OBJECTIVE To investigate the application status of prescription pre-review systems in healthcare institutions of Yunnan province， evaluate their system functions and management capabilities， and provide a practical basis for promoting rational drug use. METHODS A questionnaire survey was conducted among public healthcare institutions at or above the secondary level in Yunnan province to investigate the deployment status of the systems. A capability maturity assessment framework was constructed， encompassing 6 dimensions and 39 indicators， including real-time prescription review， prescription correlation review， rule setting， evidence-based information support， prescription authority management， and system operation management. This framework was then used to evaluate the institutions that had implemented the pre-review systems. RESULTS A total of 100 valid questionnaires were collected， with 37 institutions having adopted prescription pre-review systems， mainly tertiary hospitals. The system predominantly adopted a modular architecture and was embedded into the hospital information system through application programming interfaces and middleware， providing certain capabilities for real-time prescription risk identification. Evaluation results indicated that basic functions such as reviewing indications， contraindications， and drug compatibility performed well， while deficiencies remained in functions related to parenteral nutrition prescription， review of drug dosage for specific diseases， individual patient characteristic recognition， and rule setting. Moreover， the construction of review centers and establishment of management systems were also not well-developed. CONCLUSIONS The overall application rate of prescription pre-review systems in Yunnan province remains low. System functions and management mechanisms require further improvement. It is recommended to enhance information infrastructure in lower-level institutions and explore regionally unified review models to promote standardized and intelligent development of prescription review practices.

ObjectiveTo explore effect of Xianlian Jiedu prescription on the recurrence of colorectal cancer （CRC） and investigate the related mechanisms. MethodsA postoperative recurrence model was established in 25 Balb/c mice by injecting CT26 cells subcutaneously into the armpit， followed by surgical removal of 99% of the subcutaneous tumor. The mice were randomly divided into model group， low-dose Xianlian Jiedu prescription （XLJDP-L） group （6.45 g·kg^-1·d^-1）， medium-dose Xianlian Jiedu prescription （XLJDP-M） group （12.9 g·kg^-1·d^-1）， high-dose Xianlian Jiedu prescription （XLJDP-H） group （25.8 g·kg^-1·d^-1）， and 5-fluorouracil （5-FU） group （1×10^-3 g·kg^-1·d^-1）. The mice were euthanized after 14 days of continuous intervention， and recurrent tumor tissue was harvested. Hematoxylin and eosin （HE） staining was used to observe pathological and morphological changes in the recurrent tumor tissue. Immunohistochemistry （IHC） was employed to assess the expression of proliferating cell nuclear antigen （Ki67）， vascular endothelial growth factor （VEGF）， and platelet-endothelial cell adhesion molecule （CD31） in recurrent tumor tissue. The Western blot was used to detect the protein expression levels of angiopoietin-2 （ANG-2）， VEGF， phosphorylated-protein kinase B （p-Akt）， protein kinase B （Akt）， phosphorylated-phosphatidylinositol 3-kinase （p-PI3K）， and phosphatidylinositol 3-kinase （PI3K） in recurrent tumor tissue. ResultsBefore treatment， there were no statistical differences in tumor volume， tumor weight， and body mass among the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group compared to the model group， indicating model stability. After treatment， compared with those in the model group， the tumor volume and tumor weight in the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group were significantly reduced （P<0.01）， showing dose dependency. Meanwhile， there were no significant differences in body weight among the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group compared to the model group. HE staining showed that compared with that in the model group， tumor tissue in the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group had loosely arranged cells， increased intercellular spaces， small and shriveled nuclei， light staining， fewer mitotic figures and atypical nuclei， and increased necrotic areas. IHC showed that compared with those of the model group， the positive rates of Ki67， VEGF， and CD31 in the recurrent tumor tissue of the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group were significantly reduced （P<0.01） in a dose-dependent manner. Western blot results showed that compared with those of the model group， the protein expression levels of ANG-2 and VEGF in the recurrent tumor tissue of the XLJDP-L， XLJDP-M， and XLJDP-H groups and the 5-FU group were significantly downregulated （P<0.05， P<0.01）， and the p-Akt/Akt and p-PI3K/PI3K ratios were significantly decreased in a dose-dependent manner （P<0.05， P<0.01）. ConclusionXianlian Jiedu prescription significantly inhibits the recurrence of CRC in mice after subcutaneous tumor surgery. The mechanism may involve regulating the PI3K/Akt pathway and downregulating key angiogenic proteins such as ANG-2， VEGF， and CD31.

ObjectiveTo establish a rapid analytical method for identifying the differential components in Poria cocos medicinal materials based on ultra performance liquid chromatography-quadrupole-electrostatic field orbital trap high-resolution mass spectrometry（UPLC-Q-Orbitrap-MS）， combined with mass defect filtering（MDF） and molecular network integration techniques. MethodsUPLC-Q-Orbitrap-MS was used for MS data acquisition and identification of P. cocos medicinal materials， with the help of MDF for the study of cleavage behavior and structural identification of triterpenoids. According to the similarity of MS/MS fragmentation patterns of each component， global natural product social molecular network（GNPS） was established， and Cytoscape 3.6.1 was used to screen molecular clusters with similar structures and the the structure of main compound classes were identified and confirmed. Multivariate statistical analyses such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） were used to screen the differential components of the five P. cocos medicinal materials with the variable importance in the projection（VIP） value>1 and P<0.05 as the criteria. ResultsA total of 66 compounds were identified by database comparison， 8 compounds were newly identified by MDF， 28 compounds were newly identified by GNPS， and a total of 102 chemical compounds were identified， including 43 triterpenoids， 16 saccharides， 26 amino acids and peptides， 3 nucleosides， and 14 other compounds. Triterpenoids were predominant in Poriae Cutis and wild Fushen， amino acids and peptides were the most abundant in Poria and cultivated Fushen， carbohydrates were the most abundant in Poriae Cutis. Type Ⅰ and Ⅱ triterpenoids had higher amounts in Poria and cultivated Fushen， type Ⅲ triterpenoids were more abundant in Poriae Cutis， all four types of triterpenoids were higher in Fushenmu， and type Ⅰ， Ⅱ， and Ⅳ triterpenoids were higher in wild Fushen. A total of 12 common differential chemical constituents were screened， including serine， guanosine， gallic acid， 2-octenal， maltotriose， trametenolic acid， dehydroeburicoic acid， dehydrotrametenolic acid， poricoic acid A， poricoic acid B， poricoic acid E and G， but the relative contents of them varied significantly among different medicinal materials. ConclusionAmong the five P. cocos medicinal materials， the types of constituents are generally similar， but their relative contents differed significantly among these medicinal materials， especially in the distribution of triterpenoids. The integration of UPLC-Q-Orbitrap-MS， MDF and GNPS can provide a reference for the rapid qualitative analysis of other Chinese medicines.

ObjectiveTo establish a rapid analytical method for identifying the differential components in Poria cocos medicinal materials based on ultra performance liquid chromatography-quadrupole-electrostatic field orbital trap high-resolution mass spectrometry（UPLC-Q-Orbitrap-MS）， combined with mass defect filtering（MDF） and molecular network integration techniques. MethodsUPLC-Q-Orbitrap-MS was used for MS data acquisition and identification of P. cocos medicinal materials， with the help of MDF for the study of cleavage behavior and structural identification of triterpenoids. According to the similarity of MS/MS fragmentation patterns of each component， global natural product social molecular network（GNPS） was established， and Cytoscape 3.6.1 was used to screen molecular clusters with similar structures and the the structure of main compound classes were identified and confirmed. Multivariate statistical analyses such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） were used to screen the differential components of the five P. cocos medicinal materials with the variable importance in the projection（VIP） value>1 and P<0.05 as the criteria. ResultsA total of 66 compounds were identified by database comparison， 8 compounds were newly identified by MDF， 28 compounds were newly identified by GNPS， and a total of 102 chemical compounds were identified， including 43 triterpenoids， 16 saccharides， 26 amino acids and peptides， 3 nucleosides， and 14 other compounds. Triterpenoids were predominant in Poriae Cutis and wild Fushen， amino acids and peptides were the most abundant in Poria and cultivated Fushen， carbohydrates were the most abundant in Poriae Cutis. Type Ⅰ and Ⅱ triterpenoids had higher amounts in Poria and cultivated Fushen， type Ⅲ triterpenoids were more abundant in Poriae Cutis， all four types of triterpenoids were higher in Fushenmu， and type Ⅰ， Ⅱ， and Ⅳ triterpenoids were higher in wild Fushen. A total of 12 common differential chemical constituents were screened， including serine， guanosine， gallic acid， 2-octenal， maltotriose， trametenolic acid， dehydroeburicoic acid， dehydrotrametenolic acid， poricoic acid A， poricoic acid B， poricoic acid E and G， but the relative contents of them varied significantly among different medicinal materials. ConclusionAmong the five P. cocos medicinal materials， the types of constituents are generally similar， but their relative contents differed significantly among these medicinal materials， especially in the distribution of triterpenoids. The integration of UPLC-Q-Orbitrap-MS， MDF and GNPS can provide a reference for the rapid qualitative analysis of other Chinese medicines.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

ObjectiveTo explore the mechanism by which Buyang Huanwutang regulates the glutathione peroxidase 4 （GPX4）-acyl-CoA synthetase long-chain family member 4 （ACSL4） axis to inhibit ferroptosis and promote neurological functional recovery after spinal cord injury （SCI）. MethodsNinety rats were randomly divided into five groups： sham operation group， model group， low-dose Buyang Huanwutang group （12.5 g·kg^-1）， high-dose Buyang Huanwutang group （25 g·kg^-1）， and Buyang Huanwutang + inhibitor group （25 g·kg^-1 + 5 g·kg^-1 RSL3）. The SCI model was established by using the allen method. Tissue was collected on the 7th and 28th days after operation. Motor function was assessed by using the Basso-Beattie-Bresnahan （BBB） scale. Hematoxylin-eosin （HE）， Nissl， and Luxol fast blue （LFB） staining were performed to observe spinal cord histopathology. Transmission electron microscopy was used to examine mitochondrial ultrastructure. Immunofluorescence staining was used to detect the number of NeuN-positive cells and the fluorescence intensity of myelin basic protein （MBP）， GPX4， and ACSL4. Real-time fluorescent quantitative polymerase chain reaction （Real-time PCR） was used to analyze the mRNA expression of GPX4 and ACSL4. Enzyme linked immunosorbent assay （ELISA） was performed to measure the levels of reactive oxygen species （ROS）， malondialdehyde （MDA）， glutathione （GSH）， and superoxide dismutase （SOD）. Colorimetric assays were used to determine the iron content in spinal cord tissue. ResultsCompared to the sham operation group， the model group exhibited significantly reduced BBB scores （P<0.01）， severe pathological damage in spinal cord tissue， and marked mitochondrial ultrastructural disruption. In addition， the model group showed a decrease in the number of NeuN-positive cells （P<0.01）， reduced fluorescence intensity of MBP and GPX4 （P<0.01）， lower levels of GSH and SOD （P<0.01）， and downregulated mRNA expression of GPX4 （P<0.01）. Moreover， compared to the sham operation group， the model group had elevated levels of ROS， MDA， and tissue iron content （P<0.01）， along with increased fluorescence intensity and mRNA expression of ACSL4 （P<0.01）. Compared with the model group and Buyang Huanwutang + inhibitor group， the Buyang Huanwutang group showed significantly improved BBB scores （P<0.05， P<0.01） and exhibited less severe spinal cord tissue damage， reduced edema and inflammatory cell infiltration， increased neuronal survival， and more intact myelin structures. Additionally， mitochondrial ultrastructure was significantly improved in the Buyang Huanwutang group. Compared to the model group and Buyang Huanwutang + inhibitor group， the Buyang Huanwutang group significantly increased the number of NeuN-positive cells and the fluorescence intensity of MBP （P<0.05， P<0.01）. Furthermore， Buyang Huanwutang significantly increased the fluorescence intensity and mRNA expression of GPX4 （P<0.01） and decreased the fluorescence intensity and mRNA expression of ACSL4 （P<0.01） compared to the model group and Buyang Huanwutang + inhibitor group. Finally， the Buyang Huanwutang group significantly decreased ROS， MDA， and tissue iron content （P<0.01） and significantly increased GSH and SOD levels （P<0.01） compared to the model group and Buyang Huanwutang + inhibitor group. ConclusionBuyang Huanwutang inhibits ferroptosis through the GPX4/ACSL4 axis， reduces secondary neuronal and myelin injury and oxidative stress， and ultimately promotes the recovery of neurological function.

The 2024 World Conference on Lung Cancer (WCLC) and the European Society for Medical Oncology (ESMO) Annual Meeting, two of the most prestigious events in oncology, have concluded sequentially. As the most authoritative annual gatherings in lung cancer and the entire oncology field, the WCLC and ESMO conferences brought together top oncology experts and scientists from around the world to share, discuss, and publish the latest cutting-edge advancements in oncology. In both conferences, lung cancer immunotherapy remained a hot topic of considerable interest. This article aims to summarize and discuss the important research progress on perioperative immunotherapy for non-small cell lung cancer reported at the two conferences.

BACKGROUND:Studies have shown that metformin has anti-inflammatory,anti-tumor,anti-aging and vasoprotective effects,and can inhibit the progression of osteoarthritis,but its specific mechanism of action remains unclear. OBJECTIVE:To investigate the mechanism of metformin on cartilage protection in a rat model of osteoarthritis. METHODS:Forty male Sprague-Dawley rats were randomly divided into four groups(n=10 per group):blank,control,sham-operated,and metformin groups.The blank group did not undergo any surgery.In the sham-operated group,the joint cavity was exposed.In the model group and the metformin group,the modified Hulth method was used to establish the osteoarthritis model.At 1 day after modeling,the rats in the metformin group were given 200 mg/kg/d metformin by gavage,and the model,blank,and sham-operated groups were given normal saline by gavage.Administration in each group was given for 4 weeks consecutively.Hematoxylin-eosin staining,toluidine blue staining,and safranin O-fast green staining were used to observe the morphological structure of rat knee joints.Immunohistochemical staining and western blot were used to detect the protein expression of SOX9,type Ⅱ collagen,a disintegrin and metalloproteinase with thrombospondin motifs 5(ADAMTS5),Beclin1,P62,phosphatidylinositol 3-kinase(PI3K),p-PI3K,protein kinase B(AKT),p-AKT,mammalian target of rapamycin(Mtor),and p-Mtor in rat cartilage tissue. RESULTS AND CONCLUSION:The results of hematoxylin-eosin,toluidine blue and safranin O-fast green staining showed smooth cartilage surface of the knee joints and normal histomorphology in the blank group and the sham-operated group,while in the model group,there was irregular cartilage surface of the knee joint and cartilage damage,with a decrease in the number of chondrocytes and the content of proteoglycans in the cartilage matrix.In the metformin group,there was a significant improvement in the damage to the structure of the cartilage in the knee joints of the rats,and the cartilage surface tended to be smooth,with an increase in the number of chondrocytes and the content of proteoglycans in the cartilage matrix.Immunohistochemistry staining and western blot results showed that compared with the control and sham-operated groups,the expression of SOX9,type Ⅱ collagen,and Beclin1 proteins in the cartilage tissue of rats in the model group was significantly decreased(P<0.05).Conversely,the expression of ADAMTS5,P62,as well as p-PI3K,p-AKT,and p-Mtor proteins was significantly increased(P<0.05).Furthermore,compared with the model group,the expression of SOX9,type Ⅱ collagen,and Beclin1 proteins in the cartilage tissue of rats in the metformin group was significantly increased(P<0.05),while the expression of ADAMTS5,P62,as well as p-PI3K,p-AKT,and p-Mtor proteins was significantly decreased(P<0.05).To conclude,Metformin can improve the autophagy activity of chondrocytes and reduce the degradation of cartilage matrix in osteoarthritis rats by inhibiting the activation of PI3K/AKT/Mtor signaling pathway,thus exerting a protective effect on articular cartilage.

Objective To assess and understand the service capabilities and existing problems of radiation health technical service institutions in Jiangsu Province, China, and provide a basis for improving in-process and post-process supervision as well as enhancing radiation health technical service capabilities. Methods Thirty radiation health technical service institutions in Jiangsu Province were selected as quality monitoring objects from the National Occupational Health Technical Service Institution Management Information System. Evaluations were conducted using a standardized national assessment checklist, and a comprehensive risk assessment was performed by combining the results of laboratory test capability comparisons. Results The 30 institutions all passed the quality monitoring, with an average score of （76.62 ± 5.07）. Comprehensive risk assessment identified 8 (26.67%) high-risk institutions, 22 (73.33%) medium-risk institutions, and 0 (0%) low-risk institutions. Conclusion The overall service quality of radiation health technical service institutions in Jiangsu Province is acceptable. However, further training and supervision are needed to improve technical service capacity and reduce service risks.