively in the freehand nailing group ( P<0.05). No statistically significant difference was observed in the ASIA grade between the two groups at 3 days after operation ( P>0.05). There were no significant differences in VAS, JOA, NDI scores, or ASIA grading between the two groups at 3 months after operation and at the last follow-up ( P>0.05). Compared with those before operation, the VAS, JOA, NDI scores, and ASIA grading were significantly improved at 3 days, 3 months after operation and at the last follow-up in the two groups, which were further improved with the passage of time. Two patients in the robot nailing group had pneumonia, with a complication rate of 9% (2/22), while 2 patients in the freehand nailing group had dural sac rupture and cerebrospinal fluid leakage and 3 had lung infection after operation, with a complication rate of 14% (5/35) ( P<0.05). Conclusion:Compared with freehand nailing, the robot system-assisted nailing revision for AS with lower cervical fracture has more advantages in terms of the operative duration, length of hospital stay, intraoperative bleeding volume, frequency of intraoperative fluoroscopy nailing speed and accuracy, screw holding force, early pain relief, function restoration, and complication rate, despite longer surgical incision.

Objective To analyze the correlation between the number of oil chambers,the proportion of phloem at cross-section of Aucklandiae Radix and the contents of costunolide and dehydrocostuslactone,and the correlation between inulin quantity,vessel quantity and polysaccharide content in powder characteristics,so as to explore the scientific basis for Aucklandiae Radix"identifying the quality based on appearance differentiation".Methods The constant values of the microscopic features of oil chambers,inulin and vessels were determined by cross-sectional permanent slice method,chloral hydrate method and counting analysis method,and the contents of costunolide and dehydrocostuslactone as well as polysaccharide content were determined by the high-performance liquid chromatography(HPLC)and the phenol-sulfuric acid method,respectively,and the correlation in the two groups of data was analyzed by statistical methods.Results There was a significantly positive correlation between the number of oil chambers per unit area in the cross-section of Aucklandiae Radix and the number of oil chambers per unit area in the phloem and the contents of costunolide and dehydrocostuslactone;there was a significantly positive correlation between the quantity of inulin in the powder of Aucklandiae Radix and the polysaccharide content;there was no correlation between the quantity of vessels and the polysaccharide content.Conclusion This study initially established a new method and a new technology for quality evaluation of Chinese herbal medicines based on the determination of microscopic characteristic constants of Aucklandiae Radix,which can provide a new technical method for the quality control of Aucklandiae Radix.

Objective:To observe the therapeutic effect of combining low-frequency pulsed electrical stimulation with Beckman oral muscle exercise training in relieving drooling among persons with Parkinson′s disease (PD).Methods:A random number table was used to divide 120 PD patients with drooling into a mouth muscle training group, an electrical stimulation group, and an observation group, with 40 patients in each group. In addition to routine medication, the oral muscle training group was given Beckman oral muscle exercise training, the electrical stimulation group underwent low-frequency pulsed electrical stimulation treatment, while the observation group was provided with both. Before and after 4 weeks of treatment, the severity of salivation, the frequency of repeated empty swallowing, oral motor function, saliva secretion, and life quality of the three groups were evaluated using the Saliva Rating Scale (DRS), the Repeated Saliva Swallowing Test (RSST), oral motor function grading, the Parkinson′s Disease Saliva Clinical Scale (SCS-PD), saliva weighing, and the PD Quality of Life Scale (PDQ-39).Results:After the treatment the average DRS, SCS-PD, saliva weighing and PDQ-39 results of the observation group were significantly better than those before treatment and better than the other 2 groups′ averages. That group′s average RSST and oral motor function scores had increased significantly compared to before treatment, and compared with the other 2 groups′ averages at the same time point.Conclusions:Combining low-frequency pulsed electrical stimulation with Beckman oral muscle exercise can improve oral motor function, swallowing, and the life quality of PD patients who drool. It is more effective than electrical stimulation or oral muscle exercise training alone. Such combination therapy is worthy of clinical promotion and application.

Objective:To observe the therapeutic effect of combining low-frequency pulsed electrical stimulation with Beckman oral muscle exercise training in relieving drooling among persons with Parkinson′s disease (PD).Methods:A random number table was used to divide 120 PD patients with drooling into a mouth muscle training group, an electrical stimulation group, and an observation group, with 40 patients in each group. In addition to routine medication, the oral muscle training group was given Beckman oral muscle exercise training, the electrical stimulation group underwent low-frequency pulsed electrical stimulation treatment, while the observation group was provided with both. Before and after 4 weeks of treatment, the severity of salivation, the frequency of repeated empty swallowing, oral motor function, saliva secretion, and life quality of the three groups were evaluated using the Saliva Rating Scale (DRS), the Repeated Saliva Swallowing Test (RSST), oral motor function grading, the Parkinson′s Disease Saliva Clinical Scale (SCS-PD), saliva weighing, and the PD Quality of Life Scale (PDQ-39).Results:After the treatment the average DRS, SCS-PD, saliva weighing and PDQ-39 results of the observation group were significantly better than those before treatment and better than the other 2 groups′ averages. That group′s average RSST and oral motor function scores had increased significantly compared to before treatment, and compared with the other 2 groups′ averages at the same time point.Conclusions:Combining low-frequency pulsed electrical stimulation with Beckman oral muscle exercise can improve oral motor function, swallowing, and the life quality of PD patients who drool. It is more effective than electrical stimulation or oral muscle exercise training alone. Such combination therapy is worthy of clinical promotion and application.

Background::Computer-aided detection (CAD) software has been introduced to automatically interpret digital chest X-rays. This study aimed to evaluate the performance of CAD software (JF CXR-1 v3.0, which was developed by a domestic Hi-tech enterprise) in tuberculosis (TB) case finding in China.Methods::In 2019, we conducted an internal evaluation of the performance of JF CXR-1 v3.0 by reading standard images annotated by a panel of experts. In 2020, using the reading results of chest X-rays by a panel of experts as the reference standard, we conducted an on-site prospective study to evaluate the performance of JF CXR-1 v3.0 and local radiologists in TB case finding in 13 township health centers in Zhongmu County, Henan Province.Results::Internal assessment results based on 277 standard images showed that JF CXR-1 v3.0 had a sensitivity of 85.94% (95% confidence interval [CI]: 77.42%, 94.45%) and a specificity of 74.65% (95% CI: 68.81%, 80.49%) to distinguish active TB from other imaging conditions. In the on-site evaluation phase, images from 3705 outpatients who underwent chest X-ray detection were read by JF CXR-1 v3.0 and local radiologists in parallel. The imaging diagnosis of local radiologists for active TB had a sensitivity of 32.89% (95% CI: 22.33%, 43.46%) and a specificity of 99.28% (95% CI: 99.01%, 99.56%), while JF CXR-1 v3.0 showed a significantly higher sensitivity of 92.11% (95% CI: 86.04%, 98.17%) ( p < 0.05) and maintained high specificity at 94.54% (95% CI: 93.81%, 95.28%). Conclusions::CAD software could play a positive role in improving the TB case finding capability of township health centers.

Objective:To compare the efficacy of robot system-assisted versus freehand screw revision for ankylosing spondylitis (AS) with lower cervical fractures.Methods:A multicenter retrospective cohort study was conducted to analyze the clinical data of 57 patients with AS combined with lower cervical fractures admitted to Honghui Hospital Affiliated to Xi'an Jiaotong University School of Medicine, Henan Provincial People's Hospital, Zhengzhou Orthopedic Hospital, and Qilu Hospital of Shandong University, including 46 males and 11 females, aged 38-77 years [(65.4±9.5)years]. Injury segments involved C 3 in 7 patients, C 4 in 13, C 5 in 25, C 6 in 10, and C 7 in 2. All the patients underwent revision surgery, among whom, 22 patients were treated with robot system-assisted cervical pedicle screw placement (robot nailing group, with 190 screws), and 35 with freehand cervical pedicle screw placement (freehand nailing group, with 300 screws). The operative duration, intraoperative bleeding volume, frequency of intraoperative fluoroscopy, incision length, and length of hospital stay of the two groups were compared; the time of single nscrew insertion, the number of single nail revisions, the distance between screws and the anterior cortex, the accuracy of screw placement of grade 0 and grade 0+1 were recorded in the two groups. The visual analogue scale (VAS), Japanese Orthopedic Society (JOA) score, neck dysfunction index (NDI), American Spine Injury Association (ASIA) classification before operation, at 3 days, 3 months after operation and at the last follow-up were compared between the two groups. The complication rate was also noted. Results:All the patients were followed up for 12-16 months [(14.3±2.1)months]. The operative duration, intraoperative bleeding volume, and frequency of intraoperative fluoroscopy were (186.4±12.9)minutes, (486.1±68.6)ml, and (3.4±1.3)times in the robot nailing group, which were shorter or less than (206.7±14.4)minutes, (660.3±45.2)ml, and (13.5±3.6)times in the freehand nailing group ( P<0.01). The incision length was (9.4±2.4)cm in the robot nailing group, longer than (5.6±1.2)cm in the freehand nailing group ( P<0.01), and the length of hospital stay was (3.7±0.4)days, shorter than (4.4±1.4)days in the freehand nailing group ( P<0.01). The length of single nail insertion, the number of single nail revision, and the distance between the screws and the front cortex were (6.5±0.4)minutes, (1.1±0.1)times, and (3.5±1.3)mm in the robot nailing group, which were shorter or less than (11.6±0.2)minutes, (1.5±0.2)times, and (12.4±4.7)mm in the freehand nailing group ( P<0.01). The accuracy of the screw placement in the robot nailing group was 90.0% (171/190) and 95.8% (182/190) with level 0 and 0+1 screws, better than 80.0% (240/300) and 89.0% (267/300) in the freehand nailing group ( P<0.05). There was no significant difference in VAS, JOA score, NDI, or ASIA grading between the two groups before operation ( P>0.05). The VAS, JOA, and NDI scores at 3 days after operation were (3.1±0.6)points, (12.1±1.2)points, and (15.6±2.9)points, respectively in the robot nailing group, which were better than (5.0±1.4)points, (11.3±1.1)points and (22.5±3.7)points, respectively in the freehand nailing group ( P<0.05). No statistically significant difference was observed in the ASIA grade between the two groups at 3 days after operation ( P>0.05). There were no significant differences in VAS, JOA, NDI scores, or ASIA grading between the two groups at 3 months after operation and at the last follow-up ( P>0.05). Compared with those before operation, the VAS, JOA, NDI scores, and ASIA grading were significantly improved at 3 days, 3 months after operation and at the last follow-up in the two groups, which were further improved with the passage of time. Two patients in the robot nailing group had pneumonia, with a complication rate of 9% (2/22), while 2 patients in the freehand nailing group had dural sac rupture and cerebrospinal fluid leakage and 3 had lung infection after operation, with a complication rate of 14% (5/35) ( P<0.05). Conclusion:Compared with freehand nailing, the robot system-assisted nailing revision for AS with lower cervical fracture has more advantages in terms of the operative duration, length of hospital stay, intraoperative bleeding volume, frequency of intraoperative fluoroscopy nailing speed and accuracy, screw holding force, early pain relief, function restoration, and complication rate, despite longer surgical incision.

Objective:To investigate the risk factors of postoperative recurrence in patients with primary brain glioma and to construct a prediction model.Methods:A total of 98 patients with primary brain glioma treated by radical surgery in Nanchong Central Hospital from January 2018 to January 2021 were retrospectively included, and were divided into recurrent group (40 cases) and non-recurrent group (58 cases) according to whether there was recurrence or not during the follow-up period. The independent influencing factors for postoperative recurrence in patients with primary brain glioma were evaluated by multivariate logistic regression. Logistic prediction model of postoperative recurrence risk of patients with primary brain glioma was established, and the predictive efficacy of each index was calculated by receiver operator characteristic (ROC) curve.Results:There were statistically significant differences between recurrent group and non-recurrent group in glioma World Health Organization (WHO) grade ( χ2=12.48, P<0.001), isocitrate dehydrogenase (IDH) 1/2 mutation ( χ2=13.24, P<0.001), mean platelet volume (MPV) ( t=5.34, P<0.001), and MPV/platelet count (PLT) ( t=9.73, P<0.001). Multivariate analysis showed that WHO grade Ⅲ-Ⅳ ( OR=8.54, 95% CI: 1.62-44.99, P=0.011), IDH1/2 wild type ( OR=9.08, 95% CI: 1.68-49.19, P=0.010), low MPV ( OR=0.46, 95% CI: 0.21-0.99, P=0.048) and low MPV/PLT ( OR=0.02, 95% CI: 0.01-0.03, P<0.001) were independent risk factors for postoperative recurrence in patients with primary brain glioma. The logistic prediction model based on the above indicators was logit ( P) =11.78+2.15×WHO grade+2.21×IDH1/2 mutation situation-0.78×MPV-200.70×MPV/PLT ( R2=0.785). The ROC curve analysis results showed that WHO grade, IDH1/2 mutation, MPV, MPV/PLT, and logistic prediction model P-value could all be used to predict the risk of postoperative recurrence in patients with primary brain glioma; The areas under the curve were 0.681, 0.684, 0.783, 0.920 and 0.964, respectively. In the area under ROC curve comparison of each indicator, the predictive performance of the logistic regression model P-value was significantly higher than that of other indicators (all P<0.05) . Conclusion:Postoperative recurrence in patients with primary brain glioma may be related to glioma WHO grade, IDH1/2 mutation and platelet related laboratory indexes. The model constructed based on the above indicators can be used to predict the recurrence risk in patients with primary brain glioma after surgery.