ObjectiveBased on traditional quality evaluation of Gardeniae Fructus（GF） recorded in historical materia medica， this study systematically compared the quality differences between wild and cultivated GF from morphological characteristics， microscopic features， and contents of primary and secondary metabolites. MethodsVernier calipers and analytical balances were used to measure the length， diameter and individual fruit weight of wild and cultivated GF， and the aspect ratio was calculated. A colorimeter was used to determine the chromaticity value of wild and cultivated GF， and the paraffin sections of them were prepared by safranin-fast green staining and examined under an optical microscope to observe their microstructure. Subsequently， the contents of water-soluble and alcohol-soluble extracts of wild and cultivated GF were detected by hot immersion method under the general rule 2201 in volume Ⅳ of the 2020 edition of the Pharmacopoeia of the People's Republic of China， the starch content was measured by anthrone colorimetric method， the content of total polysaccharides was determined by phenol-sulfuric acid colorimetric method， the sucrose content was determined by high performance liquid chromatography coupled with evaporative light scattering detection（HPLC-ELSD）， and the contents of representative components in them were measured by ultra-performance liquid chromatography（UPLC）. Finally， correlation analysis was conducted between quality traits and phenotypic traits， combined with multivariate statistical analysis methods such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， key differential components between wild and cultivated GF were screened. ResultsIn terms of traits， the wild GF fruits were smaller， exhibiting reddish yellow or brownish red hues with significant variation between batches. While the cultivated GF fruits are larger， displaying deeper orange-red or brownish red. The diameter and individual fruit weight of cultivated GF were significantly greater than those of wild GF， while the blue-yellow value（b^*） of wild GF was significantly higher than that of cultivated GF. In the microstructure， the mesocarp of wild GF contained numerous scattered calcium oxalate cluster crystals， while the endocarp contained stone cell class round， polygonal or tangential prolongation， undeveloped seeds were visible within the fruit. In contrast， the mesocarp of cultivated GF contained few calcium oxalate cluster crystals， or some batches exhibited extremely numerous cluster crystals. The stone cells in the endocarp were predominantly round-like， with the innermost layer arranged in a grid pattern. Seeds were basically mature， and only a few immature seeds existed in some batches. Regarding primary metabolite content， wild GF exhibited significantly higher total polysaccharide level than cultivated GF（P<0.01）. In category-specific component content， wild GF exhibited significantly higher levels of total flavonoids and total polyphenols compared to cultivated GF（P<0.01）. Analysis of 12 secondary metabolites revealed that wild GF exhibited significantly higher levels of Shanzhiside， deacetyl asperulosidic acid methyl ester， gardenoside and chlorogenic acid compared to cultivated GF（P<0.01）. Conversely， the contents of genipin 1-gentiobioside， geniposide and genipin were significantly lower in wild GF（P<0.01）. ConclusionThere are significant differences between wild and cultivated GF in terms of traits， microstructure， and contents of primary and secondary metabolites. At present， the quality evaluation system of cultivated GF remains incomplete， and this study provides a reference for guiding the production of high-quality GF medicinal materials.

Objective: To explore the association between takeout fast foods and sugar sweetened beverage consumption with co-occurrence of anxiety and depressive symptoms among first year junior high school students in Yunnan Province, so as to provide theoretical basis for the prevention of anxiety and depressive symptoms co-occurrence among adolescents. Methods: A random cluster sampling involving 8 500 first year junior high school students in 11 counties in Yunnan Province was conducted by a questionnaire survey from October to December 2022. The Depression Anxiety Stress Scale-21 (DASS-21) was applied to assess anxiety and depressive symptoms in first year junior high school students. Chi-square test was used to compare the anxiety-depression co-occurrence symptoms of first year junior high school students with different demographic characteristics. The association between takeout fast foods and sugar sweetened beverage consumption with co-occurrence of anxiety and depressive symptoms of adolescents was analyzed by binary Logistic regression models. Results: The detection rate of co-occurrence of anxiety and depression symptoms among first year junior high school students in Yunnan Province was 26.92%. After controlling for demographic variables and other confounders, takeout fast foods and sugar sweetened beverage consumption( OR=1.50, 95%CI =1.27-1.77) was associated with anxiety-depression co-occurrence symptoms among first year junior high school students in Yunnan Province ( P <0.01). Stratified analysis showed that both Han ( OR=1.37, 95%CI =1.07-1.77) and ethnic minorities ( OR=1.60, 95%CI =1.29-2.00) exhibited statistically significant associations between takeout fast foods and sugar sweetened beverage consumption with co-occurrence of anxiety and depressive symptoms(both P <0.05). Conclusions Takeout fast foods and sugar sweetened beverage consumption increases the risk of co-occurrence of anxiety and depressive symptoms among first year junior high school students in Yunnan Province. It is recommended to strengthen guidance on the consumption of such products among junior high school students to prevent co-occurrence of anxiety and depressive symptoms.

Neurocritical care involves complex pathophysiological mechanisms, and its incidence is higher, injuries are more severe, and treatment is more challenging in high-altitude environments. This consensus, based on the latest domestic and international evidence-based medical data, establishes a standardized, goal-oriented framework for neurocritical care management applicable in high-altitude regions and nationwide. The consensus was developed following international standards for evidence quality assessment and underwent two rounds of Delphi expert consultation, resulting in 32 recommendation statements covering three parts: management systems, monitoring and assessment, and core strategies. Key updates include: advocating for the establishment of independent neurocritical care units and implementing precise tiered diagnosis and treatment based on the "Five Differences in Critical Care" concept; constructing a "trinity" multimodal brain monitoring system centered on cerebral blood flow, cerebral oxygenation, and brain function, emphasizing routine bedside transcranial Doppler ultrasound, cerebral oximetry, and continuous electroencephalography monitoring; shifting management strategies from mild hypothermia therapy to targeted temperature management, and defining the "446" target management pathway for the supercritical stage; emphasizing the assessment of static and dynamic cerebrovascular autoregulation functions through multimodal methods to achieve individualized optimal mean arterial pressure management; elevating cerebrospinal fluid management goals to the level of "glymphatic system" function maintenance; implementing a multidisciplinary collaborative, whole-process management model focusing on patients' long-term neurological functional outcomes; de-escalation criteria include multidimensional indicators such as recovery of brain structure, restoration of cerebrovascular autoregulation, improvement in cerebrospinal fluid dynamics, and reduction in biomarker levels; and integrating cutting-edge technologies like artificial intelligence into post-critical care management and rehabilitation planning. This consensus systematically integrates the entire process of neurocritical care management, reflecting the modern connotation of goal-oriented, dynamic, and multimodal integration in neurocritical care medicine. It aims to adapt to new trends such as deepening understanding of pathophysiological mechanisms, the integration of medicine and engineering, and the empowerment of artificial intelligence, thereby further advancing the discipline of critical care medicine.

Objective: To conduct a scoping review on the types, construction methods and predictive performance of health literacy prediction models based on machine learning methods, so as to provide the reference for the improvement and application of such models. Methods: Publications on health literacy prediction models conducted using machine learning methods were retrieved from CNKI, Wanfang Data, VIP, PubMed and Web of Science from inception to May 1, 2024. The quality of literature was assessed using the Prediction Model Risk of Bias ASsessment Tool. Basic characteristics, modeling methods, data sources, missing value handling, predictors and predictive performance were reviewed. Results: A total of 524 publications were retrieved, and 22 publications between 2007 and 2024 were finally enrolled. Totally 48 health literacy prediction models were involved, and 25 had a high risk of bias (52.08%), with major issues focusing on missing value handling, predictor selection and model evaluation methods. Modeling methods included regression models, tree-based machine learning methods, support vector machines and neural network models. Predictors primarily encompassed factors at four aspects: individual, interpersonal, organizational and society/policy aspects, with age, educational level, economic status, health status and internet use appearing frequently. Internal validation was conducted in 14 publications, and external validation was conducted in 4 publications. Forty-two models reported the areas under the receiver operating characteristic curve, which ranged from 0.52 to 0.983, indicating good discrimination. Conclusion Health literacy prediction models based on machine learning methods perform well, but have deficiencies in risk of bias, data processing and validation.

Triple-negative breast cancer (TNBC) represents a distinctive subtype, characterized by the absence of estrogen receptors, progesterone receptors, and human epidermal growth factor receptor 2 (HER2). Due to its high inter-tumor and intra-tumor heterogeneity, TNBC poses significant chanllenges for personalized diagnosis and treatment. The advant of clustered regular interspaced short palindromic repeats (CRISPR) technology has profoundly enhanced our understanding of the structure and function of the TNBC genome, providing a powerful tool for investigating the occurrence and development of diseases. This review focuses on the application of CRISPR/Cas technology in the personalized diagnosis and treatment of TNBC. We begin by discussing the unique attributes of TNBC and the limitations of current diagnostic and treatment approaches: conventional diagnostic methods provide limited insights into TNBC, while traditional chemotherapy drugs are often associated with low efficacy and severe side effects. The CRISPR/Cas system, which activates Cas enzymes through complementary guide RNAs (gRNAs) to selectively degrade specific nucleic acids, has emerged as a robust tool for TNBC research. This technology enables precise gene editing, allowing for a deeper understanding of TNBC heterogeneity by marking and tracking diverse cell clones. Additionally, CRISPR facilitates high-throughput screening to promptly identify genes involved in TNBC growth, metastasis, and drug resistance, thus revealing new therapeutic targets and strategies. In TNBC diagnostics, CRISPR/Cas was applied to develop molecular diagnostic systems based on Cas9, Cas12, and Cas13, each employing distinct detection principles. These systems can sensitively and specifically detect a variety of TNBC biomarkers, including cell-specific DNA/RNA and circulating tumor DNA (ctDNA). In the realm of precision therapy, CRISPR/Cas has been utilized to identify key genes implicated in TNBC progression and treatment resistance. CRISPR-based screening has uncovered potential therapeutic targets, while its gene-editing capabilities have facilitated the development of combination therapies with traditional chemotherapy drugs, enhancing their efficacy. Despite its promise, the clinical translation of CRISPR/Cas technology remains in its early stages. Several clinical trials are underway to assess its safety and efficacy in the treatment of various genetic diseases and cancers. Challenges such as off-target effects, editing efficiency, and delivery methods remain to be addressed. The integration of CRISPR/Cas with other technologies, such as 3D cell culture systems, human induced pluripotent stem cells (hiPSCs), and artificial intelligence (AI), is expected to further advance precision medicine for TNBC. These technological convergences can offer deeper insights into disease mechanisms and facilitate the development of personalized treatment strategies. In conclusion, the CRISPR/Cas system holds immense potential in the precise diagnosis and treatment of TNBC. As the technology progresses and becomes more costs-effective, its clinical relevance will grow, and the translation of CRISPR/Cas system data into clinical applications will pave the way for optimal diagnosis and treatment strategies for TNBC patients. However, technical hurdles and ethical considerations require ongoing research and regulation to ensure safety and efficacy.

Collagen is a major structural protein in the matrix of animal cells and the most widely distributed and abundant functional protein in mammals. Collagen’s good biocompatibility, biodegradability and biological activity make it a very valuable biomaterial. According to the source of collagen, it can be broadly categorized into two types: one is animal collagen; the other is recombinant collagen. Animal collagen is mainly extracted and purified from animal connective tissues by chemical methods, such as acid, alkali and enzyme methods, etc. Recombinant collagen refers to collagen produced by gene splicing technology, where the amino acid sequence is first designed and improved according to one’s own needs, and the gene sequence of improved recombinant collagen is highly consistent with that of human beings, and then the designed gene sequence is cloned into the appropriate vector, and then transferred to the appropriate expression vector. The designed gene sequence is cloned into a suitable vector, and then transferred to a suitable expression system for full expression, and finally the target protein is obtained by extraction and purification technology. Recombinant collagen has excellent histocompatibility and water solubility, can be directly absorbed by the human body and participate in the construction of collagen, remodeling of the extracellular matrix, cell growth, wound healing and site filling, etc., which has demonstrated significant effects, and has become the focus of the development of modern biomedical materials. This paper firstly elaborates the structure, type, and tissue distribution of human collagen, as well as the associated genetic diseases of different types of collagen, then introduces the specific process of producing animal source collagen and recombinant collagen, explains the advantages of recombinant collagen production method, and then introduces the various systems of expressing recombinant collagen, as well as their advantages and disadvantages, and finally briefly introduces the application of animal collagen, focusing on the use of animal collagen in the development of biopharmaceutical materials. In terms of application, it focuses on the use of animal disease models exploring the application effects of recombinant collagen in wound hemostasis, wound repair, corneal therapy, female pelvic floor dysfunction (FPFD), vaginal atrophy (VA) and vaginal dryness, thin endometritis (TE), chronic endometritis (CE), bone tissue regeneration in vivo, cardiovascular diseases, breast cancer (BC) and anti-aging. The mechanism of action of recombinant collagen in the treatment of FPFD and CE was introduced, and the clinical application and curative effect of recombinant collagen in skin burn, skin wound, dermatitis, acne and menopausal urogenital syndrome (GSM) were summarized. From the exploratory studies and clinical applications, it is evident that recombinant collagen has demonstrated surprising effects in the treatment of all types of diseases, such as reducing inflammation, promoting cell proliferation, migration and adhesion, increasing collagen deposition, and remodeling the extracellular matrix. At the end of the review, the challenges faced by recombinant collagen are summarized: to develop new recombinant collagen types and dosage forms, to explore the mechanism of action of recombinant collagen, and to provide an outlook for the future development and application of recombinant collagen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.